Exchange 2013 SP1 - Unable to test Mapi-over-HTTP Outlook Connectivity

I've configured MAPI over HTTP in my testing environment. It is working fine. But i'm unable to test this configuration using the Powershell Test-OutlookConnectivity CMDlet.
Outlook is working fine and is using MAPI over HTTP, so i'm pretty sure there are no configuration problems. But the CMD-let gives me the following output:
[PS] C:\Windows\system32>Test-OutlookConnectivity -RunFromServerId <myserver> -ProbeIdentity OutlookMapiHttpSelfTestProbe
WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for
invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id 241.
Failed to find the probe result for invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id
241.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], InvalidOperationException
    + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Exchange.Management.Tasks.TestOutlookConnecti
   vity
    + PSComputerName        : <fqdn of my serer>
Does anyone have a sollution for this?

Hello @all,
I got the same issue. The configuration is functional (Outlook connects over http). But the test-cmdlet raises this error. Is there any solution?
Greetings from Germany

Similar Messages

Exchange 2013-SP1/Outlook 2013 connectivity issue.

We couldn't make Outlook 2013 (latest updates) to connect to our Exchange 2013-SP1 through the Internet.
Any PC inside the LAN (on the domain or outside the domain) can connect normally.
Any PC outside the LAN (WAN) cannot connect, it keep showing this error:
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
OWA is working fine from the WAN, smartphones (Android & Apple) are also working fine from the WAN.
Port 443 is open on the firewall.
So what we are missing!

Hi,
Firstly, I'd like to say, in Exchange 2013 SP1, Outlook 2013 SP1 clients may use MAPI over HTTP to connect to the server.
Before going further, let's confirm if they use MAPI over HTTP: Get-OrganizationConfig | FL MapiHttpEnabled
If the value of the above property is true, I recommend the following troubleshooting:
1. Check if your Exchange 2013 SP1 server is running on Windows Server 2012 R2.
2. Check MAPI virtual directory settings: get-MapiVirtualDirectory |fl
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

ADFS-WAP-Exchange 2013 SP1

Hello guys,
i will setup a new infrastructure with exchange 2013 account forest.In this new forest, users will authenticate by WAP and ADFS.
The accounts user are in other with a exchange 2003 that i'll migrate.
My question is how adfs will authenticate owa's user and do i need to setup a adfs server in account forest ?
Concerning my adfs certificate, do i need to put the UPN from the exchange forest or to put also the account forest
Thanks for you advice
Jérôme

Hi,
I find 2 related blog for your reference, hope they are what you want:
Setting up Windows Application Proxy for Exchange 2013
http://blogs.technet.com/b/jrosen/archive/2013/12/28/setting-up-windows-application-proxy-for-exchange-2013.aspx
Configuring Exchange 2013 SP1 to Accept AD FS Claims
http://blogs.technet.com/b/platformspfe/archive/2014/03/12/configuring-exchange-2013-sp1-to-accept-ad-fs-claims.aspx
Thanks
Mavis Huang
TechNet Community Support

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

Exchange 2013 SP1 setup fails at prerequisite Analysis

I installed a completely new server network with Hyper-v 2012R2
I installed two virtual 2012R2 servers: DC01 as the Domain Controller of "testdomain.local" and EX01 as the Exchange server.
EX01 is joined the domain "testdomain" from DC01
I log in on EX01 with an in AD created testdomain\exadmin account who is member of domain admins, enterprise admins, schema admins, administrators and group policy creator owners.
I have run the command Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience,
NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing,
Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression,
Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation, Telnet-Client, RSAT-ADDS
on EX01
I have installed the Microsoft Unified Communications Managed API 4.0
Then I run the Exchange 2013 SP1 setup and the prerequisite check gives the following errors:
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Active Directory server is not available. Error message: Active directory response: The LDAP server is unavailable. See the Exchange setup log for more information on this
error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
I can connect with the Active Directory Sites and Domains and other applets to the AD. So Why these errors???
HELP!
Regards, Manu
Manu van Winkel

