Exception /CCM/CX_MAPPING_DELETION_FAILD occurred (program: /CCM/CL_MAPPING

Dear all,
I have uploaded master catalog with full indicator.
It was uploaded .
Now while mapping the supllier catalog to master catalog the below error came.
Exception /CCM/CX_MAPPING_DELETION_FAILD occurred (program: /CCM/CL_MAPPING
Please guide me so that i can move further to publish.
Regards
Amit

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

Exception /CCM/CL_PE_REQUEST_SERVICE while publishing (CCM)

Dear gurus,
We have a problem when publishing a CCM catalog. The following message appears: "The
exception occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, Include /CCM/CL_PE_REQUEST_SERVICE====CM00F, line: 141) ".
I have checked TREX indexes and they are ok.
We have not found which is causing this problem.
I would appreciate your help.
Kind Regards,
SBonilla

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Unable to resolve the exception READ_REPORT_LINE_TOO_LONG in Abap program.

Hi,
I am getting the exception READ_REPORT_LINE_TOO_LONG in my abap program.Given below is the full analysis of the exception and then the program code :-
Error Analysis :-
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZANI_TEST_INTERACTIVE_ALV" from the
database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
91 characters wide.
Program Code :-
*& Report ZANI_TEST_INTERACTIVE_ALV
REPORT ZANI_TEST_INTERACTIVE_ALV.
TABLES: LFA1.
TYPE-POOLS: slis.
DATA: it_lfa1 TYPE TABLE OF lfa1,
      wa_lfa1 TYPE lfa1,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE input.
SELECT-OPTIONS: acc_no FOR LFA1-LIFNR.
SELECTION-SCREEN END OF BLOCK input.
START-OF-SELECTION.
IF NOT acc_no IS INITIAL.
    SELECT * FROM LFA1
      INTO CORRESPONDING FIELDS OF TABLE it_lfa1
      WHERE LIFNR IN acc_no.
ELSE.
    SELECT * FROM LFA1
      INTO CORRESPONDING FIELDS OF TABLE it_lfa1.
ENDIF.
PERFORM form_build_fieldcatalog USING 'IT_LFA1' CHANGING it_fieldcat.
PERFORM form_display_alv USING it_lfa1 it_fieldcat.
*&      Form form_build_fieldcatalog
      text
     -->P_0058   text
     <--P_IT_FIELDCAT text
form form_build_fieldcatalog using    p_it_tabname TYPE slis_tabname
                              changing p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME               = sy-repid
      I_INTERNAL_TABNAME           = p_it_tabname
    I_STRUCTURE_NAME             =
    I_CLIENT_NEVER_DISPLAY       = 'X'
      I_INCLNAME                   = sy-repid
    I_BYPASSING_BUFFER           =
    I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = p_it_fieldcat
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
      OTHERS                       = 3
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " form_build_fieldcatalog
*&      Form form_display_alv
      text
     -->P_IT_LFA1 text
form form_display_alv using p_it_lfa1 LIKE it_lfa1 p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = sy-repid
    I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    I_CALLBACK_TOP_OF_PAGE            = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    I_CALLBACK_HTML_END_OF_LIST       = ' '
    I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      =
    I_GRID_SETTINGS                   =
    IS_LAYOUT                         =
      IT_FIELDCAT                       = P_it_fieldcat
    IT_EXCLUDING                      =
    IT_SPECIAL_GROUPS                 =
    IT_SORT                           =
    IT_FILTER                         =
    IS_SEL_HIDE                       =
    I_DEFAULT                         = 'X'
    I_SAVE                            = ' '
    IS_VARIANT                        =
    IT_EVENTS                         =
    IT_EVENT_EXIT                     =
    IS_PRINT                          =
    IS_REPREP_ID                      =
    I_SCREEN_START_COLUMN             = 0
    I_SCREEN_START_LINE               = 0
    I_SCREEN_END_COLUMN               = 0
    I_SCREEN_END_LINE                 = 0
    I_HTML_HEIGHT_TOP                 = 0
    I_HTML_HEIGHT_END                 = 0
    IT_ALV_GRAPHICS                   =
    IT_HYPERLINK                      =
    IT_ADD_FIELDCAT                   =
    IT_EXCEPT_QINFO                   =
    IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
    E_EXIT_CAUSED_BY_CALLER           =
    ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = p_it_lfa1
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " form_display_alv
Please suggest a solution for this problem.. Thanks in advance.

