Exch2k13 - OWA Virtual Directory - this option ('AnonymousFeaturesEnabled') is a security flow??

This can be considered as security flaw??
I think this description from MS Website is not enought clear and I realized that I have it as true on my server since its the 'default'.
"The AnonymousFeaturesEnabled parameter specifies whether you want to allow Outlook Web App users that are logged on anonymously to access specific features. For example, if this value is set to $true, users logged on using anonymous authentication
can view and change meeting content. This parameter is set to $true by default."
http://technet.microsoft.com/en-us/library/bb123515(v=exchg.150).aspx

Hi,
Agree with Ed. I don't think it exists security risk. The AnonymousFeaturesEnabled parameter is enabled by default, so the OWA virtual directory is visible and accessible only to those authenticated users.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

OWA will not display Options Display All Options

We upgraded Exchange 2010 to SP3 the other day.
OWA Users are not able to select OPTIONS > Display All options.
The browser just reloads and displays no additional options.
Thi shas been tested with Chrome, IE , Mac, Win 7 and Win 8.
All with the same outcome!
Any ideas would be greatly appreciated?
Many thanks in advance

Hi,
Have you tried to recreate the OWA virtual directory?
If you haven't, please try to recreate the OWA virtual directory to check result.
If the issue persists, please check the application log to see if there is any related error message.
Please check if Outlook Web App is running in the Light Version.
Besides, please check the setup log and make sure you upgrade to SP3 successfully.
Best regards,
Belinda Ma
TechNet Community Support

Where Is The Virtual Private Database Option

In apex 3.2, I could find the Virtual Private Database option in
Shared Components/Security
I am now using Apex 4.2 and I cannot find this option under
Shared Components/Security or anywhere else.
Where has it gone ?
Gus

Hi,
It is in same place, but renamed to Database Session
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldr_attr.htm#sthref738
Regards,
Jari

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

After completing a credit card sale on virtual merchant the option to print does not drop down it did before installing this latest firefox on my new computer

after completing a credit card sale on virtual merchant the option to print does not drop down as it did before i installed firefox on my new computer . the people at virtual merchant said it might be a pop-up prevention by firefox ...could this be true?

Can you check this issue on Firefox 9?
* getfirefox.com

IIS refuses to serve one specific file through this one specific virtual directory

Other javascript files with the same extension in the same folder work fine. Other virtual directories with the same file work fine.
Any help? Detailed error message is at the bottom.
Problem Details:
Only this combination of virtual directory and file fails http://localhost/jslib/vin.js
Accessing other javascript files in the same location works. i.e. http://localhost/jslib/xvin.js returns fine.
Accessing the same javascript file in the same file location but using a different virtual directory works. i.e. http://localhost/jslibtest/vin.js returns fine.
I checked the security of the file and the folder and gave "Everyone" and the anonymous authentication account set up for the site read rights.
Changing the name of the file (and nothing else) works.
Running Windows Server 2012 R2 Datacenter
Web site application pool is running as "LocalSystem", Classic pipeline, .NET v4.0
Things I've tried:
Removing and re-creating the virtual directory with default settings (through IIS Manager)
IISReset
Setting the handler mappings for the virtual directory to "revert to parent" (file works fine when served from the root). Yes, the static file handler is defined.
Setting the MIME types of the virtual directory to "revert to parent" (file works fine when served from the root). Yes, .js is listed as a MIME type application/javascript/
Deleting the file and re-creating it from scratch
Creating a blank file with the same name
Reviewed the web.config file for the site: no mention of either the file or the virtual directory
Trying to access the file using http://localhost/jslib/vin.js reports:
HTTP Error 404.4 - Not Found
The resource you are looking for does not have a handler associated with it.
Detailed Error Information:
Module IIS Web Core
Notification MapRequestHandler
Handler Not yet determined
Error Code 0x80070002
Requested URL http://localhost:80/JSLib/VIN.js
Physical Path F:\VINWebData\wwwroot\JSLib\VIN.js
Logon Method Anonymous
Logon User Anonymous

I would recommend asking them in IIS forum: http://forums.iis.net/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I can't open a certain website, it says "Directory Listing Denied This Virtual Directory does not allow contents to be listed." how can i solve my problem, please help me guys...