Hi, thanks for the answer.
I restarted the server and did the "run as administrator": same result.
The first errormessage in the exchangesetup.log is:
[ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server is not available. Error message: Active directory response: The LDAP server is unavailable. See the Exchange setup log for more information
on this error.
When I run dcdiag /s:DC01 from EX01 it passes all tests except:
DFSREvent "The RPC server is unavailable"
KccEvent "The RPC server is unavailable."
SystemLog "The RPC server is unavailable."
Could these be of any influence?
Running dcdiag on DC01 passes all tests.
The only thing I changed after setting up DC01, was changing the fixed IP-adres from 192.168.25.3 to 192.168.25.2, but I ran ipconfig /flushdns and ipconfig /registerdns and dcdiag /fix afterwards.
The only roles installed on DC01 are AD DS (I tried installing exchange before and after adding the AD DS role), AD, DNS, DHCP and Fileservices
I don't know where to look anymore....
Manu van Winkel

Exchange 2013 SP1 | Another HTTP 500.0.0 Error

Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...

Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2013 SP1 users not receiving quota warning email message

Hi,
We are on Exchange 2013 SP1 and Exchange 2010 SP3 co-existence mode and currently migrating users from Exchange 2010 to 2013. We have noticed that users are not receiving email message when their mailbox quota warning when its near to maximum limit.
If I log in via OWA it shows the notification (Pop up) that your mailbox is almost full but no message received in email. Most of the users do not log into OWA but only uses Outlook.
It looks like other people are also seeing this similar issue but I am unable to find any solution for it.
How users will know if their mailbox is almost full if they are traveling and only using Mobile phone for emails to send and receive.
Thanks,
Raman

Hi Thanks for your response. Our Quota is set on Database level. I am seeing these event ids as well.
Log Name: Application Source: MSExchangeIS Date: 12/31/2014 10:07:12 PM Event ID: 1077 Task Category: MAPI Level: Warning Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f on database
326f0997-4fe5-4b31-873b-6a3396e7a91c is approaching its storage limit. A notification has been sent to the user. This warning will not be sent again for at least twenty four hours.
========================
Log Name: Application Source: MSExchange Store Driver Submission Date: 12/31/2014 10:07:12 PM Event ID: 1012 Task Category: MSExchangeStoreDriverSubmission Level: Error Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The store
driver failed to submit event 8237691 mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f MDB 326f0997-4fe5-4b31-873b-6a3396e7a91c and couldn't generate an NDR due to exception Microsoft.Exchange.MailboxTransport.StoreDriverCommon.InvalidSenderException at Microsoft.Exchange.MailboxTransport.Shared.SubmissionItem.SubmissionItemUtils.CopySenderTo(SubmissionItemBase
submissionItem, TransportMailItem message) at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.GenerateNdrMailItem() at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.<>c__DisplayClass1.<SubmitNdrForFailedSubmission>b__0()
at Microsoft.Exchange.MailboxTransport.StoreDriverCommon.StorageExceptionHandler.RunUnderTableBasedExceptionHandler(IMessageConverter converter, StoreDriverDelegate workerFunction).
Raman

