Excise values not flowing in J1IS

Hi.,
I have done return delivery of a material document with 122 movement type....In this 122 material document ..No Excise Entry is selected.
While doing J1IS with reference to 122 material document,excise values are not flowing .
If i do create & post excise invoice while doing return delivery ,then excise values are coming.
All the necessary settings & master data is correct.
Only problem is that in J1IS,base amount & excise values are not coming.
Please provide the solution.
Regards

But the excise values are automatically calculated w.r.t.the return delivery document.
What should be done to trigger the excise values automatically in J1IS.
Edited by: satpal mujawar on Jul 1, 2009 11:38 AM

Similar Messages

  • Excise Values Not Flowing in J1IIN-(export Excise Invoice)

    Hai ALL,
         I have gone through the previous threads,
    with those replies, my purpose hasnt solved.
    req: -
    " I am creating Export Excise invoice - J1IIN ( wrt : Export Invoice-VF01), Maintained "Subtransaction type- EX Exports"-
    did the rel config: specify G/L accounts for ETT.
    - Excise values flowing from VF01- J1IIN for domestic sales, but the same is not flowing into Export Excise Invoice-" -
    my doubt is: Do the Excise Values flow to Export Excise Invoice from Comm.Invoice. ( As in Exp.Exc.Invoice, system will not generate any accounting entries).

    IN export sales,
               I have maintained ED cond types as "Statistical" so that the values should not considered in Net value calculation. - which is working fine & Accounting documents for ED wont generate.
    I have created Exp.Exc Invoice-J1IIN (with ref to- Comm.Invoice & Sub transaction type - EX_exports)- ED values in Comm Inv- flowing to Exp Exc Invoice. - In utilization tab- when change "Exc.Invoice type" - LoU, values become Zero- ( as MBS said, will take help of ABAPer to write the code "Suppress_calculation - "X"- )
    But, can you confirm, that when we save Exp Exc Invoice- will accounting doc's generated or not-
    ( I expect, A/c'g docs will not generate- am i rite?)
    after this, I have updated RG1-J1i5 (with Classification - IWE, RMA is done when GR from Production), Extract/print-RG1 - J2I5/J2I6.
    Now create ARE-1 - J1IA101 ( wrt : Exp Exc Invoice) - mark the "Print ARE document"- Entered the "Bond" details in "BOND UT-1" tab.  & save.
    next, Post ARE-1 , Update ARE-1 & finally Close ARE-1.
    "When we close ARE-1"?
    is my understading above is rite??
    pls suggest
    Edited by: SAP Consultant- on Jan 28, 2009 4:31 PM

  • Excise value not flowing in MIGO

    Dear All,
    While doing MIGO, the Excise value for BED, ECESS is not flowing but the values are flowing in Purchse order. But the SECESS alone is flowing in both PO and MIGO.
    Points will be rewarded.
    Thanks in Advance
    Regards
    Dhinakar

    Hi raja,
    h r u???
    I have maintained all the settings, i thuink some note has to be applied. I will check it...
    Thanks for ur Support
    regards
    Dhinakar

  • Excise consdition value not flowing inot the invoice

    Dear Gurus,
    Excise condition value not flowing in to  the invoice from sales order
    Thanks
    Sasi

    Dear lakshmipathi,
    Iam entering the BED/Ed/ShEd  values manually....
    Where can I check the Tax code in the sales order?Does you mean to say the Tax classification at Item-Shipping tab?
    Thanks
    Sasi

  • Excise is not flowing in the existing GR after system upgradation

    Hi Gurus,
    We have recently upgraded our system from 4.7 to ECC6 with patch level
    9. Here Tax codes are not working for the POs already existing in the
    sytem before Upgrade.At the time of Partial GR the excise is not
    flowing in MIGO. The taxes tab is also not flowing the tax details in
    the PO in invoice tab. We are unable to make those partial GR. But POs
    being made after upgradation are having no problems with any of the
    existing Tax Codes. All the Tax Codes are found working all right for
    them.
    Kindy help us how can we solve the issue immediately as it is very
    urgent to us.
    Thanks & Regards,
    Sumanta

