Excise Duty not calculating

Hi Friends,
I am very new to MM, I have a problem in the pricing for one my PO in ME21N. The excise condition type is not getting calculated.
Can someone please guide me where to go and check the pricing proceudre for MM. Pricing procedure used in TAXINN and condition type is JMOP (BED Setoff)
Regards,
Wasim.

Hi,
Check the tax procedure in following path
SPRO -- > Financial Accounting(New) -- > Financial Accounting Global Settings (New) -- > Tax on Sales & Purchases -- > Basic Setting-- > Check Calculation Procedure-- > Define Procedure
Also check the tax code used in PO and related condition types{like example one condition type JMOP (BED Setoff) with other condition types} used for tax code.
Regards,
Biju K

Similar Messages

Excise Duty not calculated at MIRO

Hi
We have upgraded the patch level of SAP_APPL from 10 to 11. Now, in PO we have assigned a tax code for calculation of excise duty at 14.42%. In the tax details in PO Items, system is showing the calculation of excise duties correctly.When the excise invoice from vendor is posted through J1IEX . Here the system is passing the entries
BDE Dr
Cess Dr
SECESS Dr
       Cenvat Clearing A/c Cr
When we do MIRO, system is passing the following entries
GR/IR Dr
     Vendor A/c Cr
The correct entries to be passed shoudl be
GR/IR Dr
Cenvat Clearing Dr
         Vendor A/c Cr
When we were on patch 10 for SAP_APPL, system was passing the entries correctly. However, after the upgradation, system is not capturing the excise details. We have maintained all the related configuration in J1ID and also maintained the condition records in FV11.
Regards
Sanil Bhandari

Hi,
Check whether "GR based IV" is active for the PO line item under "Invoice" Tab. If not then active and check or do a complete new cycle with this indicator as active and check.
Also check that in MIRO, you are selecting the tax code of PO at Header level in "Basic Data" Tab also.

Excise duty getting calculated on freight value

Hi frnds,
I have an excisable material and the freight charge (FRA2) for this material.Tax procedure is TAXINN.
My issue is - during MIRO the excise duty is calculated on the material as well as on the freight charges. My client does not want excise duty to be calculated on freight charges.
Do I have to look the config for pricing schema or anything else.
Need your advice...
Regards,
Sachin Narvekar

Hi,
As per taxation , on Freight there will be always Service Tax, so create a Service Tax code and assign in MIRO with Planned Delivery Cost. If your vendor is same for material as well as Frt, if possible create a new vendor code for Frt as service vendor.
Rgds,
Vikas Mayekar

Excise duty not capured..?

Hi gurus
Can anybody giv some inputs..
I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
In this case how can i capture the excise duty after MIGO..?
Please explain me some inputs..?
Thanks
sap-mm

Hi,
You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
regards.
prasad

Excise Duty Not appering in GR

Dear all ,
Excise Duty Not appering in GRn for PO ,what may be the possible reasons ?
Pl guide

Hi,
Pls check the J1ID
1. Material maintained in J1ID for that plant
2. Input and output material declared for the plant
3. Vendor excise maintained
4. Excise indictaor for the vendor maintained
5. Plant excise details maintained in J1ID

Excise Duty Not geting calculated in Export excise Invoice

Hi;
As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of bond Value.
Kindly let me know what kind of data is missing.
Avinash

Hi Avinash,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare

Excise duty not getting calulated in MIRO

Dear MM Gurus,
User has caputured an excise invoice and entered a GR with reference to the excise invoice and posted excise invoice
then user has reversed GR and without reversing(ie cenvat posting),he has made the GR.
Then he has posted cenvat (part-II)
Now during Miro,excise duty amount is not getting calculated
also excise invoice shows, duty credit is not availed but it is inventorised.
How to take credit and post MIRO ?
Thanks & Regards,
S.S.Reddy

for excise calclated in miro
check entry in
img-logistic general-tax on good movement-india-basic setting-determination of excise duty_-maintain excise default_
check urs tax procedure & condition here

Non modvatable duty not calculated in invoice tab of PO

Hi expert,
We have recently updated application support pack (SAPKH47030) on our enterprise version and facing following problem -
One tax code for 2% CST bearing JM02 condition type (TAXINJ) and assigned with accounting key NVV having 100% mention within the same used into PO for a plant in which Modvat is not avaialble.
No excise duty is being displayed into field TAXES of INVOICE tab of PO. (all conditions for excise duty i.e. JM01, JM02 and relevant cess and HEcess components are ZERO).
I request you all experts to suggest the solution.
workable solutions will be suitable rewarded please.
Regards,
PAwan Khurana

Hi,
The Problem seems remains again.
At that time I have checked with a purchase order which was basically a STO where the PO was created for another company code ( it was a PO for inter company code STO) asking for a material from my company code.
There I found the Tax is working. I mean condition values were calculated/displayed along with condition percentage as mentioned in previous mail.
But whenever I create a PO in my own company code for the procurement of material from outside vendor to my plant this problem occurs and the problem still persist.
While I thanked you I have checked only with STO and could not check for other PO.
is there any problem persist in my Company code setting ?
So please tell me what can I do for ther actual solution.
N.B. I have not checked " Statistical" to BASB. even at that time also.
Regards,
Amit

Excise duty not reversed even after Excise Invoice is reversed

Hi Experts,
Please give me solution for excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is reflected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
The cancell invoice should not appear for duty payment statement in the J2IUN.
Rgds
Shailesh W