BSOD after upgrading to exchange 2013 SP1

Hi,
I Have 4 servers, x2 Mailbox and x2 CAS, all with 2008 r2 OS, Mailboxes with DAG. Problem started after I upgraded all servers from Exchange 2013 CU3 to Ex13 SP1. All Servers are in Vmware, same hardware.
All servers getting BSOD, error is same as some other posts in Internet about:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8007ab4890, Terminating object
Arg3: fffffa8007ab4b70, Process image file name
Arg4: fffff800019de7b0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8007ab4890
IMAGE_NAME: wininit.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: wininit
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: MSExchangeHMWo
BUGCHECK_STR: 0xF4_MSExchangeHMWo
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff80001a67ab2 to fffff800016d9bc0
LOGS:
RecoveryActionLogs: ForceReboot-ServerName -ActiveDirectoryConnectivityServerReboot: Throttling rejected the operation
RecoveryActionLogs: ForceReboot-ServerName -ActiveDirectoryConnectivityConfigDCServerReboot: Throttling
rejected the operation
Recovery Action Failed. (ActionId=RestartService, ResourceName=ServerName.contoso.com, Requester=ActiveDirectoryConnectivityRestart,
InstanceId=140408.062707.65292.001, ActualStartTime=2014-04-08T15:27:07.6529270Z, ActualEndTime=2014-04-08T15:27:07.7777262Z, ErrorMessage=Service ServerName.contoso.com was not found on computer '.'.)
when Server restarts, logs show
Bugcheck action reported by server 'ServerName' initiated by responder 'ActiveDirectoryConnectivityServerReboot'
Recovery Action Started. (ActionId=ForceReboot, ResourceName=ServerName, Requester=ActiveDirectoryConnectivityServerReboot, InstanceId=140408.063307.93261.004, ExpectedToFinishAt=2014-04-08T15:38:07.9326175Z
Recovery Action Succeeded. (ActionId=ForceReboot, ResourceName=ServerName, Requester=ActiveDirectoryConnectivityServerReboot, InstanceId=140408.063307.93261.004, ActualStartTime=2014-04-08T15:33:07.9326175Z, ActualEndTime=2014-04-08T15:35:07.0828500Z)
I found that it could restart like many times in a day, but
Throttling does not let it, just one restart per day.
I already spent four days trying to find problem but no luck.
Try'ed to add override
Add-GlobalMonitoringOverride
-Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
but
after
(Get-WinEvent
-LogName Microsoft-Exchange-ActiveMonitoring/responderdefinition | % {[XML]$_.toXml()}).event.userData.eventXml | ?{$_.Name -like “ActiveDirectoryConnectivityConfigDCServerReboot"} | ft name,enabled
still shows propertyValue 1, and servers are restarting no matter what, I just dont want to disable HealtManager
Service.
Try'ed to recreate all performance counters, did'nt worked
Try'ed to create prefered domain controller, did'nt worked
Try'ed to play with healthSet 'AD', but there is almost no information about it in TechNet, so I just looked which services are unhealthy, sometimes it shows ActiveDirectoryConnectivityServer
or ActiveDirectoryConnectivityConfigDCServer as unhealthy, but after few minutes it goes to
healthy, problem that Exchange could already restart the server
mainly reason I think is:
The AD Health Set has detected a problem with Server.contoso.com at 2014.04.09 06:33:11. The Health Manager is reporting that ActiveDirectoryConnectivityProbe/Server.contoso.com
Failed with Error message: Search took 1518 ms. Threshold 800 ms. Attempts to auto-recover from this condition have failed and requires Administrator attention. Exception Details: System.Exception: Search took 1518 ms. Threshold 800 ms
I really need some new ideas...
EDIT: Exchange 2013 sp1 works perfectly in test lab, there are cloned machines from production, the only difference is DomainController, there is just one (server), no replications, and no subdomains (production domain have subdomain).
Running DCDiag shows no errors

Hello Everyone,
We have 2 CAS and 4 Mailbox server that were installed from SP1 and seeing the same issue. This is a clean install still with no mailboxes migrated over as of yet. Opened a case with MS. also ran:
Add-GlobalMonitoringOverride
-Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
Waiting
for MS to get back and to see how this workaround does. Seems like the original issue was not resolved completely?
Will
post back when we get an update. Changing the DirectoryActiveMonitoringContext.xml and the above workaround do not seem suitable for us. We would like to see a complete resolution for this.
Good
luck!

Outlook 2013 can't connect to Exchange 2013 SP1

Hello,
I've already asked that question on Exchange 2013, now I'd like to ask it again in regard to Exchange 2013 SP1.
The question i s very easy: suppose I have just installed Exchange 2013 SP1 (in a Win2012 R2 domain) with three mailboxes (user1, user2, user3). I can successfully run ecp and owa for all users...
...but when I'm starting Outlook 2013 and trying to set up a profile manually, for example, [email protected], Exchange 2013 Sp1 keeps saying "Outlook can't log on...The name cannot be resolved."
In Exchange 2013 this could be fixed by adding the server's ip address to its Hosts file, but I thought it was a bug and it would be corrected later or sooner... Now the same problem with Exchange 2013SP1...
Would anybody please tell me is there anything special I must do to connect to Exchange 2013SP1 via Outlook 2013 (not Outlook 2013SP1 - without MAPI over HTTP)??? If yes what articles can I read about it?
Thank you in advance,
Michael

