Exchange management console not able to access after rename the administrative AD account

I had an administrative user account(AD Admin a/c) KXP004 that
recently rename as RPS001
The account which was working fine before renaming and was able to access the exchange console. Since I rename the account, everything is working fine except the exchange management
console.
When trying to access the EX Management console displays an error message saying it cannot find the new name. What can we do to make the exchange management
console work for the renamed account? Please assist.

Hi Sherieftkl,
After renaming the administrator account in AD, did you log off and then log on by using the new administrator name? Please log on again and monitor the result.
In addition, please also open Event Viewer and check if find some related events.
-->Since I rename the account, everything is working fine except the exchange management console.
By the way, if this issue just occurred for EMC, I also suggest that you should post the question in
Exchange Forum. I believe we will get a better assistance there.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Exchange 2010 mailbox not able to access auto-mapped Exchange 2013 CU3 mailbox

Hi,
We are in co-existence with Exchange 2010 SP3 and Exchange 2013 CU3.
Outlook Anywhere and Autodiscover pointed towards Exchange 2013 CAS servers. Everything works fine irrespective where is mailbox is located Exchange 2010 or 2013.
When I tried to access auto-mapped mailbox from Exchange 2010 as primary mailbox accessing auto-mapped Exchange 2013 mailbox "Cannot expand the folder. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network
problems or the Exchange server is down for maintenance".
Exchange 2013 OutlookAnywhere "Externalclientauthenticationmethod" is Basic and "Internalclientauthencitcationmethod" is NTLM. Everything is setup as per the Tech-net recommendations.
Checked both these articles but still it is not working:
http://support.microsoft.com/kb/2839517
http://support.microsoft.com/kb/2834139
Please let me know if there are any other ideas.
Raman

Hi,
I recommend you refer to the following articles to troubleshoot the issue:
Troubleshooting Mailbox Auto-Mapping : Autodiscover
Details about the shared mailbox that is to be accessed will be returned to the Outlook client by the autodiscover process. This is really handy to know if you are ever in the position where you need to troubleshoot why the auto-mapping feature isn’t working
correctly
Troubleshooting Mailbox Auto-Mapping : Permissions
When you use either the Exchange Management Console or the Exchange Management Shell to grant a user with full access permission against another mailbox, permissions changes are made to allow this as you might expect. Certain Active Directory attributes
are also updated to reflect both the Active Directory account of the mailbox being accessed as well as the Active Directory account of the accessing mailbox. Specifically, you can check the contents of the msExchDelegateListLink and msExchDelegateListBL Active
Directory attributes to see these details and it is worth checking these if you have any suspicions that things aren’t working correctly.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange Management Console not showing anything....

I have 2 Exchange 2010 servers in production. My new server is installed, and ever since it was install, I have not been able to see anything under Exchange Management Console. I receive no errors when I go through the Exchange Management Shell.
I don't receive any errors at all until I I try to Collect Organizational Health Data. When I do this, MMC crashes and I have the option to unload the snap-in or report this error to Microsoft. I can manage the Exchange environment from my first
Exchange server with no issues. I am logged in as the domain administrator which has membership to the organizational management security group in the exchange security group.
Any help is appreciated.

Hi Lee,
I suggest install the Exchange 2010 SP1 UR6 or later.
I found a KB, please check whether we match the situation:
An empty list returns when you try to use the EMC to specify a server to connect to in an Exchange Server 2010 SP1 environment
http://support.microsoft.com/kb/2549183
If this issue caused by permission. Please try to add Administrator into Organization Management (we have done) and Server Management roles via EMS.
Add-RoleGroupMember "Recipient Management" -Member Administrator
Add-RoleGroupMember "Server Management" -Member Administrator
If you won't be able to do this then try adding Administrator user into both groups available in AD.
If still not working, I suggest re-install it if you don't mind (since there is no data existed on the new Exchange server).
Please using DASIEdit to check whether we have uninstalled the Exchange server completely.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Mac pro suddenly is not able to start after accepting the password

for some reason after the last time i did a shutdown the mac now does not start up. I enter the password ,( correctly , i checked for caps lock etc..) it seems to accept it and then it blinks and takes me back to the login . The same thing happens on the guest account I had set up. different password entered correctly.
OS is the lastest 10.7 with all the updates.

