Execution highlighti​ng not working

I have a sub-VI with the following properties set:
Allow debugging
Reentrant execution
Share clones between instances
When I run the main VI with execution highlighting turned on for both VIs, the sub-VI never shows any action.  What is going on here?

When you have a VI configured to be reentranant you need to open the specific instance of the subVI to use execution highlighting. Turning it on in th ebase suBVI has no effect because it is not referring to the specific instance in your application. Before you run open the subVI from the application itself, not the project. You should see a number appended to its name. Once you have the specific instance you will be able to use execution highlighting. One way to ensure you get the rightinstance is to put a break point in the calling VI right before you would execute the subVI. Then simply step into the subVI and turn on execution highlighting.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

  • Live Preview Highlight is not working.

    I recently downloaded Edge Code to a new work computer and the Live Preview Highlight is not working.
    I have Edge Code installed on a personal computer, and it works great. The version I am using was downloaded about 6 months ago so I am not sure if they changed something with the most recent version. When I highlight a section within the html i.e. a table or row, it would highlight those same sections in the preview. However, this is not the case on my new computer.
    Anybody know whats up? Is it setting on Chrome that I need to change or is there some update that I am not aware of.

    I guess I assumed that you had Chrome setup to auto-update (like I have it). The only way Live Preview will work in a previous version of Edge Code is with an older version of Chrome.
    But there are other reason why Live Preview may not work in latest version of Edge Code. Take a look at Live Preview section of Troubleshooting Guide.
    Randy

  • Color Highlights does not work for chart

    When I set the color coding in the chart, it works fine if I run the crystal report on the same DB that I use to design the report.
    Problem occurs if I run the report on another DB. Color Highlights does not work in that case.
    I am using JRC to run the reports.
    Thanks & Regards,
    Amrita

    Hi Jehanzeb,
    In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
    In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
    While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
    To view the report we have our own server and we are using JRC APIs.
    Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
    This time color Highlight I have specified while creating the report does not work.
    I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
    I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
    For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
    Regards,
    Amrita

  • Row highlight does not work when class has a background-clolor

    This is more a CSS / javascript question but since the problem occurs in Apex I'll try my luck here.
    I try to implement a row highlight feature that worked in 3.2 but not in 4.0. The difference is that the style that is used for the table cells contains a background-color in the 4.0 template and it did not in 3.2.
    This is how it works.
    I created a report template with "before each row" : <tr onMouseOver="cOn(this);" onMouseOut="cOut(this);">
    The javascript does this:
    function cOn(td) {
       if(document.getElementById||(document.all && !(document.getElementById))) {
          if (td.previousSibling != null) {
              td.style.backgroundColor="#FFFF99";
              td.style.color="#000000";         
    }My thought was that td.style.backgroundColor="#FFFF99" would overrule the background color given by the class but when this happens from within javascript this does not work. Is this proper behaviour? Are there other methods that will work?

    Hi Rene
    If you are just looking for a row highlight on a mouse hover, it might be easier to place the following in the html header of the page:
    <style = text/css>
    .apexir_WORKSHEET_DATA tr:hover td {
    background-color: #FFFF99 !important;
    color: #000000 !important;
    </style>
    ~Andrew Schultz

  • Scroll over highlight function not working on custom nav bar links

    Hi - I've created a custom nav bar in iWeb (www.HollywoodRC.com). I have it set up so that the text highlights when scrolled over. This function works in iWeb but does not work on my published site in Safari; however, works in my published site on IE. Any ideas on how to get the scroll over highlight to work on my published safari site? All the links work properly.
    Thanks,
    Steve

    No. Things must have changed. I created a hyperlink with a non web safe font, LedgerD, added a drop shadow and published. I also put the same link in a shape. You can see them in this test page: Page-1 . The two items are image files but they do not contain the link text. Very strange. The hyperlink text can't be selected nor dragged to the desktop like other links, like the Click to Play links on the page, however.
    However, I don't know how IE will handle it. According to this IE emulator site, http://ipinfo.info/netrenderer/, IE can see the drop shadow. But it doesn't tell us how the links will work.

  • Highlight tool not working - all other tools work

    When using any "text" .pdf that is downloaded and fillable my highlight tool does not work. When I highlight text with the cursor then select the highlight tool the comments box indicates that the "highlight tool" has been used, but no color is added to the text. This occurs no matter what color highlighter I use, nor the opacity setting. All other tools (e.g. - underline tool, add text) are working perfectly. Does anyone have a solution to this problem? I am using a Lenovo Windows 8.1 machine and running AcrobatReader 11.0. Thanks in advance for any advice or suggestions. 

