Outlook 2007 wont send email

I can't seem to get Outlook 2007 to send my iCloud email. The iCloud settings were configured utilizing the iCloud synch software. Anyone have an solution? I've tried changing the SMTP to smtp.me.com and that did not work. Originally, I couldn't send on my iPhone too, but I entered a secondary SMTP of smtp.me.com and that seemed to fix it on my iPhone.
Vista/Outlook 2007/iPhone 4 (at least until UPS arrives today) :-)

I've solved the problem: I changed the SMTP to p99-smtp.mail.me.com and it is working! :-)
Note: in my previous post I miss typed the SMTP...I meant to type smtp.mail.me.com

Similar Messages

  • Outlook 2010 wont send emails with attachments

    Hello
    I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
    One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
    But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
    The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
    Here is what I did:
    1. Re-create Outlook profile: wont work
    2. Re-create Windows profile: wont work
    3. Check ip settings: fine
    4. Try in OWA: wont work
    5. Look at Exchange settings for outgoing email size: 10mb
    6. Load my user's Outlook profile on another LAN: works fine
    That last point made me thought about a potential problem on the remote user's lan. So I did
    7. Check VPN config between the remote site and IT site: fine
    After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
    user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
    Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
    Hope it helps someone!
    Martin

    Hi Martin,
    Thanks for your sharing:)
    If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
    Regards,
    Winnie Liang
    TechNet Community Support

  • My mac wont send emails from yahoo or any other websites when using an external USB modem!

    My mac wont send emails from yahoo or any other websites when using an external USB modem! I have checked the settings and they seem correct. Can anyone help? I do not have snow leopard. I can log on my email accounts, open my incoming emails (with difficulty coz it asks me to "try again" ) but I can never send emails, I always get: "sending is taking a little long, try again".
    What is the problem? this is a hair puller !!!

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • HT201320 my iphone 4 wont send emails

    I'm having two major issues. First, my iphone 4 wont send emails. Second, my deleted emails keep coming back. Help!

    If your phone won't send emails most likely you did not enter your username and passcode for your mail account a second time, for the outgoing mail server.
    Deleted emails coming back is a more complex problem. This will occur if a mail fetch on a POP3 account is not closed properly. This can happen if you attempt to read email before it finishes coming in. When you open the email app wait until all email arrives before reading and deleting it. The phone will beep when the retrieval is finished.

  • HT4864 unable to convert Outlook 2007 to send or receive email

    I have postponed until almost the last moment (June 2012) conversion of my mobile me email address to the iCloud.  Alas, Apple has now forced me to abandon my quite functional MacBook Pro (which won't run Lion and thus is not compatible with iCloud).
    But I digress.  I am now relying upon my PC laptop with Windows 7 and Outlook 2007.  I have followed the instructions on the Apple support site and various alternatives suggested on other websites (e.g. use "p01-imap.mail.me.com" or "p02...." instead of "imap.mail.me.com" as the incoming mail server).  However, none of the variations works.  I always get error messages including "Log onto incoming mail server (IMAP):  Your server unexpectedly terminated the connection...." and "Send test email message.  None of the authentication methods supported by this client are supported by your server."
    What else should I try?
    Perhaps I should just abandon my iCloud/mobileme/mac.com address?
    Bob

    Maybe your firewall is blocking the ports
    I would troubleshoot by making a hotmail or gmail account and connect to to see if that works

  • Send Email via Outlook 2007 with "send to field" blank.

    I have a simple question:
    - How do I get the user's Outlook 2007 "New Email Message" box to open up when the user clicks on a button called "Send Email"?
    - Outlook is the default Email client on each user
    - I need the Outlook box to open, with the following values prefilled:
    To: blank (so the user can type in an address)
    From: [email protected]
    Subject: blah, blah, blah
    Body: Hello, etc...
    The part I'm having trouble with is getting the Send To field to be blank or unfilled?