yes , that was probaly the case, though swore i had used shift when starting. Anyway I then tried it again in safe mode but same result. I got into the hard drive and was able to track down the system log finally .
I saw the following :
May 7 16:43:19 aMac-Pro-4 SecurityAgent[117]: Login Window login proceeding
May 7 16:43:20 aMac-Pro-4 loginwindow[62]: Login Window - Returned from Security Agent
May 7 16:43:20 aMac-Pro-4 loginwindow[62]: AuthorizationRef returned an error (100022), with username = MYUSERNAME
May 7 16:43:20 aMac-Pro-4 loginwindow[62]: This indicates that a SecurityAgent plugin has returned something other than errAuthorizationDenied (usually cancelled) after the auth record is set up.
May 7 16:43:20 aMac-Pro-4 com.apple.loginwindow[62]: AuthorizationRef returned an error (100022), with username = MYUSERNAME
May 7 16:43:20 aMac-Pro-4 com.apple.loginwindow[62]: This indicates that a SecurityAgent plugin has returned something other than errAuthorizationDenied (usually cancelled) after the auth record is set up.
looking around for this 100022 error i found a solution that worked for someone else with the same issue and tried it:
I was able to fix this by using the terminal (either in recovery or singler user mode) and removing the file /var/audit/current. It's supposed to be a symbolic link pointing to the most recent file, but it seems like it gets corrupted.
So for the single-user fix:
Reboot and hold Command+S for singler user mode.
Once you get a command prompt mount the partition for write access
/sbin/mount -uw /
Then remove that file.
rm /var/audit/current
Sure enough i removed the corrupted file and it works like always, I can boot type in my password and I'm back in action.
Now I am just left wondering how the corruption happened? any ideas?
Thanks for all of you who looked at this
Rich

Not able to connect after changing the password using ALTER VALUES clause

Hi,
Just now John explained about VALUES clause in below thread.
Expired Status
I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
Please see the version details below. And the SQL statements which I have tried.
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: sys as sysdba
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> SELECT password
2 FROM dba_users
3 WHERE username = 'HR';
PASSWORD
4C6D73C3E8B0F0DA
SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
User altered.
SQL> SELECT password
2 FROM dba_users
3 WHERE username='SURI';
PASSWORD
4C6D73C3E8B0F0DA
SQL> conn suri/hr -- HR account's password is hr only
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SQL>Thanks,
Suri

Suri wrote:
Hi,
Just now John explained about VALUES clause in below thread.
Expired Status
I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
Please see the version details below. And the SQL statements which I have tried.
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: sys as sysdba
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> SELECT password
2 FROM dba_users
3 WHERE username = 'HR';
PASSWORD
4C6D73C3E8B0F0DA
SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
User altered.
SQL> SELECT password
2 FROM dba_users
3 WHERE username='SURI';
PASSWORD
4C6D73C3E8B0F0DA
SQL> conn suri/hr -- HR account's password is hr only
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SQL>Thanks,
SuriYou can only do it for the same user, as the password is a hashed value that includes the username as part of the hashing (It's either the username or some internal object id or something). So using the hashed value against another user won't work.

Could not able to access workbook from the favorites of User Menu

Hi all,
I have got a problem in accessing Workbook from the User menu (SAP GUI) Favorites.
I added a workbook to my favorites but now when i double click on the Workbook from my USER MENU (SAP GUI),
BEX is opening and the connection is also maintained but the workbook is not appearing in the BEX.
I checked in SU53 and this is not related to any authorization issues.
Could anyone help me in solving this issue and
providing ?

I can't aunderstand why it happens, but try adding the workbook to a role and assign the role to your user.
Hope it helps.
Regards

Not able to access Mozilla with the generic account (NIS account) by multiple users simultaneously

• Using a single Generic account multiple users are trying to login from different machines simultaneously to Mozilla Firefox. • The Mozilla Firefox is fully operational only for the first user who has initially opened Firefox session. • If the second user trying to access the Firefox with the same account, it is displayed as there is another session is already running and most of the Firefox options are getting grayed out i.e the navigation, history and forward/ backward tabs available in the menus become inaccessible.Our Requirement is that multiple users need to access multiple sessions simultaneously with all the features of Firefox available. Kindly assist me here.

