Exchange events not synching correct after 3/14/2010

I have several all day events in Exchange/Outlook. Starting on 3/14/2010, they appear a day earlier than on my Pre (1.3.5.1) than in Exchange. This does not happen for regular events (non-all day).
Post relates to: Pre p100eww (Sprint)

That date corresponds to the start of Daylight time in the US - 2am 2nd Sunday of March.

Similar Messages

[E2010] [EWS] [C#] [Windows]: Exchange-service not working anymore after upgrade to 2010

I have searched for this error/question I have but the solutions were not related to my situation and/or didn't provide any further infiormation. That being said... Under Exchange 2007, following code was running properly:
ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack;
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2007_SP1);
service.Url = new Uri(ConfigurationManager.AppSettings["ExchangeWebService"]);
service.Credentials = CredentialCache.DefaultNetworkCredentials;
EmailMessage mail = new EmailMessage(service);
mail.Subject = subject;
mail.Body = message;
mail.Attachments.AddFileAttachment(row.Path);
mail.ToRecipients.Add(receiver);
mail.Send();
Now, there has been a migration to Exchange 2010 and I get the following message from the `Microsoft.Exchange.WebServices.Data.ServiceResponseException` that is thrown:
When making a request as an account that does not have a mailbox, you must specify the mailbox primary SMTP address for any distinguished folder Ids.
I know that the enumeration for the ExchangeVersion can be changed but when I change this to `SharePoint2010` for example I get following error-message:
Exchange Server doesn't support the requested version.
Are there settings in Exchange that need to be set for which I have to contact the Exchange-administrator or is there something in the code that needs to be changed?

Hi Abbas,
I'm not quite clear on all API version changes, however I would indeed recommend trying the current version (which is downwards compatible). I think I remember something about 1.1 being slightly buggy, but that's more of an itch in the back of may brain
than real knowledge. Still, being fairly current is a good state to be in usually.
Given the information however, my best guess really is that they changed their transport rules to prohibit anonymous sending. If that's the case, the executing user either
must be given either ...
A valid mail address
Sending as permissions
or Impersonation permissions and the identity of the user to impersonate (who then will be the sender)
or on the other hand, get permission to send mails anonymously (which is really a custom transport rule).
Cheers,
Fred
There's no place like 127.0.0.1

ICal (4.0.4 (1395.7)) on Mountain Lion 10.6.8 on MacBook Pro 13" not synching correctly to iPhone 3GS

iCal has stopped synching calendars correctly with my iPhone 3GS. I am syncing via iTunes, not via the cloud; I have the latest patches for Mountain Lion; I cannot upgrade the machine's OS, because I need Rosetta. The iPhone is running the latest version of iOS Apple has pushed, but this began a couple of patches ago - I was holding off on the latest because of Reasons, and upgraded hoping the upgrade would fix it. It didn't. I also have the latest version of iTunes for Mountain Lion.
Symptoms:
No appointments made on the phone, in any calendar, make it into iCal. (I have five calendars that used to sync; all stopped at once.)
Old appointments made in iCal before this started happening still sync correctly from iCal to the phone.
New appointments made in iCal sometimes make it onto the phone, and sometimes do not. I haven't been able to detect a pattern.
When new appointments made iCal do make it onto the phone, they are correct, except that there is always a second ghost appointment also created, only on the phone, called "New Entry." It will have the same time and date information as the actual appointment, and be listed as the correct calendar, but will contain none of the associated appointment data.
I have tried:
Upgrading phone to latest iOS version
Desyncing all calendars from phone, then resynching them.
Telling iTunes to overwrite all calendar data on sync. (I know this actually happened, because appointments I'd made on the phone which had not synched disappeared after overwrite was initiated.)
Resetting phone to factory and reapplying everything from scratch. (This was the most recent action, two weeks ago, was a huge pain.)
None of these resulted in any change in observed behaviour.
What is new in the last few days is that until now, all iCal appointments had been making it to the phone, so as long as I made the appointments in iCal first, I could at least know of them while in the field. Alas, that is no longer the case.
Any ideas?

