Exchange Converts embedded link to http when Sending to External Recipients

Hello:
We use a product called ProjectWise internally. One of the features is to embed the link to a ProjectWise document in the body of an e-mail and send it to other users. When ProjectWise embeds the link, it is in the format:
pw://path_to_file
Obviously, this is very similar to the http format. The pw:// link allows the file to be opened natively in the ProjectWise software.
Here's the issue:
When sending to other INTERNAL users, the link flows through correctly. However, when it is sent to an EXTERNAL user, the link is converted from pw:// to http:// and is useless.
We can even send the same email to both Internal and External users, the Internal users receive correctly, the External users receive the converted link.
I am thinking that Exchange is somehow modifying the link when sending to external, but I can't find anything on it.
Thanks,
Tim

Hi Tim,
Base on my knowledge, by default, exchange system does not modify the content of the email, except you create some transport rule.
Do external user use exchange ? or any other email system?
In addition, the format of "pw://" is only useful for internal, when you open the "pw://" link from internet, Browse may automatically converted the link to "http://".
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

Exchange Time Zone is not correct when sending a meeting request

Hello,
Please we are facing a problem after we installed (Egypt Ramadan DST changes2014 ) hot fix,
http://support.microsoft.com/kb/2967990
Our servers and computers timezone updated successfully, but when we schedule any meeting from outlook with any user in any different time zone, the attendee receives the meeting request with delay one hour as the below Example:
Example:
Time for the meeting: 1:00 P.M. Cairo time zone
Attendee receives the meeting request: 2:00 P.M.
Would you please help us in this issue.
Thanks

Hi,
It seems some caches issues. I suggest we firstly try scheduling a downtime to reboot the Exchange Server to refresh the settings.
In addition, I’d like to ask whether the DCs are reboot?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

How to Convert Report into Excel Sheet when Sending Mail.

Dear Friends,
i want to send mail to HOD of Product with an Excel Sheet .
i want to send Pending Issue details to HOD in Excel Sheet attachment .
here i have pending issue report now i need to send it in Excel Sheet attachment .
i have table where i have manage Product ID and HOD OF PRODUCT.
CREATE TABLE "MAP_USER_PRODUCT_DTL"
   (     "ID" NUMBER NOT NULL ENABLE,
     "PRODUCT_ID"NUMBER,
     "USER_ID" VARCHAR2(5) NOT NULL ENABLE,
     "HOD_PROD" VARCHAR2(100)========================================Value is Y OR N IF HOD then Y else N
     CONSTRAINT "MAP_USER_PRODUCT_DTL_PK" PRIMARY KEY ("ID") ENABLE
/i have one more table where all complete issue detail insert.
CREATE TABLE "CRM_ISSUE_PROBLEM"
   (     "ID" NUMBER,
     "SUBJECT" VARCHAR2(255) NOT NULL ENABLE,
     "CLIENT_ID" NUMBER,
     "ASSIGNED_TO_ID" VARCHAR2(100),
     "ASSIGNED_ON" DATE,
     "DESCRIPTION" VARCHAR2(4000),
     "PRODUCT_ID" NUMBER NOT NULL ENABLE,
     "STATUS_ID" NUMBER NOT NULL ENABLE,
      CONSTRAINT "CRM_ISSUE_PROBLEM_PK" PRIMARY KEY ("ID") ENABLE
Here STATUS_ID is Like Pending ISsue,Open Issue and Close Issue .i want to send mail to HOD with Pending Issue Report convert into Excel Sheet and send to HOD?
How can i do this.
Thanks
Edited by: Vedant on Oct 12, 2011 12:36 AM
Edited by: Vedant on Oct 12, 2011 2:22 AM

