Excise Duty Not to be Collected from Customer

Dear All,
I require help in a scenario, wherein company has already paid excise duty
to produce the goods but does not collect it from the customer for any
footwear pair which has been priced less than 250 Rs.
The company wants excise to appear in the sales invoice so that excise
invoice can be captured.
Require your suggestion in configuring this scenario.
Thanks and Regards
Adithya

You have not indicated what will happen if the price is above INR 250.00.
If the requirement is excise should not be collected only if the value is below INR 250.00, then, through standard it is not possible.  Through exit you can control this.  On the other hand, if you dont want to debit the customer for excise duty irrespective of invoice value, then set the excise condition type as statistical, so that excise invoice can also be generated.
G. Lakshmipathi

Similar Messages

  • Excise duty not capured..?

    Hi gurus
    Can anybody giv  some inputs..
    I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
    In this case how can i capture the excise duty after MIGO..?
    Please explain me some inputs..?
    Thanks
    sap-mm

    Hi,
    You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
    regards.
    prasad

  • Excise Duty Not appering in GR

    Dear all ,
    Excise Duty Not appering in GRn for PO  ,what may be the possible reasons ?
    Pl guide

    Hi,
    Pls check the J1ID
    1. Material maintained in J1ID for that plant
    2. Input and output material declared for the plant
    3. Vendor excise maintained
    4. Excise indictaor for the vendor maintained
    5. Plant excise details maintained in J1ID

  • Excise duty not determined in goods receipt with reference to PO.

    Dear All,
    I am implementing Condition based CIN.  I have created PO and maintained all excise duties in XK11 transactions. Excise duty has determined in PO. But When I am creating MIGO with reference to PO the excise duty is not copied from Purchase order.
    Please suggest.
    Thanks & Regards

    Dear All,
    If you have any idea, Please let me know.
    Thanks & Regards

  • Excise Duty not calculated at MIRO

    Hi
    We have upgraded the patch level of SAP_APPL  from 10 to 11. Now, in PO we have assigned a tax code for calculation of excise duty at 14.42%. In the tax details in PO Items, system is showing the calculation of excise duties correctly.When the excise invoice from vendor is posted through J1IEX . Here the system is passing the entries
    BDE Dr
    Cess Dr
    SECESS Dr
           Cenvat Clearing A/c Cr
    When we do MIRO, system is passing the following entries
    GR/IR Dr
         Vendor A/c Cr
    The correct entries to be passed shoudl be
    GR/IR Dr
    Cenvat Clearing Dr
             Vendor A/c Cr
    When we were on patch 10 for SAP_APPL, system was passing the entries correctly. However, after the upgradation, system is not capturing the excise details. We have maintained all the related configuration in J1ID and also maintained the condition records in FV11.
    Regards
    Sanil Bhandari

    Hi,
    Check whether "GR based IV" is active for the PO line item under "Invoice" Tab. If not then active and check or do a complete new cycle with this indicator as active and check.
    Also check that in MIRO, you are selecting the tax code of PO at Header level in "Basic Data" Tab also.

  • Excise duty not picking when we enter basic price in contract

    Hi Friends,
    When we are creating contract, we have to manually enter basic price after entering basic price system is not picking Excise duties. But we are doing carry out new pricing that system is picking excise duty. So i need solution from all SD experts.
    I need two options one is when we are creating contract after entering basic price system should automatically pick Excise duty. Or System should prompt that i have to carry out new price. Please suggest how to do.
    Thanks in advance
    Sree

    Use same Excise Con Type based pricing procedure, Wat you might be using for your normal sales order.
    Or you can refer standard pricing procedure foor excise based pricing
    JINFAC     IN:Factory sale (pefer)
    JFACT     IN:Factory sale with formula
    Primarily, maintain Condition Record for Excise Duty Con Type with relevant access seq & tax code in VK11.
    On execution, check plant & S Loc. determination should take place automatically.
    Thanks & Regards
    JP

