Exclusively locked files warning during startup on my A100 Satellite

I get a warning about (at least?) 2 exclusively locked files occuring during startup. How do I identify them and how do I "unlock" them? I am not going to ask how they got exclusively locked.
I have tried updating the bootup file but I'm told by the updater that my bootup file is identical to the update.
I have done a complete Vipre scan which has pronounced my laptop to be clean.
Thnaks,
John

Which Satellite A100, John? What's the part number?
Which Windows?
Please quote the precise message you get on startup. Put it on a line by itself. No paraphrasing. Spelling counts.
-Jerry

Similar Messages

EJB Warning during startup

Hi All
when i restart my servers I found this warning. Does it affect the performance. And what are the possible causes and alternatives if they are affecting performance?
<Oct 26, 2009 6:36:04 PM CDT> <Warning> <EJB> <BEA-010212> <The EJB 'RMEJB(Application: SMMN-2024, EJBComponent: RMSessionEJB.jar)' contains at least one method without an explicit transaction attribute setting. The default transaction attribute of Supports will be used for the following methods: remote[getRate(com.ly.rm.common.vobject.RMRequestVO,java.lang.String), getRateOwn(java.lang.String,java.lang.String)] local[getRate(com.ly.rm.common.vobject.RMRequestVO,java.lang.String), getRateOwn(java.lang.String,java.lang.String)] >
Thanks
With Regards

Hi,
This is because you didn't specify the transaction attribute explicitly, based on the requirement of EJB Spec, WebLogic server will assign a default value to your methods.
If you worry about the performance, you can specify the transaction attribute for every one of them with annotation or deployment descriptor.
E.g.
<ejb-jar>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>EmployeeRecord</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
Thanks,
Amy

Migmon: Lock file ExportMonitor.lck is locked during export

Hello,
I am trying to export my DB since I will move it to another system. I have done that before (2008) but not with Migration Monitor since I could not get it to work. At that time I could choose R3load-based method and everything went fine.
This time I don't have that option so I must try to fix my problem.
I have HP-UX 11.23 running on IA64.
If I try to run ./export_monitor.sh (or ./sapinst and skip the table splitting function) I get this result:
+ /opt/java1.4/bin/java -showversion -Xmx1024m -cp
./.:./migmon.jar:./activation.jar:./mail.jar com.sap.inst.lib.app.
SecureStartup -Xmx1024m com.sap.inst.migmon.exp.
ExportMonitor -dbType ORA
java version "1.4.2.17"
Java(TM) 2 Runtime Environment, Standard Edition
(build 1.4.2.17-071106-02:40)
Java HotSpot(TM) Server VM
(build 1.4.2 1.4.2.17-071106-08:12-IA64N IA64, mixed mode)
Another instance of application is already running.
Lock file 'ExportMonitor.lck' is locked by other process.
If I use the sapinst and set it to split the files I get "Lock file 'PackageSplitter.lck' is locked by other process.".
But the file is NOT used by another process!
I use root and yes the users SIDadm and oraSID are in the group sapinst and yes I have set the permissions to 777 and yes the umask is 022 and yes I have downloaded the latest migmon and decompressed it to these locations (I picked all three just in case):
tmp/sapinst_exe.13660.1280391575/JAR
tmp/sapinst_exe.13660.1280391575
/InstMst_701/IM_HPUX_IA64.
If you smart people know how to fix this I would be very happy and also impressed. I have no idea what to do and my message to SAP is still not answered...
Best regards Linus Hellsing
Edited by: Linus Hellsing on Jul 29, 2010 11:04 AM

Hi Peter, thank you for answering.
No, I have not done a fuser on the file. But I have tried to edit it and that works just fine.
I also have restarted the server, just in case.
But now when I am writing this something nice has happened.
On the server I am testing I have HP-UX 11.23 but my production servers have 11.31 so I tried to start the export on that server (scary). It seems to work!! Sadly I must export all of my systems but this makes me believe theat it is the OS that is old or don't have enough patches.
swlist on my old server tells me that I am missing a couple of patches compared to SAP Note 837670. I think I have to call the HP-UX department at my office... Um wait, that would be me since it is vacation season....