Hello Sir,
I will provide u further details for this Issue.
This is to inform you that excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap & fresh Inv no 1000200214 dt. 06.09.10 is prepared .We have noticed that in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is refected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
As per our understanding,the cancell invoice should not appear for duty payment statement in the J2IUN.
You are requested to check the same at your end and let us know the reason for the same.
We are post the excise document in month of april 10 vid doc. no.10000021 dt. 02.04.10 7 10000057 dt. 10/04/10 and same is reversed vide do. no 1000074 dt. 02/04/10 & 25000003 .
While arriving the duty payble amount, we are found following discrepancy in J2IUN (Z-Report) & FBL3N (G.L) Account
Duty payble fig. As per J2IUN Rs. 9482.00 (Basic)
Duty Payable Fig. As per FBL3N Rs. 7247.00 (Basic)
Diff. Rs. 2235.00
The diff. due to reversal of excise posting document not a/cted in J2IUN Report.
Rgds
Shailesh W

Excise duty not determined in goods receipt with reference to PO.

Dear All,
I am implementing Condition based CIN. I have created PO and maintained all excise duties in XK11 transactions. Excise duty has determined in PO. But When I am creating MIGO with reference to PO the excise duty is not copied from Purchase order.
Please suggest.
Thanks & Regards

Dear All,
If you have any idea, Please let me know.
Thanks & Regards

Excise Duty not updating in Billing & Excise Invoice

Dear SAP Guru,
Kindly help me to solve 2 issue as mention below :
1. Excise duty is not flowing in my billing document when i am creating commercial invoice. Also in my excise, I am getting excise duty 0.
2. When i am creating commercial invoice, the net amount is showing me in dollars but at the time of creating excise invoice it should show me in Rs? Which is not happening.
Please guide me what are the setting i have to check to fix my problem
Thanks in advance.
Also kindly send me the CIN Configuration along with the snap shot to my email id : [email protected]
Thanks & Regards,
Rajan

> Dear Lakshmipati,
>
> Plant has been specified in the SO but still excise
> duty is not flowing to my document.
>
> Thanks
>
> Rajan
Dear Rajan
You can check in the following
1) In J1ID, select "Excise Tax Rate" and ensure that for the chapter ID, you have maintained 16%
2) In J1ID, select "Excise Indicator for Plant" and ensure that for the combination of Company Code and Plant, "1" is maintained on the extreme right side.
3) In material master, select "Sales: sales org.1" and ensure that "1" is maintained for "Tax Category - JTX1".
Thanks
G. Lakshmipathi

Excise Duty not capturing in invoice

Dear all,
All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
Regards,
Raziq

Hi Raziq,
When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
In this system will show the Excise Duty and it will post the below accounting Entry:
BED Dr
eCess Dr
HECess Dr
CENVAT Clearing Account Cr
Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
Please let me know if you are following above approach or not.
Br,Vivek

Excise duty not loaded onto inventory for non excisable plant

Hello
I am facing a problem in excise duty flow. I have two plants, one excisable and second non excisable. one vendor is supplying the material to both the plants, so vendor is sending the invoice having BED, ECess & SECess for both the plants.
For excisable plant all the duty values are flowing correctly, but for non excisable plant BED is getting loaded onto inventory.
For non excisable plant, I have maintained conditions records al plant level for JMIP (BED Inv %), JMX2 (A/P BED Inv), ZECN (IN:ECess Inv %), JEC2 (ECess Inv Total), JSEI (IN: A/P SECess Inv), JHX2 (IN: SECess Inv Total).
During MIRO, BED is not getting loaded onto inventory, while ECess & SECess is getting loaded to material.
Pl suggest, where to check the settings or any settings for condition types, tax procedure etc.
Thanks & regards'
Manoj Gupta

Hi,
The system behaviour of posting to stock account is controlled by account key NVV. Go to OBQ3, in your tax procedure TAXINN (or copy of that procedure) check for the condition types which account keys are assigned.
System will never discriminate that BED is not getting inventorised but ECess and Hcess on BED get inventorised.
Regards

Excise invoice - basic excise duty not appearing

Hi,
I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess.
I am using TAXINN.
In accounting document, basic excise duty, education cess and secondary education cess are appearing.
Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
Regards,
T Saravanan

Dear Saravanan,
Already our friend MBS suggested in detail to that
Please check the configuration settings in the IMG through this Path
IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
Is this first time you are trying to create excise invoice or recently you are getting this issue.
If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
If all settings are perfect then you can raise the OSS note to the SAP people.
I hope this will help you,
Regards,
Murali.

Excise Duty Not to be Collected from Customer

Dear All,
I require help in a scenario, wherein company has already paid excise duty
to produce the goods but does not collect it from the customer for any
footwear pair which has been priced less than 250 Rs.
The company wants excise to appear in the sales invoice so that excise
invoice can be captured.
Require your suggestion in configuring this scenario.
Thanks and Regards
Adithya

You have not indicated what will happen if the price is above INR 250.00.
If the requirement is excise should not be collected only if the value is below INR 250.00, then, through standard it is not possible. Through exit you can control this. On the other hand, if you dont want to debit the customer for excise duty irrespective of invoice value, then set the excise condition type as statistical, so that excise invoice can also be generated.
G. Lakshmipathi

Excise Duty not calculating

Similar Messages

Maybe you are looking for