Exchange 2013 PF. Add mark as reponsed when user change Category

Hello,
I have public folders with e-mail enabled adress.
When the user open the public folder in his Outlook 2007 & Outlook 2013, and change the Category, Exchange add a mark as this email is responsed.
This can be worse if the folder have an autoresponse added. The "from" remitent address will receive 2 autoresponses, one when he send the mail for first time, and another when WE change the category of his e-mail. 

Hi,
How did you set the auto-response feature? Is it an Outlook rule or Transport rule on Exchange?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Similar Messages

  • In base component when user change the serial number we need to set date time in Extra attribute filed

    HI Team,
    In ibase component when user change the serial number we need to set date time in Extra attribute filed..if we click edit ,User change serial number after save we need to set date time in  Extra Attribute 4 field .
    Component - PRDGENSET
    In this component there is no attributes,so where we need to implement and how to implement please help.
    Thanks
    kalpana

    Hi Abi,
    Thanks for your reply..see i debugged..i have put break point in method SET_S_STRUCT method if press enter in serial number ,debuggeris triggered..in SET_S_STRUCT method value getting serial number..so how to write the logic here...
    In GET_S_STRUCT method iam getting all attributes  but serial number is not filled..So could you please help here what to do..
    in set_S_STRCUT method value iam gettin serial number...in collection wrapper iam geting zrealtions if i open attributes_ref -if i pass Attribute value in run time its getting displayed.so how to write the logic based on serial  number please help some coding.
    Thanks
    kalpana

  • Found out when user change something

    Hi - Regarding our UI pattern button "Save" initially is disabled - and is activated only when user changes something in form view (change something in InputField or TextEdit UI)
    Is it possible in WD to find out this event?
    In InputField there is event OnEnter - but this not enough - user may pass the fields with TAB sequence and event is not triggered.

    Well, I guess it's impossible. You need some action to force propagating data from client to server. And in your case there is nothing -- focus traverse events are not supported.
    The only way is to enable "Save" action and skip unecessary updates in action handler.
    VS

  • Warning message should be raised when user changes Business Area in MIRO.

    Hello all,
    My requirement is,
    When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
    So is there any configuration to be done or so I need to write User Exit?
    Please explain in details like where to make these config settings and all.
    Thanks in advance.

    Hi Harshal,
    Make use of  EXIT_SAPLMRMP_010 in Enchancement LMR1M001  User exits in Logistics Invoice Verification.
    Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
    hope this helps.
    Regds,
    abhee

  • Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

    So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally.  Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
    works) which also starts locking users AD accounts out due to failed login attempts (somehow).  If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues.  Once Outlook has authenticated, I can
    turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
    Any ideas?

    Hi,
    According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
    If I misunderstand your concern, please do not hesitate to let me know.
    It’s normal. This caused by the difference between basic authentication and NTML authentication:
    Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
    but in all earlier versions, you will have to enter creds every time.
    NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
    at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • How to modify inputtext in af:query when user change another inputtext

    I have Jdev 11.1.1.3
    I'd like to change inputtext B (this contain a Date) when I change inputtext A (this contain a another Date).
    Those fields are inside af:query.
    I try to explain better.
    I have created the af:query and user before executing the query selects the start date in inputtext A when he/she comes out with tab, I would like to add one day to the inputext B.
    It's possible?
    For me, the complexity is that I can not manage the fields inside af:query
    Thanks

    Hi,
    there is no direct access to this. However, you should be able to get the input value to then set a new default value on the ADF BC model for the dependent attribute. After this you PPR the query component to show the new value.
    Sample 160 at http://blogs.oracle.com/smuenchadf/examples/ may be helpful
    Frank

  • Tigger event when user change iphone time

    It is possible, we can trigger event if user change date and time of iphone.

    Did you traced ICI, if any de-register events getting published when you close IE.

