Exchange 2013 OOF not working for migrated accounts

We are having a problem with the Out of Office responses in Exchange 2013.
We are getting the error “Your automatic reply settings cannot be displayed because the server is currently unavailable.
Try again later.” I have been through several help articles that I found on the internet and so far none have resolved the problem.
Autodiscover is working as expected when connecting an Outlook client – and I can access the url identified by the “Test Email AutoConfiguration” tool for OOF – it returns the xml document as expected. New accounts created in this domain work, but the
problem occurs accounts that were migrated from Server 2003 domain running Exchange 2007. I can also access the OOF settings for a migrated account using OWA. The new domain is 2012 and Exchange 2013 and accounts are being migrated using ADMT through a trust,
which is working as expected. Only the accounts have been migrated (not mailboxes) and I am not planning to connect the old exchange to the new to do mailbox moves – instead I am just planning to export psts from the old Exchange 2007 server
and then import them to the 2013 server. The client dns settings are correct and all other connectivity seems fine.
Any ideas are greatly appreciated. I have also tried creating a new Outlook profile, turning off Cached Mode, and creating an entirely new Windows profile and Outlook profile.
I have also tried using Outlook 2007, Outlook 2010 and Outlook 2013.

I solved this - EWS was disabled for the mailbox. Set-CASMailbox -Identity User -EWSEnabled $true fixed the problem.

Similar Messages

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Exchange 2013 SP1 server working for several months now messages are getting stuck in drafts folder

This a small, simple environment. There is a MS Server 2012 R2 server hypervisor with a MS Server 2012 R2 VM running Exchange 2013 patched to SP1. This server has been deployed into production and passing mail without issues for several months.
Upon initial deployment, we experienced the issue that many have reported and that has been widely documented where Mail Flow works fine inbound, but outbound will stick in the drafts folder. We resolved the issue by manually configuring the IP Address of
our internal DNS server (which is an installed role on our hypervisior / base layer server). The issue was immediately resolved and mail was flowing in both directions without issue. We later installed SP1 and there was no issue. Mail has
been flowing normally all the while.
Now fast-forward through several weeks of reliable mail delivery... We experienced a power loss and a system shutdown and upon reboot, inbound is working and outbound goes to drafts. I've confirmed DNS Lookup settings in ECP still points to our internal
server as previously configured. Both servers have internet access, NSLOOKUP returns expected values, and DNS appears to be working normally.
I'm not sure if we had an MS Update that installed with the reboot that caused the breakage, if there was a lingering settings change that took effect on reboot, or what is causing the interruption. I'm looking for some fresh ideas on where to look
for answers, and all the information available on the drafts folder issue points to DNS settings that have already been put in place.
Any constructive ideas are welcome! Thanks in advance.
David

Amit,
Long story short, I'm not sure how or why, but there were a few automatic services that were not starting "automatically." I'm used to seeing some services that are triggered by the application to start and stop on their own, so I didn't necessarily
panic when there were a few automatic services that were stopped..
However, The MS Exchange Health Manager, and the Mailbox Submission services weren't running. After manually starting the services my drafts folder emptied and we are back in business.. Maybe not "innovative" as you said, but it certainly put us on
the right track. We were looking so hard at DNS because of all the reported cases of "stuck in drafts" being related to DNS, we totally overlooked the obvious, so THANKS!
Now the only question is, what stopped the services and why did they not restart automatically??

Exchange 2013 autodiscover not working from Externally

Hi
i have exchange 2010 sp3(2Mb, 2hub/cas). I installed exchange 2013 servers(2MB, 2CAS). For coexistence i generated new certifcate with new cas from third party. I installed that certificate in that cas and assigned all services. i changed all my virtual
directories service url. I didnt import the new certificate to exchange 2010 cas server and i didnt change url to legacy link.But still iam able to check exchange 2010 user mailbox owa, activesync and autodiscover without any certificate error.
If i try to browse owa, its going to 2013 server, if user is exchange 2010 user and its redirecting to exchange 2010 owa with same link.
But i dont know how above things is working without importing to new certificate...
Main problem is i am not able to configure exchange 2013 users outlookanywhere, Autodiscover from externally...
So in tmg i pointed the outlook anywhere ip address new cas server, now both exchange 2010 and exchange 2013 users while OA from external, its keep on asking password... Not accepting it...
Please help me to fix this issue..

