Exception from InfoPackage.Schedule BAPI

Hi all,
I'm working on a BW integration project, using the Staging BAPIs for the BIW from the .NET Connector. I have been able to create the InfoObjects, InfoCubes, etc... however I am running into a problem I just can't get around. I am trying to schedule an InfoPackage to upload data in a csv file on my workstation. However, when I call the Schedule BAPI (BAPI_IPAK_START), I get an exception that doesn't make much sense to me: "An upload from the client workstation in the background is not possible". I'm not using a background thread, so I'm a little confused where this comes from. If I schedule the package from the BW Administrator, it schedules and uploads with no problems. Does anyone have any idea where I may be going wrong here?
Thanks,
Steve

I am also having the same problem. Can anyone help?
The only difference is so far, I am only testing it from SAP GUI ( i.e calling BAPI functions from ABAP code)
Message was edited by: Saurabh Gupta

Similar Messages

No DataTarget found from InfoPackage Scheduler

Hi All,
I am trying to load flat file data into Info Cube from InfoPackage Scheduler in Production System. When i look the Data Target tab , it doesn't have the Data Target ( Info Cube ) eventhough my update rules are active from the infosource to Infocube.
I will appreciate for ur help and letme know how can i find my InfoCube under data target tab at InfoPackage Scheduler.
Points will be awarded.
Thanks,
Abhi

Hi Abhi,
Check this,
Go to Cube --> right click --> show Data Flow --> click the technical names On and see whether the flow is correct or not..
Create a new InfoPackage and try once again..
Hope this helps,
Thanks,
Sudhakar

Stop infopackage from background scheduling

Hi experts,
How to stop a delta infopackage from Background scheduling in info package options. I want to stop background scheduling
and keep this infopackage in a process chain.I clicked on Start Data load immediately and saved. But when i again opened the infopackage by default it is on Background scheduling and is asking for cancel job after X runs.How to avoid this ?
Bhadri M.

You can kill the Job through SM37. IP if directly scheduled, the name would be BI_BTCH*. If you go tour Schedule Tab for your infopackage you can find the name of the Job.
In SM37, just select the job and delete it.
Please don't delete the job if its already Active. Delete it if its in the Released or Scheduled status.
Then you can simply include your IP in you Process Chain and schedule the Process Chain to run daily.
Regards
Anujit Ghosh

Add authorization check in Infopackage Scheduler for option 6-ABAP Routine

We want to add an authorization check in routine rssm_routines_maintain. This is in the Infopackage scheduler in the Data Selection tab under the column Type after selecting type=6(ABAP Routine). This is a core modification. We have checked with our Security team with traces and found nothing available to help us.
Two questions:
1) Is there any other way we can control who can create/change ABAP code by this method ?
2) Does anyone see this causing problems if we were to make a change to the routine to add code to do an authorization check.
Your help would be appreciated.
Robert Begin,
450-677-9411 or
514-924-4311
or email at [email protected]

Hi Chandran, we need to restrict a certain group of BW Developers from writing code in the abap routine (option 6 ) in the Infopackage of the Data Selection Tab in column Type.
The concern is that if having access to write abap code, a person can practically do as heéshe pleases with ABAP code and it is a concern.
Do you have any solution/suggestions to lock this down?
Much appreciated,
Regards,
Robert.

Execute Infopackage Through BAPI Using Excel Macro (BAPI_IPAK_START)

Hi everyone,
I have a problem when execute infopackage through BAPI using excel macro. I have create a button in macro. When this button is clicked, BAPI for trigger InfoPackage will executed (BAPI_IPAK_START) and this button will disabled.
After this process completely done (traffic indicator for the request is green in update rules), the button will enabled again.
Here the subroutine or pseudocode that i will write :
Private Sub ClickButton()
Begin
1. ThisButton.Activated = False --> Disabled Button
2. Call BAPI/custom Function Module to execute InfoPackage (BAPI_IPAK_START)
4. ThisButton.Activated = True --> Enabled Button
End
The problem is i need some statement like this between statement no 2 and statement no 4
Statement That I Want :
3. Wait Until BAPI Execute Completely
So user can click this button again only after the process is finished completely. I don't know how to do this in macro (in ABAP i know i can use "WAIT ... SECOND"), others said this can be done using event in schedule option at infopackage. Anyone,please help me.
Thank you.
Regards,
Satria B

Enter that req number in RSRQ and monitor the load
or right click on the DS - manage - you will req in yellow status which is in progress and you can click on the ...takes you monitor screen
Edited by: Srinivas on Jul 6, 2010 7:51 AM

Transaction code for infopackage scheduling

Hi,
Does any know what the standard transaction code is for infopackage scheduling (other than RSA1)? Is there any other option to by pass the RSA1 code and go to the infopackage directly to upload an external file to the infocube? Any input will be appreciated. Thanks.

