Exception CX_SY_MOVE_CAST_ERROR when Process Reassignments for Key Date Results
Hi Experts,
I got an exception error when process reassignments for key date results(transaction code /BA1/FG_PR_KR_REASS) in BANK ANALYZER, did anyone get the same problem before? any solutions?
the process sequences is listed below:
1,,Set SDL Timestamp,, /BA1/B0_CLOSE_SDL
2,,Generate Positions,, /BA1/F2_PB_PR
3,,Aggregate Financial Transactions,,,, /BA1/FG_PR_FT
4,,Prepare Business Transactions for Aggregation,, /BA1/FG_PR_BT_PRE
5,,Process Reassignments for Business Transactions,, /BA1/FG_PR_RABT
6,,Aggregate Business Transactions,,/BA1/FG_PR_BT
7,,Process Reassignments for Key Date Results,, /BA1/FG_PR_KR_REASS
7.a),,Subcomponent view,,subcomponent=S_SVAC01 ,,OK
7.b),,Subcomponent view,,subcomponent=S_SVFT01 ,,Exception
I nenver changed subcomponent settings, they are all SAP delivered.
Exception CX_SY_NO_HANDLER: An exception with the type
CX_SY_MOVE_CAST_ERROR occurred, but was neither handled locally, nor
declared in a RAISING clause
Message no. /BA1/AL_X0_M_H000
Exception CX_SY_MOVE_CAST_ERROR: Source type
\CLASS-POOL=/BA1/CL_AL_FG_MD_SUB_CMP_VIEW\CLASS=LCL_SCV_FT2AGGRO is not
compatible, forthe purposes of assignment, with target type \INTE
Message no. /BA1/AL_X0_M_H000
Thanks!
Hi Abhi,
in do_prepare_output you are getting mixed entity which is combination of bol entity and value node.
you can get the bol entity from mixed node by calling a method get_model_node similarly to get value node entity get_value mode method is available check the class CL_BSP_WD_MIXED_NODE methos, you will get an idea.
Cheers,
Sumit Mittal
Similar Messages
-
Cannot change variable for key date in aggregate
Hello,
when I drag time-dependant attributes into an aggregates definition I am prompted to enter a key date or choose a variable for that. I then activate and fill that aggregate. Afterwards I deactivate it and remove the time-dependant attributes so there are no time-dependant attributes in the definition any longer. I then want to also remove the variable for the key date but I can't do so. This property is greyed out and there is no context menu for the entry "Variable for key date".
The SAP Help says this should be possible by changing the key date variable through the context menu (see http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/frameset.htm).
Has anyone faced this problem, too? I do not want to redefine my aggregate as this is not an elegant solution to the problem.
Thanks to any answers in advance.
Regards,
PhilippHey Karim,
Because you have time dependent attributes in the aggregate you need to specify key date:
check this
http://help.sap.com/saphelp_nw70/helpdata/en/44/70f4bb1ffb591ae10000000a1553f7/frameset.htm -
Date range for key date in hierarchy
Dear Friends,
Is there a work around for single key date restriction for time dependent hierarchy.Bcos i can only select one key date in teh report for my hierarchy so that it will take that hierarchy which falls in this date and display the result accordingly.
But is there a way to select the date range for key date so that more than one hierarchy can be used to display my report accrding to the time range.
Say,i have 4 hierarchies (time dependent) like v1,v2,v3,v4 and v5 for jan 08,feb 08,mar 08,apr 08 & may 08 respectively.
In my report,i want to display the result for the time interval say mar to May.
So my report should diplay the result according to the 3 different hierarchies for the time period i.e.v3,v4&v5.
How do i acheive this.
Thanks.
raguHi
I think we may do with the Char with text with replecement path.
take time char as Calmonth and set the offet value as -1 and -2 and design the report and use the hierarchies in that query.
Am not surt it willwork but better to try with this. -
How to create process chains for Master Data?
I need information on " how we can create process Chains for Master Data"
Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini -
Process chains for loading data to target is not functioning
Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
SoujanyaHi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V -
Using a range of dates for Key Date
In a HR Bi data warehouse, we have a position-to-position hierarchy, where each of the nodes are time dependent. So, it shows for each node, valid from and valid to dates, and all the employees who are reporting to that position. This hierarchy is built on the infoobject 0HRPOSITION, which is maintained in R/3 and extracted to BI.
Let us take an example: Position 1000 is valid from 1-1-2006 to 6-30-2006 Employees reporting to this position are A,B,C,D
Position 1000 is valid from 7-1-2006 to 12-31-9999 Employees reporting to this position are A,E,F,G
When a user chooses the position 1000, and date range 1-1-2006 to 12-31-2006, it show the complete list of employees as
A,B,C,D,E,F,G.
Because the Keydate can only be a single value, and it is automatically taking today's date, and pulling the nodes based on that.
I have created a hierarchy node variable on the 0HRPOSITION infoObject, and entered the value 1000, with no value for the keydate.