Issue with lock file in Oracle 10g app server - MDB not running

Hi,
I have Oracle 10g & MQ 6 on my laptop. I generated JNDI bindings for app server-MQ by giving ip address of my machine first. Then i changed it to "localhost" & generated new set of .bindings file.
With this new set i am able to send messages from my program to a queue. I also have an MDB which should listen to the same queue.
However now my mdb is not listening to the queue & i suspect it is due to host address change, - because each time i start the server, i see a lock file created "OracleASRouter_store.lock" - under j2ee\home\persistance. And below is the content of the same -
"O10.1.4.245:/C:/Program Files/Oracle/oc4j_extended_101330/j2ee/home/persistence/"
As per few suggestions on this site, I deleted this file & restated app server, deleted whole content of persistance folder, restarted app server. But each time i see this file created and also see the ip address in log.xml under j2ee\home\log\oc4j
Error message in this log.xml file is
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.265-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02009</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] Unexpected exception by JMS provider: javax.jms.MessageEOFException: initializeConnection.</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.jms.MessageEOFException: initializeConnection
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1075)
     at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1155)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:154)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:110)
     at com.evermind.server.jms.TCPJMSRemoteServer.<init>(TCPJMSRemoteServer.java:68)
     at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:122)
     at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:70)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:101)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:44)
     at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:81)
     at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:78)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:69)
     at com.evermind.server.ejb.MessageDrivenConsumer.createNonXAResources(MessageDrivenConsumer.java:567)
     at com.evermind.server.ejb.MessageDrivenConsumer.initializeJMSResources(MessageDrivenConsumer.java:491)
     at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:208)
     at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.EOFException
     at java.io.DataInputStream.readInt(DataInputStream.java:358)
     at com.evermind.server.jms.JMSRemoteServer.readCheck(JMSRemoteServer.java:678)
     at com.evermind.server.jms.JMSRemoteServer.readProtocol(JMSRemoteServer.java:696)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:134)
     ... 16 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.312-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02014</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] All message consumer threads have terminated due to provider errors, stopping MDB.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
And my MDB is NOT WORKING. Please let me know how to deal with this.
Your suggestions would be much appreciated.
Regard,
Chetan

Line # 127 is creating a new application object using ApplicationFactory.
ApplicationFactory aFactory =
(ApplicationFactory) FactoryFinder.getFactory(
FactoryFinder.APPLICATION_FACTORY);
application = aFactory.getApplication();
The only way that can throw a null pointer is when aFactory is NULL. I really doubt this case because, the same thing is doen in init() of FacesServlet. If it had failed there, the exception should have occured during server startup.
This leaves me more and more confused....I am desperate for some help now :((
Ramesh

R12: "FRM-92101:There was a failure in the Forms Server during startup"

LINUX VERSION:
[oracle@USSLTC3118V StageR12]$ cat /etc/*-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
LOGS:
$/ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/j2ee/forms/forms_default_group_1/application.log:
12/06/07 08:55:15.661 formsweb: Forms session <11> aborted: unable to communicate with runtime process.
12/06/07 08:55:15.663 formsweb: Forms session <11> exception stack trace:
java.lang.StringIndexOutOfBoundsException: String index out of range: -6
at java.lang.String.substring(String.java:1938)
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
12/06/07 10:02:25.980 formsweb: Forms session <12> aborted: unable to communicate with runtime process.
12/06/07 10:02:25.980 formsweb: Forms session <12> exception stack trace:
java.lang.StringIndexOutOfBoundsException: String index out of range: -6
at java.lang.String.substring(String.java:1938)
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
[root@USSLTC3118V VIS]# cat ./inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
12/05/31 11:52:36 FormsServlet init():
configFileName: /ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
12/05/31 11:52:36 Oracle Containers for J2EE 10g (10.1.3.4.0) initialized
12/06/05 16:23:05 ListenerServlet init()
12/06/05 16:23:09 Forms session <1> failed during startup: no response from runtime process
12/06/05 16:23:32 Forms session <2> aborted: unable to communicate with runtime process.
12/06/06 09:23:04 Forms session <3> aborted: unable to communicate with runtime process.
12/06/06 10:48:47 Forms session <4> aborted: unable to communicate with runtime process.
12/06/06 12:43:05 Forms session <5> aborted: unable to communicate with runtime process.
12/06/06 19:48:33 Forms session <6> aborted: unable to communicate with runtime process.
12/06/06 19:49:04 Forms session <7> aborted: unable to communicate with runtime process.
12/06/07 08:43:26 Forms session <8> aborted: unable to communicate with runtime process.
12/06/07 08:46:39 Forms session <9> aborted: unable to communicate with runtime process.
12/06/07 08:52:56 Forms session <10> aborted: unable to communicate with runtime process.
12/06/07 08:55:15 Forms session <11> aborted: unable to communicate with runtime process.
12/06/07 10:02:25 Forms session <12> aborted: unable to communicate with runtime process.
[root@USSLTC3118V VIS]#
Solutions I Tried:
REMOVE
rpm -e openmotif21-2.1.30-11.EL5
INSTALL
rpm -i openmotif21-2.1.30-11.EL5.i386.rpm
[root@USSLTC3118V lib]# make -f ins_forms.mk install
ins_forms.mk:42: /forms/lib/env_forms.mk: No such file or directory
ins_forms.mk:581: warning: overriding commands for target `-pure'
ins_forms.mk:574: warning: ignoring old commands for target `-pure'
ins_forms.mk:583: warning: overriding commands for target `-quantify'
ins_forms.mk:576: warning: ignoring old commands for target `-quantify'
ins_forms.mk:585: warning: overriding commands for target `-cov'
ins_forms.mk:578: warning: ignoring old commands for target `-cov'
ins_forms.mk:588: warning: overriding commands for target `-pure'
ins_forms.mk:581: warning: ignoring old commands for target `-pure'
ins_forms.mk:590: warning: overriding commands for target `-quantify'
ins_forms.mk:583: warning: ignoring old commands for target `-quantify'
ins_forms.mk:592: warning: overriding commands for target `-cov'
ins_forms.mk:585: warning: ignoring old commands for target `-cov'
ins_forms.mk:595: warning: overriding commands for target `-pure'
ins_forms.mk:588: warning: ignoring old commands for target `-pure'
ins_forms.mk:597: warning: overriding commands for target `-quantify'
ins_forms.mk:590: warning: ignoring old commands for target `-quantify'
ins_forms.mk:599: warning: overriding commands for target `-cov'
ins_forms.mk:592: warning: ignoring old commands for target `-cov'
make: *** No rule to make target `/forms/lib/env_forms.mk'. Stop.
[root@USSLTC3118V lib]#
Any insight as to what else shall I try?