Hi,
RSA1 is a standard TCODE for SAP-BI or BW.
As far as my guesses, there was no standard transaction to run a Infopackage....
Instead of using tht still if u need to scedule a package,
1) If ur Infopackage is included in process chains, then u can goto RSPC to the same chain where the infopackage was included and there on the loading step if u rightclick-->display variant.....then it'll goto scheduler window..there u can start...
2) If u have run the same package before anytime and u remember the date, u can goto RSMO and filter according to IP selections and u'll get all the packages run on tht day...
If we execute with tht selection u'll get the monitor of the load..ther from the header tab...in the IP selction u can schedule the same without using RSA1..
But RSA1 is the easy way to trace via data source..
rgds,
Edited by: Krishna Rao on Mar 26, 2009 2:48 AM
Edited by: Krishna Rao on Mar 26, 2009 2:48 AM

Exception from BAPI_PTMGRATTABS_MNGCREATION

Hi,
We are using BAPI - BAPI_PTMGRATTABS_MNGCREATION it is working fine but at times it is giving exception from Class - CL_HRPA_INFOTYPE_FACTORY and method - SET_CONTEXT ( cx_hrpa_violated_precondition) and giving dump.. When it raise exception variable a_context value is having value and raising exception.. Please advice what can be the issue...
METHOD set_context.
IF a_context IS INITIAL.
    CASE context.
      WHEN context_default OR
           context_legacy.
        a_context = context.
      WHEN OTHERS.
        RAISE EXCEPTION TYPE cx_hrpa_invalid_parameter
          EXPORTING
            parameter = 'CONTEXT'.
    ENDCASE.
ELSE.
*   context must never be set twice
    RAISE EXCEPTION TYPE cx_hrpa_violated_precondition.
ENDIF.
Regards,
Rajesh

Hi, Issue is resolved. I have call the function module with new task..
CALL FUNCTION '<..FM..>' STARTING NEW TASK 'TXT'
Thanks
Rajesh

Infopackage scheduler

hi sap gurus,
In the INFOPACKAGE ,scheduler (maintain infopackage Screen ) --->in the SCHEDULE TAB -
> i changed the option "START LOAD IMMIDIATELY" TO "START LOAD LATER IN BACKGROUND" by mistake .I am not able to revert back the option.
can any body tell me how to change the option back to START LOAD IMMIDIATELY.please

Copy the infopackage ID which starts with ZPAK_*. Then go to SE16, give the table name as RSSDBATCH -> give this infopackage id as the selection for log.object. Delete the corresponding entry from this table and the option START LOAD IMMEDIATELY will appear in the infopackage.
Please assign pts if helpful.

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception -Interface not registered(Exception from HRESULT:0X....

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message -"Interface not registered(Exception from HRESULT:0X...."
Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
swapnanil sengupta

TechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
swapnanil sengupta

Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)

Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
Hi!
We would like to hold the account balance data from EMPTOR to SAP and have the following error:
Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
We use SAP ERP 2005 on Windows 64 Bit.
Can some one help with the problem?
Thank you very much!
regards
Thom

You can download the latest avaiable kernel or just the librrfc component from http://service.sap.com/swdc. They maybe an issue with this DLL. Just download the latest one and copy into \usr\sap\<SID>\SYS\exe\run directory. Be sure to save the previous DLL.
Thanks
Adil

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
Kris

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))