    Leonard, Thanks for the quick post..
    Along with your tip, I ended up doing the following, which worked perfectly:
    <cfset to_email="">
    <cfset subject_text="Here is the Link to the Form..">
    <cfset body_text="Welcome to the Step by Step Procedure!%0A">
    <cfoutput><a href = "mailto:#to_email#?subject=#subject_text#&body=#body_text#">Click to Send Email Link to Customer</a></cfoutput>
    Note: I used the %0A at the end of my Body text to help with formatting.
    One other question: How do I make this code above run directly from my SPRY menu?
    - Currently I have to open another form and then click on hyperlink text on the form
    - I would rather bypass the new form page altogether, and just call the code from my SPRY menu?
    - Here is the code behind my SPRY Drop-Down menu item:
    <li><a href="form_emailLink.cfm" target="_blank">Send Form Link</a></li>

  • IPhone wont send email from a certain mail account

    I know the settings are right, but the iPhone wont send mail from one of my mail accounts (hosted by the company i work for, which offers mail hosting as a service, and has hundreds of other iPhone users with the same account settings.)
    The progress bar that indicates "sending" zips by suspiciously quickly when I hit Send, but there is no audio confirmation. Then the email is gone - its not in my Sent Items folder, and its not in the Drafts folder and its not in my broom closet.
    From what I understand, if one SMTP server isn't available, it should default to the AT&T SMTP server, but it apparently doesn't even get that far, because the phone must think it's sent the message, or it would end up in the Drafts folder (or Outbox, I can't recall), which is what I would normally experience if I had no service at the time I was sending the message. I have two other accounts that work normally on the iPhone. Nothing has been recently changed with the SMTP server in question, which works fine with all my other devices.
    I've tried:
    • deleting the account and re-adding it manually (four times)
    • deleting the account and syncing it with my computer (three times)
    • hard resetting the iPhone
    • ensuring that the primary SMTP server for this account is, in fact, switched to "On" in Settings->Mail, Contacts, and Calendars, <mail account>-->SMTP (which brings me to another question: how do I edit this list? Is it automatically populated by the accounts in my Mail app?
    • screaming from my back porch
    Ideas?
    Email Account type: IMAP
    Authentication type: MD5 with SSL
    Port: 587
    8GB 3G iPhone, Software version 2.2.1

    One thing that might help.
    If your primary server is hosted by your company, double check the outgoing settings.
    Host Name:
    Use SSL:
    Authentication:
    Server Port:
    If it zips through your primary server without effect, try turning the primary server off and one of the secondary on.
    If connected to Edge or 3G, you can use ATT's SMTP server.
    If issue still persists, then set up a gmail or yahoo account to test with.
    Both are free email services.
    If still fails, then general troubleshooting might help.
    Here are a couple of articles from the apple support website that might help out.
    http://support.apple.com/kb/HT1737
    http://support.apple.com/kb/HT1414
    http://support.apple.com/kb/TS1275
    You might need to reset and or restore the iphone to resolve any software issues.
    Hope this helps.

  • Iphone 4 wont send emails

    Why wont my iphone 4 send emails?

    I'm not sure if this will work but go into setting and click on whatever email acct it is, the on outgoing email still in settings put your email password under whatever server your email uses and see if it verifies and try sending out an email. I hope I'm clear enough.

  • N900 wont send emails (blueyonder)

    help needed. Anyone any idea why i can only send emails when my n900 is connected to my home network?
    They wont send over 3.5g 3g or 2g
    Any ideas?
    Thanks
    All my port numbers etc are all correct - i checked with my email provider (blueyonder)

    I'm afraid I can't answer your question, but I have the same problem with Mail for Exchange, it simply won't connect! Anyone have any ideas?

  • Outlook 2007 POP3 sent emails don't work

    about 3 days ago our sent emails on our 2 user  btinternt accounts stopped being received.  it's definately an outlook setting problem as emails sent directly from btmail work fine.  I've attempted to use all the settings recommended by BT to no avail.  I have 2 other non bt accounts in outlook and they send fine.  receiving emails no problem. tried changing to IMAP but that didn't cure the problem, so reverted to pop3, which suits us much better.  any ideas please?

    I use the following settings in Outlook and they work without problem. It may be that you will need to delete the account and set it up again. If you do delete it make sure that you back up any emails that are on your computer.
    Your Name
    Email address: Full btinternet email address
    Account type: IMAP or (POP)
    Incoming server: mail.btinternet.com    
    Outgoing server: mail.btinternet.com
    Logon information:
    User name: prefix only of email address
    Password: Email password
    Tick remember password
    Do not tick Require password auth (SPA)
    Click Button More settings
    Tick box my out going server requires authentication
    Tick box use same as incoming
    Do not tick log onto incoming server
    Advanced Button
    Incoming server 993 or (POP 995) Tick requires SSL
    Outgoing server 465 Use following type encryption SSL

  • Outlook 2007 receiving duplicated emails

    I am receiving duplicated emails in Outlook 2007.
    I recently moved from Outlook 2003 to 2007 I do not know if this is significant or not. I do not believe the problem started immediately upon the update.
    Solved!
    Go to Solution.