  • Problem when user change between fields in ALV

    Hi guys.
    The problem is: In ALV reports, EDIT mode, when I change between fields, the new field gets selected (the data get selected in blue or gry color), so I can write over new values. The problem is that some users when try to change to another field, the new field doesnt get selected, so he needs to select all the value and then write the new values. Is it clear?
    I checked with the user in another PC using his user in SAP and when she changes to another field, the new field gets selected. Then I checked in her PC doing the same, and when I moved to another field, the new field doesnt get selected, so i need to select myself and then write.
    In my PC I can change fields, tabbing, and the new fields get select, but in her PC i can't do that.
    Is it a problem of windows? or SAP logon?
    Does anybody know about this issue?
    Regards
    Miguel
    Edited by: Miguel Alvear on Oct 5, 2011 10:15 PM

    I would have checked her GUI version. Maybe she has another version than you !!

  • Exchange 2013 Give domain Admin access to all users inbox

    In the old 2007 exchange server we had domain admin access to everyones mailbox so we could open anyones email box using outlook client.
    But in 2013 exchange the mailbox delegation does not give us the option to add a "group" to the full access area, old allows to add a "user" who has a mailbox setup in exchange. I see there is Exchange Server group listed under Full Access
    , but it does not work added our domain Admin user to that group rebooted exchange and the test machine but did not work.
    Only option that works to allow mounting of xyz users mailbox via abc admin user is to actually add that abc admin user to the xyz mailbox under mailbox delegation > Full Access.
    Is  there a work around this, so we can simply have a group ABCD with user ABC or DEF etc. etc. so they can access everyones mailbox instead of going in and changing all users mailbox delegation one by one for the new user etc. ?

    Have you tried using the Exchange Management Shell?
    Get-Mailbox | Add-MailboxPermission -User Name_of_Group -AccessRights FullAccess -InheritanceType All
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
    I did i tried get-mailboxpermission and other than NT Authority and the end user the Deny was set to True for all inheritance rights. I tried your command, added user to the group i wanted under Enterprise OU in AD and restarted transport on exchange and
    logged in on the test machine again.
    Still no go, the user I am trying to add when using get-mailboxpermission shows up as Denied for fullaccess so is that overriding the group permissions ?
    RunspaceId      : 2xxxxxxx0
    AccessRights    : {FullAccess}
    Deny            : True
    InheritanceType : All
    User            : domain\abc
    Identity        : domain/Users/xyzuser
    IsInherited     : False
    IsValid         : True
    ObjectState     : Unchanged
    And for the group i just added with the above abc user inside it:
    RunspaceId      : 2xxxxxxxxx0
    AccessRights    : {FullAccess}
    Deny            : False
    InheritanceType : All
    User            : domain\newgroupadded
    Identity        : domain/Users/xyzuser
    IsInherited     : False
    IsValid         : True
    ObjectState     : Unchanged
    So is the users deny is causing this ? Not really sure why ABC domain admin/enterprise admin is the only one listed as no deny, there are other mailbox users that do not show up, I am assuming I have to create a new user a domain local user and that might
    work ? I wanted the Domain/Enterprise Manager/admin to have access so we would not have to keep toggling between users just to access someones inbox.
    Also further down the list of mailboxpermission i see the user abc (the user i want to add to the group to have access) is listed with Full access and Deny flag is set to False instead of True.
    So have two entries for user abc one with deny flag set to true and one with deny flag to false.
    AccessRights    : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
    Deny            : False
    InheritanceType : All

  • Exchange 2013 Database Size didn't reduction after user move another DB.

