Excluding types with Apache 1.3 WLS Plugin for 8.1
We're running the Apache 1.3 plug in for WLS 8.1
<IfModule mod_weblogic.c>
WebLogicCluster pfate:7000,pfate2:7000
MatchExpression *.jsp
MatchExpression *.do
</IfModule>
<Location /eCMS>
SetHandler weblogic-handler
</Location>
It's my understanding that this should basically only let WLS handle the JSP
and Struts .DO actions.
But, we have other files that all seem to be going to weblogic for
servicing.
Specifically, we have an Apache module that is tied to a different
extension, but that module is not being called if the extension lives within
our "/eCMS" Location.
The module is called for files outside of the /eCMS Location.
Can someone provide some examples on how we can get this integration to
work?
Thanx!
Regards,
Will Hartung
([email protected])
You don't need the <Location /eMCS> block since you're proxying by mime type. Remove it and you should be ok.
Similar Messages
-
Apache 1.3.x plugin for WebLogic 6.0 SP2
I am in search of Apache HTTP 1.3.x plugin for WebLogic app server 6.0 SP2, Is
it available or certified by BEA? - Thanks in advance for your views and answersYou don't need the <Location /eMCS> block since you're proxying by mime type. Remove it and you should be ok.
-
CS 2 Problem with getting it to update plugin for Camera Raw
Hi,
I am feeling a little stupid today as I have to go back and use cs2 because my iMac is broken and I only have cs2 installed on my old powerbook, but as all will know cs2 does not support Nikon D300 raw files and I have tried dragging the update 3.1 into the plugin folders as well as update 3.7 but nothing is helping so I need someone else's help. So help please.
DonHi,
Thanks for the link I am hopeful it is going to help but my problem now is that when I bought CS2 a few years ago I upgraded from PS7 to CS2 and would you believe it when I try to reinstall CS2 it now wants this serial number for PS7 and after so many years I am not sure that I still have this program so now I am stuck between a rock and a hard place. When I purchased the upgrade I did register it with Adobe so perhaps someone out there has a suggestion of how to proceed next. It is a blue Monday indeed.
Don -
Problem with central build of Simple Date Type with Enumeration
Dear gurus,
I hope I'm posting this in the correct forum. Please advise if I'm in the wrong forum.
I have a Web Dynpro DC in which I've created a simple data type with enumeration. It is used for binding to a radio box. The data type is called DownloadType; the enumeration contains two vales: current and archive. To allow me to access the enumeration values, I turn on the "Generate a class representation of the enumeration" in the data type builder.
I then reference the enumeration values with code like:
if (downloadType.equals (DownloadType._CURRENT))
yada yada yada
This works fine when building locally and deploying directly. But when the DC is built by CBS (or doing a "Development Component->Build..." in NW Dev Studio), the build fails, stating that the DownloadType._CURRENT symbol cannot be resolved.
For example:
C:yadayadayada.java:227: cannot resolve symbol
symbol : variable _CURRENT
location: class yadayadayada.DownloadType
equals(DownloadType._CURRENT)) {
Apparently the central builder is not smart enough to handle the "Generate a class representation" flag.
Is this a known problem? Are there any workarounds?
Thanks in advance for any help you can provide.
-Kelly
P.S. Environment: 2004sHi Kelly,
works for me using SP10, what SP are you on?
There's a line in the DC log that says:
[ddgen] [Info] Generating datatypes/com/x/x/x/MyEnum.java
and the java compiler includes the matching path for compilation:
[echo] source paths:
[echo] ...\_comp\src\packages
[echo] ..\t\ABF37B5AFB3B2E8A76FFD29E7862EA48\gen_ddic\datatypes
Regards,
Marc -
Flash plugin for Firefox: 2, 3 speed audio?
Hi all,
I am having problem with audio using the flash plugin for Firefox. The video
is OK but the audio seems to be played at double or triple speed, which sounds
funy.
Here is the address:
http://news.com.com/1606-2_3-6052333.ht … &subj=news
Anybody else had this problem before?its playing in the background right now and sounds fine. Motion is a little jerky but acceptable.
using the 2.6.16 kernel from testing firefox from current over a DSL line.
