Executable run-time error: "Failed to process adress of Labview Program. Occurences will not work."
When I run my VI it works fine. However, when I create it into an executable and try to run the exe, it gives me an error, "Failed to process adress of Labview Program. Occurences will not work." Why?
I am using Labview 7.0. I have attached a screen shot and the code. thanks for checking it out and let me know if you need any more info.
Attachments:
Labview_Error.bmp 2305 KB
Main.vi 230 KB
PAIN_Generator.exe 2186 KB
Similar Messages
-
I tried to update iTunes with the latest release and it screwed everything up on my desktop (Windows 7) and on my laptop (Windows Vista) giving error messages related to runtime error, etc. Tried to recover previous version and it would not recover fully. Now have no itunes on either computer and it will not install properly or open after quasi installed. Help please
Howdy LarrySfromTX,
The following article provides steps that can help get iTunes back up and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
package Exp4;
import java.awt.Color;
import java.awt.GridLayout;
import java.awt.event.ItemEvent;
import java.awt.event.ItemListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
* @author Gursimran
public class combox extends JFrame implements ItemListener{
public combox()
JComboBox cb;
setLayout(new GridLayout(10,10));
cb= new JComboBox<>();
cb.addItem("Red");
cb.addItem("Green");
cb.addItem("Blue");
add(cb);
cb.addItemListener(this);
setVisible(true);
setSize(400,400);
public static void main(String[] args)
combox obj=new combox();
@Override
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable().equals(0))
this.getContentPane().setBackground(Color.red);
else if(e.getItemSelectable().equals(1))
this.getContentPane().setBackground(Color.green);Please post the exact error message you get.
-
Not only will holding Option while booting not work, but all of the other boot tricks (safe mode, single user mode, etc), will not work. I am at a loss. I also don't have an optical drive in this particular MBP. I have an SSD where it once was.
I know you have tried other booting types, but have you tried booting into recovery mode? Cmd+R or internet recovery? By any chance have you recently deleted/resized/changed format to a partition? Even if it was not the main one? Have you installed third party applications that could have messed up your system files? Or some sort of RAID software, Fusion Drive etc.? All of this info will help us to pinpoint your issue quicker and help you. Any change you noticed before this happened (even if it seems small), that you consider worth telling us would be greatly appreciated.
Also, do you have access to another Mac besides this one(preferably)? Or do you have access to a Windows computer (7 or 8 preferably)?
Do you hear the chime before the message appears? -
MS VB Run-Time Error '13': Type Mismatch
Hi,
I'm new to the forum, and just starting a trial of RH7 as my
company decides whether we'll upgrade from our X4 product or switch
to a different HAT. Before attempting to import my existing HPJ
project, I opened the sample Application Help project. Frequently
when I switch among topics, I get a Microsoft Visual Basic dialog
box that says Run-Time Error '13': Type Mismatch. I have to click
the End button to close the dialog box. Does anyone have any idea
what causes the error? I got that error also in X4 when switching
among topics in my own project (on a different computer).Hello Brian,
I'm thrilled!!! Your clue was enough to set me in the right
direction, so after spending many hours searching for the solution
to this problem lately and in the past, it appears to finally be
solved. Initially just unchecking the other add-ins didn't do the
trick, and the situation seemed to get worse and worse--I couldn't
save files because Word kept giving me error messages that macros
were disabled (which I didn't know how to rectify), and RH kept
freezing. I noticed after a while that the RoboHelp menu in Word
would have disappeared when RH froze, and that the template would
have changed to Normal.dot. If I reattached the RoboHelp.dot
template, RH would unfreeze, but later the template would switch
back to Normal and RH would freeze again. I was initimidated to
edit the registry. Finally I came upon this page
http://personal-computer-tutor.com/NNTWord.htm
where the author Linda gave the path to the Word startup folder
where I found some templates whose filenames were preceded by
tildes (corrupt?). I deleted those and other junk and I temporarily
deleted the normal.dot template at Linda's suggestion. Since then,
the run-time errors have no longer occurred and the other problems
have not recurred. I THINK I'm back on track! I'm thrilled because
my boss encouraged me to uninstall and re-install Office and
migrate to different HAT, a time-consuming process I'd rather avoid
at least until the current release is completed. Thank you so much
for your help!! -
Run time error when Combining PDF or WORD files
Good morning everyone
I have a client who is trying to merge two files either word or PDF files and every time she does this she is getting a run time error on the process.
the Machine is a Lenevo Desktop with Xp SP3 on the machine
Running Office 2007 with SP 3 now on the machine
Adobe Pro X with the latest and current updates Licnesed
I have done the repair on this unit several times as well as repair of the Office.
We can convert the Word files no problem but i get a an error on the merging of the files
has anyone seen this problem before?
what do i need to do to resolve this issue?Operating system is Windows Vista Home Premium..
Version of Adobe Reader is 10.1.13.
Any thoughts on what the issue is? -
Run time error in MIGO after maintaining tax code
Hello Experts,
I had configured the new tax code ,which is working fine for the PO document ZLOC domestic and the account category Z.
