Exchange roaming (or lack of) with E55

Hi there - can anyone help with the following:
E55 set up with a hosted Exchange account (via 123together.com) and a Yahoo Mail account. The settings of the Yahoo account allow for me to choose whether it will sync email when roaming from home network or not, but the Exchange account has no such option and appears 'hard-wired' to NOT allowing sync activities whilst roaming - it is actually the Exchange mail I want to be able to use whilst abroad with work!
My mobile service provider (O2) says it is all set up on their side and cannot help - everything else seems to work well when abroad so I can't argue with them.
I've tried deleting and rebuilding the Exchange profile to no avail and have even reformatted the phone and installed everything again - still to no avail...
It has all got very frustrating... so help to solve this is much appreciated as I cannot find an option to change.
Cheers
Cralster

Hi Welcome to the forums
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
can you please edit out the reference number as this is a public forum
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Any idea how to exchange the CTI-OS Lincense with CAD License?

Any idea how to exchange the CTI-OS Lincense with CAD License?

Hi,
I think that you only have to install the CAD component in the PG or another machine.
If you need a file license, contact your AM in order to get an upgrade from CTIOS to CAD.
Hope this helps,
Juan Luis

How much does it cost to exchange iPhone 5s - 16 GB with iPhone 6 ?

I want to exchange my black iPhone 5s with a black iPhone 6 from US, kindly let me know how much should this cost?

Apple doesn't exchange/upgrade phones past their 14-day purchase window. But you can certainly buy a new iPhone 6 and sell your 5s on eBay or elsewhere. Just remember to remove your iCloud account and turn off Find My IPhone before you do so.
Matt

I use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

i use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

I have loaded my Firefox bookmarks into Internet Explorer Favorited. I also uninstalled Safari.
I go to iTunes on my phone and see no wat to connect my iPhone to my laptop. I see Music, Shows, etc., the kind of stuff I would expect, but no clue as to how to proceed.
Would you please be so kind to fill me in on how to "That syncing is done via iTunes. Connect the device to iTunes, select it, then go to the Summary page and select to sync bookmarks."?
I am not sure what you mean by "Summary Page"
Thank you

I purchased Acrobat Standard, not realizing it is not compatible with MAC. I need to exchange. I just chatted with a so-called "specialist" who told me to sign in and download the same program. I got the same blasted message. I need help. I need to exchan

I purchased Acrobat Standard, not realizing it is not compatible with MAC. I need to exchange. I just chatted with a so-called "specialist" who told me to sign in and download the same program. I got the same blasted message. I need help. I need to exchange this program for one that is compatible with my MAC. The standard is of no use to me at all. I feel like I have been ripped off

Hi Kargi,
We are working on getting things straightened out for you. You should be hearing from a Customer Care agent shortly.
Best,
Sara

Can Exchange 2007 to be integrated with SharePoint 2013

Can Exchange 2007 to be integrated with SharePoint 2013?

In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Publishing Exchange 2013 Outlook Web App with Forefront TMG 2010

Hello guys,
I have published Exchange 2013 via TMG 2010 with pre-authentication. Since this is the first time I am doing it- I want to ask experts for the explanations:).
When I configure Active Sync on mobile, I just type the password and it's starts syncing after 20 sec.
When I use browser and trying to login using TMG logon screen, after I enter credentials (if they were not wrong), I get exchange 2013 logon screen ( because my password was checked by DC's).
I have customized TMG tamplate to Exchange 2013 tamplate, but it did not help- I have two logon screens.
Is it possible to configure TMG for showing only one logon screen ( without disabling pre-authentication) ? Does it work this way?
Did I miss something?

Hi,
Please try to enable FBA for external and internal OWA 2010 users by the methods in the blog below.
There are several ways to accomplish this:
Have internal users pointed to the internal interface of the Forefront TMG and utilize the forms-based authentication logon page offered by Forefront TMG.
Deploy Forefront UAG instead of Forefront TMG. Forefront UAG allows you to have FBA enabled on both the Exchange 2010 Client Access Servers and on the Forefront UAG solution itself.
Publish Exchange 2010 to the Internet using Forefront TMG but do not configure pre-authentication. This way the users need to go through the Forefront TMG solution, but will authenticate directly against the Exchange 2010 Client Access servers.
Configure an additional OWA and ECP virtual directory on the Exchange 2010 Client Access Servers.
Reference:http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part1.html
Then check the blog
- Creating a custom Forefront TMG 2010 OWA FBA logon page
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Is it possible that Exchange UM could be configure with two call managers over the same sip?

