Execute View Obj query in memory mode
Hi anybody,
I use Jdeveloper 11.1.1.6.0
I have a table upon a filtered View Obj on my page, when I add a new row to View Obj, this row showed in table whereas it must not appear(according to the where clause of View Obj).
As I've understood I should use a View Criteria and set Query Execution Mode to: ' in memory' or 'both' , but I just want to use a View Obj. How can I do that?
Habib
Hi,
If you want to get In-memory filter.
You should do like
RowMatch rm = new RowMatch("X=2"); // some clause just like where-clause
vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
vo.setRowMatch(rm);
vo.executeQuery();
Thanks
Similar Messages
-
SetCurrentRowWithKeyValue - Does this execute View Object Query twice?
Hi,
I have a View Object for which on the prepare model of the page definition I am executing the setCurrentRowWithKeyValue action.
In the log I see two queries being printed one with Bind Variable of the Key value that I have passed and right next to that I see one more query for the same view object that gets executed without any where clause.
This causes the View Object to execute an open query which is causing performance issue.
Any help/Insight on this problem is greatly appreciated.
Thanks,
Kumar K.Thanks for the response.
Solution provided in the thread doesn't prevent the execution but it will not return any rows..But I am just curious to know that is there some thing different done while using setCurrentRowWithKeyValue?
Why should it execute query twice once with Bind variable and next time without the bind variable?
Kumar K. -
Cannot export Financial Report from HTML view to Query Ready Mode
Hi,
I am opening Hyperion Financial Reports in Workspace in HTML mode. On the bottom right of the report, when I click on "Export in Query Ready Mode", the report does not get transported to excel. Rather, a message flashes for a split-second and disappears. The message is "The address is not valid". Can anyone please advise as to what should I do to get the report in excel? I did notice that there is also File->Export->Excel->Fully Formatted Grids & Texts, but we want to get it in Query Ready Mode.
Version is 11.1.1.3. Thanks for any suggestions.
ABGWe have resolved this issue. The problem was that Smart View installation/configuration was not complete on the machine which I used to launch report into Query Ready Mode. Once Smart View was fixed, we were able to convert report from HTML view to Query Ready Mode.
ABG -
SQL Server 2008R2 SP2 Query optimizer memory leak ?
It looks like we are facing a SQL Server 2008R2 queery optimizer memory leak.
We have below version of SQL Server
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
The instance is set MAximum memory tro 20 GB.
After executing a huge query (2277 kB generated by IBM SPSS Clementine) with tons of CASE and a lot of AND/OR statements in the WHERE and CASE statements and muliple subqueries the server stops responding on Out of memory in the internal pool
and the query optimizer has allocated all the memory.
From Management Data Warehouse we can find that the query was executed at
7.11.2014 22:40:57
Then at 1:22:48 we recieve FAIL_PACE_ALLOCATION 1
2014-11-08 01:22:48.70 spid75 Failed allocate pages: FAIL_PAGE_ALLOCATION 1
And then tons of below errors
2014-11-08 01:24:02.22 spid87 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:02.22 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:02.22 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:02.30 Server Error: 17312, Severity: 16, State: 1.
2014-11-08 01:24:02.30 Server SQL Server is terminating a system or background task Fulltext Host Controller Timer Task due to errors in starting up the task (setup state 1).
2014-11-08 01:24:02.22 spid74 Error: 701, Severity: 17, State: 123.
2014-11-08 01:24:02.22 spid74 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:13.22 Server Error: 17312, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:13.22 spid87 Error: 701, Severity: 17, State: 123.
2014-11-08 01:24:13.22 spid87 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:13.22 spid63 Error: 701, Severity: 17, State: 130.
2014-11-08 01:24:13.22 spid63 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:13.22 spid57 Error: 701, Severity: 17, State: 123.
2014-11-08 01:24:13.22 spid57 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:13.22 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:18.26 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:24.43 spid81 Error: 701, Severity: 17, State: 123.