I've Main Report + 5 sub report. All of this in a 1 file named _rptBorang.rpt.
This _rptBorang.rpt consists of
1. Main Report
2. _spupimSPMBorang.rpt
3. _spupimSTPMBorang.rpt
4. _spupimSijilDiploma.rpt
5. _spupimKoQ.rpt
6. _spupimPilihanProg.rpt
When I preview the report, the Enter values dialog box ask 7 parameters. It's
1. idx
2. tbl_MST_Pemohon_idx
3. tbl_MST_Pemohon_idx(_spupimSPMBorang.rpt)
4. tbl_MST_Pemohon_idx(_spupimSTPMBorang.rpt)
5. tbl_MST_Pemohon_idx(_spupimSijilDiploma.rpt)
6. tbl_MST_Pemohon_idx(_spupimKoQ.rpt)
7. tbl_MST_Pemohon_idx(_spupimPilihanProg.rpt)
My ASP.NET code as following,
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="_cetakBorang.aspx.vb" Inherits="_cetakBorang" title="SPUPIM" %>
<%@ Register assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web" tagprefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head id="Head1" runat="server">
    <title>Untitled Page</title>
</head>
<body>
    <form id="form1n" runat="server">
    <div align="center">
        <asp:Label ID="lblMsg" runat="server" ForeColor="Red"></asp:Label>
        <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
            AutoDataBind="true" />
    </div>
    </form>
</body>
</html>
Imports System.configuration
Imports System.Data.SqlClient
Imports System.Web.Security
Imports CrystalDecisions.Shared
Imports CrystalDecisions.CrystalReports.Engine
Partial Class _cetakBorang
    Inherits System.Web.UI.Page
    Private Const PARAMETER_FIELD_NAME1 As String = "idx"
    Private Const PARAMETER_FIELD_NAME2 As String = "tbl_MST_Pemohon_idx"
    Private Const PARAMETER_FIELD_NAME3 As String = "tbl_MST_Pemohon_idx(_spupimSPMBorang.rpt)"
    Private Const PARAMETER_FIELD_NAME4 As String = "tbl_MST_Pemohon_idx(_spupimSTPMBorang.rpt)"
    Private Const PARAMETER_FIELD_NAME5 As String = "tbl_MST_Pemohon_idx(_spupimSijilDiploma.rpt)"
    Private Const PARAMETER_FIELD_NAME6 As String = "tbl_MST_Pemohon_idx(_spupimKoQ.rpt)"
    Private Const PARAMETER_FIELD_NAME7 As String = "tbl_MST_Pemohon_idx(_spupimPilihanProg.rpt)"
    Dim myReport As New ReportDocument
    'rpt connection
    Public rptSvrNme As String = ConfigurationManager.AppSettings("rptSvrNme").ToString()
    Public rptUsr As String = ConfigurationManager.AppSettings("rptUsr").ToString()
    Public rptPwd As String = ConfigurationManager.AppSettings("rptPwd").ToString()
    Public rptDB As String = ConfigurationManager.AppSettings("rptDB").ToString()
    Private Sub SetCurrentValuesForParameterField(ByVal reportDocument As ReportDocument, ByVal arrayList As ArrayList, ByVal paramFieldName As String)
        Dim currentParameterValues As New ParameterValues()
        For Each submittedValue As Object In arrayList
            Dim parameterDiscreteValue As New ParameterDiscreteValue()
            parameterDiscreteValue.Value = submittedValue.ToString()
            currentParameterValues.Add(parameterDiscreteValue)
        Next
        Dim parameterFieldDefinitions As ParameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields
        Dim parameterFieldDefinition As ParameterFieldDefinition = parameterFieldDefinitions(paramFieldName)
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues)
    End Sub
    Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
        If Not IsPostBack Then
            publishReport(Convert.ToInt32(Session("applicantIdx")), Convert.ToInt32(Session("applicantIdx")))
        End If
    End Sub
    Private Sub publishReport(ByVal idx As Integer, ByVal tbl_MST_Pemohon_idx As Integer)
        Try
            Dim reportPath As String = String.Empty
            reportPath = Server.MapPath("_rptBorang.rpt")
            myReport.Load(reportPath)
            myReport.SetDatabaseLogon(rptUsr, rptPwd, rptSvrNme, rptDB)
            Dim arrayList1 As New ArrayList()
            arrayList1.Add(idx)
            SetCurrentValuesForParameterField(myReport, arrayList1, PARAMETER_FIELD_NAME1)
            Dim arrayList2 As New ArrayList()
            arrayList2.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList2, PARAMETER_FIELD_NAME2)
            Dim arrayList3 As New ArrayList()
            arrayList3.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList3, PARAMETER_FIELD_NAME3)
            Dim arrayList4 As New ArrayList()
            arrayList4.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList4, PARAMETER_FIELD_NAME4)
            Dim arrayList5 As New ArrayList()
            arrayList5.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList5, PARAMETER_FIELD_NAME5)
            Dim arrayList6 As New ArrayList()
            arrayList6.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList6, PARAMETER_FIELD_NAME6)
            Dim arrayList7 As New ArrayList()
            arrayList7.Add(tbl_MST_Pemohon_idx)
            SetCurrentValuesForParameterField(myReport, arrayList7, PARAMETER_FIELD_NAME7)
            Dim parameterFields As ParameterFields = CrystalReportViewer1.ParameterFieldInfo
            CrystalReportViewer1.ReportSource = myReport
        Catch ex As Exception
            lblMsg.Text = ex.Message
        End Try
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        myReport.Close()
    End Sub
End Class
The result was, my ASP.NET return error --- > Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I'm stuck
Really need help
Edited by: WKM1925 on Feb 22, 2012 11:49 AM

First off, it would really be nice to have the version of CR you are using. Then
1) does this report work the CR designer?
2) What CR SDK are you using?
3) If .NET, what version?
4) Web or Win app?
5) What OS?
Then, please re-read your post and see if it actually makes any sense. To me, it's just gibberish...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How can I pass an exception from one thread to another thread

If I create a new class, that will extends the class Thread, the methode run() can not be use with the statement Throws Exeption .
The question now: Is there any possibility to pass an exception from one thread to another thread?
Thx.

It really depends on what you want to do with your exception. Is there some sort of global handler that will process the exceptions in some meaningful way? Unless you have that, there's not much point in throwing an exception in a thread, unless you simply want the stack trace generated.
Presuming that you have a global handler that can catch exceptions, nest your Exception subclass inside a RuntimeException:
public class NestedRuntimeException extends RuntimeException
    private final m_nestedException;
    public NestedRuntimeException(final Exception originalException)
        super("An exception occurred with message: " + originalException.getMessage());
        m_nestedException;
    public Exception getNestedException()
        return m_nestedException;
}Your global handler can catch the NestedRuntimeException or be supplied it to process by the thread group.

Exception from InfoPackage.Schedule BAPI

Similar Messages

Maybe you are looking for