Problem in creating Internal order (Transaction KO01) through LSMW

When I am processing the session of internal order creation (KO01) in background I am getting the below error.
Session FI_INT_ORD_C is being processed by user XXXXXX in mode N on server XXXXX.
It is running properly when I execute the session in foreground. Could you please help me on this?

Hello,
Check in SM37 if any background is scheduled, if you dont have authorization for the t-code ask yor basis guy to look into it.
Try to see wht that background job is doing, and if possible, if you can hault this background job and then try your job
Regards,
Abhishek

Similar Messages

  • Error while creating internal order

    Hi,
    I have defined an Order type for budgeting purpose, so that statistical internal orders be created under that order type.
    This is required for budget controlling.
    Now I am not able to create internal order in Ko01.
    I am getting the below error message:
    Internal Orders: Profit Center  not allowed
    Message no. Z1052
    Please guide me how to create statistical internal order for new order type defined.
    Thanks & Regards,
    Divya

    hi
    goto oke5 actovate u r contorling area for year base  and also asiisgm dummy profit center., u can make settings in this path,
    sap img- controling-profit center accounting-besic settings -contoling area setting-maintain controling area setting, this sceern u activate year wise ,a nd also assign profit center.
    and u dont define profit center goto same path -masterdata- prifitcent - define profit center.
    first u settings completed,
    other wise u contact ur fico consultant
      regards
    sankar.

  • How to make Classification entry pop up while creating internal order(KO01)

    Dear All
    I need to have the characteristics values of the class assigned to my internal order POP UP during the Internal Order Creation (KO01)
    I have activated the necessary config and the class , characteristic and characteristic value is able to generated successfully.Also, I have activated classification in order type.
    I have  make the characteristic value as Required Entry but it still does not pop up to ask me for entry, instead it just shows a general message as follows:
    +Status changed: missing values for required chars in TM0000000002OR
    Message no. CL500
    Diagnosis
    You want to save an allocation to a class with released status. However, the class contains characteristics for which an entry is required.
    System Response
    The system changes the status of the allocation to incomplete.
    Procedure
    If you want to save the allocation with released status, first you must assign values to all the required characteristics. Then you can set the status you require.
    Note
    The classification status affects functions such as the find objects function. You can define whether objects with incomplete classification status are included in the search result.
    If the classification status of a configurable material is incomplete for an allocation to a class, this does not affect configuration.+
    Please advise. Thanks.

    Hi,
    Have you installed the Software Component
    /QAS/AXO     46C      0000   -                   QuickAddress for BAS
    You can check this in transaction SPAM -> package level.
    BR

  • Problem while Creating Service order through Work Order

    Hi Gurus,
    I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
    So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n)  which automatically should be picked from the work order refference.
    But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
    Can anyone explain me this?
    Is this something that one can explain?
    Regards,
    Murugesh R
    Rewards for value replies.

    Closed..

  • Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

    Hi
    We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    this is the log:
    +---------------------------------------------------------------------------+
    Purchasing: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    POCISO module: Create Internal Orders
    +---------------------------------------------------------------------------+
    Current system time is 26-JUL-2013 09:21:09
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Begin create internal sales order
    Updating Req Headers
    14 Reqs selected for processing
    Top of Fetch Loop
    Source Operating Unit: 82
    Selecting Currency Code
    Currency Code : MXP
    Selecting Order Type
    Order Type ID:1001
    Selecting Price List from Order Type
    Deliver To Location Id: 196
    Inserting Header : 3908784
    Getting the customer id
    Getting the customer id: 15334
    Unhandled Exception : ORA-01403: no data found
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    78
    Output is not being printed because:
    The print option has been disabled for this report.
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 26-JUL-2013 09:21:14
    +---------------------------------------------------------------------------+
    Some suggestion for resolve it??
    Thanks & Regards.

    In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
    When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
    If yes, please let me know the path and command to set the kernel value.
    Thanks
    Amith

  • Problem while creating Service order

    Hi Gurus,
    I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
    So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
    But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
    Can anyone explain me this?
    Is this something that one can explain?
    Regards,
    Murugesh R
    Rewards for value replies.

    Hi Murgesh,
    If GL code is not getting bydefault from the system it is needed to be provided by the user.
    If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
    it is avalible in deafult settings in order node
    If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
    But if your PO is not w.r.t. PM orders PR then needs to be given manully.
    Ramesh
    Edited by: RameshChandra  Soni on Jul 25, 2008 8:16 AM

  • PSL not creating internal orders in ECC

    Hi
    We have a scenario were we are creating a Product Service Letter of type 'PSLH'.
    We are creating Service Orders based on a template attached to this transaction type.
    We also need to capture the cost for this PSL Type. But the system is not creating internal orders in ECC to capture the costs.
    Please guide as to how the cost capture can work for product service letters of type 'PSLH'.
    Regards

    Hi,
    Please check the below link.(Controlling section)
    http://help.sap.com/saphelp_crm50/helpdata/en/c1/704348030bc64b8b40118e10ad98f1/frameset.htm
    as per this, integration of PSLH with ECC is not present, you may have to custom code it.
    Regards,
    Krishna

  • When we create internal order of mobile

    Hi All,
    when we create internal order of mobile then the shown are error messages that number is not within valid enterval. Firstly over company mobile expenses are on reliance what we move in airtel.
    plz solve the problem.
    Moderator: Please, avoid asking basic questions

    Hi,
    check what number range has been setup for order type in which you are creating internal order.
    regards,
    Prashant Rane

  • Steps to create Internal Order with AUC Number

    Dear All,
              We need to create internal order with AUC number.Kindly provide us the steps to do the configurations. Kindly guide the steps to be followed for creating internal orders with AUC number and way to do the settlement.

