Excise duty is not coming

when i am trying to capture excise invoice for import PO the BED AED and HECS is not coming is it due to any patch or something else BCOz the same is working fine in development client but not working in quality client

Hello
Goto SE09 and check whether all the CIN customizing requests have been transported from DEV to QAS.
Regards

Similar Messages

Excise duty are not coming in utilization

Dear All,
Some excise invoices are not coming in utilization (J2IUN), what possible reaosn is there and how I can
resolve this. Plz advice.
regards,
SP Shukla.

Hi
In J1IS transaction code first give all details like
1) Ref document type
2) Doc Number
3) Doc Year
4)Series Group
5) Excise Group
6) vendor or customer press enter
then click on insert line (shift +F6) fill all the fields now .
Thanx

Excise duty is not coming at the time of J1IIN in stock transfer

The value of BED, CESS is coming Zero while creating Excise Invoice for Stock Transfer. I have maintained all the default condition types. I am using STO Proforma Invocie, Excise duty is coming in STO Proforma Invoice.
I am using TAXINN.
Regards
Gaurav

Maintain pricing (TVAP-PRSFD) as X in VOV7 for your STO item category.
Regards,
GSL.

Reg Excise Duty is not coming in the Excise invoice

Hi all,
We are doing STO senerio between two plants while doing commercial invoice the EXcise Duty ZMOD and ZCES is determining in the commercial invoice but when we do the Excise invoice in J1IIN the ZMOD and ZCES values are not comming.
So can you please assist to over come this issue
Please give replay ASAP,
Regards,
Murali.

Hi Alpesh,
Thank you for your replay I already checked that the A/R BED,SED CESS condition types are maintaining to that Tax procedure.
Can you please assist
Regards,
Murali.

Excise duty is not calulating

Dear All,
if i am creating sales order excise duty is not calculating.there is message which is i'm getting.No add. Vendor / Customer data maint. for -Please maintain J_1IMOVEND.
Regards
Ajit Jaiswal

in customer & vendor where we maintain Excise tax indicator.
Go to J1ID, select "Customer Excise details" and execute. There check whether the customer code is maintained there. If so, drag your mouse to right side and check "1" is maintained under the tab "Declared".
thanks
G. Lakshmipathi

I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
we are not going through SD configuration and I mentioned evrything in Tcode J1ID

Chek SAP Note 951938 is applicable to you
Regards
Sanil Bhandari

Excise duty @10% not displaying in printpreview----SAP INVOICE

Dear experts,
Here in Sap invoice Excise duty @10% is not displaying in the printpreview. I tried debugging in Report program, but couldn't able to find the solution. so please give me the solution with step by step, Because am new to this one.
Thanks & regards,
selvakumar.

Hi ravi,
   Yes ofcourse am using smartform, Here in billing document(invoice) printpreview. there are some excise columns like edu cess,vat and all. The same ''excise duty @10%'' and the value of the excise duty also not displaying in the billing document printpreview.....I have debugged smartform nothing wrong with smartform. So there amy be some problem with the abap editor.
I have the conditions like Wa_final-exp ne intial
                                         Wa_final-fkart ne 'yrmf'
                                          Wa_final-fkart ne 'yctf''.
please let me know what is the problem in it.
Thanks & regards,
selva....................

Excise Duty is not gettig posted in accounting doc

Dear Experts,
In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

Dear Prashant,
Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

Excise duty values not floating to J1IEX_C

Hi all,
I created a PO with all Excise duties like BED, CESS, SECess etc..
When i try to capture the excise invoice i can see only Ecess and SEcess but not Excise duty( JMOP )
We are using TAXINN and duties were maintaiend thro FV11.
How to fix this.
Pl reply
Thanks
A.Gururajan

Check weather it comming for other material
if not comming
than check
check what is the condition type for 100% bed it would be JMX1
check in po if JMX1 is having value
IF value not there then chec ur tax procedure is the calculation is correct or not
if value coming
check in Maintain Excise Defaults
A/P BED cond should have JMX1
also check Classify Condition Types
TAXINN JMOP BED Set Off condition Percentage
TAXINN JMX1 BED Set Off condition Total
this 2 entries should be there
hope this helps

Excise invice -values not coming

i have create billing & accounting doc is generated -bed /cess are posted.
but when i'm creating excise invoice with ref to billing bed /cess values are not coming in excise invoice
J1IIN
pl SUGGEST