2014-11-08 01:24:24.43 spid81 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:18.25 Server Error: 18052, Severity: -1, State: 0. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:18.25 Server BRKR TASK: Operating system error Exception 0x1 encountered.
2014-11-08 01:24:30.11 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:30.11 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:35.18 spid57 Error: 701, Severity: 17, State: 131.
2014-11-08 01:24:35.18 spid57 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:35.18 spid71 Error: 701, Severity: 17, State: 193.
2014-11-08 01:24:35.18 spid71 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:35.18 Server Error: 17312, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:35.41 Server Error: 17312, Severity: 16, State: 1.
2014-11-08 01:24:35.41 Server SQL Server is terminating a system or background task SSB Task due to errors in starting up the task (setup state 1).
2014-11-08 01:24:35.71 Server Error: 17053, Severity: 16, State: 1.
2014-11-08 01:24:35.71 Server BRKR TASK: Operating system error Exception 0x1 encountered.
2014-11-08 01:24:35.71 spid73 Error: 701, Severity: 17, State: 123.
2014-11-08 01:24:35.71 spid73 There is insufficient system memory in resource pool 'internal' to run this query.
2014-11-08 01:24:46.30 Server Error: 17312, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:51.31 Server Error: 17053, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:51.31 Server Error: 17300, Severity: 16, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
2014-11-08 01:24:51.31 Logon Error: 18052, Severity: -1, State: 0. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
Last error message is half an hour after the inital Out of memory at 2014-11-08 01:52:54.03. Then the Instance is completely shut down
From the memory information in the error log we can see that all the memory is consumed by the QUERY_OPTIMIZER
Buffer Pool Value
Committed 2621440
Target 2621440
Database 130726
Dirty 3682
In IO
0
Latched
1
Free
346
Stolen 2490368
Reserved 0
Visible 2621440
Stolen Potential 0
Limiting Factor 17
Last OOM Factor 0
Last OS Error 0
Page Life Expectancy 28
2014-11-08 01:22:48.90 spid75
Process/System Counts Value
Available Physical Memory 29361627136
Available Virtual Memory 8691842715648
Available Paging File 51593969664
Working Set 628932608
Percent of Committed Memory in WS 100
Page Faults 48955000
System physical memory high 1
System physical memory low 0
Process physical memory low 1
Process virtual memory low 0
MEMORYCLERK_SQLOPTIMIZER (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
SinglePage Allocator 19419712
MultiPage Allocator 128
Memory Manager KB
VM Reserved 100960236
VM Committed 277664
Locked Pages Allocated 21483904
Reserved Memory 1024
Reserved Memory In Use 0
On the other side MDW reports that the MEMORYCLERK_SQLOPTIMIZER increases since the execution of the query up to the point of OUTOF MEMORY, but the Average value is 54.7 MB during that period as can be seen on attached graph.
We have encountered this issue already two times (every time the critical query is executed).Hi,
This does seems to me kind of memory Leak and actually it is from SQL Optimizer which leaked memory from buffer pool so much that it did not had any memory to be allocated for new page.
MEMORYCLERK_SQLOPTIMIZER (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
SinglePage Allocator 19419712
MultiPage Allocator 128
Can you post complete DBCC MEMORYSTATUS output which was generated in errorlog. Is this the only message in errorlog or there are some more messages before and after it.
select (SUM(single_pages_kb)*1024)/8192 as total_stolen_pages, type
from sys.dm_os_memory_clerks
group by typeorder by total_stolen_pages desc
and
select sum(pages_allocated_count * page_size_in_bytes)/1024,type from sys.dm_os_memory_objects
group by type
If you can post the output of above two queries with dbcc memorystaus output on some shared drive and share location with us here. I would try to find out what is leaking memory.
You can very well apply SQL Server 2008 r2 SP3 and see if this issue subsides but I am not sure whether this is fixed or actually it is a bug.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Performance Issue Executing a BEx Query in Crystal Report E 4.0
Dear Forum
I'm working for a customer with big performance issue Executing a BEx Query in Crystal via transient universe.
