Excise doc in document flow

Dear Gurus,
When I am creating the billing doc and sebsequently the excise invoice, in the billing doc. flow two accounting documents are showing - RV and EI.
Now when I cancel the excise in J1IIN, the same EI acct. doc. is still showing in the doc flow and there is no cancelled EI acct. doc.
Now when I create a new excise in J1IIN, a new EI acct. doc. is showing in the doc. flow and previous EI is also showing.
Is this the standard SAP functionality?
Also where can I see the cancelled EI doc....also in SD side how can I check that the EI doc. has been reversed.
thanks!!
PUB

Hi
Also where can I see the cancelled EI doc....also in SD side how can I check that the EI doc. has been reversed.
You can check the transaction J1IIEXCP. It has two options (A) Excise Invoice cancelled but Invoice is still open , and (B) Invoice Cancelled but Excise Invoice not cancelled.
Hope this will help you.
Regards
Amitesh

Similar Messages

Why I don't see all docs in document flow of i/c process?

Hi Experts,
we are using the following special SD process for i/c billing and final customer sales:
Contract --> SO (OR) which triggers PR --> PO (converted by PR) --> OD (NL ref. PO) --> IV(ref. OD) and for the final customer, initial SO (OR) --> OD (LF ref. SO) --> F2 (Ref. OD).
The problem is that I don't have the full document flow for this process despite the fact that all documents are linked together.
More precise, any document linked to PO (OD (NL), GR/GR, IV) is not displayed in SO doc flow, only the PO without details. So, my flow is Contract, SO (OR), PO, OD( LF), F2.
Why this happened? Is there a way to have in one picture all documents related to this process?
Thanks for your assistance
Sakis

In your sales order (with complete sales process), try Status Overview.
To check that, Sales Order - Document Flow( Press F5 from keyboard ) - Status Overview (click on button).
Expand all the nodes, you should be able to see all the docs with stages of sales process.
Regards
JP

Excise invoice in document flow

Hi,
In SD, when we process the document flow thru billing, i want to include the excise invoice in the flow.(this is the case of factory sale) where path is order -delivery- PGI - Billing - Excise
How can I fulfil this requirement.
Raj

>
harshalyem wrote:
> Hi,
>
> In SD, when we process the document flow thru billing, i want to include the excise invoice in the flow.(this is the case of factory sale) where path is order -delivery- PGI - Billing - Excise
>
> How can I fulfil this requirement.
>
>
>
> Raj
Check t.code J2IF ?

Excise document number in standard document flow

Dear Friends,
Is it possible to capture the excise invoice no. in the standard document flow so that at any point of time , either from the sales order or the delivery document or the billing document, the excise invoice can be seen in the flow?
Although the excise document flow can be seen in either J1IIN or J2IF, my customer wants to have the same in standard flow. Please suggest whether any ABAP development needs to be done for the same or it can be achieved through functional customization only.
Regards
Raja

Hi Raja
This functionality is not available in standard SAP as far as I know.
Also there is no append available for VBFA table.
U can check with SAP OSS if they can guide on it.
Regards
Mandar

Excise document number update in Document flow.

Is there any configuration for update the excise document in Sales order document flow.
Ex : Like. - > SO-> Delivery-> Billing -> Excise invoice no
Ramesh B

Hi Ramesh & Nikhil,
At present There is no provision to update excise invoice number in Sales document flow.
There are no appends defined for table VBFA . With the help of Abap developer u can try for an append structure.
But in that case development will include changes in excise invoice program, to update the table.
Do the anaylsis carefully before any development.
There is one alternative available , u can develop a sales register which will contain both excise and commercial invoice along with sales order number.Generate lay out for suitable search.
Regards
Mandar
Edited by: Mandar Deshpande on Sep 21, 2009 9:16 AM

Deleted outbound delivery doc displayed in document flow

Hello,
Deleted outbound delivery document is still displayed in document flow and its status is 'Archived'
I don't know why deleted document is seen and moreover I haven't ever seen such a status in document flow. For your reference, the delivery document is displayed in only VF02 or VF03 with its billing document, which is also cancelled. One more thing, its sales order is also deleted.
Thanks for your kind response in advance.