    Hi, I have two Exchange Server Ex01, Ex02 and two database DB1 and DB2. Already we move few user DB1 to DB2 but DB1 database size didn't reduction after move user. 
    Md. Ramin Hossain

    Hi ,
    If you delete or move a mailbox from a database will not create a free space on that database.Instead a white-space will be created on that database during the online defragmentation and that will not make any changes on the physical size of the database
    .Then that white-space will be used when a new mailbox is created on that same database.
    In case if you wanted to convert those white space to free space then you need to do an offline defragmentaion and that will make the physical change in the size of the database
    Note : For offline defragmentation we should have the database to be in a dismounted state.
    Command for offline defragmentation : 
    eseutil /d "path of the edb file"
    But my suggestion would be to move the mailboxes to the newly created database instead of doing the offline defragmentation to attain the free space .Because it would take too much of time for the large databases to get completed.
    Reference link for offline defragmentation : 
    http://exchangeserverpro.com/defrag-exchange-2010-mailbox-database/
    Command to see the white space on the mailbox database :
    ESEUTIL /MS "path of the edb file"
    To execute the above we need the database to be in a dismounted state.
    Reference Link : 
    https://social.technet.microsoft.com/Forums/office/en-US/4059c686-7c02-483b-9b15-891ca55295fe/running-the-eseutil-command-on-each-exchange-database-to-verify-database-whitespace?forum=exchangesvrgeneral
    Please reply me if anything is unclear.
    Thanks & Regards S.Nithyanandham

  • Making FieldA required when user changes value of FieldB

    Is this possible.
    When the user is filling out the form, the required state of fields needs to change based on input gathered from the user.
    FieldA - TextField
    FieldB - DDList - Values Yes and No
    FieldA should be required if the user sets FieldB to Yes, but it should be required if they set the value to No.

    I figured out how to change this, however I have one obstacle yet. The highlighting does not automatically refresh? I have to manually uncheck the required fields checkbox and reselectit for the highlighting to update.

  • Video restarts when users change the orientation of their device

    Is there any way of preventing a video from restarting (the video is a link to a youtube), if the orientation of the device is changed while watching the video?

    I think that´s something local, because I use some youtube videos with some fairly large videos and do not restart.

  • Duplicate Contacts when migrating mailboxes to exchange 2013 SP1 CU7

    Hello,
    We started to notice that when we move a user from our legacy exchange 2007 to exchange 2013, the contact list appears twice for users.  I heard CU6 was suppose to fix this issue but we went ahead and downloaded the latest version and we are still seeing
    this.  Can anyone provide guidance on how to stop this for the remaining migrations?
    Thanks

    Hi Joey,
    I'm back : )
    According to your description, I know that the contact list appears twice for users after moving users from Exchange 2007 to Exchange 2013.
    I notice that you want to install CU6 to fix this issue, based on my knowledge, CU6 can cause an known issue when you are using Exchange 2007 and 2013 coexistence and query mailbox move request via EMS. However is known issue has fixed in CU7, I suggest
    install CU7 for testing.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Exchange 2013 Users cannot access Public folder in Exchange 2007 SP3

    Dears,
    i am working in Upgrading Exchange 2007 to Exchange 2013 CU7,, I came to know with CU7 we have new way for coexistence with legacy Public Folder 
    https://technet.microsoft.com/en-us/library/dn690134(v=exchg.150).aspx
    i did the steps exactly as it is in the article,  but now users in Exchange 2013 always prompt for username /password when opening outlook and i found they still trying to connect to Exchange 2007 PF Server using HTTPS and failed..
    BTW, Outlook anywhere is disabled in EX2007 and as per this article Q/A , it is no more needed
    http://blogs.technet.com/b/exchange/archive/2014/11/07/on-premises-legacy-public-folder-coexistence-for-exchange-2013-cumulative-update-7-and-beyond.aspx
    the issue now, still users getting prompted and cannot connect to PF in EX2007,,
    your help is appreciated
    thanks
    Mufleh

    I ran into the same situation recently, and found out that you need to make sure InternalClientsRequireSSL is set to false.
    To verify: Run Get-OutlookAnywhere | fl Identity, *ssl
    If it is true, try setting it to false.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • How many CALs do i need? Server 2012 - Exchange 2013 - RDP