  • Excise duty not reversed even after Excise Invoice is reversed

    Hi Experts,
    Please give me solution for  excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is reflected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
    The cancell invoice should not appear for duty payment statement in the J2IUN.
    Rgds
    Shailesh W

    Hello Sir,
    I will provide u further details for this Issue.
    This is to inform you that excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap & fresh Inv no 1000200214 dt. 06.09.10 is prepared .We have noticed that in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is refected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
    As per our understanding,the cancell invoice should not appear for duty payment statement in the J2IUN.
    You are requested to check the same at your end and let us know the reason for the same.
    We are post the excise document in month of april 10 vid doc. no.10000021 dt. 02.04.10 7 10000057 dt. 10/04/10 and same is reversed vide do. no 1000074 dt. 02/04/10 &  25000003 .
    While arriving the duty payble amount, we are found following discrepancy in J2IUN (Z-Report) & FBL3N (G.L) Account
    Duty payble fig. As per J2IUN    Rs. 9482.00 (Basic)
    Duty Payable Fig. As per FBL3N Rs. 7247.00 (Basic)
    Diff. Rs. 2235.00
    The diff. due to reversal of excise posting document not a/cted in J2IUN Report.
    Rgds
    Shailesh W

  • Excise Duty not updating in Billing & Excise Invoice

    Dear SAP Guru,
    Kindly help me to solve 2 issue as mention below :
    1. Excise duty is not flowing in my billing document when i am creating commercial invoice. Also in my excise, I am getting excise duty 0.
    2. When i am creating commercial invoice, the net amount is showing me in dollars but at the time of creating excise invoice it should show me in Rs? Which is not happening.
    Please guide me what are the setting i have to check to fix my problem
    Thanks in advance.
    Also kindly send me the CIN Configuration along with the snap shot to my email id : [email protected]
    Thanks & Regards,
    Rajan

    > Dear Lakshmipati,
    >
    > Plant has been specified in the SO but still excise
    > duty is not flowing to my document.
    >
    > Thanks
    >
    > Rajan
    Dear Rajan
    You can check in the following
    1) In J1ID, select "<i>Excise Tax Rate</i>" and ensure that for the chapter ID, you have maintained 16%
    2) In J1ID, select "<i>Excise Indicator for Plant</i>" and ensure that for the combination of Company Code and Plant, "1" is maintained on the extreme right side.
    3)  In material master, select "<i>Sales: sales org.1</i>" and ensure that "<b>1</b>" is maintained for "<i>Tax Category - JTX1</i>".
    Thanks
    G. Lakshmipathi

  • Excise Duty not capturing in invoice

    Dear all,
    All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
    Regards,
    Raziq

    Hi Raziq,
    When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
    In this system will show the Excise Duty and it will post the below accounting Entry:
    BED Dr
    eCess Dr
    HECess Dr
    CENVAT Clearing Account Cr
    Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
    Please let me know if you are following above approach or not.
    Br,Vivek

  • Excise duty not loaded onto inventory for non excisable plant

    Hello
    I am facing a problem in excise duty flow. I have two plants, one excisable and second non excisable. one vendor is supplying the material to both the plants, so vendor is sending the invoice having BED, ECess & SECess for both the plants.
    For excisable plant all the duty values are flowing correctly, but for non excisable plant BED is getting loaded onto inventory.
    For non excisable plant, I have maintained conditions records al plant level for JMIP (BED Inv %), JMX2 (A/P BED Inv), ZECN (IN:ECess Inv %), JEC2 (ECess Inv Total), JSEI (IN: A/P SECess Inv), JHX2 (IN: SECess Inv Total).
    During MIRO, BED is not getting loaded onto inventory, while ECess & SECess is getting loaded to material.
    Pl suggest, where to check the settings or any settings for condition types, tax procedure etc.
    Thanks & regards'
    Manoj Gupta