hi,
it is getting because of fieldcat hear ur internal table is having all fields in lfa1, lfa1 is having more fileds alv cont display that much fields at a time . for that u are getting that messgae . u can solve this problem by filling fieldcat table manuvally insted of by FM 'fieldcat_merge'. fill filedcat table some fields which are need to display by manuvally.
thanq,
rajesh.k

Error Message: "You have hit a breakpoint exception - error has occurred"

I keep getting an error message that reads "You have hit a breakpoint exception - error has occurred. Click 'OK' to terminate. Click 'Cancel' to debug."
Both options close the program, and cause loss of unsaved work. Any thoughts on how to troubleshoot?

What version of Photoshop Elements? Include the minor version number (e.g., Photoshop Elements 9 with the 9.0.3 update).
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
If you are getting error message(s), what is the full text of the error message(s)?
What were the exact steps you were doing when the problem occurred?
Has this ever worked before? If so, what changes have you made just before the problem started?
What other software are you running?
Tell us about your computer hardware. How much RAM? How much free space on your system (C:) drive?
Ken

System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
It then gives me an error log of ;
2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
2015-04-23 14:44:06Z: Info: Exitcode = 0
2015-04-23 14:44:06Z: Info: Logging ended.
I have installed this software succesfully on other machines previously.....

Hi RyanWelsh78,
This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: SYS-170101 System Exception Signal 6 occurred in the context.

Hi,
The following error appears while executing a job.
SYS-170101 System Exception <Signal 6> occurred in the context.
DS version: BOXI 3.2
Source: Oracle
Target SAP BW
Job Server is on AIX
Has anybody dealt with this error? Any suggestions wil be a great help.
Thanks in advance.
Hitesh

Hi Expert,
I am also facing same error, can anyone please let help in it?

SEVERE: An exception or error occurred in the container during the request

hi
I am using tomcat 4.0 as for my serlvets. I get below exception when processing a request. Please let me know under what conditions do we get such exception
Aug 31, 2005 12:20:28 PM org.apache.coyote.tomcat5.CoyoteAdapter service
SEVERE: An exception or error occurred in the container during the request processing
java.lang.NullPointerExceptionnull at java.io.Writer.write(Writer.java:126)null at java.io.PrintWriter.newLine(PrintWriter.java:254)null at java.io.PrintWriter.println(PrintWriter.java:405)null at java.io.PrintWriter.println(PrintWriter.java:516)null at org.apache.catalina.logger.LoggerBase.log(LoggerBase.java:266)null at org.apache.catalina.core.StandardWrapperValve.log(StandardWrapperValve.java:376)null at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)null at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)null at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)null at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)null at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)null at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)null at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)null at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)null at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)null at java.lang.Thread.run(Thread.java:534)null
Thanks
Rajesh

Srikanth,
Problem is that the exception is not form any PrintWriter object i had instantiated in my servlet code. Infact, the exception comes from a class of tomcat when it is trying to log some information. The basic thing is I am contacting a Geographical positioning server from servlet. The contact is fine and I get requested information back from server. But, once the control comes back to server, I get that exception. If I dont contact the geo server, I dont get any exception.
Thanks for your immediate reply.
Rajesh

INT-0115: Null Poiner Exception. This is programming error. Please contact

Hello, good day
I am fulfilling one interface between maximo eam and sap r3 but to the quere to purchaise requisition of sap to maximo marks the following mistake,
INT-0115: Null Poiner Exception. This is programming error. Please contact your System Administrator.; nested exception is:
java.lang.NullPointerException

Please contact your System Administrator
Did you?

Exception in EventDistribute occured Throw it to upper level

I am getting this error , does anybody know what is this realted to
<i><b>Exception in EventDistribute occured Throw it to upper level</b></i>

Manish,
too little information to find something out. Could you please search the trace files to find out if you have anything more by searching? You can find out the trace files at <installation drive>:\usr\sap\<SID>\<instance no>\j2ee\cluster\server0\log folder. Sort the defaultTrace.XX.trc files by modification date and open the latest one. Simulate the error once and immediately check the trace file to find any corresponding error message. Then post the same here - also mention what does this iView do - I mean - connects to SAP backend or something like that.
Regards,
Shubhadip