While doing the MIGO for purchase document type ZGEN general purchase , I am getting run time error:
"Division by 0 (type P) in program "SAPLJ1IEX".
When I debugged the code i found that inside FM: 'J_1IEX_DEFAULT_EXCISE_DUTY'
one another FM is being called: 'J_1I6_UNIT_CONVERSION' which is returning the value "ls_ekpo-menge" as 0(Zero).
later in the code when "ls_ekpo-menge" used in calculation then divide by 0 runtime error is coming.
Please suggest what need to be done.
Is there anything related to tax code? How should I correct it?Hi,
There is not value in that field for PO quantity / Value it is missing while doing MIGO. Check whether you have maintained values for all required fields.
Kiran -
Run time error when set filter on the request id in the output query.
Hi all,
I am getting a run time error when I select the request id and set filter on that and when i am selecting all the request id it contains around 2lacs values in that If i cliked ok on that .
It popped up a msg like this
" Run time error 61706
Insufficient memory to perform operation "User was educated not to select the entire data in the filter
-
Run-time error 339 mozctl.dll
I cannot run some business software because I keep getting Run-time error 339 component 'mozctl.dll" or one of its dependencies not correctly registered: a file is missing or invalid. I have used 3 different registry cleanup programs that are supposed to fix it and none do. I have uninstalled Firefox and reinstalled Firefox and nothing seems to help
== This happened ==
Every time Firefox opened
== Every time I try to run my tax software that tries to check for updates. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; YPC 3.0.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; yie8)Colin,
Have you tried the shipping examples? Do these work for you, or do they give the same error? Also, it may help to manually add a refence to the driver under Project -> References -> Browse -> nidaq32.dll.
Hope this helps,
Ryan V.
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments -
Package failed with run time error: " GETWA_NOT_ASSIGNED".
Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32774).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Regards, TrineHi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António -
Getting run time errors while executing the copied SAP programs
Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regardsHi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri -
MSS PORTAL - RUN TIME ERROR WHEN EXECUTING A WORK ITEM IN UWL
Hi all,
I've a requirement wherein I need to have a custom screen in place of 'standard user decision' task in the UWL of MSS portal. I've developed a custom screen with Approve and Reject buttons and it works fine if I execute the work item from SAP inbox whereas in portal (UWL), it gives a run time error stating,
Portal Runtime Error
An exception occurred while processing your request
Exception id: 10:56_12/05/08_0020_509163550.
I'm sure that this error is due to missing configuration between the dynpro and the Portal. All inputs in this regard will be of great help and will be valuable to me.
Thanks in advance,
Bharathi.Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan -
Run-time error '1004' -- Method 'Container' of object '_Workbook' failed
Dear All,
One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
Run-time error '1004'
Method 'Container' of object '_Workbook' failed.
I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
Could anyone please tell me how this error can be eliminated for the user?
Regards,
Lakshmi.Dear Arpan,
We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
Regards,
Lakshmi Venigala. -
Run-time error while executing alv grid report
Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER_1
EXPORTING CONTAINER_NAME = CONTAINER_1.
CREATE OBJECT GRID1
EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'VBAK
CHANGING IT_OUTTAB = IT_VBAK.
Reward points if useful. -
Run time error while executing KP06
Hello All,
A run time error is being returned when I execute the tcode KP06. After entering all required field such as cost elements, cost center / CCgroup, then I pressed period screen / overview screen ... and it went to abap dump ...
FYI, I have upgraded to 4.7 to ECC system.
Regards,
Bharath.
Moderator message: please do more research before asking, use ST22, search for SAP notes, check your custom enhancements.
Edited by: Thomas Zloch on Aug 22, 2011 9:58 AMOk. Look at the dump in ST22 and solve your problem.
Maybe you are looking for
-
HOW TO... Fix Your **** iPod's Connectivity to PC
Okay, Windows XP user? Do you have the following symptoms: 1) The iTunes and iPod Updater do not recognise the iPod. You've tried the 4 R's, but NONE OF them work? 2) The 5th R "Restore" will not work because iPod Updater hangs on Initialize and does
-
Is this where i report a bug in the finder?
hi. I use aftereffects to render quicktime movies. I render them, open them From the finder in Quicktime, make notes of changes i want to make, go back and edit them in Aftereffects, and try to render them again. this is where the bug is. after effec
-
Weblogic 10.3 and commons-lang-2.4.jar
Dear All, I made a web application. It uses some 3party libraries, they are in web-inf/lib directory: WEB-INF |-sun-web.xml |-web.xml |-weblogic.xml WEB-INF/lib |-commons-io-1.4.jar |-commons-lang-2.4.jar |-xbean.jar My web application is running on
-
Linkage of different ChaRM tickets as parent child
Hi All, We are planning to use Solution Manager ChaRm with the to log change requests. In some cases we have global change requests which when required to be implemented - we need to create regional / country specific change requests. Now the condi
-
How to avoid multiple firefox browser-one inside one
When browser open, we just need one open, rest all to open if and when as per our command. Here that's not happening. Firefox opens inside firefox (Stupid unwanted ads). If this is not solved, am afraid people will stop using Firefox. Kindly advise h