    Hi,
       The system behaviour of posting to stock account is controlled by account key NVV. Go to OBQ3, in your tax procedure TAXINN (or copy of that procedure) check for the condition types which account keys are assigned.
    System will never discriminate that BED is not getting inventorised but ECess and Hcess on BED get inventorised.
    Regards

  • Excise invoice - basic excise duty not appearing

    Hi,
    I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess. 
    I am using TAXINN.
    In accounting document, basic excise duty, education cess and secondary education cess are appearing.
    Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
    Regards,
    T Saravanan

    Dear  Saravanan,
    Already our friend MBS suggested in detail to that
    Please check the configuration settings in the IMG through this Path
    IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
    Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
    Is this first time you are trying to create excise invoice or recently you are getting this issue.
    If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
    If all settings are perfect then you can raise the OSS note to the SAP people.
    I hope this will help you,
    Regards,
    Murali.

  • Excise duty not getting calulated in MIRO

    Dear  MM Gurus,
    User has caputured an excise invoice and entered a GR with reference to the excise invoice and posted excise invoice
    then user has reversed GR and without reversing(ie cenvat posting),he has made the GR.
    Then he has posted cenvat (part-II)
    Now during Miro,excise duty amount is not getting calculated
    also excise invoice shows, duty credit is not availed but it is inventorised.
    How to take credit and post MIRO ?
    Thanks & Regards,
    S.S.Reddy

    for excise calclated in miro
    check entry in
    img-logistic general-tax on good movement-india-basic setting-determination of excise duty_-maintain excise default_
    check urs tax procedure & condition here

  • Excise Duty Not  geting calculated in Export excise Invoice

    Hi;
    As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of  bond Value.
    Kindly let me know  what kind of data is missing.
    Avinash

    Hi Avinash,
    Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
    help of ur's could help me lot ..My mail id [email protected]
    Thanks in advanec in for your help.
    regards,
    Vijay Khochare

  • Excise duty in Subconrtacting with components from another plant

    Dear SAP Gurus,
    I have a typical scenario in subcontracting. I have a company code 0001 which has 2 plants 1000 & 2000.
    Plant 2000 creates subcontracting PO against vendor XYZ for FG with Excise duty.
    However plant 1000 issues the component  which is excisable Material.
    Just to summarise the component issued from plant 1000 is excisable & FG to be received from Sub contractor in Plant 2000 is also excisable.
    Kindly guide.
    Regards

    Hi
    For plant 100
    1) Create a sub PO
    2) Issue the material th MB1B 541
    3) Create a excise invoice in J1IS reference document is step 2 doc.No need to create a Subcontracting challan as the excise Invoice would serve as a Legal document
    Account entries will be
    ED Suspense Dr
    ED Payable Cr
    ETT OTHR will be called
    4) Recieve the material in MIGO
    5) MIRO for processing charges only
    For plant 2000
    1) Create a sub PO with Excise duty
    2) Issue the material th MB1B 541 create a subcontracting challan in J1IF01 -No excise duty
    3) GR and J1IEX -For capturing and posting Excise duty
    Acc Entry
    ED Recievable Dr
    ED Clearing Cr
    4) MIRO for processing charged and Excise duties
    Regards
    Sandeep

  • Excise duty - not reflected in Purchase Order

    Hi Dears
    I have maintained tax code JMOP with tax code FV11 and selected country-plant-control code wise. I have also entered desired rate of excise duty here. Further J1ID was properly maintained for material-control code (Chapter id). But when I prepare purchase order, condition type JMOP is missing. After analysing it is found that control code value is not shown in anaysis pricing in value of document. Plz refer attachement.
    Plz let me know where settings is incomplete. I will heartly appreciate pinpointing solution.
    Thanks in anticipation
    Manish K Ojha
    Chartered Accountant
    Certified FICO Consultant
    8275058999

    check your Tax procedure has your cdn type JMOP .
    in FV 11 maintain cdn records for both set off and  %.
    follow the below link to understand better. Do the check and it will work.
    SAP CIN MM_check point_Logic_Q&A
    regards
    manu

Maybe you are looking for