Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Similar Messages

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

Revenue values are not flowing into COPA

Dear Experts,
We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
May I know the exact reasonu2026.
Please suggest me in right wayu2026.
Regards,
Balaji Bhonsle.

Hi Balaji bhau
I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
See if the Billing Type has been entered in KE4W and the VF reset for it
Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
br, Ajay M

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

Hi,
We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
We are configuring for the MM-SUS Scenario.
Now,to accomodate the Tax / Pricing we have installed the add on
component LOCINSUS and we are having doubts on how to use it:
1) Tax and pricing information are not flowing into IDOC- orders02
(e1edp04 and e1edp05 segments are not present in the created IDOC). The
condition print indicator in checked on ECC System and we have also
implemented SAP note 995986.
2)In create ASN transaction , we are not able to see the Excise Invoice
Number and Date field in Basic data tab as expected from SAP Library
document although we have installed the Localization Add on component.
Please help us to reso1ve these issues,
Regards,
Mani
099890-22217.

Mani,
Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
If you did resolve this issue could you please let us know how, much appreciated.
Bill.

Customer receipts and payments are not flowing into PS module

Dear Team,
I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
Thanks !!!

Sagar Kapadia wrote:
> 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
> 2) Is there any word of caution which needs to be kept in mind at the time of activation?
> 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
>
Only one pre-requisite is the creation of FM area.
As I suggested earlier, please read SAP help which will answer all your queries.
Please follow the below path...
SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

Why Material Classification Changes are not shown in MM04?

I have a material; I changed classification data by changing a value of a
Characteristic, e.g. unit of measure for reporting. It had allowed values of
No entry, mg, kg.. I changed it from No entry to mg.
However when I went to MM04; I do not see the change; why. I know
When I make changes to non Classification data; I can see changes in mm04.

Hi,
I'm afraid you can't see these changes in MM04.
MM04 does not show the changes of classification of the material master only the changes of fields which directly belong to material master. You can get the classification change docs in the classification screen: menu Environment -> change docs.
Also note that Changes to the values of characteristics are not recorded in material master changes. These values are stored in the classification tables and if you want to track changes of them, you have to use engineering change management.
Thanx & Regards,
Mauro
Edited by: Mauro Bianchi on Aug 24, 2010 11:42 AM

Changes are not reflected into SEM-BPS 1 layout.

Hi,
1st, I've included code in SAPAfterDataPut that copies data from SEM-BPS 1 into New Sheet.
Now, I've inserted a method in the sheet module of New Sheet. This method takes care of reflecting changes from New Sheet into SEM-BPS 1 layout. but, finally am not getting changes back to SEM-BPS 1 sheet.
I've tested this in excel (outside of BPS) and it works fine.
in BPS, I went into VB debugging mode (after inserting a break point) and I can see that change that has been made in New Sheet was reflected back to SEM-BPS 1. But, when i test the same out of debugging mode, am not getting the same result.
Looks like,after changes in New Sheet, SAPAfterDataPut is again being executed and is overwriting the changes that I made in new sheet.
Do i need to inlclude code only in SAPBeforeDataPut to reflect changes from new Sheet into SEM-BPS 1?
In excel (outside of BPS), this method works in such a way that, as soon as i make changes in Sheet2 will get reflected into Sheet1 without runnning any macro.
but, with same code, this doesn't work in BPS. (instead of reflecting changes to SEM-BPS 1, changed value in New Sheet is reverted back to original value that is same as the value in SEM-BPS 1)
Appreciate any ideas/thoughts on this.

Hi,
Usually you work with a second sheet in the following way: write a macro that copies the data from the SEM-BPS 1 sheet to the new sheet. In order to run that macro include it into the macro "SAPAfterDataPut" and set the flag in the check box of in the popup of the third screen of the layout builder. The system will call the macro after the data has been written to the sheet SEM-BPS 1.
There is a second predefined macro that the system will executed provided that the flag is set on the popup in the layout builder. This macro is called "SAPBeforeDataGet". It is called before the BPS reads data from the SEM-BPS 1 and should be used for transferring the data back to the first screen (similar to the coding you have done in SAPAfterDataPut). Using this macro should solve your problem.
I did not understand how the changes are transferred from the new sheet in your (stand alone) case. Unfortunately it sometimes does make a difference if you test a macro in a stand alone Excel or in the Excel inplace. Some features are disabled in Excel Inplace (by Microsoft!!).
Best regards,
Gerd Schoeffl
SAPNetWeaver RIG BI EMEA

AED and SED values are not flowing into Order

Dear Gurus,
We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
Any answers are most welcome.
Thanks and regards.
Venkat - Hyd.