"Directory Listing Denied
This Virtual Directory does not allow contents to be listed."

URL of that website?

Logout from OWA after clicking on Option

I'm running into an issue with my current users that I can't seem to solve. When user click on the options menu on the top right menu, they get automatically logged off. I tried looking online for solutions, but I haven't been to successful.

Hi,
How many users are affected by this?
Try to let the user logon OWA with a different web browser, or on a different computer, does this issue persist? This step helps determine whether it's a browser or client related.
I also found some similar issues in our forums. Such as this one below:
https://social.technet.microsoft.com/Forums/exchange/en-US/514da444-b502-4812-8fb7-0ffdc8114074/logout-from-owa-after-click-option?forum=exchange2010
Try some suggestions mentioned in the thread, like "check the authentication settings for OWA and ECP in IIS", or "reset the ecp virtual directory". Check if they are helpful.
By the way, in the current forum we mainly discuss questions and feedbacks about Outlook Client, since this issue is related to OWA, for further assistance I suggest you post the question in Exchange forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Use of AppSet virtual directory in BPC70MS

We are running OutlookSoft CPM 4.2 and using appset virtual directory directly.
The appset virtual directory is created by default in OutlookSoft CPM 4.2.
For example:
- Open input schedule through the virtual directory by Workbook.Add method from another input schedule.
- Save some kinds of data through the virtual directory by Workbook.SaveAs method.
However, there is no appset virtual directory in BPC 7.0 MS by default.
Therefore we have created the virtual directory by hand.
It seems that the virtual directory works fine when the client is Windows XP.
But there is a problem when the client is Windows Vista.
When we access the input schedule directly from the virtual directory,
the authentication dialog box appears for the first time in the Excel session.
We would like to omit the authentication dialog box because it is annoying for users.
Does anyone have some idea to solve this problem?

Using a virtual directory outside of osoft that's means you are not longer into SAP BPC.
So the authentication in that case it pure IIS authentication.
IIS authentication is Intergrated Windows authentication (using windows credential for login) or Basic authentication.
You are using IE for connection to IIS which means you have also security setttings from IE.
For example you have the setting for security that "prompt always user name and pwd" into IE.
Tools- Internet Option- Security
Click what kind of site it is your site: Intranet, or trusted site or Internet. and after that click to Custom Level and go to User Authentication.
If there is prompt user name and pwd then for sure every time when you will access any site (from coresponding group. Internet, Intranet or trusted sites) you will be always asked to input user name and pwd.
So first level of authentication for BPC is IE and IIS authetntication. In your case you don't pass this level of authetication.
I hope this will help.
Again it is not a good practice to have virtual directory outside of OSOFT. When you will do a transport into other enviroment it will represent again an issue.
Regards
Sorin Radulescu

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!

Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer

DR within Same Site Using Different Virtual Directory Names

We are deploying Exchange 2013 and have setup a set of 2013 servers in a different building we would like to use for DR.
We have 2 servers in our main datacenter behind a load balancer and 2 servers in a 2nd datacenter within the same DAG. So mailbox databases are already on the servers. However for the CAS role, we are looking at just setting the DR servers to
have different virtual directory names so in a DR situation, we just need to tell people to access owadr.domain.com instead of owa.domain.com. The DR servers would be behind a 2nd load balancer only configured to talk to those two servers.
Both of these datacenters are in the same AD site, and the network vLANS are stretched across each datacenter so DAG replication is already working. The primary serves are already working behind the production load balancer. Just need to make
sure we are going in the right direction for the DR setup. Our public certificate already names the names of owa.domain.com, owadr.domain.com, and autodiscover.domain.com on the cert. We are not really concerned so much with Outlook/ActiveSync
traffic in a DR situation, but would just like OWA to be a temporary solution while the main datacenter recovers. So a different virtual directory name should work right?

