Excel Services Refresh Error

I am passing ID an integer value to Excel-web-access web part in a page.
http://server/excel.aspx?ID=100
The value is reaching correctly and displayed on A1 cell of sheet. But the automatic-refresh is not happening.
(I am using the ID cell value to refresh a table)
I am getting error: WE ARE UNABLE TO REFRESH ONE OR MORE DATA CONNECTIONS
How to get refresh done?

Hi Sunil, I don't believe you can refresh an Excel web part that way. The refresh has to happen on the browser side, not within the web app or Excel.
cameron rautmann

Similar Messages

Excel Services Refresh method not working in Sharepoint 2013

Hi,
In our application, we open excel services workbook in sharepoint 2013. Using sessionid of the workbook, we called Refresh and CalculateWorkbook methods in that order. After Calculateworkbook method, I see time stamps in LastUpdatedTime for each connection
in 'Connections' tab of excel workbook. When Refresh method is called again after CalculateWorkbook method, the LastUpdatedTime for the connections becomes blank.
When I use sharepoint 2010, the temstamp is not becoming blank after refresh.
I think due to this reason we see blank data on our reports. Can somebody tell whether there is a problem with Refresh method in sharepoint 2013? Or is there somebody facing problem with excel services in sharepoint 2013? Any pointers can help.
Thanks,
Pranava

Hi，
For your issue, verify if Excel files are rendered by Office Web Apps:
When Office Web Apps is responsible for the rendering the URL will look something like this:
https://server/_layouts/15/WopiFrame.aspx?sourcedoc=/Documents/excel.xlsx&….
And when Excel Calc is rendering the document it should look like the following:
https://server/_layouts/15/xlviewer.aspx?id=/Documents/excel.xlsx&…
Here is an article about how to enable pdf preview with OWA:
http://www.wictorwilen.se/sharepoint-2013-enabling-pdf-previews-with-office-web-apps-2013-march-2013-update
Besides, refer to configure Office Web Apps for SharePoint 2013:
https://technet.microsoft.com/en-us/library/ff431687.aspx
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Excel Services 2010 Error - "The workbook cannot be opened."

I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads. The trusted
file locations are set up appropriately. We are using Kerberos authentication.
My event viewer showed this "Critical" event (ID: 3760):
SQL Database 'Prod_WSS_Content' on SQL Server instance 'servername' not found. Additional error information from SQL Server is included below.
Cannot open database "Prod_WSS_Content" requested by the login. The login failed. Login failed for user 'domain\user'.
In other words, the service account that ECS was running under did not have permission to the content database. So I granted the user read permission on the database. Then I got the same error and this "Error" level event in the event viewer (ID: 5617):
There is a compatibility range mismatch between the Web server and database "Prod_WSS_Content", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
This error is typically associated with 2007 to 2010 upgrades apparently, but I did a fresh 2010 installation on a pristine machine. I found a very helpful post on the subject on the MSDN blogs:http://blogs.msdn.com/b/jjameson/archive/2010/05/04/the-workbook-cannot-be-opened-error-with-sharepoint-server-2010-and-tfs-2010.aspx
I gave the ECS service account db_owner permission on the content database. I'm still getting the error "The workbook cannot be opened." I ran the PowerShell commands listed at the bottom of the post, and no change.
What's interesting now, is that nothing at all is showing up in the event
viewer. I wonder if it is because of the statement in the event log that says "connections to the data have been blocked due to this incompatibility." Is there something on the SharePoint server blocking the connection to SQL Server that needs to be reset?
Rob Wilson - MCT. MCTS, MCITP SharePoint. http://sharepointblog.kellerschroeder.com http://www.therobman.com/blog

Hi Rob Wilson,
I suggest you to check the following things at first:
1.
What’s the version of the excel file? Excel 2003, Excel 2007 or Excel 2010? Excel Service doesn’t support Excel 2003 and easier version;
2.
Are there some features the Excel Service do not support?
More information about the Supported and Unsupported Features
http://msdn.microsoft.com/en-us/library/ff595319.aspx
3.
If the excel is connected to SQL, did you save the connect file to the Data Connection Library?
Shared your views.

