Excise rates not captured during GR

Dear All,
I am facing a problem while doing GR for DEPOT.
Goods have been transferred from manufacturing plant to DEPOT.
During MIGO I am able to get the base exiceable value, basic exice duty value, ECess value and HSECess value.
But I am unable to fetch the rates for BED, ECS and HCS.
Even I have manually maintained the 8%, 2% & 1% respectively for BED, ECS and HCS. But it is not saved during GR.
Can any one help me to fetch the duty rate during MIGO for DEPOT stock trnasfer?
Thanks & Regards
Piyush

Dear Ajit,
It has been already maintained in the STO. As I had already mentioned that values[Amount] is flowing but rates are flowing for the BED, ECS and HCS.
My requirement is to get the excise duty rates in the MIGO transation during GR.
Thanks & Regards
Piyush

Similar Messages

Excise invoice not capturing during migo?

when I tried to capture the excise invoice during Migo. I am unable to select the capture only option. it is automatically selecting "refer only excise invoice"? how to solve this problem.

Dear,
I think you have not maintain Excise data
T.code
J1ID - Excise rate maintenance
Maintain Chapter Id,
Maintain Mateial & Chapter id combination.
CENVET Determination (If material is CENVETABLE)
Vendor Excise Detail
Excise Tax Rate.
Hope above will useful.
GOPAN.

Excise Duty not capturing in invoice

Dear all,
All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
Regards,
Raziq

Hi Raziq,
When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
In this system will show the Excise Duty and it will post the below accounting Entry:
BED Dr
eCess Dr
HECess Dr
CENVAT Clearing Account Cr
Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
Please let me know if you are following above approach or not.
Br,Vivek

Excise is not captured in MIRO in Dealer Invoice

In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
Excise is not captured in MIRO.
Regards.,
Lakshmanan.S

In case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts.

Excise is not captured for all or Second line item.

Dear Experts,
Excise is not updating for all the line items in while making Goods Receipt.
while making goods receipt excise is not capturing for all the line items.
but excise is captured at header level,its presumed that all the line items
are capturing excise,please suggest me,what might be the reason.
Thanks in advance.
Varun

Hello,
As i think, you are creating Goods receipt With Excise option "Only Part1" in MIGO, then system will update only J_1ipart1 table with qty and without internal document number, after J1IEX only system will Update J_1IEXCDTL table with all value and qty and internal document number.
Suppose you have done the GR -Option' 'No excise entry" then system will not generate any Excise realted tables. Then you should Capture Part1 entry with help of J1I5 t code, then system will update qty field , here also system will not update internal doc number.
Write a Updation program for J_1IPART1 table for qty field
Mahesh Naik

Excise rate not maintained

Hello,
In J1ID there Two tabs,, Amend Purchase order and Amend sales order.
What is the use of these two tabs.
When i click on this Amend Purchase order then error"Excise rate not maintained"
Regards
Mahesh Naik

Hi Mahesh,
The result will be shown if u have changed excise rate otherwise it will not give the results to amend purchase orders
First change the rates before the amend purchase order
Regards,
Satpal

Values not capture during adobe form display on pa30.

Hi Experts,
I have attached Adobe Form into Transaction PA30 in which form values are not capturing during form display,
But its displaying at the time of form generation on ZHINUREQ_CORRS_LETTER program.
Kindly give suggestion.
Regards,
Abdul

Hi Saujanya,
This could by caused by the network, the used browser or additional browser plugins. Try to do the following:
1. Test with an alternative browser (if you are on a SP which supports different browsers than IE, see PAM, http://service.sap.com/pam): If it works with Firefox, then you know the problem is caused by IE and not by the OS, network, ...
2. Deactivate/uninstall all additional browser plugins/add-ons (like google toolbar, Yahoo toolbar, ...)
3. Create a client trace as explained in SAP note 999998. Maybe there's a hint in the trace. Watch for something like "ERROR".
4. Install a HTTP sniffer (like "fiddler") on both machines and compare the network traffic. Maybe there's a request with a 4xx HTTP status code?
5. How is the machine connected to your network? Is it behind an additional webproxy?
Hope one of this helps,
Ralf

Excise conditions not capturing after batch split

Dear All,
After creating PO,OBD, Invoice found that for a material 10 qtys got batch splited as 5 CV as each line item. For one line item excise conditions were picked where as for second line item (different batch) excise conditions JEXT, ZECS & JA1X were not captures.
What might be the reason. Conditions are maintained in VK11.

Dear Lakshmipathi,
PFA the below screen shots. Also fyi, from analysis tab it is showing as flowing.
Thanks & Regards,
Ganeshbabu.KA

Excise rates not reflecting in PO based on values entered in newly created condition table in TAXINN.