Hi,
When we automatically configure the account, Autodiscover service will help Outlook find the new type and we don't need to run the command to get the mailbox GUID until we manually configure the profile.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb124251(v=exchg.150).aspx
"Through the Autodiscover service, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address."
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

GSSAPI with IMAP on Exchange 2013 SP1

We are setting up Exchange 2013 SP1 in our Exchange 2010 test environment to verify our upcoming migration. I have found out that for some reason I can't get the IMAP service in Exchange 2013 to work with Kerberos (GSSAPI) authentication with Thunderbird
as a client. It does work fine in Exchange 2010 SP3 though.
Exchange 2010 SP3 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
Exchange 2013 SP1 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
AUTH=GSSAPI is missing and therefore I can't blame Thunderbird from complaining about this. If I compare the output from Get-ImapSettings I can't find anything that would indicate why I shouldn't work. EnableGSSAPIAndNTLMAuth is $true on both server
and LoginType is SecureLogin.
On
http://technet.microsoft.com/en-us/library/jj619283(v=exchg.150).aspx I found out that NTLM is not supported on Exchange 2013 for POP3 and IMAP4 but Kerberos (GSSAPI) and Plain Text Authentication with SSL still is.
Has anyone got IMAP to work with Kerberos authentication on Exchange 2013 SP1?

Hello,
According to your description, we are unable to see the AUTH=GSSAPI in Exchange 2013.
My environment is Exchange 2013 CU1. I get the same result as yours. Looks Like Exchange 2013 IMAP does not support GSSAPI as authentication mechanism.
Cara Chen
TechNet Community Support

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+    New-PerfCounters -DefinitionFileName $f
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation

Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.A

Hi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them.

Exchange 2013 SP1 and SCOM 2012 R2

Hi there,
Hopefully someone can assist me with this issue, if it is one...
I am halfway through an Exchange migration, from Exchange 2010 SP3 on Server 2008 R2 to Exchange 2013 SP1 on Server 2012 R2.
76 users in total, roughly 80GB of Public Folders.
I have configured the 2013 environment with a cross datacenter DAG, also increased all of the timeouts of the cluster to take this into consideration, and everything appears to function as expected.
Added both 2013 machines to SCOM 2012 R2 for at least a week with no active users on it, and all monitoring reported ok, no issues.
Exchange 2010 is configured to use webmail.company.com for RPC over HTTP, which is what I have configured 2013 to use as well.
Implemented Microsoft ARR for client access to Exchange 2013, as opposed to ISA we've used for Exchange 2010.
A week ago, changed the DNS records for webmail.company.com from ISA to ARR, and all clients connected perfect.
Thought, ok, now we can start the migration. So far everything "seems" to be going perfect with the mailbox moves, however, SCOM is really noisy.
Attempted to reran the probe for EWS and got the error below:
Is there perhaps anyone that can assist me with these errors?
Cheers

FYI... IIS ARR is not supported for Exchange Server.
Check in event log if you are getting anything related to the issue.
About Outlook POP UP to end users. Check the event log on 2010/2013 for MRS events.
Are those mailboxes still moving or in move request?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 SP1 and CUCM 9.1.2 - Exch not recognizing called extension