Hi,
This is happening because invoice can only be cancelled and not deleted. While sales order and delivery can be deleted. So if you check the document flow of the cancelled invoice it will show the delivery number but with status as archived. If you try to display such documents you will get an error message 'Delivery xxx does not exist'.
If you delete a sales order and delivery which does not have an invoice this will not happen.
Regards,
Sajith.

Excise values are not flowing in MIGO

Dear All,
I am facing a problem during MIGO.
THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
1 I have created a PO.
2.Delivery through VL10D
3.Picking-vl02n
4.Created Bill-VF01
5.Created Invoice and saved it
When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
Regards
Manash

Hi,
Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
SETOFF Must Be Maintained:-
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
HX1     IN: A/P SECess SOTot
If it is there please follow the Following steps for STO
1.     Create Purchase Order(STO) using ME21N
2.     Create Outbound Delivery using VL10B
3.     Create Billing Document using VF01
4.     Create Excise Invoice using J1IIN
5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
Hope Help U !
Regards,
Pardeep Malik

Contract not visible in sales order document flow

Hi
I am supposed to create sales order from Contract.The requirement is that only header data should be copied.Thus In Copy Control configuration I did not maintain item level and schedule line level settings for these document types. The issue is that after running the whole cycle from Contract -->SO --> Delivery --> Invoice when I see the Sales Order document flow I can see all other documents but not the contract.Also In Contract document flow I can see only sales order but not delivery and invoice.Please guide.

Hello,
Update Document Flow option is available only at Item Level in copy control setting from Contract to Sales Order.
Check out your Copy Control Records at Item Level. There would be "2" mentioned in "pdate document flow" box.
2 means Create doc. flow records except for dely/goods issue/billdoc. Here you to maintain "X" for Complete Document flow.
Hope this helps,
Thanks,
Jignesh Mehta

Outbound Delivery Document Flow (One-Step procedure) Goods Receipt

I am trying to extract the Goods Receipt status of Outbound Deliveries which are posted using One-Step procedure. I can do this one delivery at a time using VL03N.
Some sites (plants) are configured with One-Step procedure and others are configured as Two-Step procedure.
Document flow of an Outbound Delivery is extracted from table VBFA.
For the two-step delivery process (Movement type 641) the Goods Receipt is recorded in table VBFA (Subs.doc.categ. / VBTYP_N = 'i'). Therefore, I can easily extract the goods receipts for these deliveries.
However, for the one-step procedure (Movement type 647) the Goods Receipt does not appear to be recorded in table VBFA. Does anyone know which table the Goods Receipt is stored for one-step procedure?
Using transaction VL03N we can view the document flow. It appears that for One-Step procedure the Goods Receipt is held at item level. By highlighting a delivery line in VL03N and viewing the document flow we can see the goods receipt for One-Step deliveries (therefore, the data must be held somewhere).
I understand that by using One-step procedure the goods receipt is posted automatically, so we can assume that there should never be outstanding Goods Receipts for One-Step sites. However, I have been tasked with the job of reconciling all deliveries for the past 12 months. I need to prove that a goods receipt has been posted for every single delivery.
Any advice is much appreciated.

Thankyou for the advice. I will proceed with your recommendation.
However, the query is inefficient since the link between LIKP and MKPF does not use the primary key (Article Doc. / MBLNR). We have almost 7 million records in MKPF table.
Is there any intermediate tables I can include between LIKP and MKPF so that only primary keys are used for the joins?

Document flow not getting updated

Dear Experts,
I am facing a problem in document flow.
I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
Kindly advise.
Regards,
Randhir

Hi
Pls see the copy control sales document to sales document T.Code VTAA
Go to the item category and see the document flow field is activated or not if is not activated pls activate and re run the scenario
pls check your correct defined Z item category the document flow is activated or not.
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

Document flow in Purchase order

Hi,
How can check the document flow in purchase order(me22n). Please help me on this issue..
Thanks..