Is the rtc module loaded? Otherwise at a loss (as usual)
BTW, that VW system is the last thing I need in my truck. Would rather have a cup holder that works and a first gear that does not lose sync. -
Intermittent problem with weblogic plugin for Apache
Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
AaronEnv: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron -
Looking to pass a "root" request to a WL server with Apache plugin
Anyone know of a way to disclude a URL from the <Location> directive? I'm
using the Apache plugin and would like to pass all requests through to the
WL server except the images (which can be identified either by extension or
by location (/images)). I want a request for http://apacheserver/ to get
passed to the WL server and execute some default servlet. However... if I
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Any ideas?Thanks for the help.
Two location directives:
<Location /myApp> and
<Location /myImages>
would end up passing my images request through to WL, no?
The way I have it set up now, I have one tag:
<Location /myApp>
which (obviously) passes the /myApp/* requests to WL. This is good...
any other request such as /images/myimage.gif stays on the web server. The
only problem is that
the initial hit to the site (www.mycompany.com) does not get passed through
and
I need it to map to a servlet on the WL server, without disrupting the flow
of a
/images/* request.. I have no images on the WL server.
Anyone know of a way to disclude a URL from the <Location> directive?I'm
using the Apache plugin and would like to pass all requests through tothe
WL server except the images (which can be identified either by extensionor
by location (/images)). I want a request for http://apacheserver/ to
get
passed to the WL server and execute some default servlet. However... ifI
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Have your application reside at /myApp and images in /myImages. Then two
<Location> stanzas,
one for /myApp and one for /myImages will do what you want. I have an
open case with support
where I wanted /myApp/myImages and /myApp to resolve in the order the
<Location> directives
were found in httpd.conf, in much the same way you can have / and
/images with
Apache handling /images and WLS handing / . The case is still open and
the workaround is
described in the first sentence of this paragraph :) -
URL for apache plugin for linux with weblogic 6.1
Hi,
can anyone tell me, where i can find the apache plugin for linux weblogic 6.1
thanks in advance,
cheers chrisCould you give some detail for this issue? I have tried the plugin with IIS6 and it does works.
-
Setup issues: Apache plugin for Weblogic
Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
<Location /AppConsole>
SetHandler weblogic-handler
</Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D -
Netscape or Apache plugin for WebLogic
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)Hi, Michael,
Thanks for help. I found the documentation and installed the
libproxy.so. However, the server reported internal error when I tried to
use it. Do you have any idea what I did wrong?
The following were added to obj.conf :
Init fn="load-modules" funcs="wl-proxy,wl-init" \
shlib="/home/ns-home/plugins/weblogic/libproxy.so"
Init fn="wl-init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl-proxy WebLogicHost=hercules.incyte.com \
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
error log says:
[20/Apr/2000:17:56:06] info (18864): successful server startup
[20/Apr/2000:17:56:06] info (18864): Netscape-Enterprise/3.6 SP2
B99.113.0837
[20/Apr/2000:17:56:06] verbose (18864): dstats: Using slotbase = 0 start
= 0 end = 1024 last = 0 slots pid = 18864
[20/Apr/2000:17:56:28] config (18864): for host 10.49.2.229 trying to
GET /weblogic/index.html, func_exec reports: no handler function given
for directive
Thanks,
Wayne
Michael Girdley wrote:
>
That is the correct one. You should refer to be documentation on installing
our plug-ins.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi, Micheal,
Thank you very much. I found them. They are all *.dll files. I seems to
have the impression that BEA support both NT and solaris. Keep looking
I also found a file called libproxy.so in the weblogic/lib/solaris
directory. Is this the one I need? If so, what do I need to do to
install?
Thanks,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Michael Girdley wrote:
It is available in the Weblogic/bin directory in your distribution if I
remember correctly.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I
install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Incyte Genomics Inc.
650-845-5784 (direct) / 650-621-8655 (fax) -
I have created an ear for wls using apache cxf 2.2 for web services.
It deploys and works properly on my development machine, windows & jdk 1.6
However when I try to get it to run in my production environment starting the application
fails with the stacktrace below. Production system is RHEL5 x86_64 with jdk 1.6.0_10
I'm at a loss on how to even start troubleshooting this.