I think I'm almost there in getting Exchange 2013 SP1 UM working with CUCM 9.1.2...I've got two issues at the moment that I need a little help with.
1) When I dial my VM pilot (6040) from a UM enabled extension it prompts to enter an extension. When I dial the same extension and let it ring to VM, Exchange picks up and says "the person you are trying to reach does not have a valid voice mail box
on our system".
2) This just started happening this afternoon, when I dial my VM pilot (6040) exch3 picks up as thats what I have my route pattern pointing to. If I enter the extension of a mailbox on exch2, I get stuck in a endless loop.
I've followed this post as a guide but it hasn't resolved my issue.
https://supportforums.cisco.com/discussion/11914031/exchange-2013-um-and-cucm-86
My Exchange environment looks like this:
Site 1:
exch1 - CAS/Mailbox, used for mainly utility type work, journal, dedicated SMTP flows etc
exch2 - CAS/Mailbox, part DAG13
exch3 - CAS/Mailbox, part of DAG13
Site 2:
exch2dr - CAS/Mailbox, part of DAG13
exch3dr - CAS/Mailbox, part of DAG13
DAG13 is stretched between two sites, there are no users at our DR site so CUCM is pointing to Site 1 for UM. Each site has an internet facing CAS-only server for OWA/EAS etc.
Any help is greatly appreciated. I'd love to get rid of Unity.
EDIT:
I just found this event in the event logs:
The Microsoft Exchange Unified Messaging service on the Mailbox server received a diverted call with ID "d51600-3a3140c5-9b8-c1414ac@EXCH3-IPADDR" for extension "4099" on UM dial plan "CUCM" from UM IP gateway "CUCM IP",
but no UM-enabled mailbox for the corresponding extension could be found. Please check the extension and make sure that the corresponding mailbox is enabled for UM and associated with the correct UM dial plan.

9.1.2 I think it is, we upgraded to avoid the known DNS bug
I cant see how to PM you either
The crux of it was outlined below with some tweaks
http://blogs.technet.com/b/canitpro/archive/2014/04/30/step-by-step-integration-between-exchange-2013-um-and-cisco-unified-communication-manager.aspx
As we have multiple combined role servers, our trunks are set up as follows:
1. 1 x CAS Trunk - contains all CAS Servers on port 5060
2. 4 x MBX Trunks - contains Maibox Server with ports 5062-5068
On top of that, we had to Allow "Redirecting Diversion Header Delivery - Inbound (and Outbound)" on the CAS Trunk but DISABLE it on the Mailbox Trunks
Also, make sure that you are using Telephone Extension Dial plans in Exchange 2013 (Despite them being unable to be associated with a 13 Server - EX13 answers for all calls anyway)
Lastly, the MS documentation is a little strange - it says that as your last step of UM migration, you should point your Call Manager to 2013 - I don't agree with that statement, EX13 routes calls back to 2010 UM Servers perfectly fine, so treat it the same
as any other CAS based service - point to 2013, and it will handle the rest

Exchange 2013 sp1 smtp NTLM auth for child domain users

i have exchange organization with exchange 2007 sp 3 & exchange 2013 sp1.
there are all users in Exchange 2013 server (mail flow is through Exchange 2013 server)
i have single forest, 2 site (site1, site2), root domain root.local and 1 child domain ch.root.local
DC for child domain is located in site2 (dc.ch.root.local)
multirole exchange 2013 server is installed in root domain.
i am traing to configure smtp receive connector with NTLM auth and have one problem.
when user in child domain try send email through this receive connector i see in log
<,AUTH NTLM,
>,334 <authentication response>,
*,SMTPSubmit SMTPAcceptAnyRecipient BypassAntiSpam AcceptRoutingHeaders,Set Session Permissions
*,CH\user1,authenticated
*,,Setting up client proxy session failed with error: 535 5.7.3 Unable to proxy authenticated session because either the backend does not support it or failed to resolve the user
*,,"Setting up client proxy session failed with error: 451 4.4.0 Primary target IP address responded with: ""535 5.7.3 Unable to proxy authenticated session because either
the backend does not support it or failed to resolve the user."" Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 192.168.1.15:465"
but authentication is succesfull for users from root domain.
why do it can be?
Thanks.

thanks for link
at smtp receive logs (Hub transport role) i've found the next:
Client Proxy EXMAIL2013,08D134DAF6CE1C51,49,192.168.1.15:465,
*,NT AUTHORITY\SYSTEM,authenticated
>,235 <authentication response>,
<,XPROXY SID=08D130D354F520D1 IP=192.168.1.21 PORT=57085 DOMAIN=[192.168.1.21] CAPABILITIES=0 SECID=Uy0xxx...
*,,Error while looking up SamAccountName chuser: The user name or password is incorrect.\r\n
*,None,Set Session Permissions
>,250 XProxy accepted but user identity could not be obtained,

Exchange 2013 SP1 - Unable to test Mapi-over-HTTP Outlook Connectivity

Similar Messages

Maybe you are looking for