When query is executed directly against BW via RSRT query returns results in under 2 seconds.
When executed in crystal, without the use of subreports multiple executions (calls to BICS_GET_RESULTS) are seen. Runtimes are as long as 60 seconds.
The Bex query is based on a multiprovider without ODS.
The RFC trace shows BICS connection problems, CS as BICS_PROV_GET_INITIAL_STATE takes a lot of time.
I checked the note 1399816 - Task name - prefix - RSDRP_EXECUTE_AT_QUERY_DISP, and itu2019s not applicable because the customer has the BI 7.01 SP 8 and it has already
domain RSDR0_TASKNAME_LONG in package RSDRC with the
description: 'BW Data Manager: Task name - 32 characters', data
type: CHAR; No. Characters: 32, decimal digits: 0
data element RSDR0_TASKNAME_LONG in package RSDRC with the
description 'BW Data Manager: Task name - 32 characters' and the
previously created domain.
as described on the message
Could you suggest me something to check, please?
Thanks en advance
Regards
RosaHi,
It would be great if you would quote the ADAPT and tell the audience when it is targetted for a fix.
Generally speaking, CR for Enteprise isn't as performant as WebI, because uptake was rather slow .. so i'm of the opinion that there is improvements to be gained. So please work with Support via OSS.
My onlt recommendations can be :
- Patch up to P2.12 in bi 4.0
- Define more default values on the Bex query variables.
- Implement this note in the BW 1593802 Performance optimization when loading query views
Regards,
H -
Error while executing report from Query designer
Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
MohanHi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh -
Hi Gurus,
I have created two queries which is exactly same in term the structure used but query a limited to current year and previous year and query b limited to previous year and previous to previous year. This is due to calculation logic that required for the query.(note that there is no data in the system for previous year)
When i execute both queries; query a return result but query b running forever and returning "Memory low error"
please advice what should i do
Thank youWell, this sounds like a classic performance issue. So you're going to have to either increase your memory allotment (SAP recommends 1GB to normal users, 2GB to 'power users') and/or review how you can adjust the performance of your query and info provider.
There are any number of performance improvement recommendations in the SAP Help documents, SAP classes, and whatnot. Because every problem is unique, I cannot specifically recommend one of them to you. The most common performance enhancement step involves carefully reviewing your query and determining what, if any, key figures or characteristics can be removed. Navigational attributes, for example, are a significant performance drain. The second performance improvement that you can take is to try to use cache functionality.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4
The third performance improvement step that is common is to use aggregates in the info cube.
There are other more expensive solutions- BI Accelerator, HANA, and so forth. But you should not need to implement these.
Good luck ! -
SEM CPM - Link a Query in Web Mode
Hi all,
Im working with SEM-CPM ; i can't add a link to a query in web mode ; i have tried this :
1)Add URL ; works fine but i cannot add the URL dinamycally in order to take the local server ; for example when i transport to QAS then links points to DEV.
2)Add Query : execute the query in Excel.
How can i add a link to a report in order to executed in Web Mode ?
I will rewards asap.
Thanks !!Hi,
You have to assign the URL of the respective Query Link as per the connectivity of
the server..if it is DEV then you can specify only DEV Query link with DEV Web Browser connectivity..and similar to PRO..
I think you cannot cross link the URL - Query Links with DEV to PRO or visa versa..
Hope this helps..
assign points if useful..
Cheers,
Pattan. -
Hide Operators select box in Query Panel Advanced mode
Hl All,
I need to Hide all operators in the select Dropdown in the View Query Panel Advanced mode.
Please help me.