Any help is much appreciated
weblogic-application.xml
<prefer-application-packages>
<package-name>antlr.*</package-name>
<package-name>javax.jws.*</package-name>
<package-name>javax.namespace.xml.*</package-name>
<package-name>javax.xml.soap.*</package-name>
</prefer-application-packages>
weblogic.xml
<container-descriptor>
<prefer-web-inf-classes>false</prefer-web-inf-classes>
</container-descriptor>
####<Apr 27, 2009 1:35:56 PM PDT> <Warning> <HTTP> <r01dvrappx01.r01.med.va.gov> <llvamc-web> <STANDBY ExecuteThread: '3' for queue: 'weblogic.kernel.Defau
lt (self-tuning)'> <<WLS Kernel>> <1240864556825> <BEA-101162> <User defined listener org.springframework.web.context.ContextLoaderListener failed: org
.springframework.beans.factory.BeanCreationException: Error creating bean with name 'wsPerformanceMeasureService': Invocation of init method failed; nested e
xception is java.lang.LinkageError: loader constraint violation: loader (instance of weblogic/utils/classloaders/GenericClassLoader) previously initiated loa
ding for a different type with name "javax/xml/soap/MessageFactory".
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'wsPerformanceMeasureService': Invocation of init method failed; neste
d exception is java.lang.LinkageError: loader constraint violation: loader (instance of weblogic/utils/classloaders/GenericClassLoader) previously initiated
loading for a different type with name "javax/xml/soap/MessageFactory"
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1337)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)After research by Oracle Support it actually turns out that this problem was a combination of factors:
1) some clients were effectively using an invalid certificate so it is corrrect they got an error and everything worked fine when they started using the right certificate
2) it does, however, turn out that, in the case of an error the error handling has been obfuscated in WLS 10.3.6 as compared to WLS 10.3.4 which gives a more descriptive error stating the nature of the problem (missing certificate, invalid certificate, unknown user, ...). Apparently this was deemed a security issue and has thus been replaced by a generic "internal server error". It is however possible to re-activate this older behaviour using a couple of JAVA_OPTS that you pass during server startup:
-Dweblogic.wsee.security.debug=true -Dweblogic.wsee.security.verbose=true
The above reintroduced the behaviour we had in WLS 10.3.4 and thus solves our problem! -
*malformed status 1* @WLS plugin
hi all,
we are facing this kind of error in webserver site
we spent two weeks in googling , but no enoug resources,
could you please give a detail , when this error happens,
[Fri Mar 20 22:04:59 2013] [error] [client ******] ap_proxy: trying POST ***** at backend host ****/***; got exception 'PROTOCOL_ERROR [line 848 of ../nsapi/URL.cpp]: malformed status 1', referer: https://*****/*******
errlog says...
wls-plugin log
Wed Mar 20 22:04:59 2013 <5072513638098992299> *******Exception type [PROTOCOL_ERROR] (malformed status 1) raised at line 848 of ../nsapi/URL.cpp
Wed Mar 20 22:04:59 2013 <5072513638098992299> sendRequest: exception caught while parsingHeaders w/ recycled connection to 10.210.50.219:55515, numfailures=1
Wed Mar 20 22:04:59 2013 <5072513638098992299> Marking ***** as bad
Wed Mar 20 22:04:59 2013 <5072513638098992299> got exception in sendRequest phase: PROTOCOL_ERROR [line 848 of ../nsapi/URL.cpp]: malformed status 1 at line 3160
Wed Mar 20 22:04:59 2013 <5072513638098992299> NOT failing over after sendRequest() exception: PROTOCOL_ERROR
Wed Mar 20 22:04:59 2013 <5072513638098992299> Redirecting the error response to the errorPage = [****]
Wed Mar 20 22:04:59 2013 <5072513638098992299> request [****] did NOT process successfully..................We were able to avoid the PROTOCOL_ERROR by turning off the connection pooling in obj.conf (KeepAliveEnabled="false"). We're using Weblogic 8.1.5 and testing on 8.1.6, where the error still seems to exist. This issue is only occuring with IE 6 & 7 with pooled connections. FireFox doesn't seem to have any issues with the pooled connections at all. This is not an optimal workaround for us when we go to production because of the likely performance implications turning off the pooling will have.