How do you get this error?
Was this working before? If yes, any changes been done recently?
Have you tried to run AutoConfig and see if it completes successfully?
Please see these docs.
R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Executing EXECUTE_QUERY in Forms [ID 1111113.1]
R12: "FRM-92101: There was failure in the Forms Server during startup" Error While Submitting Concurrent Requests [ID 867501.1]
Users Receive FRM-92101 oracle.forms.net.ConnectionException Errors When Launching E-Business Suite Forms Responsibility and Function [ID 1258305.1]
Forms are Erroring with FRM-92101:There was a failure in the forms server during start up. [ID 1433329.1]
Thanks,
Hussein

CS6 CONSTANTLY Crashing During Startup

I'm running the most current version of Premiere Pro CS6 on a iMac 3.4 GHz Intel Core i7, 32 GB 1600 MHz DDR3, NVIDIA GeForce GTX 680MX 2048 MB and running OS X 10.9.4. The last few days I've been experiencing at least 5 crashes during startup -"Sorry :-( a serious error has occurred and Premiere needs to be shutdown yadda yadda..." As I have a massive project with a deadline around the corner I thought, screw it, as long as I can eventually get in, I'll just deal with the problem when I have time... fine. Well, now I can't even get the software launched. I've had to hit OK on that harbinger of death warning box and then Force Quit as it will just give me the pin wheel for days otherwise. It's always when it's loading media that it crashes but never on a specific file, or even drive. There are a few dynamic links but nothing that hasn't been there for weeks, if not months. I've read through as many other forums as I can take and it seems most of them are still unanswered or at least extremely vague to a tech dunce such as myself. I've always sent the crash reports and would be happy to forward another along if provided a specific address...

At one time there was a notice (now removed) that discussed no updates for newer operating systems... and that was about 2 years ago
CS6 and Mac 10.9.4 (or even 10.9.3) is a problem... some links that MAY (or may not) help
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Is there a way to find all the locked files my computer?