Hi,
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

Material Master changes are not allowing (MM02)

Dear All,
we have done year end activities successfully for the 2010 fiscal year. we are following January to December. In 2011 January 9th date we have activated Material ledger. after that when we try to go to material master the system is giving this error.
"Currency was not defined at production startup
Message no. C+040
Diagnosis
You have set the material ledger to productive in valuatione area DEL1. Nevertheless, information about the currency settings at the time of production startup are missing.
System Response
The system cannot ensure data consistency, since it is not possible to compare the current currency settings with those made at production startup.
Procedure
1. Make sure that the currency settings have not been changed since material ledger production startup in valuation area DEL1.
2. Inform your system administrator."
Even when I try to create the new material master it is showing the same error.
Could anybody guide me how to solve this.
Thanks and regards,
Mr.Rao

Hi Mr Rao ,
Your ML currency settings are incorrect .. which is causing the issue..
A . Have you checked the following notes which give a detailed information about Material Ledger activation: 596558 Material ledger production startup 384145 Advice note on material ledger production startup 165844 Material ledger production startup Please, check attached note 596558, which provides recommendations on Material Ledger production startup: ...before ML activation .. i hope not ..
B Always activate the material ledger for a complete company code and copy all currencies from FI. This is the only way to ensure the reconciliation with FI. c) In addition, it is recommended that you activate the material ledger for a complete company code because the invoice verification can neither store invoices that contain materials from plants the material ledgers of which are active nor more materials from plants the material ledger of which is not active. ... Please, consider that only transactions performed after the startup will be taken into account for the actual price calculation.
C .Now to correct it .. you have to deactive ML and correct the currencies and then re-activate ML . Have a look into SAP : Note 53947 - Changing currencies after production startup. Now , are e the actual activities now posted and production is active .. if yes .. the deactivating ML is a pain.
D .If the Material ledger is already set to u201CProductiveu201D, run the report SAPRCKMJX using SE38. This report should only be run in Development or Testing environment. It is not recommended to be used in Production. It may be used in case there is no activity in the plant (no stock, no movements have happened ever). SAP recommends use of their CO-PC development support for this (OSS Note 108374).
Please revert back for any further clarifications
Regards
Sarada

Items are not flowing into the second master page.

Hello,
any help on this is really appreciated. this is the situation. There are two master pages. I have created a flow content subform. And within this, i have created a position content subform. Within this, i have the different fields of an item level table. There are a total of 14 records. three pages are used. And all the three are the first master page. The second master page is not being used. I have tried many ways, but could not suceed. Could any one out there suggest a way to solve this problem?

Hello,
I'm facing a problem here. Within my print form I have one master page.
Basically I have a dynamic table which must be followed by a standard text.
So I've created a subform (flow content), in it I have another subform (flow content, table): in it one subform (flow content, table row) and a subform (position content with my text).
Although all the 'allow page breaks' are checked, the issue I have is that the second page is never printed...

Sub Contracting Values are not flowing in to COPA

Hi,
PP guy has run Sub-Contracting scenario, later when i see the postings in COPA, those are not flowing into COPA. Amount is showing only in FI.
510085 Consumption - Subcontracting =800
520085 Inventory Change - Subcontracting = -5800
How to bring them into COPA report. Please advise me..
Thanks
KB

Add those cost elements to the automatic account assignment table (t-code OKB9) ans click the profitability segment assignment box. If using cost based COPA, assign these cost elements to a PA transfer structure (KEI2) so that they are assigned to the correct value field.
thanks,

CVD & ADC not flowing into MIGO.

Hai all,
For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, CVD & ADC values are not flowing into MIGO ( it should be shown in BED & AED ) respectively. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?. Please throw your lights

Hi,
Please check J1ID, whether we have maintained material and chapter id combination and cenvat determination. Secondly check the MIRO no. you are entering while doing MIGO. Sometimes it happen, that the miro number entered during MIGO different that of actual MIRO.
Ishu

Item line data not flowing into SAP Adobe form layout

Hello Gurus,
I am currently working on adobe form layout for a sales document in SAP, i have created a master page
as well as a couple of pages in the design view. Data at the header level are working properly, but the item data
are not flowing into the layout, as nothing appears in the print preview for the item level of the sales document.
I have done all the necessary binding with all the right field names, my subform to the best of my knowledge seems to be well
defined, but yet to no avail.
I would like to know what yet could be the reason for this issue and how i can go about fixing it.
Thank you.
Ahm.

Hi Vijai,
In our project, we have the same requirement but I am one step behind than you. I am able to generate the PDF form but not able to generate the data. Means all the fields are coming as disabled fields.
Can you please send your code as a sample code so that I can have a look at that and check where I am doing wrong/missing. My id is sandeep.kamdar in gmail
Thanks & Regards,
Sandip Kamdar

Material delta changes are not flowing into CRM

Similar Messages

Maybe you are looking for