Exchange 2007 wont send to AOL and a few other domains

Have tried everything.  We switched from Time Warner Cable, to AT&T firber optic, and now we cant send email to AOL, and a few other domains.  rDNS is setup correctly, and still no go.  Any help would be good.

Hi,
How about the internal communication?
Agree with both MAS and Rich, detailed errors will be helpful for the further troubleshooting.
Please use mxtoolbox to check blacklist.
Please check the Send Connector settings.
Thanks
Mavis Huang
TechNet Community Support

Similar Messages

  • My iphone 4 wont send picture mail and my mms in on

    my iphone 4 wont send picture mail and my mms in on

    Are you trying to send the pic with Messages or Mail?
    If it's with Messages, this Apple doc might help ya out -> iOS: Troubleshooting Messages
    If it's with Mail, you may have to try another email provider or connecting to the Internet over another network.

  • My mac wont send emails from yahoo or any other websites when using an external USB modem!

    My mac wont send emails from yahoo or any other websites when using an external USB modem! I have checked the settings and they seem correct. Can anyone help? I do not have snow leopard. I can log on my email accounts, open my incoming emails (with difficulty coz it asks me to "try again" ) but I can never send emails, I always get: "sending is taking a little long, try again".
    What is the problem? this is a hair puller !!!

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

    Hi please help me I'm useles with these thing. I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

    I'm sorry we cannot help you.
    You have Jailbroken your device.  Apple does not support Jailbreaking and as such having done so has voided your warranty and forfeited any support from Apple and by extension these forums. We are not allowed to discuss Jailbroken devices in any way by the Terms of Service of the forum.
    You will have to find help elsewhere. Ask the person that installed Cydia to restore the phone.

  • I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen.  Same thing in itunes, itunes u, app store, and a few other apps won't connect.  Safari seems to be working fine.

    I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen.  Same thing in itunes, itunes u, app store, and a few other apps won't connect.  Safari seems to be working fine.

    I had this same problem.  Tried everything the internet said including a full restore.  Which was terrible.  Nothing worked until.....go to general...reset....reset all settings.
    You had to go back in and reset anything you customized afterwards, however it does not allow the store to load.  Thanks! 

  • Few countries bank Account Number is mandatory and for few others it is not

    For few countries bank Account Number is mandatory and for few others it is not mandatory in the Payment Transaction Tab in Bank Details of Customer.
    My question is that why will anyone not fill bank account number when he has given Bank Key and other details.
    Is it related to Payment by other methods , other by Cash.

    Hi Ranjeet,
    You should ask this question to the person who has information about bank details but not process them.
    Yes bank account is related with payment transactions. If you want you can make this field mandatory in customizing;
    SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Define Account Groups with Screen Layout (Customers) or Define Screen Layout per Company Code (Customers) or Define Screen Layout per Activity (Customers)
    You can also set message F2813 (Enter an account holder) as error in customizing;
    SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Change Message Control for Customer Master Data

  • [svn:fx-trunk] 9892: Panel skin changes per XD spec, and a few other Panel Skin bugs.

    Revision: 9892
    Author:   [email protected]
    Date:     2009-09-01 16:06:51 -0700 (Tue, 01 Sep 2009)
    Log Message:
    Panel skin changes per XD spec, and a few other Panel Skin bugs.  Default Panel size changed to match spec.  Panel titles are now single-line and show ellipsis.
    QE Notes: Panel-related bitmap compares will need upgrading
    Panel_Properties_title5
    Panel_Properties_DfrdInst_none
    Panel_Properties_DfrdInst_auto
    Doc Notes: None
    Bugs: SDK-21680, SDK-21671, SDK-21666, SDK-19962, SDK-19959
    Reviewer: Ryan
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/managers/Panel
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21680
        http://bugs.adobe.com/jira/browse/SDK-21671
        http://bugs.adobe.com/jira/browse/SDK-21666
        http://bugs.adobe.com/jira/browse/SDK-19962
        http://bugs.adobe.com/jira/browse/SDK-19959
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ApplicationSkin.mxml
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
        flex/sdk/trunk/frameworks/projects/wireframe/defaults.css
        flex/sdk/trunk/frameworks/projects/wireframe/src/WireframeClasses.as
        flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/PanelSkin.mxml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/ApplicationSkin.mx ml

    New forum: http://forums.adobe.com/community/flash_builder

  • HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

    Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
    <Edited by Host>

    What other solutions have you tried?
    This may help you:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Exchange 2007 OWA sends attachments Outlook connector clients cannot send attachments.

