Tigger event when user change iphone time

It is possible, we can trigger event if user change date and time of iphone.

Did you traced ICI, if any de-register events getting published when you close IE.

Similar Messages

Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event?? It asks "for all events or only this event" if i change the time. But it changes ALL events when i try and switch calendars. Any help??

I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar. I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts". But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days. I want to change that in my calendar. When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event. no problem....just this single event. but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event. can anyone help with this??? am i doing something wrong? is there a way to do this or not with the new iCal program??? i used to do this and never had any problems. Thank you!

You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN

In base component when user change the serial number we need to set date time in Extra attribute filed

HI Team,
In ibase component when user change the serial number we need to set date time in Extra attribute filed..if we click edit ,User change serial number after save we need to set date time in Extra Attribute 4 field .
Component - PRDGENSET
In this component there is no attributes,so where we need to implement and how to implement please help.
Thanks
kalpana

Hi Abi,
Thanks for your reply..see i debugged..i have put break point in method SET_S_STRUCT method if press enter in serial number ,debuggeris triggered..in SET_S_STRUCT method value getting serial number..so how to write the logic here...
In GET_S_STRUCT method iam getting all attributes but serial number is not filled..So could you please help here what to do..
in set_S_STRCUT method value iam gettin serial number...in collection wrapper iam geting zrealtions if i open attributes_ref -if i pass Attribute value in run time its getting displayed.so how to write the logic based on serial number please help some coding.
Thanks
kalpana

APP-FND-01926 The Custom Event WHEN-LOGON-CHANGED...

Hi,
After compiling and placing a 'custom' CUSTOM.pll (and plx) file on the server, when logging into Applications receiving ERROR:
APP-FND-01926 The custom event WHEN-LOGON-CHANGED raising unhandled exception: User Defined exception.
This is for R12.1.3
The code was moved to the original base version of the R12 CUSTOM.pll file...
I read many other Notes on this error, but most refer to an error related to a Program Unit Not found and requiring a regeneration of the JAR files.
Would this be the same situation?
When we place the original back in place the forms login works.
Any ideas?
Thanks,
Lamonte

check ur CLASSPATH environment variable ur Custom.plx library should visible on runtime to Classpath variable.
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED ra

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Applied patch
6241631 11i.ATG_PF.H.delta.7 (RUP 7) and it's pre-requisite patches
Forms can not be launched successfully.
APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Followed
Note 391243.1: Unable to access forms - getting APP-FND-01926 error (Doc ID 391243.1)
Note 555409.1: Client Gets App-Fnd-01926 Every Time After Bounce Apps 11i Forms Service (Doc ID 555409.1)
these two notes, can not solve the issue.
Executed following action plans:
1. Backup custom.pll file on your issued instance(DEV instance).
2. Copy a custom.pll files from a working environments(i.e. PROD instance) to this issued instance(DEV instance).
3. Compile the new copied Library CUSTOM.pll manually by running the command:
f60gen module=CUSTOM.pll userid=APPS/APPS output_file=$AU_TOP/resource/CUSTOM.plx module_type=library batch=no compile_all=special4. The $FORMS60_PATH needs to be in sync with the the Context.xml specifically the s_f60path variable
i.e >/oracle/apps/test10appl/au/11.5.0/resource:/oracle/apps/test10appl/au/11.5.0/resource/stub</FORMS60_PATH>
5. Run Autoconfig instantiate the changes.
Issue still exists.
Please HELP~~
Thanks,
Jackie

Hello Srini,
app11i@hpfsapp2> ls -ltra CUSTOM
-rwxr-xr-x 1 app11i dba 24576 Aug 29 2001 TMCUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Mar 8 2006 CUSTOM.pll.backup
-rwxr-xr-x 1 app11i dba 24576 Feb 22 2007 CUSTOM.pll.20120215
-rwxr-xr-x 1 app11i dba 32768 Oct 4 2007 CHRM_CUSTOM.plx
-rw-r--r-- 1 app11i dba 36864 Oct 8 2007 CHRM_CUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Feb 14 15:20 TMCUSTOM.plx
-rw-r--r-- 1 app11i dba 24576 Feb 15 09:22 CUSTOM.pll
-rwxr-xr-x 1 app11i dba 16384 Feb 15 09:23 CUSTOM.plx
I don't quite understand "only one copy of CUSTOM.plx in the PATH directories", what is PATH directories? How to check? You mean environment variable?
EBS version: 11.5.10.2
DB version: 9.2.0.8
OS: Linux x86
Thanks,
Jackie

Found out when user change something

Hi - Regarding our UI pattern button "Save" initially is disabled - and is activated only when user changes something in form view (change something in InputField or TextEdit UI)
Is it possible in WD to find out this event?
In InputField there is event OnEnter - but this not enough - user may pass the fields with TAB sequence and event is not triggered.

Well, I guess it's impossible. You need some action to force propagating data from client to server. And in your case there is nothing -- focus traverse events are not supported.
The only way is to enable "Save" action and skip unecessary updates in action handler.
VS

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Raise event when user select a node or leaf of a recursive tree

What is the event when user choose a node or leaf of a recursive tree? When I select the tree node / leaf it does not raise the event in OnAction. Thanks!

Hi,
TreeNodeType and TreeItemType have ONACTION event assocaited with them. This event gets called when the node or leaf is selected by user. Put a break point in these method, then you'll call to know if they are actually getting called or not.

Warning message should be raised when user changes Business Area in MIRO.

Hello all,
My requirement is,
When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
So is there any configuration to be done or so I need to write User Exit?
Please explain in details like where to make these config settings and all.
Thanks in advance.

