Excise Duty sediment allowance calculation

How does SAP deal with sediment allowance:
For cask products we are able to claim a sediment allowance, for the undrinkable bits at the bottom of a cask. So if a product has a volume of 9 Gallons (40.9L) but there is a sediment figure of 0.7L we only pay duty on 40.2L.

The tax code in PO follows the FI pricing in OBQ3, TAXINN...
    it is been maintained as u have described..
     first create tax code in FTXP say F1= 8.24% excise and 4% vat
    then maintain conditions records for the above tax code if FV11
         for JMOP( BED)     = 8
               JEC1(ECESS) = 2
               JSEP(SECESS) = 1
               JMX1(BED % CREDIT) = 100
               JEX1(ECESS% CREDIT) =100
               JHX1(SECESS% CREDIT) = 100
               JVRD(VAT CREDIT)      = 4
then assign tax code to company code in tax on goods movement < basic setting < calculation based
the check the condition type please try OBYZ...

Similar Messages

Excise duty an VAT Calculation

Dear SAP Gurus,
I want to calculate the price for the PO with excise duty, education cess and sec edu cess for which VAT/CST is applicable.
Please clarify how this calculation work, as per my understanding ED is calculated on basic price say
basic price - discounts = X
X * ED (8%) = Y.
Y * edu cess (2%)
Y * sec edu cess (1%)
In condition records how do we define/alculate edu cess on ED and sec edu cess on ED.
This will amount to price with excise duty. On this we need to add VAT (4%) or CST (12%) + Freight cost. This will be the final cost of the PO.
Kindly clarify the above calculation if its correct and if you please give me the condition type for all and how to map the same in the config setting. And also VAT/CST we define in the calculation procedure in M/03 or we need to define the same in condition records(FV11) or in Tax code maintenence (FTXP).
Please help.
Regards,
Prashanth Pai

The tax code in PO follows the FI pricing in OBQ3, TAXINN...
    it is been maintained as u have described..
     first create tax code in FTXP say F1= 8.24% excise and 4% vat
    then maintain conditions records for the above tax code if FV11
         for JMOP( BED)     = 8
               JEC1(ECESS) = 2
               JSEP(SECESS) = 1
               JMX1(BED % CREDIT) = 100
               JEX1(ECESS% CREDIT) =100
               JHX1(SECESS% CREDIT) = 100
               JVRD(VAT CREDIT)      = 4
then assign tax code to company code in tax on goods movement < basic setting < calculation based
the check the condition type please try OBYZ...

Excise Duty Not geting calculated in Export excise Invoice

Hi;
As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of bond Value.
Kindly let me know what kind of data is missing.
Avinash

Hi Avinash,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare

Excise Duty is not calculating in Export Excise Invoice

Hi Experts,
Please help me out to resolve below scnerio:
When Client is creating a domestic Excise Invoice by Tcode J1IIN, then BED, Cess & HSCess is calculating properly. But in case of Export Excise Invoice by J1IIN only BED calculation is displaying, Cess & HSCess value is not coming. Kindly guide me how can i resolve this issue. Also explain me the exact process of Export Invoice with Excise configuration.
Regards
Mahendra Mhatre

Hi Mahendra,
I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement. But, in SAP the same should not be posted in any of the excise tables. I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice. Can you please speak to the SD consultant.
Hope this helps.
Vikas.

Excise duty getting calculated on freight value

Hi frnds,
I have an excisable material and the freight charge (FRA2) for this material.Tax procedure is TAXINN.
My issue is - during MIRO the excise duty is calculated on the material as well as on the freight charges. My client does not want excise duty to be calculated on freight charges.
Do I have to look the config for pricing schema or anything else.
Need your advice...
Regards,
Sachin Narvekar

Hi,
As per taxation , on Freight there will be always Service Tax, so create a Service Tax code and assign in MIRO with Planned Delivery Cost. If your vendor is same for material as well as Frt, if possible create a new vendor code for Frt as service vendor.
Rgds,
Vikas Mayekar