    Edited by: Jeyakanthan A on Sep 13, 2011 3:57 PM

  • Excise not flowing from J1IS to MIGO

    Hi All
             While Stoch Transfer,  in J1IS we give excise  and  document created while doing migo only base value is flowing BED ECS SECess not flowing ,what to do to get excise to flow directly without manual entering in migo.kindly help me in this regard
    regards
    kumar

    Hi,
    Pl. refer following thread for STO Process, hope it will help you.
    [STO Process?]
    [STO process]
    Regards,
    Vikas

  • Excise duty values not flowing from PO to MIGO

    All SAP Gurus,
    We have created a PO and used excisable tax code in it.
    Excise duties are calculated correctly in PO.
    When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
    System allows us to enter the Excise duty values manually.
    Further excise entries and register updates are happening correcetly.
    We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
    Please help.
    Regards,

    hi
    chekc following
    path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
    here give appripriate conditions for ur procedure as per BED   cess and other
    regards
    kunal

  • Excise Duty Value not flow from J1IJ to VF01

    Hi SAP Expert,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
    Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
    But once i set, it will impact other billing document too. Please advise.
    Thanks.

    Hi,
    I have successfully posted Excise Invoice at Depot using J1iJ.
    When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
    I analyse the pricing condition for condition type JEXP, below is what i got :
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    1.The condition was deleted manually in the item condition screen.
    2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

  • ED values not flowing in Excise Invoice

    All excise settings are done.
    Commercial invoice (billing doc type F2) is coming correctly with proper Excise duty and cess values.But In excise invoice created in reference to the commercial invoice these values (BED, Cess) are not flowing but material, description and quantity are coming correctly.
    Please state what is missing.
    Anubrota

    Excise details are now flowing correctly in the excise invoice(in j1iin transaction).
    Now Iam facing a problem in excise utilisation.Error message that is coming is " Not enough balance for utilisation"
    As far as config is concerned these settings are done:
    Utilisation determination:  PLA BED account 50%
                                          RG23A BED account 50%
    minimum account balances :pla bed account  9,999,999,999.00
                                              rg23a bed account 9,999,999,999.00
    how to rectify the error?
    anubrota

  • Excise values should flow from PO-GR in J1IS.

    Hi,
    I have created a returns PO.
    I have selected Only Part 1 at the time of posting GR.
    Creating invoice thru JIS. System is picking the accessable value from J1ID.
    But, I want the system to pick the excise values from PO-GR.
    How this can be done.
    Note: I dont want to use 122 mvt type method.

    hi
    chekc following
    path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
    here give appripriate conditions for ur procedure as per BED   cess and other
    regards
    kunal

  • Base value not flowing in J1IEX

    Hi All,
    The Excise Base Value is not flowing in J1IEX. I am doing an STO. The other duties like BED, AED are flowing while capturing  excise invoice, but not the Base value.
    PLease let me know the settings to ensure the Base value flows in J1IEX.
    Thanks.
    Manish

    Hi Chintu,
    Please find the process for STO.
    > > -2 Plants - 1 Supplying and 1 receiving
    > > -Receving plant is created as customer in XD01
    > >-Material is created in both the plants
    > >-All the IMG settings are done both at MM and SD parts
    > >-STO PO is created with doc.type "UB" in ME21n
    > >-In VL10B OBD is created wrt PO number & PGI is also done here
    > >-In VF01 commercial invoice is created (Here all the excise duties like BED, AED, SED are calculated and PR00 is statistical)
    > >-Excise invoice is created wrt Commercial invoice
    > >-Now in J1IEX I have to give both STO PO number and excise invoice number. When I give the excise invoice number, all the duties are flowing but when I give the STO PO number the BASE VALUE is not flowing.
    Let me know if you require any more details from my end.
    Regards
    Ayyallas
    Edited by: ayyallas on Nov 13, 2009 5:41 AM

  • Correct values not flowing in MIRO when values are changed in J1IEX

    D/ Friends,
    In Purchase Scenario with mov typ 101, when we capture excise duty thru T.Code J1IEX, sometimes we need to change the Duty Rates as well as Excise base Value (i.e.***. Value). We change these 2 things & we also change the BED, ECess & SH Cess values manually. Thereafter we do GRN & then post the EI.
    Now the issue is that when we do MIRO, the duties Posted in EI in J1IEX, are not flowing in MIRO. Pls note that such scenario is occurring only when we change the above 2 things in J1IEX. Pls advice.
    Rgds.

