Excise invoice - basic excise duty not appearing

Hi,
I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess. 
I am using TAXINN.
In accounting document, basic excise duty, education cess and secondary education cess are appearing.
Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
Regards,
T Saravanan

Dear  Saravanan,
Already our friend MBS suggested in detail to that
Please check the configuration settings in the IMG through this Path
IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
Is this first time you are trying to create excise invoice or recently you are getting this issue.
If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
If all settings are perfect then you can raise the OSS note to the SAP people.
I hope this will help you,
Regards,
Murali.

Similar Messages

  • CIN-India, Excise Invoice, qt updated but not the value (BED,Cess)

    Hi All,
    I am working on CIN-India-Implementation.
    I am creating the Excise Invoice, but value is not capturing, showing Zero (Value not capturing in J1IIN,but quantity is captured).
    In Customer Master and Material Master I have taken Tax Classification JCST,JTX3,JTX4,ZVAT-Fully tax.
    In Pricing Procedure I have taken JEXP(BED), JECS(Cess), JA1X(HCess), JCST, ZVAT
    Excise Group Z1 and Ser Z1 in J1IIN.
    Till Billing F2, everything is perfect-Price Tax, Excise but when I create Excise Invoice J1IIN-no value is captured.
    Kindly let me know, I have working on  this since Yesterday and chked the forum, but not got any positive matter.
    Kindly treat this urgent.

    Hi
    Request you to please once again check the CIN Settings.
    Probably go back and check whether you have correctly mapped the excise condtion types in Spro > Logistic General > Tax on goods Movement > India > Basic Settings >Determination of Excise Duty > Condition Base Excise Determination > Classify Condition Types.
    Here you have give your pricing procedure and the Condition type with it's use.
    Check if you have correctly mapped the condition types.
    Thanks
    RB

  • Excise invoice  Internal document number not populating.

    Expert,
    In STO  supplying plant Movt-351  document posted , J1IS  EXcise invoice  has done ,here while saving the Excise invoice  Internal document number not populating.
    But number  ranges  (J_1iexcloc ) is done correctly against the year.
    Logistics->Tax on Goods Movements->India->Tools->Number Ranges.
    This is urgent Tickets ,can anyone  help me out ?
    regards,
    kumar

    Dear prasanna ,
    Official  excise document number in quality server is  populating perfectly,where  as prod server not populating , in quality server  object is  J_1IEXCLOC ,same object assigned to  prod server . i did not assgined  J_1IINTNUM object in Quality server.
    why its not populating ?
    thanks
    kumar

  • Posted Excise duty not appearing in MIRO

    Hello folks,
    We are capturing Excise invoice in MIGO and then as per the vendors
    excise invoice we change the ED in the captured excise invoice and then
    post it. We have noticed that in some cases the exise duty posted in
    J1IEX is not the same which is appearing in MIRO. first we assumed that
    it is appearing only for the changed items, but then we found this is
    only in case of some invoices and not for the all invoices of those
    items.
    please let me know what to do.
    regards
    Ashish

    Why do you change excise duties while posting ? Vendor is a dealer ??

  • Excise Invoice:difference in duty calculation while calculating ECS& SECS

    Hi All,
    There is a difference in duty calculations in excise Invoice, (1) which is generated automatically while creating billing doc manually ) &  (2) generating billing doc & excise invoice in PRG.In PRG Billing doc is getting generated by BAPI 'BAPI_BILLINGDOC_CREATEMULTIPLE" and Excise invoice by BDC for t-code J1IIN.
    What is the difference?
    While calculating ECS duty & SECS duty , AED amt should be excluded. Accordingly billing document pricing procedure was set and was working properly in both the above cases(1),(2).
    But standard Excise Invoice tax procedure TAXINN,which is assgined for  Excise Invoice there is difference in calculations manually & by PRG using BDC
    Thanks in advance
    Rayudu

    Hi Mahendra,
    I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement.  But, in SAP the same should not be posted in any of the excise tables.  I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice.  Can you please speak to the SD consultant.
    Hope this helps.
    Vikas.

  • Excise invoice for CR/DR  note

    Hi all
    How to configure  excise inovice creation for  Billing type  L2/G2
    Document flow is  sale order (CR/DR) --wotout delivery  :billing creation wtih reference to sale order  (G2/L2)
    but with reference to G2/L2
    billing type not able to create sale order .

    It is nothing but retro billing in which case, you need to create a new pricing procedure and assign the same in OVKK.
    So while generating retro billing via VFRB, duty will be considered for the difference in value for which, customer has to pay.
    Parallely, instead of creating excise invoice, you need to post the difference ED via J1IH.
    thanks
    G. Lakshmipathi

  • Excise Invoice (J1IIN) Cancelltion did not update RG23A Part-II

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    Hi,
    1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
    2)If you are following TAXINN,Then u should maintain Tax code to Company code.
    If u are Using TAXINJ,U should maintain Excise Defaults.
    3)In Excise Group,U should Activate MIGO transactions.
    4)Check ur TAX code,Tax code is Deductable or non dedctable.
    Raghu

  • Excise invoice taxing values are not getting updated

    Respected Members
    I have created a sales order and and done the billing and while creating of billing it creates excise invoice.
    Problem is that billing document and accounting document showing the values of BED and taxes but when we go to tcode j1iin and see the excise invoice ,it is not updating the values of tax there.
    There it is showing zeros everywhere in BED AED NCCD etc.
    Please help me out to solve the issue as soon as possible.
    I have copied the pricing procedure TAXINJ to TAXIND and set the values .
    Please tell me where where i have to check the configuration for solving the issues.
    Thanks a lot
    GIve your suggestions as soon as possible.

