Execute Action in One Click

I am using Adobe Acrobat XI Pro for Windows. I have created an action. When I want to execute the action, I must click on the action, then click start to execute the action. Is there a way to bypass having to click start and simply execute the action when I click on it. I want to run the action on a single file at a time, so I don't need to select multiple files before doing so. Any advice would be appreciated. Thank you.

No, you can't do that. But if you're running it on a single file at a time
then you could possibly use a script to do it with a single click,
depending on what the Action does.

Similar Messages

  • Stringing multiple actions onto one click?

    Is it possible to have multiple actions happen, either simultaneously, or one right after another, with only one click causing this?

    Yes it is. In the Build Inspector, click the button labeled "More Options", which will reveal the Build Order drawer. Here you can set which builds/actions occur in which order, which builds/actions occur simultaneously, and whether they are triggered by a click.

  • CP5: Enable Multilple Actions on one Click

    I have a clickbox and I would like to initate an Advanced Action when it is clicked. The problem I am running into is I also want the click to initiate a "jump to slide"  and the only way I see I can do this is to limit the amount of attempts the user can click the "clickbox" - which I was not planning on doing. The only work around I see is to increase the attempts.
    Let me know if you think there is another way to do this.
    I am also trying to figure out how this click could increment a variable/counter - any ideas? It seems so simple but I am having a hard time.
    Thanks!

    Here's a simple way to do this.
    In CP 5:
    On the slide where you want to perform the check to see if the variable is at three or higher:
    Add a click box. Give it an Item Name like "MyClickBox". In the properties panel > Action Tab > On Success, choose Jump to Slide and pick the slide you want to jump to.
    Make the click box invisible but unchecking the checkbox labeled Visible. It's right below the Item name.
    Click the slide. In the properties panel > Action tab On Enter field, choose Execute Advanced Actions. Click the folder icon that appears.
    The Advanced Actions dialog box shows up. Choose Action Type: Conditional actions. Give it an Action Name like "evaluateMyCounter".
    Before we move farther, Click on the Variables button at the bottom of the dialog box, near Save and Close. Add a New User Variable with a unique name like "myCounter". Give it a default value of 0. Add a description to help you remember what this variable is used for. Click Save, then close the dialog box.
    Now in the IF pane, Choose Perform an action if "All conditions are true":
    Click the Add button (button with a plus sign and three rectangles). Select the 1st variable drop-down menu and choose "variable". This drop-down menu turns into a new drop-down menu. Click it again and select the MyCounter variable from the list (it's probably near the top).
    Now click the second drop-down menu "Select comparison operator..." and choose "greater or equal to".
    Now click the third drop-down menu "variable" and choose "literal'. Type in the number "3".
    We basically just said "if MyVariable is greater or equal to 3, do the following actions". In this case we want to make that click-box visible so users can click it. So in the Actions pane, tell it what you want to do.
    Click the New button. Click the drop-down menu "Select Action..." and choose Show. From the second drop-down menu choose the click-box you placed on the slide, "MyClickBox".
    Great! That's all you need to do in at the moment. You could add actions to perform when the MyCounter is less than 3 but you can handle that later.
    Save this Action and Close the Dialog Box.
    Now you need something to increment the MyCounter Variable. How you do this can vary but you could add a click-box or button somewhere on your slide.
    Add another clickbox and OnSuccess: Execute Advanced Actions. We don't want it to evaluateMyCounter so click the folder button to open up the Advanced Actions dialog box. Create a Standard Action with the name incrementMyCounter. Add an action to the Actions pane. A drop-down menu will appear, "select Action...". Choose Expression. Then more drop-down menus will appear. From the "Select Variable...", choose MyCounter. Then after the "=" click the "variable" menu. Choose variable, then choose MyCounter again. Select "+" from the next menu. Select "literal" from the next menu. Then that menu will change allowing you to write the number 1.
    Now this action will make the MyCounter variable equal to what ever it is currently equal to plus 1. If you want to have it do something else when the user clicks this click-box you can add those actions write below it. Save this action and close the menu.
    Hope this helped.