Excel Services 2013 Bug - Automatic or Periodic Data Refreshes Doesnt Update

All,
I have heard from other colleagues that there is a problem with SP2013 Excel Services Automatic Refresh. Specifically, when you set the data connection properties to
Refresh data when opening a file, no error is generated upon open, but it DOES NOT refresh the spreadsheet with new data.
Manual Refresh First. What I did to test this was configure an AS tabular model with AdventureWorksDW as the data source. Loaded the AdventureWorks Tabular project. Created an ODC pointing to the resulting cube instance.
(Made all of the required Excel Services configurations.) Then pointed a workbook to this data source to populate a Pivot Table. Saved it to SharePoint in a trusted location. ODC saved to SharePoint in a trusted data connection library. Finally,
I configured the connection properties to NOT Refresh data when opening the file. Saved it. Go to my in browser Excel Services file, and click
Data | Refresh All Connections. WORKS! Great.
Next up: Automatic Data Refresh. I made a copy of the same workbook. Connected to the same data connection file. Went into the properties of the connection on the copied workbook and checked
Refresh data when opening the file. Saved. Updated relational data in database. Reprocessed the tabular model. Re-opened the Automatic refresh workbook. Numbers stay the same.
I've tried also setting Refresh every setting on
Usage tab of Connection Properties dialog to low number. No change. Tried reducing the Excel Services External Data Cache Lifetime auto refresh setting to 10 seconds. Nothing, no change. Nothing seems to work to get Auto refresh
working. Manual refresh works great. Has anyone else seen this bug? Is there a hot fix? Anyone know if there is something else to try?
UPDATE: In the ULS log, what we see if the following line:
BaseWorkbook.PrepareConnectionsAsync: Refresh skipped. Could not find the data connection name - defaulting to previous state. sessionId=..., dataconnection=
Note: the dataconnection value at the end is empty.

Hi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Cannot refresh data in Excel Services with SQL Azure databases

I am using Excel Services on a SharePoint Online.
I get my data from a SQL Azure. When i create my Excel repor with Excel 2013 pro I have no problem. So I upload my file on my Sharepoint and try to refresh data.
Connexion : Power Query - RPT_Event_ByEventType
Erreur : Erreur sur site (OnPremise) : Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI
admin to register the data source in the Power BI admin center.
I do not understad why I get that error because my data source is on Azure why It told me "OnPremise" ?

hi,
>> this button of excel gets just address of web and have button for import it
i test it by rest API project , but doesn't work, do you know how it is work?
Do you mean that you don't know how to get the table? You may input the site address into the address box, and then click go button nearby, select the table you want to import into the Excel. Then click import button.That also works for rest API,
and your rest API should get the data that you want
By the way, this is the forum for discussions about Excel develop(VBA ,customization), better to go to TechNet forum for Excel for Excel features question, so that you could get more professional help.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error occurred while accessing application id Excel services application unattended service account from secure store service

Hi,
I follow up the book "Professional SharePoint 2013 Administration" to build the SharePoint 2013 BI include Excel Services. and created the Secure Store services to save the user SP_Install for member.
For Now, I can upload the worksheet and open it in browser, but when I tried to refresh it, the SP 2013 show error "Error occurred while accessing application id Excel services application unattended service account from secure store service".
does anybody can help ? and do I need to turn on C2WTS ?
Thanks
James Liang

Hi James,
Excel Services can be used with Secure Store in three primary scenarios:
Unattended Service Account
Embedded Connections
External Data Connections
If you haven't configure unattended service account yet, you could refer to the article below:
http://technet.microsoft.com/en-us/library/hh525344(v=office.15).aspx
More information:
http://technet.microsoft.com/en-us/library/ff191191(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

