Excise Values Not Flowing in J1IIN-(export Excise Invoice)

Hai ALL,
I have gone through the previous threads,
with those replies, my purpose hasnt solved.
req: -
" I am creating Export Excise invoice - J1IIN ( wrt : Export Invoice-VF01), Maintained "Subtransaction type- EX Exports"-
did the rel config: specify G/L accounts for ETT.
- Excise values flowing from VF01- J1IIN for domestic sales, but the same is not flowing into Export Excise Invoice-" -
my doubt is: Do the Excise Values flow to Export Excise Invoice from Comm.Invoice. ( As in Exp.Exc.Invoice, system will not generate any accounting entries).

IN export sales,
I have maintained ED cond types as "Statistical" so that the values should not considered in Net value calculation. - which is working fine & Accounting documents for ED wont generate.
I have created Exp.Exc Invoice-J1IIN (with ref to- Comm.Invoice & Sub transaction type - EX_exports)- ED values in Comm Inv- flowing to Exp Exc Invoice. - In utilization tab- when change "Exc.Invoice type" - LoU, values become Zero- ( as MBS said, will take help of ABAPer to write the code "Suppress_calculation - "X"- )
But, can you confirm, that when we save Exp Exc Invoice- will accounting doc's generated or not-
( I expect, A/c'g docs will not generate- am i rite?)
after this, I have updated RG1-J1i5 (with Classification - IWE, RMA is done when GR from Production), Extract/print-RG1 - J2I5/J2I6.
Now create ARE-1 - J1IA101 ( wrt : Exp Exc Invoice) - mark the "Print ARE document"- Entered the "Bond" details in "BOND UT-1" tab. & save.
next, Post ARE-1 , Update ARE-1 & finally Close ARE-1.
"When we close ARE-1"?
is my understading above is rite??
pls suggest
Edited by: SAP Consultant- on Jan 28, 2009 4:31 PM

Similar Messages

Excise value not flowing in MIGO

Dear All,
While doing MIGO, the Excise value for BED, ECESS is not flowing but the values are flowing in Purchse order. But the SECESS alone is flowing in both PO and MIGO.
Points will be rewarded.
Thanks in Advance
Regards
Dhinakar

Hi raja,
h r u???
I have maintained all the settings, i thuink some note has to be applied. I will check it...
Thanks for ur Support
regards
Dhinakar

Excise values not flowing in J1IS

Hi.,
I have done return delivery of a material document with 122 movement type....In this 122 material document ..No Excise Entry is selected.
While doing J1IS with reference to 122 material document,excise values are not flowing .
If i do create & post excise invoice while doing return delivery ,then excise values are coming.
All the necessary settings & master data is correct.
Only problem is that in J1IS,base amount & excise values are not coming.
Please provide the solution.
Regards

But the excise values are automatically calculated w.r.t.the return delivery document.
What should be done to trigger the excise values automatically in J1IS.
Edited by: satpal mujawar on Jul 1, 2009 11:38 AM

Excise Duty Not geting calculated in Export excise Invoice

Hi;
As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of bond Value.
Kindly let me know what kind of data is missing.
Avinash

Hi Avinash,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare

Excise duties not flowing while creating return excise invoice

Hi friends ,
During sales return excise invoice creation ,excise duties are not determined automatically in J1IH. Is there any settings instead of entering the value manually in J1IH? I have searched the forum but only manual entries related results are posted.Is there any automatic determination?
Thanks in advance
Bhuvanashree

Dear Friend,
As per the SAP new package ETT RLFC has been introduced for Excise sales return. New tab "Return sales Excise" available in J1IH for post Return excise invoice automatically. .
We added ETT RLFC in table J_1ITRAN and did configuration for account determination for excise, this is helped us to post excise invoice for Sales return.
Please refer SAP Note: 1907900 - Error 8I-402 for return sales transaction(RLFC)- J1IH
In addition even after all the configuration of RLFC you are not able to post the Excise for return sales then this is due to confirmation of service in original delivery.
This is a typical case when you are using Batch managed material.
If this scenario arise implement SAP OSS note No: 1971904 which will resolve the issue.
Regards,
Ashish Kothari

Excise consdition value not flowing inot the invoice

Dear Gurus,
Excise condition value not flowing in to the invoice from sales order
Thanks
Sasi

Dear lakshmipathi,
Iam entering the BED/Ed/ShEd values manually....
Where can I check the Tax code in the sales order?Does you mean to say the Tax classification at Item-Shipping tab?
Thanks
Sasi

Excise is not flowing in the existing GR after system upgradation

Hi Gurus,
We have recently upgraded our system from 4.7 to ECC6 with patch level
9. Here Tax codes are not working for the POs already existing in the
sytem before Upgrade.At the time of Partial GR the excise is not
flowing in MIGO. The taxes tab is also not flowing the tax details in
the PO in invoice tab. We are unable to make those partial GR. But POs
being made after upgradation are having no problems with any of the
existing Tax Codes. All the Tax Codes are found working all right for
them.
Kindy help us how can we solve the issue immediately as it is very
urgent to us.
Thanks & Regards,
Sumanta

Edited by: Jeyakanthan A on Sep 13, 2011 3:57 PM

ED values not flowing in Excise Invoice

All excise settings are done.
Commercial invoice (billing doc type F2) is coming correctly with proper Excise duty and cess values.But In excise invoice created in reference to the commercial invoice these values (BED, Cess) are not flowing but material, description and quantity are coming correctly.
Please state what is missing.
Anubrota

Excise details are now flowing correctly in the excise invoice(in j1iin transaction).
Now Iam facing a problem in excise utilisation.Error message that is coming is " Not enough balance for utilisation"
As far as config is concerned these settings are done:
Utilisation determination: PLA BED account 50%
RG23A BED account 50%
minimum account balances :pla bed account 9,999,999,999.00
rg23a bed account 9,999,999,999.00
how to rectify the error?
anubrota

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Excise Duty Value not flow from J1IJ to VF01

Hi SAP Expert,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
But once i set, it will impact other billing document too. Please advise.
Thanks.