  • How to create play all actions in one Click

    Please help

    The first action in that action set play the rest of actions in that action set it does not play all actions. That would require a Photoshop script to retrieve all the loaded action sets and do the action in each. Why would you want to run random actions.
    That first action in the set was the last action recorded in the action set. Started with a make snapshot named normal then select that snapshot then play the next action in the set, The select snapshot normal and play next action is repeated till the rest of the action in the set have been played. Then a stop message is displayed.  The other actions in the set make a group add their effect and make a snapshot.  If you uncheck the stop step you could even batch this action, The stop would stop the batch process.
    Just expand the actions and action steps and read the steps. Actions are easy to record and edit. The action palette is a full function action editor. You can single step and edit at the same time.  Reading action is a good way to learn how to use Photoshop and you will know if an action is going to destroy work you have dons on a document like flatten you work.
    Crafting Actions Package
    Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    12 Scripts for actions
    Example
    Download

  • Hi i want to execute 3 reports  at one click without user interaction

    hi Friends,
    Hi i want to execute 3 reports with one click ie  by putting radio button when we click on this this wants to execute all 3 reports with out user interaction pls try to understand and provide the solution pls
    Thanks & Regards
    Mohan  Reddy

    Hello,
    To achieve this you can use the SUBMIT command after an user action.
    Example
    The program report1 has a stand-alone selection screen with the screen number 1100. In the program report2, an internal table with row type RSPARAMS and a ranges table are filled for this selection screen. These are transferred at SUBMIT together with a single condition.
    Program accessed
    REPORT report1.
    DATA text TYPE c LENGTH 10.
    SELECTION-SCREEN BEGIN OF SCREEN 1100.
      SELECT-OPTIONS: selcrit1 FOR text,
                      selcrit2 FOR text.
    SELECTION-SCREEN END OF SCREEN 1100.
    Calling program
    REPORT report2.
    DATA: text       TYPE c LENGTH 10,
          rspar_tab  TYPE TABLE OF rsparams,
          rspar_line LIKE LINE OF rspar_tab,
          range_tab  LIKE RANGE OF text,
          range_line LIKE LINE OF range_tab.
    rspar_line-selname = 'SELCRIT1'.
    rspar_line-kind    = 'S'.
    rspar_line-sign    = 'I'.
    rspar_line-option  = 'EQ'.
    rspar_line-low     = 'ABAP'.
    APPEND rspar_line TO rspar_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'H'.
    APPEND range_line TO range_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'K'.
    APPEND range_line TO range_tab.
    SUBMIT report1 USING SELECTION-SCREEN '1100'
                   WITH SELECTION-TABLE rspar_tab
                   WITH selcrit2 BETWEEN 'H' AND 'K'
                   WITH selcrit2 IN range_tab
                   AND RETURN.
    Regards.

  • Save button is not working for ONE CLICK ACTION

    Hi All,
    We have embeded a custom table view in a standard component.While we are editing the first row of the table view by ONE CLICK ACTION & pressing the SAVE button of overview page,then the record is saved in the database. But if we edit any row other than the 1st one,the save button is not working.
    We have used transaction context here for simple object.
    lv_tx_ctxt = lr_ent_bt->get_transaction( ).
    my_tx_context->add_tx_context( lv_tx_ctxt ).
    Please suggest how we can focus on the current line which we are editing & can save the record in database?
    Thanks.