"Access was denied" trying to refresh Excel Services report data

Project Server 2010
In an Excel Services report, using a sample ODC file I've changed only trivially, during Data / Refresh All Connections:
Access was denied by the external data source. The following connections failed to refresh:
The short...
I've narrowed it down to the Data Refresh attempting to login with the
User ID of the connection string in the ODC file instead of the
credentials of the TargetApplication specified as the SSS ID. SQL
Server logs confirm this.
Why does Excel Services refuse to use the TargetApplication
credentials and continuously attempt to use the User ID in the
connection string (but only for ODC's that have been slightly modified - see below)?
The long...
Excel Services, Secure Store, the Target
Application:"ProjectServerApplication", Trusted File Locations, Trusted
Data Connection Libraries, a db_datareader Database user, and
Credentials for the Target Application have all been setup
and configured.
Accessing the Sample report "SimpleProjectsList" is successful.
Adding a project, then "Data / Refresh All Connections" works and shows
the new project.
To verify; changed the credentials on the TargetApplication
"ProjectServerApplication" to something invalid, iisreset, Data /
Refresh All Connections, correctly failed.
Set credentials correct and everything works fine again.
So that report is definitely using the TargetApplication, and the TargetApplication is definitely set with proper credentials.
Now the issue:
Creating any ODC file from scratch causes "Access was denied..". Exporting the SimpleProjectsList ODC, making no changes,
uploading it, creating a report based on it - Access was denied.
Editing the SimpleProjectsList
Excel file and removing a single space in the SQL to cause the ODC to
get detached. Save As different report, open new report, refresh data -
Access was denied.
When looking at the SQL logs, with each "Access was denied" was a "Login failed for user 'joeblow'. ..."
'joeblow' is the SQL Server user configured in the data connection string for User ID that is for use directly in Excel - NOT the TargetApplication.
I can reproduce the exact same scenario using an unattended service account.
Why does Excel Services refuse to use the TargetApplication credentials?
Thanks-
Mike

Hi Mike,
I think this issue shouldn't be related to SharePoint running in Azure, could you please check the SharePoint ULS log (may enable Verbose level log) if there are more detailed errors for helping to solve this issue?
Meanwhile please also check if the data connection file is setup correctly per the following article.
http://whitepages.unlimitedviz.com/2010/12/connecting-to-cubes-and-external-data-with-excel-in-sharepoint/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support contact [email protected]
Daniel Yang
TechNet Community Support

Call to Excel Services returned an error.

In our on-prem environment, inside a document library i uploaded an excel powerpivot model(created by exporting data from two sharepoint list in the same site). Now i have configured data refresh for the excel file, but it's failing with the following error:Call
to Excel Services returned an error.
In ULS log files, i got this
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: ECS failed with non-zero return status. First error is name='ExternalDataRefreshFailed'; message='An
error occurred while working on the Data Model in the workbook. Please try again. We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: DataFeed_3_datacollect-taxdemos-com
items '; severity='Error' at Microsoft.AnalysisServices.SPClient.ExcelApi.ValidateStatus(Status[] status) at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
--- End of inner exception stack trace --- at Microsoft.AnalysisSe...
...rvices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall) at Microsoft.AnalysisServices.SPClient.ExcelApi.Call(String fileUrl, ExcelServiceCall serviceCall, String methodName, Object[] parameters) at Microsoft.AnalysisServices.SPAddin.DataRefresh.DataRefreshService.ProcessingJob(Object
parameters)
Can anybody help on how to fix this issue?
Please mark a post helpful/answer if it is really helpful or answer your query

Hi Atijit,
Do you have any update?
Best Regards,
Eric
Eric Tao
TechNet Community Support

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Excel Services with SharePoint List Data in SharePoint 2013 - Chart is not refreshing automatically