Hello Vedant,
Would it suffice if you send a CSV file?
If yes, then see following code.. run the code under APEX > Home > SQL Workshop > SQL Commands
DECLARE
        ln_id NUMBER;
        lc_clob CLOB;
     lb_blob BLOB;
     li_in PLS_INTEGER := 1;
     li_out PLS_INTEGER := 1;
     li_lang PLS_INTEGER := 0;
     li_warning PLS_INTEGER := 0;
     lv_mail_rcpts VARCHAR2(2000) := '[email protected]';
     lv_mail_from VARCHAR2(100) := '[email protected]';
       lv_clmn_separator VARCHAR2(1) := ',';
BEGIN
     -- Build file content as CLOB
-- Replace with your query
     FOR i IN (select object_id A, object_name B, object_type C, status D, temporary E, generated F, secondary G,namespace H from user_objects where rownum < 10)
     LOOP
    IF lc_clob IS NULL THEN
      lc_clob := i.A||lv_clmn_separator||i.B||lv_clmn_separator||i.C||lv_clmn_separator||i.D||lv_clmn_separator||i.E||lv_clmn_separator||i.F||lv_clmn_separator||i.G||lv_clmn_separator||i.H;
    ELSE
      lc_clob := lc_clob||CHR(10)||i.A||lv_clmn_separator||i.B||lv_clmn_separator||i.C||lv_clmn_separator||i.D||lv_clmn_separator||i.E||lv_clmn_separator||i.F||lv_clmn_separator||i.G||lv_clmn_separator||i.H;
    END IF;
     END LOOP;
     -- Convert CLOB to BLOB
     DBMS_LOB.CREATETEMPORARY(lb_blob,TRUE);
     DBMS_LOB.convertToBlob(lb_blob,lc_clob,DBMS_LOB.LOBMAXSIZE,li_in,li_out,DBMS_LOB.DEFAULT_CSID,li_lang,li_warning);
     -- Send mail
     ln_id:= APEX_MAIL.SEND(
       p_to        => lv_mail_rcpts,
             p_from      => lv_mail_from,
             p_subj      => 'Subject Goes here',
             p_body      => 'Body goes here'
     -- add CSV file as attachment
     APEX_MAIL.ADD_ATTACHMENT
       p_mail_id   => ln_id,
       p_attachment => lb_blob,
       p_filename   => 'filename.csv',
       p_mime_type => 'application/csv'
-- push mail queue
APEX_MAIL.PUSH_QUEUE;
     -- empty temporary space
     DBMS_LOB.FREETEMPORARY ( lob_loc => lb_blob);
     COMMIT;
END;Regards,
Hari

Ics download of iCloud invitations ends in a not found exception when sending to external accounts (e.g. gmail)

When I send a calender event from my iCloud account to an external account (e.g. gmail), the recipient got the following error:
When clicking "accept" in the invitation mail, a icloud.com website will open. The "download ics file" (to import the event) on this site results in a "not found" error page. This behavior is new since some days.
Does anyone have a idea how this problem could be solved?
Thank you!

That's a solution to a different problem.
The problem is that people are receiving invites to their email address.
And then when they click the link in that email to download and open the ics file with the update,
there's no download and you get an error message "iCloud can't find that page".
This happens to me using apples own email infrastructure, and is not (AFAIK) connected to gmail at all.

Email stuck in Outbox when sending to multiple recipients.

I am using Outlook 2010. When I forward an email to multiple recipients it gets stuck in the Outbox. I have reduced the number of recipients and the same email will sale on through. I am getting an error code 0X8DE00006 and MS disavows
any knowledge of it. Is there a cure or do I have to send the forward email several times to small groups?

Hi,
From your description, I recommend you check if you limit the number of recipients you can have on an email.
If yes, please increase the value and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

UWL object link missing parameters when jump to external page via portal

We configured SWFVISU in ECC to jump out to an external application via a portal page. Our resultant URL looks like this:
http://XYZ:50000/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fcom.xyz.portal.frameworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.xyz.pct.xyz%2Fcom.xyz.pct.rols.func_Sales_Representative1%2Fcom.xyz.pct.wrks.s.func_Sales%2Fcom.xyz.pct.pgs.func_Order_Accounts_OA&uname=USER.CORP_LDAP.mdeklerk&langu=EN
BUT the work item object link parameter i.e. Sales Order No. does not get passed/attached to the string. What are we missing?

It is passed as an implicit UWL parameter and will not be displayed in URL. You can read this parameter from webdynpro application.

Message error when sending to multiple recipients/contacts

Ever since 3.0 I can't send messages to multiple recipients. I'm on Optus in Australia using a 16gb 3G.
Anyone else having this problem?
Any fixes?

Actually, just for an update, if I turn off MMS I can send to multiple contacts. But with MMS on, I can't. Am I the only person having this issue?
I've tried a restore, and set-up as new phone. But still having no success.

When sending an email how do I set the address when sending to multiple recipients so that each recipient only sees his or hers address and not everyone else

I would like so send emails to multiple addresses yet I want each recipient to only see his or her address

This question isn't related to Mozilla Firefox. However, I can still answer your question. In the 'to' field, put your own e-mail address and put each recipient's address in the BCC field. This way the only address seen is your own.
Please try to post in the appropriate forum next time. (Thunderbird, Gmail, etc.)

Use ";" as email delimiter when sending to multiple recipients

Hello out there. We currently have a Banner system in place that allows faculty to do a mass email to their classes. The only catch is that they use a semicolon as the delimiter between email addresses and Apple Mail doesn't seem to recognize this.
Can anyone help me find a way to enable the use of the semi-colon as a delimiter?
Thanks.