    PaddyRay wrote:
    I am receiving duplicated emails in Outlook 2007.
    I recently moved from Outlook 2003 to 2007 I do not know if this is significant or not. I do not believe the problem started immediately upon the update.
    Hi.
    How many accounts are you checking ?
    Are you receiving the exact same duplicate emails each time you check, if so - how many ?
    One reason for possible duplcate receipt can be due to the server not completing a "fetch" session. If this signal is not received at the server, then it assumes that the emails haven't been received, so doesn't really anything like mark them as received (or read, or sent to the Trash folder). Hence another server check for emails will receive these same ones again (and any new ones).
    As there have been server issues for a while, which may still affect some accounts, then this may have a factor.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • HT204150 Installed latest iCloud version today and now Outlook can't send emails any more

    Somehow the iCloud plugin in Outlook marks every email in the out-tray as "not ready to send".
    But only when the out-tray is being displayed. Hence one workaround would be to have any other
    tray/folder open while sending emails.
    Does anyone know how I can fix this?
    For now, I disabled the iCloud PlugIn and can send emails again.

    Uninstall iCloud, reboot, reinstall iCloud.

  • My Mac Outlook 2011 Stopped Sending Emails for all POP Accounts from Different Providers

    I've had this problem before, but this time I am truly dumbfounded. My Outlook 2011 has randomly stopped sending emails, but I can still receive them. This has happened a few times and I normally change the ports/SSL and I can get it to work. But now I am at a loss. I have several email accounts that I manage. One of which is GMAIL, using IMAP, and this is the only account that currently works find receiving and sending. My POP accounts, four of them, all cannot send emails. They can only receive. One of them is with GoDaddy, and the other three are with an Asian company. I can't find any help on this. I've upgraded Office to the latest version. I've even deleted the accounts and added them back in, and I still can't send email. I'm frankly getting exhausted and sick of this type of problem happening. I honestly use this program and my MacBook Air to send clients information...only to find out hours later that a mail never sent because it's been stuck in my <hidden> Outbox in Outlook 2011. This has hurt me now badly on several occassions. Please HELP!

    All SMTP servers are set correctly as far as I can tell, the connection doctor says everything is fine, and I removed all my accounts to re-add them.  I added one and tried to send a message--stuck in the outbox--failed.  I added another account and deleted the first one and tried to send a message--stuck in the outbox--failed.  I'm pretty convinced the problem is with Mac's Mail client...I can send email from anywhere I've tried except for Mac's Mail client.  Thanks for the help.
    MtM

  • Problems with contacts in Microsoft Outlook 2010, when sending emails to a contact from Outlooks adressbook

    Hi!
    I can´t send any email directly from Contacts in My Microsoft Outlook 2010 Swedish 32 bit version (Computer has Windows 7 professional 64 bit Swedish system).
    When I type the email address directly in the field all functions well.
    When I take the mailaddress from Contact its looks like:
    Firstname surename ([email protected])
    I Think it has the wrong format
    Earlier the adress from Contacts was
    Firstname Surename <[email protected]>
    How can I make the Contacts addressbok back to the earlier format?
    I hope someone has an answer to my problem!
    Greetings
    Sixten

    Hi,
    Any symptoms when you can't send emails from Contacts? Any error message?
    Based on my research, Firstname Surname <[email protected]> is specific to the contacts in Global Address List (GAL), while for other contacts in Outlook Address Book, it displays as Firstname surname ([email protected]).
    If a contact is stored in both GAL and Outlook Address Book, it follows the rule in GAL which means it displays as Firstname Surname <[email protected]>.
    You may learn other information about Display the Contacts from this article below:
    http://office.microsoft.com/en-001/outlook-help/display-the-contacts-list-in-last-name-first-name-format-HA010355556.aspx#_Toc260146235
    Feel free to post back if you have further questions and kindly answer my questions above.
    Regards,
    Melon Chen
    TechNet Community Support

  • N95 Wont Send Email

    My N95 wont allow me to send emails. When i do, i get the usual which access point would i like to use, then it asks me the usernam & password even tho they are already filled in, i accept and then it goes back to access point chooser, then back to password, and so on in a loop. What do i do?
    The Details are correct, because i can recieve emails, just not send.
    Nokia Addict: 5110, 6210, 8310, 3510, 3300, 3220, 5100, 6280, N80, N95

    I also had this problem. Although my settings were correct i could recieve but not send email. To solve it I had to enter my mobile provider (O2) settings in the SMTP section, not my email provider settings.

Maybe you are looking for