Thanks,
Balaji Mucheli.Hi Balaji,
Use the below code for operator hide
<CompOper Name="Equals" Oper="=" ToDo="-1"></CompOper>
<CompOper Name="Does not Equal" Oper="<>" ToDo="-1"></CompOper>
<CompOper Name="Less than" Oper="<" ToDo="-1"></CompOper>
<CompOper Name="Less than or equal to" Oper="<=" ToDo="-1"></CompOper>
<CompOper Name="Greater than" Oper=">" ToDo="-1"></CompOper>
<CompOper Name="Greater than or equal to" Oper=">=" ToDo="-1"></CompOper>
<CompOper Name="Name" Oper="BETWEEN" ToDo="-1" MinCardinality="0" MaxCardinality="0"/>
<CompOper Name="Name" Oper="NOTBETWEEN" ToDo="-1" MinCardinality="0" MaxCardinality="0"/>
<CompOper Name="Name" Oper="ISBLANK" ToDo="-1" MinCardinality="0" MaxCardinality="0"/>
<CompOper Name="Name" Oper="ISNOTBLANK" ToDo="-1" MinCardinality="0" MaxCardinality="0"/>
Thanks
Prabhat -
Help on Pinning Query into memory
Hi,
I have a very simple query which is as follows:
select col1, col2, col3
from table1
where <cond1> and <cond2>The query is hitting all the indexes and is tuned. The table is not a very big one but has around 700 rows.
Now, the problem.
My job which runs in UNIX for 15 hours uses this query. This query is executed every 10-15 seconds. So you can imagine the no of times its been executed in 15 hours.
Is there any way to put this query in memory at the start so that my performance is enhanced by some way and unnecessary hits are saved?
I know about the DBMS_SHARED_POOL.KEEP option. But is there any other way of doing it?
Thanks in advance.
BharatYou could create your own kind of hash function.
Put the result of the query in a packaged pl/sql variable/array.
When the next call to your function is with the same values, then fetch the result from the array. if not get the result from the table and put it in the array.
The whole packaged including array is kept in memory for your session.
Of cause I'm assuming that the data in the table doesn't change. -
Hi,
can you please tell .
In the tcode:RSRT1 we have View What does it mean?
Can we create views in query designer?
Can we use the dictionary views in query designer?
Can you please tell about?
Regards
NareshHi Naresh.
RSRT1 is used to view the output of queries as well as views.
This is the reason why you see the option to input view.
the difference between RSRT and RSRT1 is as follows
rsrt allows only queries to be executed and provides output in List as well as HTML format
rsrt1 allows you to execute views as well as queries and in HTML format.
hope this helps,
Sri... -
Hi,
My Data flow has 4 dso's and 1 cube. There are some common fields in 4 dso's. It was a 3.5 flow and I have migrated to BI7.0. SOme of the mapping were proposed by itself but some are not.
Now my question is How the data would be viewed at query level.
Would appreciate if anybody can make me understand.
ThanksOn the cube.
I am not able to understand how it will fetch the records. Let us assume Sales Documnet no. is in all four tables and our requirement is that we have to pick delivery information from one table and sales document no. from another table. How the system will link the record.
Thanks -
Error while executing a sql query for select
HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
19 PX COORDINATOR
18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1 -
I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul LKurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase. -
SharePoint 2013 List View with query string filter stops working after editing view from browser
I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
I am new to MACs and have been tasked with providing new users with Macs and MacBooks. I have been told that the CIO does not want the users to be able to transfer data from the machines to any devices via the usb port, but to allow the support staff
-
New batteri for iphone 3?
Hi How much does a batteri cost for an Iphone 3 in DKK? Best Regards, Sezaneh
-
I want to see the transactions details on a particular time stamp
Hi, I want to see all the transactions issued against the database on a particulat time stamp. Scenario: Every day at 2:40 some delete queries are beign issued against the databse. I want to see who the user issuing it and which job is triggering the
-
No option to reorder the Parameters in group Dynamic prompt
I have designed Crystal Report which has an Dynamic prompt like Region / State / City. Selection of Prompts occurs in Order but the title shows as City/Region/State in Preview. I even checked example reports provided for Crystal report and seems like
-
Password reminder: Make safari forget "Never for this site" setting
Hello, Today by mistake I clicked on the button "never remember passwords for this site" by mistake. How can I revert back to the old settings? It's the login page of my company's webmail site and find it extremely annoying to enter a long address no