HI
There is no document flow like SD in MM
Inorder to get the doc flow for a PO you can goto ME23N or ME22n and in item details click on PURCHASE ORDER HISTORY TAB here you will get the GR , IR etc.
Alternatively you can goto table EKBE and enter the EBELN (PO number ) and execute you will get the doc flow
regards
Prashanth

J1IIN reversal accounting document not reflected in SD document flow

Dear Experts,
I have created a billing document and then posted excise through J1IIN. When I reverse the Billing through VF11 there are two accounting documents generated(one for billing and other for Excise reversal). But the Excise reversal accounting entry doesnot update the table J_1IEXCHDR for which again i have to post a reversal for Excise through J1IH. So in order to remove the extra accounting entry for Excise reversal during VF11 we have applied Note No:- 551932 due to which the extra accounting document for reversal of Excise is not getting generated but the reversal of Excise made through J1IH doesnot get reflected in the SD document flow.
Please let us know how to get this entry in SD document flow.
Thanks & Regards
Edited by: Aniruddha B Mahalle on Feb 13, 2012 2:45 PM

Hi Vikas,
Cancelling J1IIN excise invoice will by default take me in the transaction J1IH what i wanted to know is that can the J1IIN cancellation of excise invoice be shown in the SD document flow. If yes then please let us know the note number to be applied to it.
Thanks & Regards
Edited by: Aniruddha B Mahalle on Feb 16, 2012 8:07 AM

Document flow reference from ECC invoice to mySAP CRM complaint to be made

Hi,
I am using a BAPI program to create complaints in the mySAP CRM system; however the complaints have to be created with reference to invoices that are residing in the back end ECC system.
Since the complaints are not being created using the GUI, I cannot establish the doc flow while creating the complaints.
Is there someway I can make some table entries, etc... so that when I create the complaint in mySAP CRM using the BAPI:
1. I can see the invoice in the document flow as the preceding document
2. The reference of the line items from the invoice is also available in the relevant fields in the complaint line item (fields such as invoiced qty, net value, billing doc number, billing line item, etc)
Kindly advice on the same. Thanking you in anticipation.
Warm regards,
Dhaval.

> See if the below one answers your query.
>
> Go to SPRO -> Financial accounting -> FA Global
> setting -> Company Code -> Multiple currencies
>
> See if anything is activated here.
>
> Raj
>
> Reward points if helpful
Hi Raj. Here i see the following settings :
1) Define additional local currencies. Here is only 1 company code (not mine) with settings.
2) Define additional local currencies for ledgers. Here is a setting saying ;
Ledger =0, Summary Tabel =GLT0, Valuation =Legal valuation, Second Currency =Comp.Code currency, Third currency =Group Currency.
I have no idea whether these settings have anything to do with my problem. I had more the feeling that it is an error in the document flow program.
When you know more i would appreciate your info. Thanks. Ed

Revenue Document Not visible in Document Flow of Billing Document

Hi Friends,
I am facing the below issue Only in Quality System.
From with in the Billing Document when click on "Accounting Overview Button" (i.e. Shift + F4 Key), list of Accounting Documents are Displayed.
In Development:
I am able to see 4 Documents when I click on the "Accounting Overview Buttion" :- Accounting Document, Profit Center Document, Controlling Document and Profitability Analysis document.
In Quality:
I am only able to see only 2 Documents when I click on "Accounting Overview Button": Accounting Document and Profit Center document.
In Quality System, when I checked KE24, I could see that Profitability Analysis Document has been created but the same is not visible in the Document Flow.
I did not check the Controlling Document, because I was not aware how to related it to the Sales Doc or Billing Doc.
I have also checked the following OSS notes: 877921, 453772 and 545505. Correction suggested in this OSS note are already implemented.
Thanks in advance for your help.
Regards,
Raj.

Hi,
based on the sample coding I think that some more data needs to be passed in parameter lt_files. I would recommend you to see the BAPI description in transaction BAPI for the DOCUMENT_CREATE2 BAPI and made sure that the necessary data for
BAPI table DOCUMENTFILES are also handed over correctly.
Best regards,
Christoph

Excise doc in document flow

Similar Messages

Maybe you are looking for