I am having trouble importing some files into Aperture and I discovered that one of the reasons might be that some of the files are locked. I know how to unlock them but I'd like to find the locked files and unlock them all at once. Is there a way to do that?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

MacBook shuts down without warning during calibration (39% battery power)

My MacBook has been shutting down without warning during recent calibrations (which I've done approximately every two months). Most recently it shut down after 2 hours and 20 minutes on battery power with a battery reading of 39% -- i.e., nowhere close to the 0% of a fully rundown battery.
The result is that:
I'm not seeing the 'low battery' warning dialog before the computer shuts down; and
(ii) I'm not able to save current work and close all applications when the battery's charge gets low, before the computer goes to sleep (because it just shuts down without warning)
Can I do anything about this? Is it just an unavoidable indication of declining battery performance?
My MacBook is 15 months old. Current 'battery information' is listed below.
Thanks. Replies appreciated.
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4792
Remaining Capacity (mAh): 4790
Amperage (mA): 0
Voltage (mV): 12477
Cycle Count: 23
------------------------------

stevenray1 wrote:
1. I'm not sure how to match the path you listed re: the '1.3 battery update' to what's on my MacBook. Maybe I just don't understand how to interpret it, but I don't have a root folder (or any other folder) identified as 'MacBook.' When I used Spotlight, I also didn't come up with a BatteryUpdater.bundle. A file named BatteryUpdate2007001.pkg was all that Spotlight turned up.
On my MacBoook my hard drive that I boot from is named Mort's MacBook. Yours may be similar I don't know. It is the drive you boot from. Mines shows in finder as the top level drive. The next level in column view. Then you find the System file and go from there.
If your not sure what you named your drive or which one it is click the apple in the upper left corner and then pick *About This Mac* You then should see *Startup Disk* and next to that the name is what you refer too when you look for the folder path I gave.
2. You recommended resetting the SMC. However, the info file you provided a link for says it shouldn't be "necessary except as a last resort in cases where a hardware failure of the power management system is suspected." Does that accurately describe the condition I reported? Also, the problems listed as possible reasons to reset the SMC don't include the one I posted about.
The reason I suggest resetting the SMC is that your changing one of the components that is controlled by the functions of the SMC. The battery is a big part of the system which the battery update changes. To get it to be sure to recognize the new bundle you reset the SMC. The instructions linked are not all inclusive but if you don't want to reset it that is up to you.
3. Similarly, re: the 1.2 Battery Update, it's not clear to me that any of the listed 'symptoms' of a faulty battery apply in my case -- unless what I reported indicates a "+low charge capacity/runtime+." Does it?
The battery update instructions are again not all inclusive. If you don't want to do it that is fine. All I know is you have a MacBook Pro update installed at the moment. You don't have a MacBook Pro. This suggestion of mine has helped many people with problems as reported by you. You do not have to do anything you don't want. That is your choice. Is your battery cutting off at 39% considered normal operating or capacity to you? I personally would call it a faulty battery, but thats just me.
What would be your definition of a faulty battery?
4. Apparently, you had a faulty battery which Apple replaced. I wasn't sure from your message whether you had other things going on that made it clear you had a faulty battery, or only the same symptoms I reported. Were there other power-related problems in your case, or only, as you wrote "the same thing as yours except mine cut off at 28%"?
I guess I misunderstood your original post, everything yours was doing mine was doing except mine cut off at 28% not 39%. I can only give advice on what you post. Are there other things happening that you didn't mention?
My idea of a faulty battery must be different than yours. If I don't get warnings I should and the battery does not work like it used to then that is a faulty battery in my opinion.
If your not comfortable with any of my suggestions contact Apple support and maybe they can help you. Possibly one of the other posters on here can give you different advice that you agree with. Never do anything advised in the forums unless you agree with it.

LR4 ignores .lock file

Hi,
I am using Lightroom on my desktop MacPro at home and on my MacBook while on the go (or on the coach). In order to not lose edits every time I switch from computer, I've setup my lightroom catalog files on DropBox. This works flawlessly and I'm happy with that except for one little problem:
When I stop working with LR4 I need to quit the application in order to get the new version of the catalog uploaded to dropbox. Thats fine, however sometimes I forget this and just close my macbook without quitting LR. Now when I start working the next time on the other computer there is the risk that I start the same catalog that is already open. LR has however created the .lock file which should prevent me from doing that. However, to my unpleasant surprise, it seems that it ignores this .lock file. It just opens the .lrcat file and I can work with it and save it. When I save the open file from the other computer later, dropbox creates a "conflicting copy".
All that is no disaster but I would like to be able to rely on the protection mechanism provided by the .lock file, as it is supposedly intended to work. So my question is:
how is it possible that LR4 ignores the .lock file and how can I make LR4 refuse to open a .lrcat file when a .lock file is present? or at least give a warning ?
Thanks for any ideas, Jules