Hi Harshal,
Make use of EXIT_SAPLMRMP_010 in Enchancement LMR1M001 User exits in Logistics Invoice Verification.
Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
hope this helps.
Regds,
abhee

Best event when data changes via a user in a datagrid

How do I capture when data changes via a user in a datagrid?
change event?

thanks mate but I'm not sure where to put it:
<mx:AdvancedDataGridColumn headerText="sell" dataField="sell" textAlign="right" editable="true">
                <mx:itemEditor>
                    <fx:Component>
                    <s:MXAdvancedDataGridItemRenderer>
                        <s:TextInput width="100%" text="{data.sell}" fontWeight="bold" contentBackgroundColor="#eeeeff" color="#3333ff" textAlign="right" restrict=".0-9" maxChars="11">
                        </s:TextInput>
                    </s:MXAdvancedDataGridItemRenderer>
                    </fx:Component>
                </mx:itemEditor>
            </mx:AdvancedDataGridColumn>

Exchange 2013 PF. Add mark as reponsed when user change Category

Hello,
I have public folders with e-mail enabled adress.
When the user open the public folder in his Outlook 2007 & Outlook 2013, and change the Category, Exchange add a mark as this email is responsed.
This can be worse if the folder have an autoresponse added. The "from" remitent address will receive 2 autoresponses, one when he send the mail for first time, and another when WE change the category of his e-mail.

Hi,
How did you set the auto-response feature? Is it an Outlook rule or Transport rule on Exchange?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Dev2k and event when tabpage changed ?

Hi !
Does Dev2k 5.0 generate an event when you press or change a
tabpage? I haven't succeded in finding one yet, but perhaps
someone knows about it or know of a workaround ?
Also there is a trigger called ON-DISPATCH-EVENT !! Does anyone
know what you can do with this ? or what it does ?
Thanks,
Kenneth ([email protected])
null

When you click on a tab in forms 5 and greater, it first
when-tab-page-changed. Note that this trigger only first when a
users explicitly clickes on a tab. If the application allows you
to navigate to an item on a different tab page, the trigger does
not fire, but the tabs do change to reflect the current tab.
Also, there are two system variable that are helpful; they are
:system.tab_new_page and :system.tab_previous_page. For some
reason, the help system only includes references to the tab
trigger and system tab variables on the FIND tab of the help
search. The INDEX tab page of help does not list them.
Good luck.
Brian
Kenneth Breit Bedsted (guest) wrote:
: Hi !
: Does Dev2k 5.0 generate an event when you press or change a
: tabpage? I haven't succeded in finding one yet, but perhaps
: someone knows about it or know of a workaround ?
: Also there is a trigger called ON-DISPATCH-EVENT !! Does anyone
: know what you can do with this ? or what it does ?
: Thanks,
: Kenneth ([email protected])
null

Terminal App weird user change and time host

I've been changing between iTerm and the Terminal app. And this appears in both, so I'm a little confused. Every so often when my MacBook Pro has been on for so long, I open a new terminal, either app this still happens, and my user name disappears and my hostname changes to time. It's not consistent on when it decides to do this, I'm not sure what is going on. A reboot fixes it, but I'd like to know why it's happening in the first place. I've had this happen on my Mac Mini as well, and I've noticed it happening on Leopard, though I will admit, I wasn't using the terminal apps until Snow Leopard. Has anyone else come across this, and if so, any ideas on what is going on?
Thanks
Message was edited by: alucardbc

No opening a new terminal window doesn't fix it.
Just opened an iTerm and Terminal app window and they just did it. This is what it prints out:
Last login: Tue Mar 9 10:43:04 on ttys000
time:~ username$
Here is also the output of echo $PS1 when the prompt is wrong:
time:~ username$ echo $PS1
\h:\W \u\$
Here is the output with the correct hostname:
LilPro:~ username$ echo $PS1
\h:\W \u\$
They look exactly the same. Something is temporarily changing my hostname until I reboot.
Message was edited by: alucardbc
Message was edited by: alucardbc

How to modify inputtext in af:query when user change another inputtext

I have Jdev 11.1.1.3
I'd like to change inputtext B (this contain a Date) when I change inputtext A (this contain a another Date).
Those fields are inside af:query.
I try to explain better.
I have created the af:query and user before executing the query selects the start date in inputtext A when he/she comes out with tab, I would like to add one day to the inputext B.
It's possible?
For me, the complexity is that I can not manage the fields inside af:query
Thanks

Hi,
there is no direct access to this. However, you should be able to get the input value to then set a new default value on the ADF BC model for the dependent attribute. After this you PPR the query component to show the new value.
Sample 160 at http://blogs.oracle.com/smuenchadf/examples/ may be helpful
Frank

Problem when user change between fields in ALV

Hi guys.
The problem is: In ALV reports, EDIT mode, when I change between fields, the new field gets selected (the data get selected in blue or gry color), so I can write over new values. The problem is that some users when try to change to another field, the new field doesnt get selected, so he needs to select all the value and then write the new values. Is it clear?
I checked with the user in another PC using his user in SAP and when she changes to another field, the new field gets selected. Then I checked in her PC doing the same, and when I moved to another field, the new field doesnt get selected, so i need to select myself and then write.
In my PC I can change fields, tabbing, and the new fields get select, but in her PC i can't do that.
Is it a problem of windows? or SAP logon?
Does anybody know about this issue?
Regards
Miguel
Edited by: Miguel Alvear on Oct 5, 2011 10:15 PM

I would have checked her GUI version. Maybe she has another version than you !!

Tigger event when user change iphone time

Similar Messages

Maybe you are looking for