    Hi Hakan,
    Probabaly this is not my problem. I know that how bt one click we can get the desired row.
    Let me briefly explain you my requirement and currently where I am stuck.
    I have a assignment block ( custom) in the main overview page with a custom table view ( ie in the view we are displayng entries in the table view ) and the user can press edit button on any row and that will open the particular row in edit mode . User will change the value in any of the columns and press save button on the main component and the custom changes will be saved in the database.
    Now the problem that we are facing is when we are chnaging the first row it si working but when we are doing chnages in the 2nd row or 3rd row changes are not saved ( not even in the table view that is getting displayed) .
    *Let me briefly tell you the approach that we took  . Since our table view uses a simple object  ( which is not a related object with BTORDER so we need to explicitly save the simple object entities to transaction context and for doing that we have redefined the eh_onsave method in the overview page) .
    *Now the save button is in overview page so to pass the entry from our custom table view to overview we are using custom controller . The custom controller 's collection wrapper only has the first entry of the table view custom_controller->collection_wrapper->get_next is failing which is the reason why the 2nd entry is not getting saved.
    Can you tell me how i can get all the table entries in my custom controller's collection wrapper?
    Let me know if you have any other questions.

  • Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

  • Can we perform two actions with one button with two clicks one after other?

    Sir,
    can we perform two actions with one button with two clicks one after other?
    I want that when I click an Add Button first time it add data to the database and when I click again this button it clear the form data to empty fields.
    Regards
    Tanvir

    In code it should be easy.
    The following code adds a button called butman with a text "ADD".
    It then registers a listener that will be called if the button is clicked.
    This listener then calls the runAddData method if you clicked on butman while it contained the "ADD" text and it will call the runClearData method otherwise.
    Therefore it will swap the button's functionality between ADD and CLEAR on every click.
    final Button butman = new Button("ADD");
    butman.setOnAction(new EventHandler<ActionEvent>() {
              @Override
              public void handle(ActionEvent t) {
                        if (butman.getText().equals("ADD")) {
                                  butman.setText("CLEAR");
                                  runAddData();
                        } else {
                                  butman.setText("ADD");
                                  runClearData();
                        } // END IF-THEN
              }});I hope this is what you wanted.
    Some extra food for thought.
    You might want to run the ADD and CLEAR methods in their own threads so that it can run in the back ground, without slowing down your user interface.
    I also like to rather reuse one button for multiple functionality in stead of making an application with hundreds of nodes only used rarely with masses of code to show and hide them if needed.

  • IPhoto library Gone! (replaced in just one click w/o ever dragging 2 Trash)

    iPhoto library gone / replaced in just one click (w/ o ever dragging anything to the trash)!
    I currently own multiple PowerMacs all sharing the same high speed local network. All of them run the latest / Mac OS X.4.9 and have multiple HD’s (both internal and external) as well as iLife’ 06. And all of them also have iChatAV3 and are able to video chat one with the other at will while on the same local high speed network.
    This is my very first iPhoto library nightmare since I’ve owned a mac. and yes I’ve always been conditioned to backup everything one wishes to keep. This particular scenario is no different. (altho my back up HD for one of the three G4 computers involved was a bit dated by at least 6 months).
    This was essentially triggered via two separate iLife ‘06 apps , namely iPhoto and iChatAV3 (combined with at least an ounce of stupidity on my part). That combined with 2 people not communicating properly / being on the same page (or rather the same Folder) when working on the very same task. Hey... I do NOT claim to be an expert at this particular application even though I have used macs since apple first introduced the Apple IIe decades ago. So this does not stem from lack of experience but rather not thinking things thru entirely in terms of all the possible consequences of simple, yet catastrophic actions when it comes to replacing or authenticating one particular folder containing the entire iPhoto Library simply titled “pictures”.
    Starts like this, ichatav is open on 2 of three macs and my teenage daughter asks me to send her a roll of pictures she downloaded into my computer (since it’s twice as fast as her own) from her digital still camera. Now she wants all 12 photos on her computer as well. So I drag all 12 photos to my desktop and place them in a folder titled “Jackies pics”. I drag this folder to her icon on my buddy list and ichat AV simply refuses to allow sending the entire folder and ask me to send them one at a time. That should have been my first clue. Strange I thought. Always worked well in the past. Why not now? So I tell her over ichatav that the app simply won’t allow me to send her the entire folder and that I’ll have to send them one at a time. Please make a new folder on your HD called Jackie’s pics. She agrees and creates a folder on her end called .... (you guessed it) ...... “pictures”...... to which she drags each of the 12 images I sent over our local network.
    Little did she realize this newly created folder has the makings of an atomic bomb when it comes to importing the entire folder into iPhoto’s library on her own mac. A dialog box quickly materializes asking that she “authenticate” or hit cancel. So she ask me what to do. I said that’s fine, hit authenticate (assuming she titled it Jackies pics). BIG mistake! She hits authenticate and now she has the 12 images I sent her in iPhoto....BUT .... the 1600 or so originals in the entire iPhoto library quickly vanishes. Her entire iphoto library is now wiped out or rather replaced with this new folder. She asks me, what happened? And in less than 30 seconds she in complete tears. Over 2-3 years of her photos (all 1600 images) gone in the click of a mouse.
    Today is father’s day .... and I remembered that I have a complete backup of her HD (even though it is a bit dated). So together, we managed to recover about 90% of the lost images. If anyone reading this knows how I can possibly recover the final 10% (most current photos) then please help us.
    Bottom line: We were fortunate. This Father’s Day iPhoto Nightmare ended happily....
    TIA
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