Dear SAP Gurus,
I have created a new condition table using t.code m/03 by taking a copy of existing standard condition table. I have assigned the newly created condition table to access sequence. After assignment of condition table i have entered the relevant excise rates in excise condition types using the newly created key combination through t.code FV12. When i enter the Tax Code in PO, excise duty rates are not reflecting in PO. When i am entering the excise rates in any other standard key combination, excise rates are reflecting in PO.
Following are the fields in newly created key combination (Condition Table)
1) Country
2) Plant
3) Control Code
4) Tax Code
Kindly help me in resolving the issue.
Regards,
Vinay

HI,
Check whether you have maintained the rates for the new tax code in FV11 also whether you have assigned the tax code to the company code ?
Compare the tax code which is working in PO with the one which is not & find out if there is any difference.
If you want to post the tax values to the new G/L in OB40 then maintain the same settings for the tax code which is working in PO.
Thanks & Regards,

Updated exchange rate not captured in sales order

Hi,
We have updated exhange rate type from 'M' to 'S' . However even after refreshing the sales order new exchange rate type not captured in the sales order

Hi,
Can you please elaborate on what you mean by "picked up wrong exchange rate". Normally in the "Sales" tab in SO header you have a place where you can enter / see the exchange rate.
Regards
Sreekanth.

Excise Duty not coming during sales order creation

Hi Experts ,
Sub:Excise is not calculaing on sales oder for a perticular plant
We have configure a new manufacturing plant .in this the system not performing calcualtion on the base amount and no tax duty is coming .but for one plant its coming properly .
Vk11
J1id is maitain properly
Regards
Sachin g

Sorry, no idea what product you are using. Likely a classic SAP product of some sort. If it's Crystal Reports then you are using someones created report so check with that person or try the B1 forum possibly.

Excise amount not capturing in J1iex

hi,
i have done MIRO for customs & CVD payable. And in J1iex i have selected capture exise invoice and entered the PO number and commercial invoice number, then system is showing the line item with qty, but it is not given the excise breakup detail. It is giving blank. what will be the problem?an any one guide me on this.
govind.

While capturing J1IEX Vendor excise No should be given.

Excise Amount not capturing in MIRO

Hi
Excise amount is not being captured in MIRO. Case is that a GR has been reversed with 102 and then new GR was made but when user is trying to do Invoice Verification then he is not getting the MODVAT values there.
Please suggest what shall we do.
Thanks in advance
Pankaj

Hi,
Assign the excise and CENVAT accounts to GL Accounts.
Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts
per Excise Transaction
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Check and ensure the above IMG activities.
Regards,
G Bhaskaran

Excise Invoice not captured in MIGO

Hi..
I am using TAXINN procedure in which I am using JMOP condition type for BED. In ME21N I am able to see the condition type and values for BED. and I maintained that I can capture the excise invoice at MIGO level.
But while creating MIGO The values are not picked up from the condition type. I have checked all the tax code (2 Tax code) combinations but in vain.
please tell me where is the problem...How the excise data flows from ME21N to MIGO.
Regards
Rahul

Hai,
Maintain the settings in
1.SPRO - IMG - Logistics general - India - Basic settings - Maintain excise defaluts - Maintain the Condition type in the columns for the Tax procdeure TAXINN.
2.SPRO - IMG - Logistics general - India - Basic settings - Condition based excise determination - Classsify condition types.
3.SPRO - IMG - Logistics general - India - Basic settings - Business transactions - Incoming excise invoices. here maintain 101 mvt type with registers.

Tax Code Creation when Excise is not Known during PO creation

Hi,
Scenario: Dealer's Scenario where during PO creation we don't know excise Amount and we consider PO price to include excise. Apart from excise we have CST. Excise and CST both will be inventorised.
Example: PO = 5000 (Inclusive of excise) on which CST is 1 % = 50
Now during MIGO I apply MRP tick which Splits PO base value and excise. Say 1000 is excise out of 5000.
GRN should be of 5050 ideally but the ISSUE is system posts it for 5060 Rs i.e on 1000 again system calculates CST 1% and adds it during GRN.
Can anyone suggest what could be the reason for same and how to resolve it ? Is there anything with tax code creation, tax procedure or MM pricing procedure ???
Br, Deepti

Hi Deepti,
Creation of Purchase order inclusive of Excise Duty. @ 5000/- .
2. The Duties should be Inventories. But you cannot show actual Duties at time of PO.
In FV11, maintain 0% for Inventory Duty conditions. Maintain 100% for Inventory Total conditions and also maintain CST condition.
Display Taxes
3. In MIGO Base will default as PO Price, We will change it to Actual as per vendors Invoice also Enter BED,Ecs,Seces as per Invoice. Do NOT tick MRP indicator.
4.Accounting Entry for GRN
Regards,
Sachin Indulkar

Excise rates not captured during GR

Similar Messages

Maybe you are looking for