Perhaps I could be barking up the wrong tree here,
but I'm pretty sure that separating email addresses
with a ";" has been a long supported feature in a lot
of different Mail clients over the years. If
anything, I've had nothing but trouble with using ","
as a delimiter.
Well, Mail won't do it obviously, and I tested a couple different web mail clients that also won't recognize a ';'. I also looked at the RFC that defines the format for e-mail, and although I'm not particularly good at reading those documents, it does seem to say that the ',' is the appropriate delimiter between recipients.
However, they use a ";" delimiter
as Outlook and Entourage do not respect "," correctly
without tweaking.
I find that surprising, as I've used all manner of methods for accessing e-mail over the years -- everything from extremely simple Unix mail readers to clients like PowerMail, MailSmith, Eudora and Mail to web mail interfaces -- and in all the interfaces that I have used, the comma is the appropriate delimiter. If Outlook and Entourage truly don't do the comma without extra work, I have only one explanation: Microsoft.
So - is there some way to add another delimiter that
Mail will recognize in email lists (in the To: Cc: or
Bcc: box)?
I assume this is something you want automated, and I also am assuming that Banner is producing the lists of addresses. How do they get from Banner to Mail? If you could insert an AppleScript in that process somehow for your Mac users, you could automatically replace all ';' characters with ','.

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Mail is not giving from information when sending emails

Having issues when sending email to recipients, it does notgive my info. in the from section.

Nope, i can send individual emails ; however, my information(from:) is not being shown. So individuals recieve email from me without my information, and could be considered as spam.

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Error 554-5.6.0 Corrupt message content... when sending emails to other users on same exchange server

Hello
I have a very strange problem at a customer from our company.
The problem happens to only one user on the Exchange 2010 organization (SP3, no additional patches installed, Server is 2008 r2).
When this specific user sends an email to one or more users on the same Exchange organization, he gets sometimes (not always) the following error back:
554-5.6.0 Corrupt message content 554 5.6.0 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. ConversionFailedException:
Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. [Stage: CreateReplay]
So - TNEF, corrupt message Content... I googled the error and checked all the recommended Solutions. The Outlook Client is ok, I have doublechecked it and everything is configured like it has to be.
The Problems happens as above described only for one user when he writes emails to users from one specific Domain on the same Exchange organization (example
[email protected]).
He has this specific contacts in a SharePoint contact list which is connected to his Outlook Client.
Thanks for any help or Information!
Regards

Hi,
According to your description, I understand that one user cannot send message with error “554-5.6.0 Corrupt message content 554 5.6.0”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether it works or not when send message to external address, how about the OWA?
It seems that message has corrupt content. Is there any 3rd prevent software or Anti-Virus software in Exchange 2010?
Regarding this issue, firstly I would like to explain that content conversion occurs in two places, that are the Store Driver and the Content Conversion stage of Categorization. Since the issue exists in the delivery mail of internal user, the agent that was
used in the process of handling by Store Driver may cause this issue.
Please try to enable pipeline tracing and content conversion tracing to get more details about this error, for your reference:
Content conversion tracing:
http://technet.microsoft.com/en-us/library/bb397226.aspx
Pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125018.aspx
Best Regards,
Allen Wang

Could not initialize the browser's security component Error message when sending a link

Using Ubuntu 9.10 64 bit. Firefox version is 3.6.3 and Thunderbird version is 2.0.0.24
When sending a link with Firefox I get an error message "Could not initialize the browser's security component...". Tried deleting the cert8.db and secmod.db. Noticed if Thunderbird is already open I don't get the error message. But if Thunderbird is closed then opens to send the link I get that error message. Seems the security certificates aren't being passed to Thunderbird when it is opening up.
== This happened ==
Not sure how often
== 2 days ago.

Try to remove or rename the secmod.db (secmod.db.old) file in the Firefox Profile Folder.
If that didn't help then remove or rename cert8.db (cert8.db.old) as well.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
* C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders

How can I send a ThinkLink image with all the embedded links in Thunderword Email?

As you are aware, ThinkLink images have embedded links (word files, images, videos etc.). I am, however, not able to send these images through Thunderword emails. I have tried both Inset Image and Insert HTML but nothing works. Of course, I can understand that ThinkLink is a new concept and most of the email clients don't support it.
Thanks,

No I am not aware. I have now googled thinklink, joined their site and found that they do not create images. Only Javascript.
So no email client such as Thunderbird, which does not allow javascript, or any person disabling it in their browser for security reasons, will see your interactive images because they are not images they are interactive programs written in Javascript.
Now how to get unsubscribed from these folk, they already tried spamming my whole Google Plusfriends list.

Exchange Converts embedded link to http when Sending to External Recipients

Similar Messages

Maybe you are looking for