Hi,
From your description, I know four servers are in the same site but with different building. So you create two load balancer. And it seems you add the DAG members into Load Balancer. Could you confirm if you use WNLB?
In fact, WNLB can't be used on Exchange servers where mailbox DAGs are also being used because WNLB is incompatible with Windows failover clustering. If you're using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server
role and the Mailbox server role running on separate servers. See more details in the following link:
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx.For
For your environment, I have a suggestion: we can deploy two servers with only CAS role installed. One cas in one datacenter. Put them in one Load Balancer. Point OWA URL to this load balancer. So when one datacenter is down, the request will
go to anoter CAS in another datacenter. And the OWA URL is not changed..
But if you want to use two OWA URLs for each datacenter. owa.domain.com and owadr.domain.com. You can set OWA internal URL and external url on CAS servers in DR site to use owadr.domain.com. And ask users to login
https://owadr.domain.com/owa instead of
https://owa.domain.com/owa when the primary datacenter is down.
Sent By
Silver

What is Exchange Virtual directory and its role?

Hello there,
I am new to Exchange and I started reading about Exchange Virtual directories. I am struggling to understand the concept behind Virtual directories in Exchange and what is the role of this component. Can someone please shed some light and better yet supplemental
information to help me understand the concepts behind it? Let me know please. I am looking forward to any reply that would help.
Regards,
Lotusmail1
Franz Garcia

Hi,
Thank you for your question.
Exchange virtual directory is a directory which store some necessary URL to point to correspondent web page, those URL can provide service for user by Exchange server. it include the following component:
On Exchange CAS server:
Autodiscover: An important function of the Autodiscover service is to provide access to features for clients that are connected to your messaging environment. These features include the web-based offline address book (OAB), the Availability service, and
Unified Messaging (UM). The Autodiscover service must be deployed and configured correctly for clients to automatically connect to features.
ECP: The Exchange Control Panel is a Web application that runs on a Client Access Server providing services for the Exchange organization. This Exchange Control Panel is installed automatically when you install a Client Access server. To manage Exchange
from just about anywhere, you simply need to enter the URL path for the application in your browser’s Address field. You can then access the Exchange Control Panel. By default, the Exchange Control Panel URL is
https://yourserver.yourdomain.com/ecp.
EWS: Exchange Web Services virtual directories support the calendar sharing and other functionality offered by Exchange Web Services. The Exchange Web services included in Exchange provide an XML messaging interface that enables you to manage Exchange store
items and access Exchange server functionality from client applications.
Microsoft-Server-ActiveSync: Exchange ActiveSync is a client protocol that lets you synchronize a mobile device with your Exchange mailbox.
OAB: An offline address book (OAB) is a copy of an address list collection that’s been downloaded so a Microsoft Outlook user can access the address book while disconnected from the server. Microsoft Exchange generates the new OAB files and then compresses
the files and places them on a local share. You can decide which address lists are made available to users who work offline, and you can also configure the method by which the address books are distributed.
OWA: By default, when you install Microsoft Exchange 2013, you enable Outlook Web App. Microsoft Outlook Web App lets users access their Exchange mailbox from almost any Web browser.The Client Access server role provides proxy and redirection services for
Outlook Web App.
PowerShell: The Exchange Management Shell, built on Windows PowerShell technology, provides a powerful command-line interface for Microsoft Exchange Server 2013 that enables automation of administrative tasks. With the Shell, you can manage every aspect
of Exchange. You can enable new email accounts, create Send and Receive connectors, configure database properties, manage distribution groups, and more. The Shell can perform every task that can be performed by the Exchange Administration Center (EAC) plus
things that can't be done in the EAC. In fact, when you do something in the EAC, it's the Shell that's doing the work behind the scenes
On Exchange mailbox server:
PowerShell: this is the same with front CAS server.
We could refer to the following link:
https://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Jim Xu
TechNet Community Support