I can't see anything in the request headers coming from the two different browsers that looks conspicuous...they're almost identical. Is there any kind of user agent specific processing going on in the plugin that could be causing something like this? -
Hi All,
I noticed that there is an Apache plugin for WebLogic 5.1, but it is only
for Apache running on Solaris. Has anyone successfully integrated Apache
running on NT with WebLogic 5.1 running on NT? Also, has anyone
successfully integrated Apache running on NT with WebLogic 4.5.1 running on
NT? If so, how?!?
Thanks!
Elaine
Ideally, we would love to do so. However, there are two major reasons why
we cannot release the source code. These are:
1 ) supportability: It is very difficult to support our product like
Weblogic because it is a development platform. It makes for a support
nightmare on occasions when we are not certain what exact code our customers
are running. Providing the source code to the proxy plug-ins could make
solving customer issues very difficult when customers modify the source code
and recompile.
2 ) trade secrets: Our company has invested much effort in research and
development for these plug-ins. Unfortunately, our competitors can easily
steal away our investment if we provide the source code to our plug-ins
publicly or distribute them widely.
There are instances in which we might be able to provide the source code.
However, we typically do not do it as a policy. You should contact your
account manager to further discuss the situation.
Thanks, Michael
Michael Girdley
WLS Product Manager
Stephen Earl <[email protected]> wrote in message
news:[email protected]...
> Michael,
>
> Is BEA willing to release the source for the proxy plugins to enable
> developers to enhance their functionality?
>
> Steve...
>
> "Michael Girdley" <[email protected]> wrote in message
> news:[email protected]...
> >
> >
> > We currently do not have an Apache plug-in for Windows NT as a high
> > priority. This is primarily because the Apache version for NT is still
> > listed as "less stable" then those for other platforms.
> >
> > We will be doing ports of the plug-in for other platforms. If you have
> > questions about which ones those will be, please do contact your account
> > representative.
> >
> > Thanks,
> >
> > --
> > Michael Girdley
> > WLS Product Manager
> >
> >
> >
> > Elaine Herren <[email protected]> wrote in message
> > news:[email protected]...
> > > Hi All,
> > >
> > > I noticed that there is an Apache plugin for WebLogic 5.1, but it is
> only
> > > for Apache running on Solaris. Has anyone successfully integrated
> Apache
> > > running on NT with WebLogic 5.1 running on NT? Also, has anyone
> > > successfully integrated Apache running on NT with WebLogic 4.5.1
running
> > on
> > > NT? If so, how?!?
> > >
> > > Thanks!
> > > Elaine
> > >
> > >
> >
> >
>
>
-
Integarte Weblogic with Apache on Windows
Hi guys,
Did any one integrate Weblogic server with Apache?
I tried but portal home page takes a lot of time to load.
I don't know why?
If any one tried this can you let me the know the steps or URL from where I can get info?
Thanks!Here are some links that might be helpful
http://e-docs.bea.com/wls/docs81/plugins/overview.html
http://e-docs.bea.com/wls/docs70/plugins/apache.html
Seenu. -
Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
Maybe you are looking for
-
How can I change an American Itunes Card into a UK one?
So I found this cool version of Genroku Hanami Odori by a group called Waraku Ensemble, but it's only avalible in the UK stores and I live in the US. How can I convert an American Itunes card into a UK card?
-
How can I remove ASCII text from a field when I use it in a query
How can I remove ASCII text from a field when I use it in a query? I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns: SEL
-
Dear PM Experts, I want to create a counter in (IK01) for preventive maintenance plan of Compressor which require the CHARACTERISTIC (HRS),and i had created my own characteristic in CT04 but the counter dose not work properly. So please help me in cr
-
I have Adobe Acrobat 9 standard installed. I am trying to rotate 1 page out of a 50 page pdf document. Documents -> Rotate Page feature is grayed out. And so is Pages -> Rotate Page. Is this feature not available in AA 9 standard? Is there another wa
-
Dear Gurus, I have this InfoSpoke that works just fine in DEV. When it got transported to PROD, the extraction is showing 0 records and it says error occurred in monitor. But it doesn't show any details. Where will look to check the details of those