I would guess that LR’s .lock file is there to prevent two things: more than one person opening the catalog at the same time or to warn of catalog corruption in case of a sudden power loss or the computer being put to sleep with the catalog on the local drive, and upon starting LR, it tries to lock the .lock file and if that succeeds then no one else has the catalog file open, and then it checks some other place in the database to see if all write operations were completed successfully, and if so then it opens the catalog and silently deletes the .lock file. Perhaps in the past there was a warning whenever the .lock file existed but that was generating unnecessary support calls so they made the checking more sophisticated and don’t warn unless there is a real problem. Of course cloud-syncing the catalog was not anticipated in the current design of the .lock file handing and so it is a problem for you.
If you were on Windows I’d suggest that you redirect your LR startup shortcut to point to a .cmd or .bat file that has an IF NOT EXISTS whatevercatalog.lock START LR-shortcut so LR doesn’t get started if the .lock file exists, and I’d guess there are similar scripting mechanisms available on the Mac although I don’t know exactly what they are.

Weird Locked Files/Permissions/Dock/Etc

I have some sort of odd locked file/permissions problem (I think).
About a year ago, I seem to have done something to my permissions or locked files that I can't seem to fix. I have a variety of disparate symptoms, including applications that won't work or can't be installed/deleted because support or preference files are locked or can't be changed, a need to repeatedly reauthenticate with a password just to move files from one folder to the next, an inability to turn off file sync for mobile me, dock item changes that go away whenever I reboot, locked files that continually reopen in Preview, having to manually delete and reinstall apps like Preview apparently because of locked preference files, printers that won't work because of locked files until I delete all and reinstall, software that won't run properly or fails to launch at all on double click, etc.
It is almost like a ghost in the machine problem because the problems are relatively varied.
I've tried disk utility etc to repair permissions and none of the repairs work (I keep getting the same errors, copied below). I've tried a complete reinstall of the OS, repair permissions from the OS X restore disk, etc. and nothing seems to help.
This is happening on a Mac Pro 1,1 (3.0 GHz), running 10.7.4 with all updates through today and with a Radeon 4870 card, and 9 GB of properly matched ram. Everything else works pretty well and I have no similar problems on my wife's 2011 iMac, my MacBookAir i5, etc.
I'm thinking that there is some sort of locked file or permissions problem that is not getting fixed correctly and that there might be some trick to fixing it.
Help!!
Repairing permissions for “Master”
ACL found but not expected on “Library/Printers”
Repaired “Library/Printers”
ACL found but not expected on “private/etc/apache2/users”
Repaired “private/etc/apache2/users”
ACL found but not expected on “Library/Printers/PPDs”
Repaired “Library/Printers/PPDs”
ACL found but not expected on “Library/Printers/PPDs/Contents”
Repaired “Library/Printers/PPDs/Contents”
ACL found but not expected on “Library/Printers/PPDs/Contents/Resources”
Repaired “Library/Printers/PPDs/Contents/Resources”
ACL differs on “Users”
Repaired “Users”
ACL found but not expected on “private/var/root”
Repaired “private/var/root”
ACL found but not expected on “private/var/root/Library”
Repaired “private/var/root/Library”
ACL found but not expected on “private/var/root/Library/Preferences”
Repaired “private/var/root/Library/Preferences”
Permissions repair complete

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the Recovery screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Imac freezes during startup stops @ blue screen & have tried everything

My imac freezes during startup, it gets to blue screen and just sits. I have tried to boot from the Leopard 10.5 install disk, and just sits, can't get to log in screen. Have run the disk utility and it says disk appears to be ok, Won't startup up in safe boot, blue screen just sit. Have tried 'fsck' fix, just sits at blue screen. Have reset PRAM, I don't know want else to try. Disk utility & "fsck" says 'disk appears to be ok'. When exiting fsck, it will start the process then stops. Does anyone have any suggestions, I have not tried to reinstall 10.5 yet.
Thanks in advance
Paula

After reading resolutions TS1541 & other threads, I decided to try to archive & reinstall 10.5 from install disc. Well that made things worse, sometime during reinstall, system locked up, I looked at the log during install & it had been locked up about 3 hours and now I have nothing. no systems files, using Target( firewire cable) disc with my macbook, I can see I have previous system folder & a folder that say system. but Install disc does not see OS.
Do I need to take it to an apple store for repair or what. It's only 3 years old.
please help
Paula

Can't update Norton after upgrading to Lion...holding 3 and 2 during startup didn't correct issue (Lion is 64 bit)

how do i get my older mac to allow norton to update virus definitions...error says i need to startup with 32 bit kernel but i tried it and still can't do it (i held 3 and 2 down during startup per Apple.com instructions)