    Just another update .... Today, my daughter was multitasking on her G4 powermac working within iPhoto as well as email account and last but not least the latest iTunes. As she opened this final app (and I mean "final").... her entire hard drive bit the dust after she saw the spinning beachball and hence attempted to force quit. (I should also point out we are having a heat wave in San Diego today ...which also may have contributed to this hardware issue mainly).
    This time, I had a complete updated copy of her HD and simply cloned it to a new hard drive. Took me a few hours to troubleshoot, clone and install a new drive in its place. But all is working normally again (sure hope it stays that way this time).
    Friendly reminder to those who read this post .....
    BACKUP, BACKUP, BACKUP .... ESPECIALLY IN IPHOTO & ITUNES!

  • How do I rename many photos all at one time with one click?

    I have got many photos of a sery and want to rename it all with one click only (instead of clicking through it all in single actions and wasting time).
    How can I rename many pictures/photos all together with one click only? -
    1) I have OS X Yosemite
    2) Aperture
    3) Automator App
    to use for this purpose, but I do not see through with any of it.
    Detailed Support for 1) and 2) and 3)  please!
    jona li

    Here is an article on how to batch rename files in Yosemite using just the Finder. This is a new feature in Yosemite. See if this article helps you get your files renamed.

  • Uploading Multiple files in One-Click!!!

    Hi All,
    I have got nearly about 900 PDF files in my file server which need to be uploaded to the KM CONTENT Repository.
    what is the best methodology to upload all these file in to the repository in <u><b>one click.</b></u>
    Is it possible to achieve this??
    Eagerly waiting for replies.
    Regards,
    Kavitha

    Hi Patric,
    It is quite interesting to see that there is a way to upload multiple files in a click.
    I just followed your way. i copied the WebDAV URL and pasted and executed in a new browser. and i get....
    <i>The folder you are looking for has no displayable content.
    You can try one of the following:
    Access the folder using the Navigation user interface.
    Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work.</i> "
    When i choose "Web Folder", i get a pop up and it says "<i>The web folder address Internet Explorer was given was too long. Please use a shorter address</i>."
    When i choose "Navigation User Interface", iam taken to the default KM Folder.
    I nowhere able to see the folder structure like what you have mentioned in your reply.
    Kindly help me out.
    Regards,
    Kavitha

  • Unable to alter the process. Unable to execute action start and stop

    Hi,
    I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
    Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
    While clicking on the Component Manager, its giving error like :
    " Unable to retrieve component data. Components.hda exists, but contains no data. ".
    Please suggest.