Excise duty is not calulating

Dear All,
if i am creating sales order excise duty is not calculating.there is message which is i'm getting.No add. Vendor / Customer data maint. for -Please maintain J_1IMOVEND.
Regards
Ajit Jaiswal

in customer & vendor where we maintain Excise tax indicator.
Go to J1ID, select "Customer Excise details" and execute. There check whether the customer code is maintained there. If so, drag your mouse to right side and check "1" is maintained under the tab "Declared".
thanks
G. Lakshmipathi

Excise Duty issue

Dear Sir,
I configure Excisable depot.
STO Process
we created purchase order in which price is mentioned 1000 for a material, and we did delivery ,proforma invoice and excise invoice ( Price of material 1000, Excise Duty is BED 100 Ecs 2 H Ecss 1) through J1IIN and we have done Goods receipt through MIGO while doing MIGO we have given Base Value 1000 ,BED 100, ECS 2, H Ecs 1 and J1IG document also created.
the issue is that while selling goods, our sales price will be 2000 so naturally BED will be 200, ECS 4 and Hecss 2 in our sales invoice. but when we create Depot Excise Invoice through J1IJ . excise duties BED 100, Ecs 2 and Hecss 1 are appearing which means the amount of excise duties are picking up from J1IG document OR MIGO Document.
question is that we need to do Price escalation in depot , how can we treat excise duties in Depot?
Do we need to do JV in Depot for excise?
Please give me an insight in this regard as early as possible
Thanks
Shibu Chandran

As per excise law in India, whenever there is a price escalation happens in a depot we have to create a document called "A Certificate" by paying additional excise duty on the differencial amount between STO price and Depot sales price. Because when you post incoming excise duty in J1IG after MIGO at depot, system captures BED, CESS & E.CESS as per the chapter ID of the material being transported from the factory and based on this Excise duty value for STO is calculated.
If the selling price of the material is higher than the STO price, we have to pay excise duty on the defference. Because law requires excise duty to be calculated on the selling price or assesible value if one exists.
perform the following activities
J1ILN >Indirect taxes>Procurement->Excise invoice->For Depot--> J1IGA Acertificate entry at Depot
Here enter the internal excise invice already captured at J1IG. System will show you the excise duty values to corresponding Folio nos. Here you can enter excess amount to be paid for each line item in the excise invoice. Save.
Now you create OR, delivery and PGI from Depot for customer. Go to J1IJ to create Depot Excise invoice. After entering the delivery document no. you will see a list internal of excise invoices choose the excise invoice to which your delivery material belongs. In the bottom you will see other table containing a list of "A Certifivates" created for all your internal excise invoices. You have to choose the "A Cerificate" of the internal invoice which you have selected already. Capture and post the document. Now RG23D will be updated.
Now you create the commercial invoice for the customer in VF01. In item condition tab you can see the effect of "A Certificate".
Please reward if you find this as useful
Regards
Ramesh

Excise Duty values getting inventoriesed in MIGO but reversed in MIRO

Dear Experts,
I am using Taxinn procedure and while creating the PO the excise duty values are calculated properly but when I am posting the MIGO the stock value is posted along with the Excise duties. The excise invoice is captured & posted in MIGO itself and the values are posted correctly.
While posting the MIRO the excess amount is posted at the time of MIGO is posted back to the material. How do i fix this??
thanks in advance
Suresh

Hi Jayakantan/Ashok
thanks for the replies
I am using Taxinn procedure and the conditions are flowing from that procedure. In the purchase order i am giving the condition types only for basic price and freight.
As far as i know, the account key determines whether the condition type is cenvatable or to be inventorised. If i give the account key as NVV the values get inventorised. If i give the other account keys and assign the gl accounts to that account key that value will be posted to that gl account and not inventorised. Correct me if i am wrong or is there any other settings which will define so.
I have done the following settings as well for the condition types
spro>log gnrl>tax on goods mvmt>india>basic settings>maintain cond typs>classify cond types
and one more similar setting in the same path.
do i need to do anything further?
Suresh