Same problem, Pls help me

Exchange management console initialization failure

Hi all.
One of my clients SBS 2011 standard servers downloaded some updates yesterday & since then both the Exchange Management Console & Shell fail to open. In addition mail to the smart phones no longer works. Everything else seems ok. Mail is delivered
& received via Outlook, all services are running. I have tried uninstalling the updates, but the Microsoft C++2010 Redistributable that was installed yesterday does not appear in the list of updates to uninstall. Only one of these updates is listed
which is from 2012. This is the first part of the problem to resolving this issue. There are no "hidden updates" I am sure that this update was the most likely to be causing this issue. Any clues as to how to remove this update?
The Exchange Management Console error is below.
Connecting to the remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
Exchange Management Shell errors.
Connecting to the remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure.
Connecting to the remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response
from the destination computer. The content type is absent or invalid.
I have checked the settings as per the following possible solutions.
https://support.microsoft.com/kb/2027063?wa=wsignin1.0
I have added & removed & added the WinRM IIS extension & ran WinRM Quickconfig
I have checked Powershell directory in IIS on the problem server. Make sure SSL is not required. Allow
only Anonymous access.
I have run this command from the Windows Powershell - note the warning
set-user yourusername -remotepowershellenabled:$true
Warning: The command completed successfully but no settings of “domain.local/MyBusiness/Users/SBSUsers/User” have
been modified
Checked the ExchangeInstallPath environment variable
Checked the application pool settings in IIS are set to Local System Identity
About the only item I have not tries is to remove & reinstall the PowerShell directory. I will do this over the weekend.
This server has been in operation for almost 3 years without an issue. Microsoft updates come down & now I have been working on the issue for about 6 hours. Any other ideas?
Regards, Scott

Explore Powershell Virutal Directory , what is the size of Web.config file?
What happens if you browse Powershell VD ?
Check the Powershell Application Pool
Make sure Enable 32 bit application under advance settings is set to FALSE
Perform an IISRESET
Also refer to -
http://blogs.technet.com/b/whats_on_scotts_mind_today/archive/2012/12/07/exchange-2010-unable-to-open-exchange-management-console-initialization-failed.aspx
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

Setting EX2007 mailbox permissions with Exchange Management Shell not reflected in Exchange Management Console

Hello,
I'm trying to use PowerShell to script some mailbox permissions. The mailbox permissions I set in the shell are not displaying in the EMC. The command I'm using is:
add-MailboxPermission -accessrights fullaccess -identity $username -user MYDOMAIN\$supervisor -confirm:$false
I get confirmation from the shell:
Identity             User                 AccessRights
IsInherited Deny
MyDomain.net/Separa... MYDOMAIN\mysupervisor    {FullAccess}
False       False
Afterwards, when I look in the Exchange Management Console for this user (Right click, Manage Full Access), even after allowing time for replication, I don't see this new permission reflected there. But If I use Get-MailboxPermission
$username, the permissions show up:
Identity             User                 AccessRights
IsInherited Deny
MyDomain.net/Separa... MYDOMAIN\mysupervisor    {FullAccess}
False       False
Why is this addition not being reflected in the shell?

Hi,
The cmdlet you use to grant full access permission is right. If your case, please let "mysupervisor" access to this user's mailbox and verify if he/she can access it. Maybe Exchange Management Console has not been updated well.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Hide / Remove access to Organization Configuration in Exchange Management console Ex 2010

Hello,
I am planning to give EMC access to helpdesk and modified Helpdesk Role so that they have Mail Recipient Creation and Mail Recipents Assigned roles.
Helpdesk are able to created new and also modify exixiting mail enabled objects fine.
My boss wants me Hide / Remove access to Organization Configuration in Exchange Management console Ex 2010 as they are able to edit Client access policies. Is this possible ?
Thanks,
Ne0

Hi,
Please use the following cmdlet to check the permission of Helpdesk support group on all management roles.
Get-ManagementRoleAssignment -GetEffectiveUsers | Where { $_.EffectiveUserName -Eq "Helpdesk support group" }
Then you can remove some unnecessary permissions of the Helpdesk support group.
Hope it helps.
If there is any problem, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

I am not able to access to my exchange on ipad mini even though my exchange account is verified and correct

i am not able to access to my exchange on ipad mini even though my exchange account is verified and correct

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Not able to access weblogic console to other systems .

Hi All,
I am working on two project so I am using JDeveloper 11.1.1.4 and JDeveloper 11.1.1.7 .
For my usage I provide different port no for web logic servers .
11.1.1.4 version JDeveloper have the PortNO 7101 .
11.1.1.7 version JDeveloper have the PortNO 9101 .
In local I can Run the two Jdeveloper applications at the same time but
My problem is ,
For testing I am able to access http://127.0.0.1:7101/console/login/LoginForm.jsp URL to other systems .
But I am not able to access http://127.0.0.1:9101/console/login/LoginForm.jsp URL to other systems .
In log it's showing ,
<Logger> <error> ServletContainerAdapter manager not initialized correctly ..
How to access different port no web-logic console to other systems ?
Thanks ,
David ..

Hi All,
I resolved my issue by following below steps ,
Goto ->Weblogic Console ->Home ->Default Domain -->Control -->Default Server -->Remove the data from Listen Address field .
Now I can using two JDeveloper with different web-logic port no and the target URL can access from other systems .
Thanks ,
David .

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

Exchange management console not able to access after rename the administrative AD account

Similar Messages

Maybe you are looking for