    I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

  • Multiple tasks with one click

    My work involves manually changing multiple lines to a different graphic style, and then moving that line to a different layer.  As it is now, I am changing the graphic styles, choosing Select < Same < Fill & Stroke, and then moving the lines to the appropriate layer.  I am wanting to know if there is a way to change the graphic style, and move the line to the different layer with one click.  I'm ignorant when it comes to scripting, but was wondering if there are any scripts that would perform this function.

    You need to fully explain the setup. Otherwise, people making suggestions are just guessing. Here's my suggestion, based on what little information you have provided:
    You don't need a script for this; you can do it with a set of very simple Actions. Example:
    Assume your repetitive task requires three Layers, named Red, Green, and Blue. On each Layer, all objects need to have the same Graphic Style applied.
    1. New document. Create three Layers. Name them Red, Green, and Blue.
    2. Define three Graphic Styles. Name them Red, Green, and Blue.
    3. Draw an object (any object; a square, a line, whatever). Send it to Layer Red. In the Attributes Palette, type "Red" into its Note field. (This effectively "names" the object "Red".
    4. Draw an object, Send it to Layer Green. Type "Green" in its Note.
    5. Draw an object. Send it to Layer Blue. Type "Blue" in its Note.
    6. Draw an object on Layer Red. Select it.
    7. Actions Palette: New Action. Name the Action "Red." Set its color to red. Start recording:
    7.1 Edit>Cut
    7.2 Edit>PasteInFront
    7.3 Apply Graphic Style Red
    7.4 Stop recording.
    8 Actions Palette: Select the Cut step. From the flyout menu select Select Object.... In the resulting dialog, enter "Red". OK the dialog. The Action should now have a new Set Selection step listed after the Cut step.
    9. Actions Palette flyout menu: Button Mode.
    Now you have an Action named Red that appears as a red button in the Actions palette. Select an object. Click the button. The object is moved to Layer Red, and gets Graphic Style Red.
    10. Turn off Button Mode. Duplicate the Action. DoubleClick the duplicate. Change its name to Green and its color to green. Edit its Set Selection step to select the object named Green. Replace its Graphic Style step with a step that applies Graphic Style Green.
    11. Similarly duplicate and edit one of the two Actions to create a Blue Action. Put the Actions palette back in Button Mode.
    Now you can select any number of objects, and then move them to the Red, Green, or Blue Layer and apply the appropriate Graphic Style wiht one click.
    Now come back and reveal the specifics of your actual situation which renders all that work moot.
    JET

  • Run Multiple report with one click

    hi
    I have 60 reports with me and i want to run all 60 reports with one click. Is it possible to fire next report at the end of previous using code?????
    Any help would be appreciated

    Hi Swapnil,
    Yes it can be done in many ways. But you will need to analyze what exactally is required and what kind of reports are to be executed in sequence. WHats the report supposed to do, do they need to send some file or some data to external world, does it need to display any output?
    From within the program you can use the SUBMIT command to call each report program one after the other. Or schedule all the 60 reports in a background job such that each report is executed in each step.
    There are many other ways but i am really not sure why there is such a request? This is something really out of the odd :-).
    Hope this helps
    Cheers
    VJ

  • Update all podcasts with one click

    How do I update all podcasts with the new iTunes?

    That's 3 clicks.  Alternatively you can left click on list then click the refresh button in the bottom right hand corner of the screen, but that is also not one click.  It seems the goal of the geniuses behind iTunes 11's interface was to make every action go from 1 mouse click to 2, thus making the software slower and more cumbersome to use.
    Is it really too much to ask to have a global refresh button in the podcast view in addition to the list view?  Apparently so.  Oh, and why did they disable the sidebar by default?  Without it, you'll never guess what happens.  Oh you did?  Yup it takes 2 clicks to switch from music to podcasts instead of one.

Maybe you are looking for