Hi ,
On TMG please have the outlook anywhere rule like below and check the status.
Step
1 :
On the TMG rule - >authentication delegation ---> select the option "no delegation users can authenticate directly"
Step
2 :
on the users tab in the TMG rule - just add "all users" group on that rule.
By having the above settings we have avoided the issues in your environment.
Note : Based on the above setting's , Each and everyone in exchange will have a access to the outlook anywhere from external world , because there would not be having any restriction on the TMG rules.
Please have a look in to the below link , it will give you some ideas which is related to TMG
http://blogs.technet.com/b/exchange/archive/2012/11/21/publishing-exchange-server-2013-using-tmg.aspx
Thanks & Regards S.Nithyanandham

Exchange 2013 ActiveSync not working

Hello everyone,
We seem to be having problems with our ActiveSync not working anymore. Users with mobile devices can not access their mailboxes. We have checked just about every setting and the IIS logs and can't find an answer to this issue. Microsoft's Remote Connectivity
Analyzer shows the following error which we can not find an answer for anywhere.
An ActiveSync session is being attempted with the server.
    Errors were encountered while testing the Exchange ActiveSync session.
   Test Steps
   Attempting to send the OPTIONS command to the server.
    Testing of the OPTIONS command failed. For more information, see Additional Details.
   Additional Details
    A Web exception occurred because an HTTP 400 - BadRequest response was received from IIS7.
Thanks!

Hi,
Did you ever find a solution to your problem? I have exactly the same problem with a fresh install of exchange 2013. Can access mailboxes via outlook 2010 and owa but can't connect any mobile device. I'm stumped...
a 400 IIS Bad Request error indicates token bloat. Are you proxying to 2010 mailboxes?
The usual fix is to set the following reg keys on the CAS receiving the requests following the first step described in this article that is similar:
http://support.microsoft.com/kb/2491354
Create the following registry keys on all CAS servers (both Exchange Server 2007 CAS servers and Exchange Server 2010 SP1 CAS servers) in the Active Directory site:
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value data: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value date: 16777216
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

2013 Workflow not working for tenant admin

Hi
I've been struggling with an issue developing a site for a client. They have their own SharePoint 2013 tenancy, which we can manage as a partner. I can log in to the site with my own company account linked to Office 365, and can do everything I need to in
terms of site administration.
However, I've run into a problem whereby although I can create and publish SharePoint 2013 workflows, I cannot run them successfully. If there is anything in the workflow such as writing to the history list, the workflow hangs with the status "Started"
and "Activity in progress" (no error message).
I've got around the problem by testing the workflow as a user from our client's tenancy, but I'm curious as to why my user doesn't work for this. It works fine for everything else, including SharePoint 2010 workflows. Is there some permission somewhere that
needs to be set, or is this by design?
Duncan

Hi Ganesh,
Based on your description, I recommend you verify the things below:
Check if the SharePoint search service account is added in the Windows Authorization Access Group in Active Directory.
Check if the non-admin users have permission to view the results searched.
Check if the inline search can work in lists’ pages or libraries’ pages.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Script logic not working for GL account with Zero balance

Dear Experts,
I have a scenario where the GL account balance in ECC is 0 and when a script logic runs in BPC the same should capture a closing balance as "1".
Though I have written the below logic, this is not getting executed and writing back the value as "1".
Kindly help me on the same.
*WHEN ENTITY
*IS "ABC"
*WHEN ACCOUNT
*IS "20300000"
*REC(EXPRESSION = 11, ACCOUNT = 20300000,FLOW = F99, ENTITY = ABC, PROFITCENTER = 130010 , INTERCO = I_NONE , CONSOSCOPE = G_NONE, CURRENCY = LC ,CATEGORY = ACTUAL, AUDITID = INPUT)
*ENDWHEN
*ENDWHEN
*COMMIT
Regards,
Shilpa

Hello Vadim Kalinin,
Thanks for the very swift help.
Merger of the client happened in 2007. ECC is using the " 20300000- change in fair value " account to record both pre-acquisition and post-acquisition values.
Since the treatment of pre-consolidation and post consolidation reserves is different the split of the amount between pre and post-acquisition values has to be done. For the same post acquisition value is reduced from this account using a script logic as below.
WHEN FLOW
*IS "F99"
*WHEN ENTITY
*IS "ABC"
*REC(EXPRESSION = ([ACCOUNT].[20300000] -3258603),ACCOUNT = 20300000,FLOW = F99, INTERCO = I_NONE , CONSOSCOPE = G_NONE ,CURRENCY = LC ,CATEGORY = ACTUAL )
This logic worked when the account has a figure, but in July 2014 in ECC the account had a transaction and the balance has become Zero. Until this account has a figure this pre acquisition logic is not working.
For making this work, I am trying to write a new logic to make the balance of this account as "1" in BPC through the script logic.
Kindly suggest me on the same.
Regards,
Shilpa

Retention Policy not working for OWA accounts

I have Exchange 2010 running, with 100% of users using OWA, not Outlook as their mail client.
I have one use that wants to have messages in all his folders deleted at the end of each day. Specifically, these folders are under the Inbox, but are subfolders in the Inbox, not the Inbox itself.
I set up a retention policy tag with the Tag Type "All other Folders in the Mailbox", with age limit for retention for 1 day, and the action to delete and allow recovery.
Then I applied the Retention policy just to that one users.
The next morning, all the messages from the day before were still there. Did I miss something in the setup?
Does the "1 day" retention delete messages after 24 hours of the message being there, or at the end of each day can I have it delete all the previous messages?
Does this have something to do with the fact that we are running OWA, not Outlook? I can right click on the folders and view retention policy...it just says "Use Parent Folder Policy"...nowhere can I find the parent folders policy.
Any advice would be appreciated.