Sorry, it says "New Event," not "New Entry." My bad.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Outlook 2007 and iPhone Calendar All-Day events not displaying correctly

I recently took the 3.1.3 update for my iphone and have since noticed that syncing all-day events from my Outlook 2007 exchange environment to the iphone is not working correctly. The all-day flag on the iphone is not being checked, thus the event shows up all over the calendar instead of just a single item at the top of the calendar. This only happens for multi-day events. Single-day, all day events show fine. Here's the tests I did:
1. Created a single day, all-day event for tomorrow June 18 in Outlook 2007. Made sure that they all-day checkbox was checked in Outlook. Waited for the sync and it shows up fine in iPhone calendar. There is a single line at the top of the "Day" view that lists the event. When you look at the event, the all-day checkbox is checked in iphone calendar.
2. Next I updated the event in Outlook to make it a multi-day, all day event. I changed the end date to be June 19. I made sure to leave the all day checkbox checked in Outlook. Once synced, the all day checkbox on the iphone is now unchecked and as a result the event takes up the whole "Day" view for both days.
Is there a solution for this? Only seen this since I updated to the 3.1.3 firmware. All events show up the right way in Outlook. It is only the iPhone calendar that shows them wrong. Thanks in advance for any help.

Same problem here.
All Day events entered in Outlook 2007 on my work machine that have ALL DAY checked and are only on that ONE Day, seem to come out fine. If however we have an all-day event that goes multiple days, then it enters it on my iphone taking up 00:00-00:00, which is very messy if you have two ALL-day envents on the same day (when tracking different personnel for example).
I have noticed the real annoying item though is that changing it on my iPhone 4 directly, that once I put in the right start and end dates, and choose ALL DAY, about 5 seconds later it actually changes the START DAY! This makes you go back to change the start day, then it changes the end day so you change that, and now finally all sorted.
This NEVER happened on my iPhone3G that I have used with Excahgne for over two years now. Only since I got my iPhone4.
PLEASE Apple, fix this!!!!

Photos not synched correctly on iOS

Hi and thanks for reading.
Sometimes it happens that some photos are not synched on my iOS devices through iPhoto and iTunes.
For example, I have the option to sync my last 3 months events. Everything is synched but there is one event of which I have 20 photos, all shown on iTunes iPhone synch options, but after synch I have that event with only 10 photos on the iPhone.
This is not the first time it happens.
Any help?

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

ICloud status not displayed correctly after changing tags

Hi everybody,
I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
Thanks for any help,
Andreas

The reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
it's returning sysObjectID as standalone.
It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
Unless this bug is fixed, LMS will not be able to show it as stack device.
You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
Else we need to wait for the fix of this bug.
-Thanks
Vinod

IPhoto events not syncing correctly with iPhone

Hello,
Basically, my iPhoto events are not syncing correctly with my iPhone. Some events will sync, whereas others won't, though no error messages are ever displayed.
I have all my photos, 961 photos in 34 events, organised in iPhoto, however iTunes doesn't seem to recognise all of these events, only reporting 881 photos. I've got iTunes set up to "Sync photos from iPhoto - All events" and this works for most events, but not all.
On my iPhone, I can tell which events are missing, but no matter how many times I restart my Mac or sync my iPhone, it refuses to sync the few missing albums. There is over 4Gb of available space left on the iPhone, so this shouldn't be an issue.
Many thanks in advance.
Peter.

Any ideas, please? I hope I explained my issue clearly enough.
Thank you,
Peter.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Login action buttons no longer work and some pages not displaying correctly after upgrade.

After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in IE.

Please update the firefox to the latest version of firefox 26
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Gradient fill not displayed correctly after applying a rotation angle

Hello,
I've created a rectangleframe and applied a gradient fill, and afterwards I have applied a rotation of -90 to the gradient fill. After the rotation the gradient does not display correctly anymore (after saving the document to .idml I've noticed that the property GradientFillLength was not recalculated after rotation). Is there a command to force the update or am I missing something? This problem occurs in InDesign CS3/CS4.
Thank you
UIDList targetList(m_SplineUIDRef);
InterfacePtr<ICommand> applyCmd(Utils<IGraphicAttributeUtils>()->CreateFillRenderingCommand(
gradientUid, &targetList, kTrue, kTrue));
CmdUtils::ProcessCommand(applyCmd);
InterfacePtr<ICommand> angleCmd(Utils<IGraphicAttributeUtils>()->CreateGradientFillAngleCommand(
gradientAngle, &targetList, kTrue, kTrue));
CmdUtils::ProcessCommand(angleCmd);

Thanks. I saw those threads but this is not that issue. I really think that this is a bug in the latest update for illustrator.

Why is repeated events not populating correctly?

I am trying to set up a repeating event at icloud.com and it is not populating correctly. I set up a custom repeating event to repeat every two weeks on certain days and it shows up every week regardless that I selected repeat every "2" weeks"

If known-good battery,
& known-good adapter;
check Mag-safe Board.
http://www.ifixit.com/Device/Mac_Laptop
http://www.ifixit.com/Device/Apple_AC_Adapter
Good luck & happy computing!

Exchange events not synching correct after 3/14/2010

Similar Messages

Maybe you are looking for