Excise Duty on Assessable Value in PO

Dear Friends,
The scenario is that weu2019re purchasing material from an outside vendor & therefore creating a PO for that. Now in this scenario the Purchasing Value is different (say e.g Rs 10,000), but excise duties have to be calculated on the Assessable Value (say e.g Rs 8,000). In the std. process, to calculate excise duty we create Tax Code & enter that Tax Code in PO-> Invoice tab in the line item. The system then calculates the Excise duty on the basis of Net Price (field: NETPR) mentioned in the header i.e. the Purchasing Value (Rs. 10,000). While capturing in J1IEX, we mention the assessable value & there the system calculates the excise duty on assessable Value. But our issue is that we want that in PO itself Excise duty shd be calculated on the Assessable Value (i.e. Rs. 8,000) & not on Purchasing Value, so that we can give correct PO to the vendor. At the same time the Purchasing Value (Rs. 10,000) shd also remain in the PO, becoz GR/IR needs to be valued on Purchasing Value ONLY. Weu2019re using CIN. Pls advice.
Thanks
Edited by: Siddhant Hant on Jun 17, 2010 9:53 AM

Hi,
Which pricing procedure you are using ?
If you are using TAXINN then you can adjust in FV11 say in your case calculation as under.
Assessable      10     2     1
10000      1000     20     10
      12.5     2     1
8000      1000     20     10
Here to arrive the exact value of excise cahne the excise duties as showun like total value of excise is 1000 in order to arrive that 10000 on 8000 change excise duties to 12.5% then it will be equal to 1000. Hope this clears you.
Regards

Need to Charge only Excise Duty Cost to customer.

Hi Gurus,
I need to sell lot of materials.Out of all these material , i have 1 material whose only excise duty price, i need to charge to customer not the actual price
On the basis of its price the excise duty will get calculated.
How should i proceed?Pricing procedure is same for all customers.Pl. Help me regarding the same.

Create one more condition type with calculation type as percent with negative sign in V/06. Have the access sequence as Customer / Material (or whatever combination you require) and maintain 100% in VK11. Maintain this condition type before your excise condition type and assign the From-To step number accordingly.
So whenever you create sale order, system will search for this combination and wherever, you maintain 100% discount, this will reflect in your sale order and accordingly, only the duty portion will get debited. Wherever you have not maintained the 100% discount, then the selling price and duty as well will get debited as there will be nil value against this condition type in sale order.
G. Lakshmipathi

SED (Special Excise Duty) column not available in J1IJ (Depot Excise INV).

Hi
I am creating Depot sale scenario. while creting Depot Excis invoice through J1IJ t-code there are column like BED,AED,ECss,SHEcss but there is no column for SED (Special Excise Duty). In my scenario I need to capture the SED .
I am able to capture the SED in RG23D register for Receipt part but for Issue part I am not getting this SED.
Please help.
Regards
Sivakumar

Hi,
Check again, There is a column for SED next to BED in J1IJ screen also.
Regards,
Brinda

Excise Duty Calculation

Hi Folks this is my 1st q in this forum.
I want to extract the excise duty,cess and hes in mu AR invoice where the unit price is inclusive of these components.
Eg:
I purchase 10 nos for100 so the bill amt is
100163.2+1.6=120.8
In my Ar invoice I bill this for
120 + vat 4% (For 10 nos)
The excise duty ,cess,hes should be same as above
or proportional if I sell less qty
can anybody explain please.