Hi,
For your retention policy not working issue, we can try the following troubleshooting:
1. Please check whether it has Event ID 9017 and 9018, to make sure the MRM working well.
2. Please check the Managed Folder Assistant service is working well.
3. Please use MFCMAPI Tool to check the "PR_MESSAGE_DELIVERY_TIME" and "PR_CREATION_TIME" properties on the items that should be removed.
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support

IPhone emails not working for 2 accounts?

Hi all...
running an iPhone account thru our mail.domianname.com INCOMING email servers for one account is fine, ie you can just tap and emails are delv'd to the iPhone. Yet another account set up exactly same way on anothter iPhone for another user at that same domain (set them both up using exactly same config except for account name/pw) does not work. I continue to get a "can't connect to the server" notice...
can i ask (both are POP accts) why that might be? also, how can I change from a POP account to try the IMAP settings...
Jim

For the problem account, try deleting and recreating the account.
also, how can I change from a POP account to try the IMAP settings...
If the email account provider for the email account supports accessing the account as an IMAP account or as a POP account, you can't change the settings for an account from POP to IMAP after the account has been created as a POP account. You must delete and recreate the account choosing IMAP as the account type when prompted along with having the account settings for creating and accessing the account as an IMAP account.

Internet not working for limited accounts ....

My sister is a 30 year employee of "Big Blue". She recently purchased an iMac for her kids, and called me in a tizzy last night. We solved a number of small misconceptions, however, there is one major issue, I can't quite figure out.
She was having extremely slow internet speed. Compared settings etc to her PC's, and all was correctly setup. It sounded like a DNS timeout issue, and I found this link: http://technocrat.net/d/2008/8/23/48134
which indeed solved her slowness problem.
However, what's very strange, and I can't seem to find any solution online is that she made the internet settings changes to use the OpenDNS servers in her privileged account. Now, when she logs out, and logs back in into one of her children's accounts, there is no internet connectivity at all.
Safari immediately comes up with a a "server not found" error. Instantaneously.
Checking the network panel, all the settings made in her admin account are still set.
Any thoughts?
Thanks

Thanks for the response.
Actually the OpenDNS settings carried through, we did verify them in the Network panel, although we specifically did not attempt to re-enter the values, as they were in place.
Prior to the change to OpenDNS in the admin account, all accounts worked, although all of them worked slowly. I would have expected that if it were a matter of the settings not carrying over, that the other accounts would have continued to work, albeit slowly. Instead these accounts have stopped working completely.
I will, however, have my sister double check, and re-enter those values.
Ray

Keyboard shortcuts from Greek Input not working for my account only

I just upgraded to Leopard from Tiger 10.4.11 on my MBP 2.4 listed below. The Installer took care of everything, and after it was finished, my own account, the only Admin account, misbehaves when it comes to keyboard shortcuts in the Finder or any other app. To use the shortcuts, the Input flag must US English. If it's Greek, nothing works.
If I switch to the other two accounts on my Mac, one of which was carried over from the Tiger setup, the other I setup after the OS upg, both of which are Std accounts, not Admin, shortcuts work regardless of the keyboard input flag.
Tips, anyone?

That's alright, folks, problem solved:
Ran Leopard Cache Cleaner, and selected from Caches the third option (deep clean).
Thanks, anyway. Hope this may help some other poor sod.

Password will not work for Mac account

Hello,
When I'm using the Mail app, it won't recognize my @mac.com accounts password and I can't get my mail.
It is the same password I use to log on here, why doesn't it work?

why not delete the account in your mail app and add it again.
that way, you can add your new password when you re-enter your account in your mail app/program.
good luck.

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Mail receives OK but will not send for smtp account. Exchange server receives/sends OK

mail receives OK but will not send for smtp account. Exchange server receives/sends OK I'm away from home, using a family-member's wireless network that has always worked OK in the past. Today, the same problem occured while waiting in a hospital waiting lounge. Any ideas?

The outgoing mail server may be rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation.

Exchange 2013 OOF not working for migrated accounts

Similar Messages

Maybe you are looking for