Exception while calling Concurrent Program

Hi All,
i have 2 oracle applications adapter in my BPEL and i am trying
1. Insert data into an interface table - GL_INTERFACE.
2. call a concurrent program GLLEZL ( journal import in general ledger) to copy data into base table.
Currently i am using SOA Suite 11g and 12.0.6 version of the Apps (EBS).
I want to know the following things -
1. Previously i was using 12.1.1 version and i was able to view the interface table from the oracle application adapter wizard where as it is not visible in 12.0.6. What could be the reason for this?
2. I could run the concurrent program in 12.1.1 but not in 12.0.6!! when am using 12.0.6 i get the following exception -
Aug 26, 2010 5:58:20 PM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log
SEVERE: JCABinding=> InterfaceToBaseTable:GLLEZLCall [ GLLEZLCall_ptt::GLLEZLCall(InputParameters,OutputParameters) ] Could not invoke op
ration 'GLLEZLCall' against the 'Oracle Applications Adapter' due to:
BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Aug 26, 2010 5:58:20 PM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log
SEVERE: JCABinding=> [default/InterfaceToBaseTable!1.1*d665523f-90ad-4a37-9996-92118d5b72ca.GLLEZLCall]:GLLEZLCall Two-way operation GLLE
LCall() failed
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.common.MediatorUtil logDetailsInError
WARNING: Payload after BaseActionHander.requestMessage :{InputParameters=oracle.xml.parser.v2.XMLElement@1854079}
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.common.MediatorUtil logDetailsInError
WARNING: Properties after BaseActionHander.requestMessage :{tracking.compositeInstanceId=30009, tracking.ecid=0000IeiNgDJAtHtawdaeMG1CTX1E
000Mk:46106783, tracking.conversationId=1282825658975, tracking.parentComponentInstanceId=mediator:693B0110B10D11DF9F602115C830574F, MESH_M
TRICS=null, tracking.parentReferenceId=mediator:693B0110B10D11DF9F602115C830574F:693D4B00B10D11DF9F602115C830574F:req, transport.http.remot
Address=*.*.*.*}
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.common.MediatorUtil logDetailsInError
WARNING: Headers after BaseActionHander.requestMessage :[]
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.serviceEngine.MediatorServiceEngine process
SEVERE: Rolling back transaction due to ORAMED-03303:[Unexpected exception in case execution]Unexpected exception in request response opera
ion "GLLEZLCall" on reference "GLLEZLCall". Possible Fix:Check whether the reference service is properly configured and running or look at
xception for analysing the reason or contact oracle support.
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.serviceEngine.MediatorServiceEngine process
SEVERE: Updating fault processing DMS metrics
Aug 26, 2010 5:58:20 PM oracle.tip.mediator.serviceEngine.MediatorServiceEngine process
SEVERE: Got an exception: oracle.fabric.common.FabricInvocationException: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GLLEZLCall' failed due to: Exception occur
d when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
oracle.tip.mediator.infra.exception.MediatorException: ORAMED-03303:[Unexpected exception in case execution]Unexpected exception in request
response operation "GLLEZLCall" on reference "GLLEZLCall". Possible Fix:Check whether the reference service is properly configured and runn
ng or look at exception for analysing the reason or contact oracle support.
at oracle.tip.mediator.service.SyncRequestResponseHandler.handleFault(SyncRequestResponseHandler.java:206)
at oracle.tip.mediator.service.SyncRequestResponseHandler.process(SyncRequestResponseHandler.java:122)
at oracle.tip.mediator.service.ActionProcessor.onMessage(ActionProcessor.java:64)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase(MessageDispatcher.java:121)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase(InitialMessageDispatcher.java:467)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:366)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:272)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch(InitialMessageDispatcher.java:138)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process(MediatorServiceEngine.java:656)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.request(MediatorServiceEngine.java:527)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
at sun.reflect.GeneratedMethodAccessor1075.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy195.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java
1155)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.j
va:767)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1119)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:873)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:553)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:202)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:166)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:384)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:444)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.fabric.common.FabricInvocationException: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GLLEZLCall' failed due to: Exception occur
d when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
at oracle.integration.platform.blocks.adapter.fw.jca.cci.EndpointInteractionException.getFabricInvocationException(EndpointInteract
onException.java:75)
at oracle.integration.platform.blocks.adapter.AdapterReference.getFabricInvocationException(AdapterReference.java:287)
at oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:193)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
at sun.reflect.GeneratedMethodAccessor1075.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy195.request(Unknown Source)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.request2Mesh(MediatorServiceEngine.java:832)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:202)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:94)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:74)
at oracle.tip.mediator.service.SyncRequestResponseHandler.process(SyncRequestResponseHandler.java:73)
... 48 more
Caused by: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GLLEZLCall' failed due to: Exception occur
d when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:427
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:510)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeSyncJcaReference(JCAInteractionInvoker.java:48
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performSynchronousInteraction(JCAEndpointInteractio
.java:445)
at oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:155)
... 66 more
Caused by: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.getJCAInteractionSpec(JCAInteractionInvoker.java:775
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:193
... 70 more
Caused by: java.lang.ClassNotFoundException: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:55)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:36)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.getJCAInteractionSpec(JCAInteractionInvoker.java:752
... 71 more
Aug 26, 2010 5:58:20 PM oracle.j2ee.ws.server.ServerMessages severeMsgServletException
SEVERE: An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GLLEZLCall' failed due to: Exception occur
d when binding was invoked.
Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInter
ctionSpec due to: oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec".
The invoked JCA adapter raised a resource exception.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Any idea about these problems???
Let me know if you need any more information.
Thanks in advance
- Roshan.