    Exchange Server 2007 SP1 + Rollup ***Problem with sending email attachments from Outlook 2007***
    * Inbound mail arrives in OWA and Outlook normally with and without attachments.
    * OWA email to external email account with attachment goes thru successfully.
    * Outlook 2007 sends to an external email address with attachments the message does not arrive at the external mailbox.   The messages leave Outbox but are never delivered. The messages appear in Sent Items also.
    * Outlook sends non attachment emails to external addresses successfully.
    * Outlook sends email attachments to local domain accounts fine.
    #1 Exchange Server on Server 2013 fully patched problem commences. Exchange Server on version less than first RTM release of Exchange 2007.
    #2 Outlook profiles were changed to see if that is the problem.
    #3 Upgraded Exchange to SP1 and Rollup 10(Rollup was autodownloaded by MSUpdate)
    #4 Ran EXBPA nothing of any interest in the report.
    --Unified Messaging not configed (Done nothing)
    --SenderID (Re-enabled) I had shut all of the antispam to eliminate these.
    -- Junk Store threshold not configed (No change)
    Any suggestions to get Outlook clients capable of sending attachments configured.
    Thx,
    -Scot

    Hi Scot,
    Providing some information on Poison Queue:
    The poison message queue is a special queue that's used to isolate messages that are determined to be harmful to the Exchange system after a transport server or service failure.
    The messages may be genuinely harmful in their content and format.
    Alternatively, they may be the results of a poorly written agent that has caused the Exchange server to fail when it processed the supposedly bad messages.
    The poison message queue is typically empty. If the poison message queue contains no messages it doesn't appear in Queue Viewer or
    Get-Queue results. The messages in the poison message queue are never automatically resumed or expired. Messages remain in the poison message queue until they're manually resumed or removed by an administrator.
    According to the description above, I suspect Outlook 2007 changed the email's format when send email with attachment. The reason as below:
    If the original email's (with attachment) content or format is harmful to the Exchange 2007 server, it will go to the Poison Queue when sending via OWA. However it didn't, sending via OWA is perfect. So I suspect it is an issue on the Outlook 2007
    client side.
    Please using Pipeline Tracing to verify whether there is something changed during transmission.
    More details in the following article:
    Using Pipeline Tracing to Diagnose Transport Agent Problems
    http://technet.microsoft.com/en-us/library/bb125198(v=exchg.80).aspx
    If it is convenient, I suggest doing following tests to narrow down this issue:
    Note: Same content, same attachment, same format.
    1. Please using Outlook 2010/2013 or others' Outlook clients for testing.
    2. Please change to another format for testing. More details in the following article:
    Change the message format to HTML, Rich Text, or plain text
    http://office.microsoft.com/en-001/outlook-help/change-the-message-format-to-html-rich-text-or-plain-text-HP001232996.aspx
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Exchange 2007 Multiple Send Connector Cost Best Practice

    Hi,<o:p></o:p>
    I am running exchange 2007 SP2 and have 2x exchange connectors set up with an equal default cost of 1.<o:p></o:p>
    Connector 1 is set to * address space and should forward all emails to two email security/management servers<o:p></o:p>
    Connector 2 is set to a internal sub domain server whose purpose is to file the emails on a CMS.  Emails are marked for "filing" when
    the Outlook plugin adds the connector 2's subdomain address into the bcc field.<o:p></o:p>
    What I want to clarify is if I was to change the cost of Connector 1 to 0 would all mail then only be routed via this connector?<o:p></o:p>
    I presume it would ignore the 2nd connector because the 1st connector's address space is *  and thus no emails would route through connector
    2 and therefore be filed to CMS ?<o:p></o:p>
    What would the best practice be for the costs of each connector ??<o:p></o:p>
    Thanks<o:p></o:p>
    Mat<o:p></o:p>

    I don't believe that 0 is a valid cost for a connector (I get an error if I try to see a connector with that).  If you have two connectors, Exchange will send to the one that matches the address space most correctly.  If you had no second connector,
    connector 1 would attempt delivery to your CMS.  Since you have that second connector, those messages will be delivered by it.
    Connector costs are normally used when you have multiple connectors with the SAME address space, and allows Exchange to fail from one to another when the preferred is not operational for some reason.  For example, if you have an ISDN line as your backup
    Internet connection, you want to give connectors that use it a higher cost than your MPLS connections use.
    I'll add that in most environments I've worked for the past several years, this redirection is handled at the network layer rather than the application layer.

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • Outlook 2007 wont send email

    I can't seem to get Outlook 2007 to send my iCloud email. The iCloud settings were configured utilizing the iCloud synch software. Anyone have an solution? I've tried changing the SMTP to smtp.me.com and that did not work. Originally, I couldn't send on my iPhone too, but I entered a secondary SMTP of smtp.me.com and that seemed to fix it on my iPhone.
    Vista/Outlook 2007/iPhone 4 (at least until UPS arrives today) :-)

    I've solved the problem: I changed the SMTP to p99-smtp.mail.me.com and it is working! :-)
    Note: in my previous post I miss typed the SMTP...I meant to type smtp.mail.me.com

  • Exchange 2007 (sbs) export maiol contacts and distrubution lists an import in to Exchange 2010 (sbs)

    Hello, I have a server running SBS2008 with exchange 2007.
    I need to export all Mail Contacts, only need to export Dispaly Name, Alias and External email address.
    I then need to import them into my new server running exchange 2010
    Then i need to to dthe same with the distrubuition lists and add the contacts inoot the relavant groups.
    Does anybody know if this is possible please, if so  can anybody help me?