Hi,
At present BED is 14%, cess 2% and HES 1% am i right.
In OSTT, Nota fiscal ID of BED, cess and HES may be (or will be) -90.
Using this you can calculate Excise Duty amount seperately from overall tax amount.
Nota fiscal id of VAT is may be (will be) 7. Using this you can calcualte VAT amount from Total tax amount.
In OSTT, Numerator column have some value (for ex, 5 for BED, 6 for Cess, 7 for HES) using these numbers you can calculate BED, Cess and HES values seperately and you can print it in report.
How to calculate?
1.In PLD, in Repetitive area, create an text field and enter value of Numerator (if you calculate tax amount seperately) or Nota fiscal ID if you calculate Excise duty(combination of BED, Cess and HES)
2. Create Database field and select OSTT - Sales tax authorities Type and select Nota fiscal id or Numerator.
3. Create formula field and check the two fields.(ie., Field_xx = Field_xy) (Here, Field_xx is text field and Field_xy is Database field)
4. Create Database field and select A/R Invoice - Tax documents per row (for A/R Invoice) or Purchase Order - tax documents per row (for purchase order)
5. Create formula field and multiply step 3 and step 4.
6. In Repetitive area footer, create one formula field seperately for each and every calculation.
Now you can print those values whereever you want in PLD.
I hope this could help you to solve the problem.
Regards
Raja.S

Excise duty & Educational Cess required display mode no manual entry allow

We have automation program for creation of excise invoices for different customers. If I excute the program for the same system is allowing me to change / manual entry of excise duty, assessable value & ED Cess. Which is not required for our business rate and will be fixed, and I want to know where we can do the change for display mode.
Excise invoice no manual entry possible.
Regards,
Vijay Sanguri

Hi,
Go to V/06
Select your excise or cess condition type, go to details
REMOVE TICK MARK OF AMOUNT / PERCENTAGE & VALUE
Then it will appear in display mode in order & also in invoice
Kapil

Excise Duty not calculated at MIRO

Hi
We have upgraded the patch level of SAP_APPL from 10 to 11. Now, in PO we have assigned a tax code for calculation of excise duty at 14.42%. In the tax details in PO Items, system is showing the calculation of excise duties correctly.When the excise invoice from vendor is posted through J1IEX . Here the system is passing the entries
BDE Dr
Cess Dr
SECESS Dr
       Cenvat Clearing A/c Cr
When we do MIRO, system is passing the following entries
GR/IR Dr
     Vendor A/c Cr
The correct entries to be passed shoudl be
GR/IR Dr
Cenvat Clearing Dr
         Vendor A/c Cr
When we were on patch 10 for SAP_APPL, system was passing the entries correctly. However, after the upgradation, system is not capturing the excise details. We have maintained all the related configuration in J1ID and also maintained the condition records in FV11.
Regards
Sanil Bhandari

Hi,
Check whether "GR based IV" is active for the PO line item under "Invoice" Tab. If not then active and check or do a complete new cycle with this indicator as active and check.
Also check that in MIRO, you are selecting the tax code of PO at Header level in "Basic Data" Tab also.

Excise duty Calculation In Purchase Order

Dear all
I am facing the problem in exduty calculation in PO
Actually for my clients business process scenario, Excise duty is getting inventorised so for that i have done the config in TAXINN by using Non deductible keys for JMOP and SEC edu cess.
Well now few days back the taxes were calculating in PO (Excise duty +VAT) perfectly also the dutie swere getting inventorised.
NOTE: In my scenario while the goods are received Excise duty is applicable which has to be inventorised whereas while the finished goods are sold no excise duty is applicable..that is my client is not avaling the credit.
But now when i m testing again ...i.e i have made the PO and for VENDOR,MATERIAL and PLANT Combination i have mentioned the condition records
JMOP,JSEP and JEC1 ,JVRDaslo i have mentioned JMX1 ,JHX1 and JEC1 as 0% coz i want the excise duty to get inventorised , for a particular tax code (01)
I have selected the tax code in PO but it is not calculating Excise duty though it is calculating VAT perfectly.
what can b the reason..Plz help me in this context
Regds
shailesh

i have checked the validity but still it is not working.....also i have created one more material and maintained all the condition but still it is not working
plz help me regdg this
regds
shailesh

Excise Duty sediment allowance calculation

Similar Messages

Maybe you are looking for