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Excise invoice done with ZERO, not able to cancel.

    Hi Everybody,
    Client has done PGI with ZERO quantity also done billing & even done Excise invoice with Zero Quantity & Zero value. Now if i go to cancel that cancel invoice in J1IIN it is not allowing to cancel & not even displaying.
    That Invoice does not carries any value but even then client wants to cancel that exc inv number.
    How to cancel the Excise Invoice?
    Regards,
    Vijay

    Client has done PGI with ZERO quantity
          also done billing
    if i go to cancel that cancel invoice in J1IIN
         it is not allowing to cancel
    If your copy control is in line with standard settings, first of all you cannot post the goods issue without any quantity and also generation of billing is not possible.
    Coming to your second issue, please try in J1IH instead of J1IIN.
    thanks
    G. Lakshmipathi

  • Excise Invoice No. from Delivery Note in GR

    Hi..
    We enter Invoice No. in 'Delivery Note' field while posting GR and after we do capturing Excise invoice w r t GR in J1IEX.
    Is there any setting to get 'Delivery Note'  number flows/copied into 'Excise Invoice No.' in J1IEX.
    or
    How to it can be achieved technically.
    Thanks in Advance..
    Regards
    Sumit

    Delivery note number and Excise invoice number both are different. There is no such setting available in Standard SAP system to copy the Delivery note no. into Excise invoice field in J1IEX.
    If you have any such business requirement, you can try writing custom code using User exit or Badi or Enhancement and fulful your requirement.

  • For Dealar's Invoice MRP indicator is not appearing in J1IEX

    Dear All,
    We are trying to capture the the Dealar's Invoice through J1IEX,
    in po Rate is maintained as per Rs 100 and VAT 4% and then GR is made for the same without captuing any excise in MIGO.
    and then we are tring to capture and post this excise invoice in J1IEX but system is not showing MRP indicator to facilitate mannual entry of excise values,
    and for this we have maintained all the J1ID master data.
    Please suggest
    Vimlesh

    Dear Vimlesh,
    The purpose of MRP indicator is to change the grn value, which maintion in po.
    i.e if your po price is 100, then your grn valu should be (100- exicse value).
    Now if you already done grn, & then you go for capture the excise in J1IEX, then purpose of MRP indicator is useless, thats why its not coming during capture w.r.t GRN.
    MRP indicator is reflecting only during GRN in MIGO if you capture excise  or capture excise w.r.t po in J1IEX before GRN.
    Hope you got the solution

  • Excise duty not appearing

    friends,
    we did GR, J1IEX also done,in miro there is no excise duty appearing,
    any inputs,
    regard,

    Hi
    Please check whether invoice verification is completed for this line item of the PO.
    Regards,
    Lakshmanan Krishnan

  • IN MIRO excise GR/IR account is not appearing

    Dear All,
    while booking Invoice GR/IR account is not appering though exise is captured and posted earlier.
    Please suggest,
    Regards,
    Vimlesh

    >
    Vimlesh_S1 wrote:
    > Dear All,
    >
    > while booking Invoice GR/IR account is not appering though exise is captured and posted earlier.
    >
    > Please suggest,
    >
    >
    > Regards,
    > Vimlesh
    If the GR is non-valuated, the GR/IR account is never hit, the entries become
    Vendor - Credit
    Stock/Consumption - Debit.
    Check whether GR took place for PO.

  • JEXC (Excise invoice) in application V1 not printing.

    Hi all,
    Under NACE, in application V1,and for the output type JEXC, i am not able to print the form. In print preview, it gets displayed, but when v print, the status will be printed but the printout is not coming.
    Can anyout pls help me sort out this issue???
    TIA,
    sinthu

    Hi,
      Check whether the output device is configured properly for the device type, this settings are available in SPAD transaction,
    Rgds,

  • Invoice/billing document Number  not appearing on sales order document flow

    Dear all,
    After saving the sales order invoice when i check in va02 sales order document flow invoice number is not generating

    Really something is wrong in your configuration.  When your delivery status shows Being Processed, I could see subsequent two documents, viz.Confirmation of Service and GD doc reference as complete.
    Can you let me know how many line items that delivery contains?  The reason for this query is normally, for stock item, we see Material Document reference and for non-stock item, we see Confirmation of service.  But in your case, I could see both.  From your VBFA table screen shot, I could see two different material document references.
    G. Lakshmipathi

Maybe you are looking for