The system is simply showing employees, A,E,F and G. That is my problem
My requirement is this: I like to be able to give a date range, (for the hierarchy) say from 1-1-2006 to 12/31/2006 and get the complete list of Employees, which is A,B,C,D,E,F,G.
Is this possible? Can I change the way this hierarchy is defined so that I can pull the possible values for a range?Thank you Ajay.
After some thinking, I have realized that these options will not work.
We have a position-to-position hierarchy that shows who reports to who in the organization. This hierarchy is built on the Infoobject 0HRPOSITION. Each node in this hierarchy has is time-dependent. Note that, the entire hierarchy is not timedependent. Only the individual position nodes are time-dependent.
This 0HRPOSITION infoobject exists in the Heacount cube as one of the characteristics. Here is my requirement.
1. I want to show in a report, all the employees (directly or indirectly) reporting to a manager for a period of say, 1 year?
I know that I can specify a key date for the hierarchy 0HRPOSITION, then the report will show all the employees (direct and indirect) reporting to a position say 6/30/2008. I don't want this for a specific date, I want to get ALL the employees (direct and indirect) reporting to a position in a range of dates( say 1 year)
Does that make sense? How do we achieve this goal? -
I need to reset my "Rescue email"
in order to do this you have to answer security questions
herein lies my problem
its asks for my date of birth
i enter it and it is not recognised
therefore i can't reset my account information
anybody know what to do next
have contacted itunes but not received any valid help as of yetNo one here will be able to help you. We are fellow users.
You need to contact iTunes support via:
https://expresslane.apple.com
It looks like you've already done that - they can take a day or to respond these days I find.
AC -
How to increase the number of processes taken for loading data?
Hi,
While loading data from R/3 to BW, we found that the particular load is taking 2 processes to load data into Cube.
Is there anyway to increase the number to 4 ?
Thanks in advance.
Bobby.Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti. -
How to create process chain for this data flow
Hi experts,
My data flow is:
======================================
2lis_11_vahdr->Transfer rules->2lis_11_vahdr->Update rules->DSO1->Transformation->DTP->Cube1.
2lis_11_vaitm->Transfer rules->2lis_11_vaitm->Update rules->DSO1->Transformation->DTP->Cube1.
======================================
2lis_12_vchdr->Transfer rules->2lis_12_vchdr->Update rules->DSO2->Transformation->DTP->Cube1.
2lis_12_vcitm->Transfer rules->2lis_12_vcitm->Update rules->DSO2->Transformation->DTP->Cube1.
======================================
2lis_13_vdhdr->Transfer rules->2lis_13_vdhdr->Update rules->DSO3->Transformation->DTP->Cube1.
2lis_13_vditm->Transfer rules->2lis_13_vditm->Update rules->DSO3->Transformation->DTP->Cube1.
======================================
Here for each datasource info package brings data upto dso and then from dso dtp fetches the data.
For deltas i want to keep this data flow in process chain.
Anyone please guide me how to keep this in a process chain.
Full points will be assigned.
Regards,
Bhadri m.
Edited by: Bhadri M on Sep 2, 2008 7:20 PM
Edited by: Bhadri M on Sep 2, 2008 7:21 PMHello,
Sure it is possible to maintain that dataflow.
Start here:
This is a very good document about process chains:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
Let me know if you have any doubts.
Regards,
Jorge Diogo -
hi all, maybe it's a stupid questions but when I open Analysis services processing task editor in ssis to process dimension, I just can not find the ProcessAdd in the Process Options List?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --thanks sqlsaga, I did check but no luck ...
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
This is what you should do for ProcessAdd option on a dimension
http://www.mssqltips.com/sqlservertip/2997/using-processadd-to-add-rows-to-a-dimension-in-sql-server-analysis-services-ssas/
http://www.purplefrogsystems.com/blog/2013/09/dimension-processadd-in-ssas/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Warning when the trip for the date already exist
hi friends
In the travel. When the trip is applied for a particular date when i again try to apply the trip for the same date it shows only waring but actually it should be a error. I want to make the warning into error. How to make that which BADI is called. Since am applying the trip from my portal. I want to display the warning into error to portal. Which BADI or Function Module is evolved .
Regards
vijayHello Vijay,
As long as there is no expense report linked to a travel request it is
possible to create a further request that overlaps with the first one.
This system behaviour is generally correct as during the planning
phase of a trip it should be possible to create overlapping trips.
Thus you only get a warning message that there are already trip dates
and not an error (as soon as an expense report has been created an error
message occurs if you try to create a new travel request that overlaps
the expense report).
This is the standard design for overlapping checks concerning travel
requests.
In TRVPA you can set the warning message into an error message.
Regards,
Raynard -
Dear All,
I have created a customer exit variable on key date of a query.
With this input variable i am first asking user to input one particular date say he enters 31.12.2010 then i am trying to add 1 more day to it and making it 01.01.2011.
I have put a break point in the code but it does not stop the processing there.. report executes directly taking the first user input.