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

Consult the store from which you bought it for their return policy.
Best of luck.

Internal and External Mail Exchange servers server not communicating with IronPort

Hello Support Community,
I have setup external mail exchange server and an internal mail exchange server to test out ironport, those two are not communicating via IronPort neither are they both recieving eachothers sent messages in their inbox, i have setup a smart host in both of those servers to point to ironport but thats still of no help. I have two smtp routes setup as well one's recieving domain: dummy.local which is external and its destination host: softheon.local which is internal which means its smart host is pointing to ironport's data 1. Is there something that im missing which is not letting these two mail exchange servers connect to each other as well as connect with the ironport to catch the msgs being sent
thanks

Are you trying to relay through the appliance, or just email the appliance?
If trying to relay through the appliance, make sure the IP address of your exchange server is added to the RELAYLIST under the HAT (host access table) located under Mail Policies Tab - Host Access Table. Click on the RELAYLIST and add the IP - submit and commit changes.
If you are just trying to email the appliance, you may be getting dropped at the handshake level based on reputation (or lack thereoff).
From your exchange boxes, open up a command prompt and telnet to the ironport on port 25 and initiate a command line email.
So:
telnet IP-OF-IRONPORT 25 (hit enter, you should connect up and see the IronPort banner)
helo (type helo - from here you'll probably get dropped by the IronPort)
mail from: [email protected] (if you dont get dropped put in your email address)
rcpt to: [email protected] (put in the other email address)
data (type data and hit enter)
This is a test. (type anything, this is the message body)
. (when done typing, type a single . (period) and hit enter. The email should send if you got that far.
You most likely need to add the IP addresses of your exchagne boxes to the WHITELIST under the HAT to resolve any reputation issues from your test exchange boxes.
Regards,
Chris

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Exchange Online Plan 1 use with Office Home and Business 2013 License

Question: Does the Office Home & Business 2013 Outlook work properly with Exchange Online Plan 1? (are there limitations?)
As a farm dealership needing 44 licenses (very light Office product use except email), I'm struggling with the sustaining cost of Office365 Bus Prem. I've pretty much settled on buying Outlook 2013 instead of any subscription models. Office Home
and Business list price is $219 making a one time purchase cost $9639. I can do that once. (O365BP is $7,920 annual). Outlook 2013 stand-a-lone will run me around $3500 once plus $2112 annual. I'd really like the full office package. I wish
the pricing worked out better for rural, light use businesses.

Hi GHopf,
Great advice from scottylat2486.
I find some article about the difference of Office production, please refer to:
Compare Office 365 Business Plans:
https://products.office.com/en-us/business/compare-office-365-for-business-plans?legRedir=true&CorrelationId=de56e70f-2f8a-4633-87e2-7cf478e1adb2
Choose Microsoft Office Products:
https://products.office.com/en-us/buy/compare-microsoft-office-products?legRedir=true&CorrelationId=5770b405-d067-42b4-b799-fc3dbc4cc21c
Outlook license requirements for Exchange features:
https://support.office.microsoft.com/en-us/article/Outlook-license-requirements-for-Exchange-features-46b6b7c5-c3ca-43e5-8424-1e2807917c99?CorrelationId=736f8dec-4c9f-4501-a070-191e5833bd71&ui=en-US&rs=en-US&ad=US
This question may be related to Office 365, please contact Office 365 Team so that you can get more professional suggestions. For your reference:
http://community.office365.com/en-us/default.aspx
Best Regards,
Allen Wang

Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
Josh

You have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Can i exchange my old Macbook Pro with a new one

I have the 2010 Macbook Pro, but i would like to exchange it with the Macbook Pro Retina 13''. Is it possible.
ASAP

Ramzy01 wrote:
I have the 2010 Macbook Pro, but i would like to exchange it with the Macbook Pro Retina 13''. Is it possible.
If by exchange you mean Trade-In...
Apple does not do Trade ins...
See Apple's ‘Buy Back’ program here... But you may prefer to sell it privately...
http://www.apple.com/recycling/gift-card/

Exchange roaming (or lack of) with E55

Similar Messages

Maybe you are looking for