    Dear Kishore,
    I am doing the following steps in creating internal orders:
      1) Using the tcode KO01, choosing the order type as GEN i am creating an internal order. At the time of creating an internal order i need to give AUN number. Hence i am going to Extras--> Asset Under Construction by giving the investment profile. When i enter it nothing is happening. I am unable to create AUC no manually.
    Since i am a beginner, plz guide me to create AUC no while creating internal order.

  • Problem on creating process order

    Dear Team,
    I have a problem on creating process order thru COR1 where the basic start date only accept and follows current date. Basic finished date, no problem. Previously, i can set the basic start date using previous date / date in the past (in the same current month). I'm using "Only capacity requirements" for scheduling type.
    is there anywhere in the SAP config that i can check?
    and why this problem occured?
    Thanks

    Dear Tallha,
    Here is screenshoot of my process order. the basic finished date is automatically changed to current date. (date entered 1/5/2014)
    Thanks

  • Business Area required while creating Internal Order

    Hi Gurus,
    While creating Internal Order, Business Area is coming required.
    Please tell me how can i make it as a optional field.
    Please revert asap.
    Thank you

    gverma,
    While making the Internal Order, you are using a company code that intends to create business-area balance sheets. This is why you must enter a business area.
    You can see this text if you double-click on the error message that flashes on your status bar at the bottom of your screen, when SAP says "Enter the business area".
    Unfortunately, the only way to make this optional is to de-activate Business Area-wise financial statments for your company code, which, I suspect you might not want to do merely to be able to make an Internal Order with a BA.
    Regards
    Gulshan

  • Is there any Web Service to create Internal Order?

    Hi,
    I have to find out a suitable Web Service which can create internal order. I have searched in SOAMANAGER but did not find any such WS. Does anybody have an idea whether there is any such WS?

    Hi Tirth,
    If you are using a bapi for webservice then these threads may help you.
    How to create WebService from BAPIs
    How To Expose BAPI As a Webservise
    If you are creating your own webservice then create an application in java,then expose it as webservice.
    Regards
    Sreedhar

  • Problem in creating Maintenance Order with multiple operations

    Hello all,
    I am facing problem while creating Maintenance Order with multiple operations and sub-operations. I am using BAPI : BAPI_ALM_ORDER_MAINTAIN.
    For single operation it is working fine,but i am unable to create MO with multiple operations and sub-operations.
    Please, provide me the inputs required,
    I have used methods :
    ORDER        CREATE,
    OPERATION CREATE
    and SAVE.
    Regards,
    Siddhartha

    Hi,
    The FM you are using is a perfect one. This FM is bit tricky to use. You need to perfectly pass the Reference number field. which links various input table parameters of this FM.
    Thanks & Regards,
    Navneeth K.

  • Create internal order

    hello,
    I'm trying to create an internal order with bapi "BAPI_INTERNALORDER_CREATE". I wish that the internal order will settle to profitablity segment (PSG) and I figure there is no way to do it (while I manage to create internal order which settle to cost center).
    best regards,
    Ronen & Yaron.

    Hi,
    I did the link between order type and automatic generation of settlement rules (I connect order type PRJ1 to strategy 02).
    When I open a new internal order from type PRJ1 manually it is work fine but when I tried to do it with the BAPI I get the following error message:
    'Enter a distribution rule for Profitability segmnt without a validity limit'
    Did I miss something here.
    Thanks in advance,
    Ronen.

  • Screen exits for transaction KO01 (Create Internal Order)

    Hi Experts,
    I would like to enchane the screen of transaction KO01 by adding one new field.
    I am able to find the enchacement names (COOPA003) and I have already implemented it by creating project in CMOD.
    I have also added the new field in structure CI_AUFK of table AUFK.
    But the problem is I dont know how to attach the new sub screen to this existing transaction.
    So can any one please help me on this issue.
    It is very urgent.
    Thanks in advance.
    Regards.

    Hi Wasim,
    As I mentioned in my earlier reply go to SPRO -> CONTROLLING -> Internal Orders -> Order Master Data -> Screen Lay out -> Define Order Layouts
    Select the existing layout and and double click on Position Group boxes. Here you can see a group box called "User Defined Fields".
    First please read the documentation avaialable under the SCREEN LAYOUT option in SPRO. You will understand how can you have custom subscreens or fields.
    Thanks,
    Anil.

Maybe you are looking for