Hi
Please check in your billing document against all your excise condition types you have duty values.
If billing document does not contain duty values then obviously system will not bring the duty values in your excise invoice (J1IIN).
If you have duty values in your billing document then still excise invoice is not copied to your excise invoice then please check the below customization setting:
MG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults:
Here ensure that all your excise condition types are properly maintained for your TAX PROCEDURE.
Example if you are using JEXP-BED, JECS-ECS, JA1X-SeCess condition type in your pricing procedure.
Then check you have maintained as follows:
BED COND (A/R BED)..........JEXP
A/R BED Perc (BED Perc)......JEXP
A/R ECS Cond..........JECS
A/R ECS Perc ..........JECS
A/R AT1 Cond...........JA1X
A/R AT1 Perc............JA1X.
The above setting is required only if you are using percentage condition type. If you are using both percentage and Total condition type. Then it has to be classified as below. JEXT-BED JECP-ECS and JA1Y-SeCess.. These are total condition types.
BED COND (A/R BED)..........JEXT
A/R BED Perc (BED Perc)......JEXP
A/R ECS Cond..........JECP
A/R ECS Perc ..........JECS
A/R AT1 Cond...........JA1Y
A/R AT1 Perc............JA1X.
Regards
MBS

Excise Duty is not captured in MIRO

Dear,
When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
Please give us solution.
Br,
Swapnil

hi,
have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
Regards,
mukesh

Excise Amount is not coming automatically.

Hi,
I have done the configuration for Excise but system is not calculating the Excise duty, automatically.
I have done configuration as Condition type JM01 in tax procedure, asssigned value in FV11 and tax code 100% and given the 16% in J1ID.
1) When I make a P.O. it shows me the % of ED JM01 as zero and not 16%.
Then system is reflecting the % of the ED under "Specific" when capturing the Excise Invoice but not the amount.
In J1ID, under "Excise tax Rate" tab there are two columns "Excise Rate" and "Excise Rate Duty". When I give 16% in "Excise rate Duty" column then system is showing me the 16% under the "Excise duty" tab of the Excise item under "Specific" ED.
2) Where I am doing a mistake or what are the steps shall I configure so that
- ED % should show 16% in P.O. instead of zero
- I give the 16% under "Excise Rate" and it sholuld show me the duty while capturing ED under "Ad Valorem" option?
- System will calculate the Excise duty amount
Please suggest....
Thanks and Regards
Nitin

Hi,
Please tell me where am I wrong as I am trying but nothing is working out...
1) Tax Procedure TAXINJ
2) Excise % in tax code 100%
3) FV11 - 100%
4) J1ID- "Excise Tax Rate" tab under 'Excise Rate' 10 %
I want to calculate 10% excise duty but neither the % nor the amount is being calculated but when I put in the amount manually then system is picking up the details and posting the correct Excise invoice and taking details in MIRO.
Please suggest....
Also, I have tried with ...
1) Tax Procedure TAXINJ
2) Excise % in tax code 10%
3) FV11 - 10%
4) J1ID- "Excise Tax Rate" tab under 'Excise Rate' 10 %
Same result, the accounts are hitting correctly when posting excise invoice or MIGO if I give the % for BED, AED or SED but system is not taking the correct %
Please suggest .....
Thanks in advance
Regards
NItin

Excise Duty is not calculating in Export Excise Invoice

Hi Experts,
Please help me out to resolve below scnerio:
When Client is creating a domestic Excise Invoice by Tcode J1IIN, then BED, Cess & HSCess is calculating properly. But in case of Export Excise Invoice by J1IIN only BED calculation is displaying, Cess & HSCess value is not coming. Kindly guide me how can i resolve this issue. Also explain me the exact process of Export Invoice with Excise configuration.
Regards
Mahendra Mhatre

Hi Mahendra,
I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement. But, in SAP the same should not be posted in any of the excise tables. I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice. Can you please speak to the SD consultant.
Hope this helps.
Vikas.

SED (Special Excise Duty) column not available in J1IJ (Depot Excise INV).

Hi
I am creating Depot sale scenario. while creting Depot Excis invoice through J1IJ t-code there are column like BED,AED,ECss,SHEcss but there is no column for SED (Special Excise Duty). In my scenario I need to capture the SED .
I am able to capture the SED in RG23D register for Receipt part but for Issue part I am not getting this SED.
Please help.
Regards
Sivakumar

Hi,
Check again, There is a column for SED next to BED in J1IJ screen also.
Regards,
Brinda

Excise Duty Group not being populated during VL09 in MSEG-ROITAXGRPtable

Hi,
When we do the PGI (601 movement type), the data gets updated in MKPF & MSEG tables.During this process the details pertaining to ED group(field ROITAXGRP) are not updated in MSEG.
The above factor has the following connection to 602.
Subseqently when we do VL09 - the data pertaining to PGI (601) is imported from MSEG & hence ED group does not get populated as the system takes the material document of 601 to reverse the delivery document
We need to know the following things.
1. When we are doing delivery (Movt type 601) ,excise duty group gets updated in which field and table?
2. When we are reversing the document why in the MSEG table ROITAXGRP field (Excsie Duty Group) not getting updated.
3. Is there any User Exit which can be usd to populate this . We are using version 4.6c (IS-OIL) version ?
regards,

Thanks,
K.Kiran

Excise duty is not coming

Similar Messages

Maybe you are looking for