Hi,
You are passing wrong Vector class parameter in the call.
Correct call should be of below type:
submitRequest(java.lang.String p1, java.lang.String p2, java.lang.String p3, java.lang.String p4, boolean p5, java.util.Vector p6)
cpArgs should be of type java.util.Vector
Regards,
Sandeep M.

Class Not found exception in java concurrent program

Hi All,
I done java concurrent program as per steps given by oracle.I am getting class not exception when i am submitting that concurrent program.Can any body have faced this issue?
Thanks
JK

Also go through the metalink Note:250964.1
It goes through the complete process of creating a sample java conc process and implementing it.
--Shiv

Exception in Hello World Program in Hibernate

Hi All
I am trying to run my first "Hello World" hibernate program in the book "Java Persitance with Hibernate". I have written the model class and the main class.
I have also create the mapping file Message.hbm.xml and hibernate configuration file hibernate.cfg.xml through hibernate tools. Now when I am running the main class i am getting the following exception.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
Exception in thread "main" java.lang.ExceptionInInitializerError
     at com.hibernate.test.HibernateUtil.<clinit>(HibernateUtil.java:17)
     at com.hibernate.test.HelloWorld.main(HelloWorld.java:15)
Caused by: java.lang.NoClassDefFoundError: org/slf4j/impl/StaticLoggerBinder
     at org.slf4j.LoggerFactory.getSingleton(LoggerFactory.java:223)
     at org.slf4j.LoggerFactory.bind(LoggerFactory.java:120)
     at org.slf4j.LoggerFactory.performInitialization(LoggerFactory.java:111)
     at org.slf4j.LoggerFactory.getILoggerFactory(LoggerFactory.java:269)
     at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:242)
     at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:255)
     at org.hibernate.cfg.Configuration.<clinit>(Configuration.java:165)
     at com.hibernate.test.HibernateUtil.<clinit>(HibernateUtil.java:15)
     ... 1 more
Caused by: java.lang.ClassNotFoundException: org.slf4j.impl.StaticLoggerBinder
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     ... 9 moreI have added the following jars from the folder hibernate-distribution-3.5.2-Final\lib\required
commons-collections-3.1.jar
dom4j-1.6.1.jar
javassist-3.9.0.GA.jar
jta-1.1.jar
slf4j-api-1.5.8.jar
and hibernate3.jar to the classpath.
It would be great if someone could help me in resolving this problem
Thanks in advance
Fierof2

user13519911 wrote:
I have posted this question here because this is a hibernate program with is related to database connectivity. What i would like to know is what is the jar file i am missing and why is it not present in the required folders of hibernate distribution.Yeah. With that kind of unproductive attitude I suddenly lose all interest in helping. So weird.
Guess I'll do what I like: be blunt. You are allowed to think. I suggest you do so.

Runtime exception for other than programming error.

In a conversation the question arose whether it could be a case of throwing a runtime exception for anything other than a bug. The tutorial on oracle site says "These Usually Indicate programming bugs" leading to think that can be used in situations in which there is no bug.
Anyone have a practical example of a runtime exception when there is no bug?
Thanks.