I want to add 1 more day to the user entered date and this modifiied date should be the input date for key date field.
Below is my code.
WHEN 'ZCAL_DAY_EXT'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCAL_DAY_EXT'.
CLEAR L_S_RANGE.
ENDLOOP.
DATA: v_temp like sy-datum.
v_temp = loc_var_range-low.
v_temp = v_temp + 1.
L_S_RANGE-LOW = v_temp.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
Do let me know where am i going wrong? Or is it we cannot use customer exit with Key date.
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Aug 2, 2011 7:16 AMHi Anup,
Basically I_STEP = 1 is used for populating the default value which will be shown on selection screen and I_STEP = 2 is the step in which you does the processing on variable values which are entered on selection screen.
I am surprised that your internal table is empty, actually it is supposed to contain all the variable values which are entered in I_STEP = 1.
Can you try to add some more variables along with the current variable and check whether their value is coming in the internal table or not?
Finally what you can try is get the user input date in one variable and then create another customer exit variable in which you will calculate the new value and use this variable in Key date, the problem might be that we are trying to modify the same variable, actually it should not be the problem but I have no clue what is happening and you can just try this alternative.
Regards,
Durgesh. -
Hi All,
I am using time dependent master data, i want to count number of employees on particular key date for diffferent Orgunits. So i created variable in the query properties for dynamic date selection .I also have other variable - Calendar month.
If the user enters particular Calendar Day (21.03.2008), then the report should show the total number of employees for that particular day.
If the user chooses Cal Year/month then the report should show the total number of employees for that time frame (12.2007-12.2008).
When i enter Cal Year/month and execute the system not allowing to execute the report. It says Calender Day is mandatory.
How can i bypass the calenderday when i choose calyear/month.
Variable for Key date :
Char - Calender Day
Mandatory
Ready for Input
Regards
A.VasisterHi,
For this work you have to create another 2 variable.
1. Make your both user entry variables as optional.
2. Create another 2 variables processing type as user exit.
3. In the CMOD program, identify which variable contains data.
- If the user entered month, then in the user exit of Calender day's from date should be
first day of the month parameter and to date should be the last date of the month parameter.
- If the user entered date, then pass corresponding month&year value of the date to calmonth variable.
Let me know the position.
Vivek -
Bex query-KEY date for time dependent objects
Hi
I have one infoobject called 0customer that has one time dependent attribute .called status. I would know how the system works in the following senario for the a given key date(which in bex properties).
question 1)
customer todate fromdate status
1 20071231 20070101 Y
1 20081231 20080101 N
1 20091231 20081101 X
can the data in the infoobject be overlapped? is the 3 rd record is valid in the above example - as months(11&12of2008) overlapping with second record? ? pls advise
question 2)
customer todate fromdate status
1 20071231 20070101 Y
1 20081231 20080101 N
1 20091231 20090101 X
If the keydate is 20080201 which record will it return?would it return the record that has status 'N'?
what does the keydate is compared against? is it with from date or todate or between fromdate and todate? does the query return only one customer record for a given customer when it runs in the query?
Please advise.
Thanks
Vennela1) Normally you cannot activate the data with this constellation. If you have inconsistent master data you can repair with transaction RSRV.
2) The system returns N for key data 20080201.
Best regards
Dirk
Edited by: Dirk Herzog on Nov 19, 2008 1:16 PM -
Compare time depednt master data for two key dates in a report?
Hello all,
We have a requirement where we want to see the difference in master data at particular key dates (time dependent master data).
Like if employee has State = OH till yesterday (12/01/2008) and today it is changed to State =KY (12/02/2008 to 12/31/999) loaded in BW which is time dependent.
So basically if you run the query for Key date 12/01or before you will see OH as state and if you run query for key date 12/02 or further you will see KY.
We want to create a report where we want to list employees and compare in two columns basically the previous value and the current value. So input would be two key date variables and the report would look like
Employee Key date 1(state) Key date 2 (state)
Employee1 OH KY
Has anyone done this before, can someone help me doing this?
Thanks,Hi ,
For this scenario , Can you please create variabale ( From value -- to value ) in the key figure date .And by using the time period in the varaible u can get the employees for both the states ...
Hope this helps out
thanks
PT
Maybe you are looking for
-
** File to IDoc scenario - IDoc not created in target system
Hi friends, We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target s
-
Can you help to open adobe flash cs6
Can you help to open adobe flash cs6
-
The Installation of iTunes 10.4 always fails on my MBP, OSX 10.6.8
i am unable to install iTunes 10.4 on my MacBook Pro, OSX 10.6.8. The installation always stops with an error message.
-
hi friends, coming monday, i am supposed to give a seminar on abap reports, which should include all kinds of reports, it would be attended by both functional guys and also abap gurus, so i want to touch all the topics inside reports , can some one
-
Where is the checkout in itunes store
trying to purchase music in my wish List and it says thee is an error and to review my checkout - don't know where that is??