    Hi,
    (I apologize for the grammar and spelling mistakes, but im confident in the fact that the text is understandable. If not, please let me know. I have used UK English for spelling.)
    I did some research and read the following:
    (unable to post links, my email needs to be 'verified')
    And some MS pages regarding the CALs for Windows 2008 R2 (don't ask why).
    This is basically what i want to do:
    OS:                        
    Windows 2012 R2, possibly 2x because of the RDS role.
    Roles Server1:  Active Directory and Exchange 2013
    Roles Server2: File server and RDS
    Users:                 
    20
    PC’s:                    
    Approx. 15. Not sure about the exact numbers, but i am sure that there are more users than client pc’s.
    Users RDP:        
    Starting with 10 but eventually every user will be using RDP, so it might be also 20. The 10 we start with will not have the ability of logging into a client PC but RDP only.
    MS Software:    Outlook 2010 or 2013, depends on the support by MS.
    We are going to start with an AD with a home folder, roaming profiles and an email account. If everything go’s whell, we plan to start letting users connect tot heir workspace via RDP.
    I came to the following conclusion and need your input on this:
    20 User CALs, As far as i know, I need 1 user cal for an AD account and a RDP cal for
    one RDP account. Without a User CAL, i cant issue a RDP user cal, is this correct?
    20 RDP User CALs, does this mean that all my users can log into a RDS session via any client, even their own private pc?
    No Device calls, redundant?
    20 Exchange CALs, I am not sure about this one, the second link i found only mentions acces via web and mobile. I would also like to know if the Exchange CAL is per user or email. If it’s per user, then wat do i do with an email that is meant for multiple
    users?
    2 Server CALs, This is just buying 2012R2 isnt it? Does this also allow me to use one physically and the other as a VM in the physical one? Just asking, im not really going to use a VM.
    Hope you guys can help me out on this one, i didn’t expect the CALs would bet his complicated.

    Hi,
    Under Per User licensing, you need a license for each unique human that will access the software.  Based on what you have written above, below is a general description of the licenses you need:
    20 Per User Windows Server CALs
    20 Per User RDS CALs
    20 Per User Exchange Standard CALs
    1 Exchange Server 2013 Standard license
    2 Windows Server 2012 R2 Standard licenses
    Notes: 
    Each Server 2012 R2 Standard license allows you to install it on a physical server (up to 2 CPU sockets) with the Hyper-V role installed, and install it in 2 VMs.  The key here from a licensing perspective is the installation on the physical server
    is only being used for Hyper-V--if you use it for some other purpose (like AD, SQL, etc.) then you are only permitted to run 2012 R2 on 1 VM without an additional license.  Running your servers as VMs is the common and recommended method now, unless
    you have a specific reason not to.
    I listed two 2012 R2 licenses above because from your description I get the idea that you will have 2 physical servers.
    It is preferred to split key roles/functions onto separate VMs if possible.  For example, it would be preferred to have Exchange on its own VM(s).  This is obviously subject to your specific situation, budget, etc.  In smaller environments
    some roles will be combined in order to save money.
    I did not include licenses for Office in the list above.
    Yes, Per User licensing means the user can access the software from any device, even their own private pc.
    I recommend you purchase licenses through a MS volume licensing program that fits your needs.  Adding Software Assurance (SA) to your licenses will allow you to get the new versions when they are released as well as give some additional licensing rights.
    As always, it is essential to read the Product Use Rights (PUR) document, licensing agreements, terms and conditions, etc., as applicable to your licenses.
    I recommend you also take a look at the Office365 plans that include Office/Exchange/etc.  There are Exchange-only plans as well.  Depending on your needs it may be preferred to have your users access Exchange in the cloud and run RDS on premises. 
    Licensing Windows Server 2012 R2 Remote Desktop Services and Microsoft Desktop Applications for Use with RDS
    http://www.microsoft.com/licensing/about-licensing/briefs/winserv2012-rds.aspx
    Exchange Server 2013 licensing
    http://products.office.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview
    -TP

Maybe you are looking for