937643 wrote:
Ok. But. Do you think that in these cases the use of a runtime exception could be considered a bad practice?That's actually a matter of some debate.
On the one hand, Java has defined two major kinds of exceptions since the very beginning (unchecked exceptions, which are RuntimeException, Error, and their descendants; and checked exceptions which are everything else). The intended use of those was that checked exceptions should be for things that can normally go wrong in the execution of a program, even without a bug or without a major internal JVM error, such as a failed attempt to persist something or a network connection dropping--stuff that a programmer might normally be expected to deal with; while unchecked exceptions were created for things that a programmer would not normally handle in his code (except possibly at major architectural boundaries), like buggy code or an internal JVM failure.
With the rule about having to catch or declare checked exceptions, but not unchecked ones, that makes it easy for programmers so say, "Okay, I know exactly what can go wrong here that I might be expected to handle and I can therefore choose what to do with it; there will be no surprises. But I don't have to deal with problems that are outside my normal responsibility, like somebody passing me a null when they shouldn't have." It gives a programmer a nice bit of control, and the ability to know he hasn't missed something, kind of like the type safety provided by a strongly typed language.
At least that's the theory.
In practice, most checked exceptions either just get bubbled up to the next layer (via a throws clause), or caught wrapped in a fairly generic layer-appropriate exception and rethrown. There's not a whole lot of use made of what checked exceptions provide, and there's a lot of ugly boilerplate code that doesn't do anything useful for the app but is just there to satisfy the compiler.
So, some people think that checked exceptions are useless, or mostly useless, and favor unchecked exceptions in most or all cases. I believe that's part of the philosophy of Spring, but I'm not totally sure.
The idea is that since most of the time you can't do anything about exceptions that might be thrown to you, it's wasteful and pointless to have all that code to catch and rethrow. In this viewpoint, it would be better if, for example, not providing a throws clause at all meant that you could throw any exception. Any given code can still catch specific exceptions that it knows it can handle, but we don't have to write a bunch of code notating something that we're not really doing anything about.
Personally, I used to be totally in the checked exception camp. However, all the pointless boilerplate is wearing me down. I'm still not completely convinced though, and here's why: If I'm calling a method, I'd like to at least be able to see what might go wrong, so that I can decide how to deal with it. If all exceptions were unchecked, and the throws clause were optional, a conscientious developer could still provide it, and list the unchecked exceptions his method might throw to me, and/or he could document them in the javadoc comments. But a lot of developers won't do that, or even if they start to, as their method evolves, without the compiler to enforce it, they won't keep it up to date.
So there are advantages to both approaches. I personally would to know that the information will always be available to me, but for the small percentage of the time where I actually use it (like handle one specific exception one way and some other exception differently), I'm not sure if it's worth the overhead.

Catching exception thrown by Native program

I am calling a C++ DLL from java program.
If there is any exception in the DLL, the java program exits by itself.
I want to know how I can catch the exception thrown by the native program.
Any help is appreciated.
Thanks in advance.
Sridhar

I'll assume that you wrote a JNI wrapper around the DLL. In this case, the wrapper would need to throw the exception back to the VM. The DLL won't do this.

Pls find out the exception in this simple program...

Pls tell me wots the reason of the exception in this program since im getting an exception like this..
Exception is thread "main" java.lang.NoClassDefFoundError: derived
Program is the following:-
class base {
public base() {
System.out.println("BASE CLASS DEFAULT CONSTRUCTOR");
public base(int i) {
System.out.println("inside base i");
public class derived extends base {
public static void main(String args[]) {
derived obj=new derived();
derived() {
System.out.println("Derived class constructor");
derived(int i) {
System.out.println("inside derived i");
Pls help me...

Javapedia: Classpath
How Classes are Found
Setting the class path (Windows)
Setting the class path (Solaris/Linux)
Understanding the Java ClassLoader
java -cp .;<any other directories or jars> YourClassNameYou get a NoClassDefFoundError message because the JVM (Java Virtual Machine) can't find your class. The way to remedy this is to ensure that your class is included in the classpath. The example assumes that you are in the same directory as the class you're trying to run.
javac -classpath .;<any additional jar files or directories> YourClassName.javaYou get a "cannot resolve symbol" message because the compiler can't find your class. The way to remedy this is to ensure that your class is included in the classpath. The example assumes that you are in the same directory as the class you're trying to run.

Exception /CCM/CX_MAPPING_DELETION_FAILD occurred (program: /CCM/CL_MAPPING

Similar Messages

Maybe you are looking for