Hi Everyone,
This is My req: I m going to display pie chart and Bar chart in share point 2013.
Steps I have follwed:
1. Export the list to excel.
2.Using the Power Pivot table I have done the chart.
3. Uploaded into document Library.
4. Added into the web part.
Chart are displaying. But When ever user added the data into the list chart is refreshing.
Is there any option to refresh the data in chart? Waiting for valuable replies.
Regards, Manoj Prabakar

SharePoint lists as data sources in Excel Services is not supported.That's the reason refreshing is not working. There are some work around you can use -
Export as Data Feed - Export your SharePoint list as Data Feed , use this data feed to a PowerPivot for Excel workbook and publish this PowerPivot using Excel Services.
User-defined functions - write UDF in C# and extend the Excel Services functionality to work with SharePoint lists.
https://msdn.microsoft.com/library/bb267252(office.12).aspx#Office2007ExcelServicesUnlimited_SharePointLists
Web Services API -
The Web Services API can be used to push data from a database and then refresh the data in a SharePoint Server list by using Excel Services.
JavaScript Object Model - The JavaScript Object Model for Excel Services in Microsoft SharePoint Server 2010 provides many solutions for Excel Services.
More details -
https://technet.microsoft.com/en-us/library/gg576960.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Getting error while submitting data to excel workbook through excel services in InfoPath 2010

Hi,
I have a requirement where in have to fetch the calculated values from the excel workbook through InfoPath 2010 form.
When I am submitting cell value to excel workbook using SetCellA1 by executing following action:
"Submit using data connection: dataconnection"
I am unable to submit form. It is giving "there has been an error while processing the form" in the front end. I checked the event viewer and it displayed following exception:
There was a form postback error. (User: xxxx, Form Name: yyyyyyyy, IP: , Request:
http://asadadsas Request Form Template.xsn&SaveLocation=/somelocation, Form ID: urn:schemas-microsoft-com:office:infopath:formname:-myXSD-2010-09-20T15-02-34, Type: KeyNotFoundException, Exception Message: The given key was
not present in the dictionary.)
I was successfully able to submit the form using InfoPath client but it is giving error in the browser.
Is there any way or configuration that I should do to resolve this issue.
Any suggesttion would be of great help.
Thanks,
Sharepoint Consultant from NY, USA

I have exactly the same problem. The form is supposed to be submitted to the SOAP Web service (http://servername/_vti_bin/ExcelService.asmx) using the SetCellA1 operation, works fine in InfoPath Filler, but when I try to submit it in the browser, I get this
error:
There was a form postback error. (User: WINGTIP\Administrator, Form Name: NewEventForms, IP: , Request: http://intranet.wingtip.com/et/_layouts/FormServer.aspx?XsnLocation=http://intranet.wingtip.com/et/NewEventForms/Forms/template.xsn&SaveLocation=http://intranet.wingtip.com/et/NewEventForms&Source=http://intranet.wingtip.com/et/NewEventForms/Forms/AllItems.aspx&DefaultItemOpen=1,
Form ID: urn:schemas-microsoft-com:office:infopath:NewEventForms:-myXSD-2011-12-29T18-18-45, Type: KeyNotFoundException, Exception Message: The given key was not present in the dictionary.)
followed by
Unhandled exception when rendering form on postback System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.DatabaseHelper.GetSchemaXml(String namespaceUri, Solution solution, String dataObjectName, SchemaNavigator& schema, XPathNavigator& originalSchema, XmlNamespaceManager& namespaceManager)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.PartFragmentHelper.IsDataSetNode(Solution solution, XPathNavigator node)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.PartFragmentHelper.ApplyPartFragmentGather(DataAdapter adapter, XPathNavigator sourceDOM, DataObjects dataObjects, XPathNavigator targetDOM, PartFragment[] partFragments, Boolean[]& areDataSets)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.DataAdapterWebServiceSubmit.Execute(Document document, Uri soapAction, Uri serviceUrl, XPathNavigator querySubDOM, XPathNavigator resultsSubDOM, XPathNavigator errorsSubDOM, Int64 timeout, DataAdapterCredentials
credentials, Boolean useDcl, Boolean useProxy, Boolean useSelf)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.DataAdapterWebServiceSubmit.ExecuteInternal(XPathNavigator queryFields, XPathNavigator resultFields, XPathNavigator errors)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.RuleAction.EvaluateExpression(Document document, XPathNavigator currentTarget)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.RulesRuleSet.EvaluateExpression(Document document, XPathNavigator targetNavigator)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.Document.ExecuteDefaultSubmitAction()
at Microsoft.Office.InfoPath.Server.SolutionLifetime.ButtonSubmit.Click(Document document, XPathNavigator container)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.EventClick.Play(Document document, BindingServices bindingServices, EventLogProcessor eventLogProcessor)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.EventLogProcessor.ExecuteLog(Int32 expectedEventLogID)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.Document.<>c__DisplayClass13.<PlayEventLog>b__11()
at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)
What might be wrong? Are there any InfoPath configurations that need to be done? And, do I need to save the connection to the Excel Service Service Application to a connection file?
Thanks,
Boris