Hi,
I have successfully posted Excise Invoice at Depot using J1iJ.
When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
I analyse the pricing condition for condition type JEXP, below is what i got :
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1.The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

PS - PO Excise Value not deducted from Project Available Budget

Hello SAP Gurus,
My problem is that when an Excisable PO is created against SAP Project then the Excise Value is not included in Budget - Commitment/Actual Amounts.
PO Basic Value + Tax (VAT/CST) is deducted from Available Budget, but Excise value is not deducted even after Invoice Booking.
Please let me know where do I need to change so that the complete PO value is deducted from Available Budget.

Hi Bindal,
Origin of Project costs lies in other modules.
Pls get you Tax procedure checked by FI/MM. In Tax procedure there will be various Conditions used by your organization. Each Condition type will have an Account Key.
If that account key has 'Non Decutible' checked then the related tax amount will form cost on your project and vice versa.
if your organization is producing something using thses input materials then it would want to benifit itself by taking credit for Modavat/Cenvat against the Excise and other recoverable taxes it paid during the purchase of input materials.
Hence as a correct business practise such taxes will be correctly set as 'Dedutible' in Tax settings so that instead of getting inventorized the'y be offsetted and amount would be posted to some clearing amount.
In short MM would (correctly) not recognize these taxes amounts as cost and thus these values will not flow to PS also as Commitment cost or actual/statistical cost.
with regards,
Ravi Shrivastav

Basic Excise duty not flowing in Purchase order

Hi,
We are using TAX INJ and in version 4.7E. BED Percentage is not flowing in Purchase order, whereas E.cess andSEcess is flowing in PO.
We have checked all the settings and also the replies in SDN forum on this issue. COuld anybody add further inputs where to check for this issue.
Please revert
Regards
Uma

Hi,
First check the Tax Code in FTXP whether 100% is maintained for condition type JMO1 or not? If not then maintain
Also check following in J1ID;
- Chapter ID
- Material & Chapter ID Combination
- CENVAT Determination
- Plant Excise Details
- Vendor Excise Details
- Excise Tax Rates
If it is OK then check in SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults > Assign condition type JMO1 under column A/P BED cond.
If all above are OK then go to OBQ1 and for condition type JMO1, check the access sequence, it should be MWST. And then in FTXP, maintain 100% for condition type JMO1.
And then check in PO.

Excise duty not flowing in PO..?

Hi all
I have created new material master and vendor master ,excise master .
While screating PO excise duties are not flowing ..?
Thanks
sap-mm

Hi,
Maintian the Conditions if tax procedur is Tax INN in T.Code FV11 against the required condition type.
if tax procedure is TAXINJ maintain the Conditions in Taxcode FTXp.
Then maintian the Excise deatils in SPRo>.Logistics general>>Tax on goods movements >>basic settings.
Maintain the master data in J1ID.
Regards,
Andra.

Excise values should flow from PO-GR in J1IS.

Hi,
I have created a returns PO.
I have selected Only Part 1 at the time of posting GR.
Creating invoice thru JIS. System is picking the accessable value from J1ID.
But, I want the system to pick the excise values from PO-GR.
How this can be done.
Note: I dont want to use 122 mvt type method.

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Excise Values not appearing in MIGO

Dear All,
We are using tax procedure TAXINN.
When I tried to create a GR doc with ref to a PO the excise values are not getting flown from my PO.
I tried both in MIGO as J1IEX, but the excise values are not getting flown.
Also please note that for the same PO we have done a GR during the month of Oct & at that time there was no problem & all the excise values was displayed in the GR doc.
Analysis done till now.
I have checked the Excise Default settings & I can see the JM0P codtn type maintained under the A/P BED condtn as well as the JE0P Ecess Condtn type maintained under the Ecess AP.
Also the values are there in the PO which was determined using the condtn records.
I have also checked the Excise group,plant, company code & Excise G/L determination settings in IMG & everything seems OK.
But still I am facing the Problem.
Is there anything which I have missed in the above analysis ?
Please suggest your val inputs to solve this issue.
Regards,

Hi SNB,
Thanks a lot for the reply.
As you suggested I havent maintained the condition records for the set off conditions such as JMX1, JEX1 etc..
When I maintained it the values got displayed.
Now I have One more query.
See earlier I have created PO's with out maintaining records for these set off conditions & at that time the values were displayed in MIGO.
So how the system worked at that time?
Also note that I havent maintained any of the set off conditions in the Excise defaults (Since these are just statistical condtn types) . Is it OK?
Also maintaining the set off condition with 100% is a must in TAXINN & Is it Possible to display the values in MIGO without maintaining the records for these condtn types?
Expecting your reply.
Regards,

Excise Values Not Flowing in J1IIN-(export Excise Invoice)

Similar Messages

Maybe you are looking for