    pl check excise defalt for your tax procedure  JCV1  condition assigned  or  not.
    regards
    karthik

  • Changed JAOQ values not flowing from J1IEX to MIRO

    Dear CIN experts,
    We are having Dealers excise invoice capturing scenario in our implementation.
    Here, we are capturing ADC for imported scrap at the time of posting J1IEX, which is not known at the time of punching PO. a nominal value has been maintained using JAOQ condition type.
    While posting J1IEX, the actual excise values (BED, ECESS and SECESS) as in Traders excise invoice is captured including ADC.
    All the values except AED (captured ADC) is flowing from J1IEX to MIRO, where as AED (JMOQ) is being picked up from Purchase order.
    But this is not the case if JAOP is used to capture ADC in tax procedure. the changed AED value in J1IEX is flowing to MIRO.
    Is this SAP standard behavior or is that SAP has not tested these scenarios?
    kindly help to solve the issue.
    Thanks in advance.
    Ashwin..

    Hi Shankar,
    Thanks for the reply.
    well, AED is almost non existent now. at least not in the scenario i have explained. this is about procurement of Metal Scrap. so the SAD that the import vendor has taken credit of is transferred to us through a dealer.
    with JAOP, i can increase or decrease the value of AED mentioned in PO. but this is not happening with JAOQ (value condition).
    With JAOQ, the value flows from PO, with JAOP, the value flows from J1IEX.
    please let me know, if you require any more clarification on the above scenario.
    Thanks again for the help
    Ashwin.

  • PS - PO Excise Value not deducted from Project Available Budget

    Hello SAP Gurus,
    My problem is that when an Excisable PO is created against SAP Project then the Excise Value is not included in Budget - Commitment/Actual Amounts.
    PO Basic Value + Tax (VAT/CST) is deducted from Available Budget, but Excise value is not deducted even after Invoice Booking.
    Please let me know where do I need to change so that the complete PO value is deducted from Available Budget.

    Hi Bindal,
    Origin of Project costs lies in other modules.
    Pls get you Tax procedure checked by FI/MM. In Tax procedure there will be various Conditions used by your organization. Each Condition type will have an Account Key.
    If that account key has 'Non Decutible' checked then the related tax amount will form cost on your project and vice versa.
    if your organization is producing something using thses input materials then it would want to benifit itself by taking credit for Modavat/Cenvat against the Excise and other recoverable taxes it paid during the purchase of input materials.
    Hence as a correct business practise such taxes will be correctly set as 'Dedutible' in Tax settings so that instead of getting inventorized the'y be offsetted and amount would be posted to some clearing amount.
    In short MM would (correctly) not recognize these taxes amounts as cost and thus these values will not flow to PS also as Commitment cost or actual/statistical cost.
    with regards,
    Ravi Shrivastav

  • Excise duties not flowing in vendor return

    Hi All,
    I am craeting a return delivery in MIGO by referring the old MIGO document ( 122 Movement type)
    I can excise  invoice tab and duties are flowing correct.
    Next when i create excise invoice in J1IS be referring the return delivey docuement excise duties are not flowing .
    How to fix this issue?
    Yash

    Hi ,
    Did you follow this steps :
    Creation of Excise Invoice creation through J1IS:-
    1) Screen 1 - Enter the following details:- MATD , Material Document no. (122 mvt type) ,Doc Year, Series Group , Excise Group,Vendor.
    2) Screen 2 - From the Top select the option "Excise Invoice Selection". By clicking on this system gives the list of Incoming Invoice against which you want to return your goods.If you are not able to view your Excise invoice , there will be a option called Selection criteria , in that remove the no. of days and make it to blank.Select the incoming invoice against which you want to return your goods and click continue.All the duties gets calculated as per your original incoming excise invoice. Check the duties and save the transaction.
    Please check and confirm the same , as this may solve your problem.

Maybe you are looking for