Excel service error in sharepoint 2013

i have sharepont server 2013 installed on 64 bit machine ,i have document center site which have many excel sheets
i tried to open an excel sheet xlsx on browser unsing excel web access but it gaves me the following error message
Excel Services Sorry we are sorry.we ran into a problem completeing your request.please try that again in afew mintues
i google this error and i configured excel services then added the site url in trusted site location then restart iis
and try again but the problem did not solve any suggestions?

Link 1
Link
2
Hope This Link Help YOu
DushYant'

System.InvalidOperationException: Call to Excel Services returned an error. --- Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry. We ran into a problem completing your request

0
HI All,
I am having problem with the power pivot dashboard.
power pivot dashboard processing job fails with the follwoing error message.
SP 2013 with 2008 r2
SQL 2014 power pivot on new analysis server.
Data refersh of cube and database works finw form the power pivot gallery.
The Execute method of job definition Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob (ID 726034a7-b9a9-45a6-b720-640b3f785e49) threw an exception. More information
is included below. Call to Excel Services returned an error.
ULS error:
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry.
We ran into a problem completing your request. ---> Microsoft.Office.Excel.Server.WebServices.ExcelServerApiException: We're sorry. We ran into a problem completing your request.
at Microsoft.Office.Excel.Server.WebServices.ApiShared.ExecuteServerSessionMethod(Boolean hasSessionId, String sessionId, CoreServerSessionMethod coreWebMethod, String name,
Boolean skipFeatureCheck)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookInternal(String workbookPath, Boolean editingMode, String uiCultureName, String dataCultureName, Boolean
newWorkbook, Boolean suppressRefreshOnOpen, Boolean openExclusive, Status[]& status)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookEx(String workbookPath, String uiCultureName, String dataCultureName, Boolean exclusive, Status[]&
status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.<>c__DisplayClassa.<OpenWorkbookEx>b__9(ExcelService svc, Status[]& status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)     -
-- End of inner exception stack trace ---     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall, String methodName, Object[] parameters)
at Microsoft.AnalysisServices.SPClient.ExcelApi.OpenWorkbookEx(String fileUrl, String uiCultureName, String dataCultureName, Boolean exclusive)
at Microsoft.AnalysisServices.SPClient.ASSPClientProxy.OpenWorkbookModelForRefresh(String workbookPath, SessionLifetimePolicy lifetimePolicy)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.RefreshUsageCube(GeminiServiceApplication application)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.Execute(Guid targetInstanceId)
Thanks
Ravi

HI Ravi,
Did you find the solution?
Thanks in advance
Regards,
Faraz Javaid

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Excel Services Refresh Error

Similar Messages

Maybe you are looking for