    Hi
    Perhaps you can export to a csv and then import from the .csv in exchange 2010?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Oops...mail wont send large file and I cant get it to stop trying.

    I was sending a ;large file (116 megs) email to my wife by mistake, thinking the file was the resized images I had. I was sending this via .me account. When I open mail now, my .me account still tries to send the files, and I cant make it stop. Its not in my drafts or outbox, but the cog spins forever on my .me account. I then see a folder which says it is a recovered mail folder and those images are in two emails in that folder. Any help? I just want my .me inbox to recieve mail again and to send mail when I need it to. This has been going on for two days now.

    Search using the name of this large file in Spotlight -- anything show up in an unexpected location?
    If you click on Window in the menubar, and choose Activity, what does it says is in process?
    Quit Mail, and hold down the Shift key while clicking to relaunch Mail -- make any difference?
    Ernie

  • Transparent spry menu that has a background color on sub menus and a few other problems(Please Help)

    Hi im a noob at dream weaver and i've been trying to create a menu and i have been having problems with this menu bar i don't know what to upload and i have made a topic about this before but i only got one reply and so i am trying to make my menu bar transparent and then the sub menu's colored with the color code #1A1A1A and the menu bars that have been color background are only the sub sub menu bars if you know what i mean and also my other problem is the spacing i have between each option is really uneven is there a way to make them evenly sperated apart from each other rather than just the size of a "box" that the text is in. Here is my SpryMenuBarHorizontal.css code
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
              margin: 0 auto;
              padding: 0;
              list-style-type: none;
              font-size: small;
              cursor: default;
              width: 100em;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
              z-index: 1000;
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 18px;
              position: relative;
              text-align: left;
              cursor: pointer;
              width: 10.8em;
              float: left;
              visibility: visible;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 100%;
              z-index: 1020;
              cursor: default;
              width: 8.2em;
              position: absolute;
              left: -1000em;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
              left: auto;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
              width: 15em;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
              position: absolute;
              margin: -5% 0 0 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
              left: auto;
              top: 0;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    ul.MenuBarHorizontal ul
              border: 0px solid #1A1A1A;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
              display: block;
              cursor: pointer;
              background-color: transparent;
              padding: 9px;
              color: #FFF;
              text-decoration: #1A1A1A;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
              font-weight: bold;
              font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
              font-size: 18px;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
              background-color: #0048ff;
              color: #EEE;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
                          background-color: #1A1A1A
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
              background-color:#1A1A1A;
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
              background-color:#1A1A1A
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
              background-color: #1A1A1A
              background-repeat: no-repeat;
              background-position: 85% 50%;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
              position: absolute;
              z-index: 1010;
              filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
              ul.MenuBarHorizontal li.MenuBarItemIE
                        display: inline;
                        f\loat: left;
                        background-color: #1A1A1A;

    See if this post helps :
    http://forums.adobe.com/message/1997762#1997762
    and this one:
    http://forums.adobe.com/message/1898539#1898539
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    http://twitter.com/nadiap

Maybe you are looking for

  • How To Read RTF file in JAVA?  Using  iText?

    How To Read RTF file in JAVA?  Using  iText?..... import java.io.*; import com.lowagie.text.*; import com.lowagie.text.rtf.*; public class RTF3 { public static void main(String[] args) { // System.out.println("This example generate a RTF file name Sa

  • GL Trial Balance Report with Effective Dates as Parameters

    We have a requirement to show the GL Trial Balance report with Effective dates as Parameters. Current Analysis: The Journals get updated with corresponding CCID in GL_BALANCES table when the Journal is posted. GL_BALANCE is SOB specific, if the SOB h

  • Delete Tabs in Numbers for iPad

    This might be a stupid question, but i can't figure out how to delete tabs in numbers for the iPad. Does anyone know how to do this?

  • IPhoto 6.0.4 hangs/crashes

    I cannot construct a web page, edit a photo, double-click on a thumbnail, layout a calendar, or make an iPhoto book without it hanging mid-process. Oddly enough, if I change to full screen mode, I can view any photo and even edit it. I have reinstall

  • CRMD_ORDER: how to set default values for Requester and Change Manager

    Hello Folks, how do I set default values in TA crmd_order? I drew my organizational hierarchy using TAs bp and ppoma_crm. When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer)