Exceptions not displayed using Web Application Designer

Hi there,
I've got a query including a simple exception. If I execute these query out of the query designer (in the web) or in the BEx Analyzer the exception is displeyd as defined. (red, green, yellow...)
Do I use these query as DataProvider in a Web Template (Analysis Item -> Exceptions displayer as color) the exceptions are not shown. Does anybody have an idea?
Thanks a lot in advance
Mark

If you need to use Exception in Web, you will have to open the query in the Web Analyzer and create an exception in the Web Analyzer in the Settings.
Check it out.
Regards,
Vikram

Similar Messages

To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

What GUI to use web application designer in BI 7.0 without support package

I use BI in my ECC 6.0 system.
I use tried both GUI 7.1 and GUI 6.40 to logon web application designer.
But system display the message please logon to a Netweaver BI 7.x system. System A11 does not have a mimumium version required 7007.
My system seems to be 7000, so what GUI is suitable to use for WAD?
Thanks
Giang

Hi,
It could be problem with either Support package which you are using for BI or Front end patch which you need to install for GUI.
please check with minimal installations and let me know with current support package and FEP you are using.
Regards
Suresh

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

BW Application Error while using Web Application Designer Functionality?

Hi,
An error came while using Web Aplication Designer functionality.
Can anyone please help me to resolve this issue.
X person Developed a web template, but when Y person attempted to broadcast the associated query result, an error message returned indicating access was denied: part of error message Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI.
The same X person developed a web template, but when he attempted to broadcast the associated query result, an error message was returned indicating access was denied.
From these test results it appears as though the errors encountered are authorization related. It is a requirement that web templates developed by X to be broadcasted.
I need to understand what permissions the X person requires in order for this to work so that his access can be changed.
Waiting for response.
Thanks & Regards.

The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
Hannah Fraser

Can not open or save web template using web application designer

as the subject .
when i create a template , everything is ok .but when i want to save the template i get two errors
the fist one:
type: stop
message class :rsbolap
message number: 017
description: Java communication error: an unknown error occured during portal communication .
the second one:
type: stop
message class :rsbolap
message number: 017
description: Java communication error: error when opening rfc connection.
then i click them to get the detail ,and get the same content:
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
SAP Note 888687 provides detailed instructions on analyzing communication and log-on problems.
So i check the note 888687 ,and do as it .but it does not get work.
we change the following locations to the "ALL" severity to receive more exact information:
com.sap.ip.bi.webapplications
com.sap.portal.connectors.BW
com.sap.portal.ivs.semantic.systemLandscape
com.sap.portal.ivs.systemConnectionTests
com.sap.security.api.saml
com.sap.security.core.server.jaas
com.sap.security.core.server.saml
com.sap.security.core.session
com.sap.security.core.ticket
com.sap.security.core.umap
com.sap.security.core.util
by the way we install the bi7.0 and portal7.0 in the same machine and share the same the instance.
what should i do ?

Hi I've got the same problem. When trying to use the Bex Report Designer I get this error message: "Java communication error: RFC destination not_configured does not exist". Error when loading query metadata. Check query and portal settings.
Can anybody help me to solve this problem?
Thanks in advance!

Variable values not passing with Web Application Designer

We are on SP 11
I have defined variables in the planning modeler (no personalization) that should be used when executing a copy function. The idea is to have ready input capability. For example, the variable VERSION is defined - when the planning function is executed, the user should have the ability to select a version value. I have defined TWO button groups to enable the user this feature, however the values will not override the default variable value defined in the planning modeler
BUTTON GROUP #1 - this is a copy function button with Display Varable Screen option ON. When I press the button, the variable entry WEB Page Dialog pops up (with the default value). If I input a differenct value, we get the error the the value characteristic is not included in the selection. If we use the drop down available on the dialog box to select available values, we get what's on the Web Template (it seems the drop down option is not working)
BUTTON GROUP #2. - This is a VARIABLE BUTTON using the Open Variable Dialog command (the expectation was to override the default value) When we use the drop down option on the Web Page Dialog, we have the ability to select the valuse available, however the value does not override the default value defined on the planning modeler.
Any suggestions are appreciated.
Regards,
Andrew Ramirez

Hi Andrew
I realise your posting is now 6 months old.
We are also on SPS11 and have a similar problem.
Did you manage to solve this problem>
Thanks
Ian

How to combine two queries using Web application Designer

Hello experts...
This should be a simple request.
I have two existing queries that I simply want to display on the same template. What is the best way to do this?
To add more complexity to it, if there is a result value that I want to pull from each of them, how can this be done so that I can add the results of the two into one total?
Any help that you can provide is greatly appreciated. Thanks

Hi,
Displaying the existing queries on the same template is very simple... Drag and drop to web items... for ex we will drag and drop two analysis web item...
Create 2 data providers and assign it to the web items... each dataprovider is in turn assigned to two existing queries...
I am not sure about the result value to be pulled from each of them...
Regards,
Kishore

Could not open WAD (web application designer) in BW 3.5!

Hi,
i am unable to publish my query in web.
when i click the option 'publish query in web' i cud not open that query.
it is throwing the following error!
The termination occurred in system J2E with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
can u guide me what could be the problem?
Thanks,
Ravi

looks like you have installed, BW frontend addon for WAS7.0
Regards
Raja

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Bex Web Application Designer 3.5

Hello, I am having trouble publishing a web template using Web Application Designer 3.5. Our BW version is 7.0. The underlying query in the Web App. is still 3.5.   After editing it..I did a "save" and "Publish in Role".   When I look at the report on the portal, it shows up as garbage.   Any suggestions on how to fix this problem?
Thanks.

Dear Sam,
Theer are several problems with WAD 3.x.
Please, review these notes below:
note 1390941 -   Incomprehensible characters when executing 3.X Web template
          To remove this entry you can't use the WAD. Please logon to the BW
          backend system and execute the report "RS_TEMPLATE_MAINTAIN" (via
          transaction SE38). Open the template and manually remove the mentioned
          tag.
note 1391689 -   WAD 3.x is not supported in MS Windows 7
This should solve the issue.
B.R.
Edward John

Web application Designer - RFC Exception

Hy guru, i have a serious problem: when open or execute a web templat on web application designer 7.0 i receive a error type RFC Exception.
Could you hlep me? Thank's a lot.
This is the content of bex_trace file:
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.GetHistory(BExObjectType pObjType, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
     at com.sap.bi.et.wad.man.WADTemplateController.GetHistoryForDisplay()
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.renderHistory()
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.Refresh()
     at com.sap.bi.et.wad.man.WADfrmMainWindow.RefreshInitialTemplateList()
     at com.sap.bi.et.wad.man.WADTemplateController.OnTemplateOpened(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.TemplateOpenedEventHandler.Invoke(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.AddTemplateOrLibrary(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.RegisterTemplateOrLibrary(IWebTemplate)
     at com.sap.bi.et.wad.man.WADTemplateController.LoadTemplate(EnumLoadMode, String, String, Boolean, String, Boolean, Boolean)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.Menu_OpenSelectOH(BExOpenHistoryEventArgs)
     at com.sap.bi.et.common.BExOH.BExOpenHistory.RaiseSelectOpenEntry(dtaBExOHRow)
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.StartTemplate(dtaBExOHRow)
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.lblLinkName_LinkClicked(Object, EventArgs)
     at System.Windows.Forms.Control.OnClick(EventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at System.Windows.Forms.Label.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
END com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList ##########
--> com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
-EXCEPTION-START- : DEBUG ### JSP-Conversion: ---
Exception Message: RFC_ERROR_SYSTEM_FAILURE
Exception    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.Rfc.RfcClient.RfcInvoke(SAPClient proxy, String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at com.sap.bi.et.Communication.RSWAD.BExGeneratedRSWAD.RSWAD_WEBPUB_CALL_SERVICE(String I_ACTION, String I_CONTEXTDESCRIPTION, String I_CONTEXTFRAGMENT, String I_NODEFRAGMENT, String I_TEMPLATE, String I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
   at com.sap.bi.et.Communication.RSWADrfc.RSWAD_WEBPUB_CALL_SERVICE(String& I_ACTION, String& I_CONTEXTDESCRIPTION, String& I_CONTEXTFRAGMENT, String& I_NODEFRAGMENT, String& I_TEMPLATE, String& I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
   at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate iTemplate)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Debug.Exception(String, Exception)
     at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate)
     at com.sap.bi.et.wad.man.WADTemplateManipulator.ValidateTemplate(WebTemplate)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmValidateOnTheServer_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.NotifyItem(BarItem)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.HidePopup(PopupCloseType)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.ProcessItemClick(BarItem)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message&)
     at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message&)
     at Syncfusion.Windows.Forms.Grid.GridControlBase.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
: DEBUG ### False - RSWAD_WEBPUB_CALL_SERVICE:V:Validate on Server returned e_subrc=99
END com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
--> com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject ##########
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----

Andrea,
Try using ST22 to see if it gives you a detailed error message. If it is listed it will tell you what it is missing.
Cheers,
Rusty

Web Application Designer uses wrong server name

Hello,
I am using BI under NW04s.
When I execute a web template in Web Application Designer it opens up the url with the server name without it's FQDN name and than I get: "URL used, <URL>, is invalid; distributed session management (DSM) cannot function. See SAP Notes 596698 and 654326.
I've looked at these notes but I don't see how it can solve my problem.
I've already followed the suggestions in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=279031">this</a> thread including checking RZ10 and RSPOR_T_PORTAL table.
Any other ideas...?
Roy

Hi,
try maintaining parameter icm/host_name_full in SMCIM (goto/parameters/change).
hope this helps...
Olivier.

Use Map In Web Application Designer

Hi gurus:
when I create map in Web application designer ,it shows the error:
Messages:
Internal error communicating with the IGS (maps)
Map could not be Created
But the map can be shown in Analyser,please help me!
thanks

Hi,
please tell more about your scenario.
Are you using dynamic attributes?
Are all layers visible?
Did you check the query that you are using as Dataprovider?
Is there only one geocharacteristic in the row?
Which infoobjects are you using and which shapefiles?
Best regards
Andreas

Web Application designer display authorization

Hi,
How can I restrict web application designer authorization to just display?
Thanks
Unni

Hi Unni,
I know that it is possible to insert an authority check for the starting activity of the Web Appl.Designer (just to delete the comment character from the first row of the RSAH_TOOL_AUTHTY_CHECK function module, as explained in the OSS Note 605417), but I don't know if the type of restriction you need is available (design only on the Web AD) on the system...
Hope this helps.
Bye,
Roberto

Exceptions not displayed using Web Application Designer

Similar Messages

Maybe you are looking for