I meant to include this info from the System Profile:
Maybe easier to read:
Canon MF4400 Series:
Status:          Idle
Print Server:          Local
Driver Version:          1.1.0
Default:          Yes
Shared:          Yes
URI:          usb://Canon/MF4400%20Series?serial=0122F5200302
PPD:          Canon MF4400 Series
PPD File Version:          1.1.0
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.6svn (cups-327)
Scanning support:          Yes
Scanning app (bundleID path):          -
Scanning app version:          -
Scanner UUID:          00000000-3031-3232-4635-323030333032
Printer Commands:          none
CUPS filters:
capdftopdl:
Path:          /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl
Permissions:          rwxr-xr-x
Fax support:          No
PDEs:
BasicSettingsPDE.plugin:
Sandbox compliant:          Yes

Error during startup of portal service after SPS11

Hi Guys,
After installation of SPS11 to our 2004s portal system we have problem with startup of our Portal service.
Before SPS11 we had SPS9 system and everything was working correctly.
Our service is connecting to Database during its initialization.
This is part of our code:
Properties p = new Properties();
p.put("java.naming.factory.initial", "com.sap.engine.services.jndi.InitialContextFactoryImpl");
try
     Context ctx = new InitialContext(p);
     _ds = (DataSource)ctx.lookup(POOLNAME);
     Connection conn = _ds.getConnection();
     conn.close();
     LogWriter.traceInfo(LogWrapper.trace,"Connection established.");
} catch (NamingException ex)
The error is:
#1.5#000802A2BF4A00580000038200003E3000042C1F016BDC9A#1174411586934#System.err#sap.com/irj#System.err#Guest#2####a813ff20d70611dbbcd7000802a2bf4a#SAPEngine_Application_Thread[impl:3]_27##0#0#Error##Plain###com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SABMILLER.
     at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
     at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:344)
     at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:254)
     at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:271)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at cz.sap.statemanagement.StateLogRetriever.<init>(StateLogRetriever.java:73)
The probleam appears only during startup of portal!
If you deploy service on running portal it is started without any problems.
We tried to apply note (Note 960199 - 2-Phase Init Mechanism for Portal Services is Deprecated) but without success.
This is modification of our portalapps.xml as described in Note.
    <service name="StatemanagementLogService">
      <service-config>
        <property name="className" value="cz.sap.statemanagement.StatemanagementLogService"/>
        <property name="startup" value="true"/>
        <property name="twophaseinit" value="always"/>
      </service-config>
Please could you help us with this problem?
Anyone has an idea what is wrong?
Thanks a lot
Ondrej

Hi Nirmal,
thanks you for your quick response. This is what the installer returns when I use your suggested command:
Mar 7, 2012 2:35:56 PM [Error]: The parameter jce_policy_zip in externally supplied configuration is invalid.
I looked up the parameters for the STARTUP:
rootdir [guiport] [httpport] [guistart] [guimode] [config] [sid] [instanceNr]
Thus the jce_policy_zip is not a valid parameter.
However, after deleting the file specified I could just run STARTUP again and this worked.
Thanks
Marcel
Edited by: M. Rabe on Mar 7, 2012 2:57 PM

Screen Goes Black During Startup (after login)

Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
Richard

Howdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin

FRM-92101 There was a failure in the forms server during startup

Hi guys when running EBS i am getting this error:
it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
error : FRM-92101 There was a failure in the forms server during startup
this could happen due to invalid configuration
please look into webserver log file for detail
following are the formsweb.cfg file details:
-------------------------------------------------------------------------------start----------------------------------------
[oratest@kapp server]$ vi formsweb.cfg
[oratest@kapp server]$ tail -1000 formsweb.cfg
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=orac
------------------------------------------------------end----------------------------------------------
plz help
regards,
kashif

Hi Hussein,
i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
and application log is as follows:
10/10/22 18:41:45.258 10.1.3.0.0 Started
10/10/22 18:41:46.981 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
10/10/22 18:44:38.873 formsweb: ListenerServlet init()
10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 14:57:11.795 10.1.3.0.0 Started
10/10/23 14:57:22.415 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:05:56.542 10.1.3.0.0 Started
10/10/23 15:05:58.541 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
10/10/23 15:15:29.23 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:33:44.992 10.1.3.0.0 Started
10/10/23 15:33:46.570 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
regards,
kashif

Exclusivel​y locked files warning during startup on my A100 Satellite

Similar Messages

Maybe you are looking for

Exclusively locked files warning during startup on my A100 Satellite