Web.show_document virtual directory

Hi,
I want to show a document (pdf) that is on the application server.
I know I can use web.show_document but the issue is where do I define virtual directory in forms 11.1.2.
I have weblogic installed, is there any where on weblogic where I can open a file in gui and define it?
Secondly what should I put into the file to define my virtual directory.
I looked up on support.oracle.com and they do have some examples but it is for 10g forms and the file they want me to open is orion-web.xml does not exist in 11.1.2.
So how can I do this in 11.1.2 forms.
Thanks
Munish

Munish,
You can define virtual directories in the httpd.conf which is found in the Oracle Http Server (OHS). It is highly recommended that you use the Enterprise Manager (EM) to make this change, but you can edit the file manually if you want.
Towards the bottom of the file, you will find the *<IfModule mod_alias.c>* tag. This is the section where you would add directory alias's. The syntax for an alias is basically: "Alias </directory alias/> </directory to alias/>"
For example, If I wanted to add an alias for a reports directory that exists outside of the WLS/FMw home I would add:
Alias /my_reports/ "/usr/app/my_program/reports_dir/"This defines the basic alias, now you need to set the attributes of the alias. In this same tag section ( *<IfModule mod_alias.c>* ) as you scroll down, you will see directory tags. For example: <Directory "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/icons">
In this section, you will need to add a new <Directory> entry for the alias you just created. Using the "MY_REPORTS" alias above, I would add:
        <Directory "/usr/app/my_program/reports_dir">
                Options MultiViews
                AllowOverride None
                Order allow,deny
                Allow from all
        </Directory>Notice, that I am specifying the actual directory path not the Alias directory path. For more detailed information, take a look at My Oracle Support (MOS) document *How to Create Virtual Mappings in Forms 11.1.x [ID 1063043.1].* You do need a MOS account to access this document.
I forgot to mention that after you make these changes you will need to restart the OHS service.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Aug 1, 2012 8:10 AM

Virtual Directory Browsing in IIS Is what in OSX Server?

Ok, forgive my ignorance. I am coming from a better understanding of Microsoft IIS..
Basically what I am looking for is.. In my Windows Server I would have a Partition Drive with a letter.. lets say e:\ and call the drive docs with data files saved on it. I would then go into IIS and setup a Virtual Directory of that E drive.. So then I could have people own a browser at www.website.com/docs and from there it would list all the files allow them me to download what they needed.... Yes, I know there is also a VPN option.. However, this is easier for my case...
I think in Apache it would show a page and in bold letters "Index Of /" then list all the contents in that drive or folder..
I have tried looking up what it would be called in Apache.. Yet not yielded much luck..
Anyone have ideas?

Yes! You are correct, I actually got it to work about 5 mins ago.. Thank you for the reply..
I found a manual from Apple "web tech" that says to insert:
<Directory "/Users/refuser/Sites"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all</Directory>
I inserted this into the /etc/apache2/sites/website.conf file or even the Virtual_Host_Global.conf file
I changed the directory to the path I have the "Aliases and Redirects" such as /Volumes/Web
Works great!
HOWEVER....... I have noticed.. that every time I then goto edit something in the Server Admin Console for Apache.. It removes the code out of the .conf files..
I have tried making .htaccess files in the Drive with no luck or even adding a httpd.conf and no luck..
It does seem to give Directory indexing when I add it into the location listed above.. yet no where else.. kind of stumped again..
Any ideas?

Exch2k13 - OWA Virtual Directory - this option ('AnonymousFeaturesEnabled') is a security flow??

Similar Messages

Maybe you are looking for