    Hi,
    It appears that this was a bug that was introduced in the latest update. Others have been able to resolve this issue by using the Acrobat Cleaner tool to uninstall and then reinstall Acrobat. You might try this if you have a few spare moments.
    And can you please share the problem PDF  which was working correctly in the earlier version.
    Thank you

  • Adobe Reader highlight does not work in IPAD app

    For some reason the highlighter tool in my Adobe Reader IPAD app does not work, any one have advice on this?

    Hi,
    Are the pdf files in which you are trying to highlight are scanned copies?
    Also are the pdf files password protected?
    In password protected files user is not allowed to add any comments.
    Thanks,
    Ankit

  • Commandmenu items highlight is not working in IE8 and firefox

    HI All
    i developed a menu for my project .
    in that menu i have some menuitems
    when i mouseover on commandmenuitem the item is highlighted .
    but this is not working in IE8 and firefox ..
    it is sometimes working in iE7 and some times it is not working.
    Can any one help me

    PDF documents are hosted in an ActiveX or netscape plugin control which have their own printing functions.
    Start>Adobe Reader>Edit>Preferences - to adjust what functionality the PDF document viewer addon displays (menus etc).
    Tools>Manage Addons>Show all addons
    make sure you have both the x86 and x64 versions of your PDF reader Active X control installed and enabled. I would recommend also that you update to the latest version of the vendors' (Adobe?) plugin.
    Possibly you have disabled scripting of ActiveX controls in the IE security zone that your parent page maps to. Also there is an IE security zone feature that prevents navigation to a domain in a zone of lower integrity.
    Tools>Internet Options>Security tab, click "Reset all zones to default".
    when asking developer related questions it is helpful if you can include a link to your website.
    Rob^_^

  • Why is my execution highlight button not available?

    All Debugging buttons are unavailable.  they are unavailable in any Vi, even a new blank one.  I have tried the following ideas without success. 
    Vi Properties, execution, Allow debugging is ticked, Rentrant execution is not ticked, and prioriy is not selected as subroutine.  Any Ideas?

    I can't think of anything that would cause this behavior.  Try exiting LabVIEW, deleting your LabVIEW INI file (back it up first, of course) and restarting LabVIEW. If the debugging options work OK, then there's something weird in your INI file.  At that point, try removing certain lines from it between exiting and restarting LabVIEW to determine what is causing the weird behavior.
    Good luck,
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Highlight text not working in multi-thread client-server application plug-in

    I'm developing a plugin application for my dissertation research on multi-application environment. I have an application server that communicate with the PDF document via plugin.
    The plugin acts as both client and server, depending on the situation.
    - Plugin as Server
             I have a multi-threaded winsock2 IOCP running to catch client connections and when a client connected, get the data from the client (set of words), and highlight these words in the pdf document.
    - Plugin as client
               I use 2 procedures, one to collect all the text from PDF and send to the server using tcp win-socket connection and another to collect data from highlight tool and send these text. both these are not threaded.
    Here's my question, because I want to listen to multiple client connections, when the plugin is the server, I'm running this procedure in a thread and then wait for clients to connect and use IOCP to serve the client connections.  When the client is connected I use the data coming from client to highlight some text in the PDF document. All of these functionalities are already implemented, but when I receive data from client and try to highlight text in the PDF document my application freezes up and stop working. I think this is something to do with the thread. I'm using _beginthreadex to start the server and then another _beginthreadex inside the IOCP worker thread.
    I can post the code, but before that let me know if you can see any problem in this situation. What I see from other posts is that acrobat is not multi-threaded.

    Thanks a lot for the reply.
    I guess I probably need some sort of a notification when the data is received and do a callback to the main thread to run the acrobat API. Is there anyway I can create custom notifications? Something like this,
    AVAppRegisterNotification(AVDocDidOpenNSEL, gExtensionID, ASCallbackCreateNotification( AVDocDidOpen, (void *)DocIsOpenedCallback), NULL);
    or should I use a custom action listener?

  • Problems with swiping, highlighting text, not working properly

    Hello and new to forum as well as new to BB10. I have the Q10 model and really like it alot. However, these swiping techniques or gestures have me puzzled. Sometimes they work, and most times I find myself swiping the hell out of the screeen out of aggravation. Is there any way this can be tested as to working properly since it is a touch activated control?
    I really find myself swiping three times, 5 times or more, just to get to the hub. I cannot close out a screen with one swipe. It will not copy test without repeated taps. The circle pointer is hard to get on. I realize my swiping is a new technique to me, but could it be the protective cover that was put on it? Can anyone help me try to fix this very annoying problem as I am not used to repeated attempts at trying to do something so simple as closing a program or moving to another location tab. I sure would appreciate it.
    Thanks in advance.

    Hello greg30
    Welcome to the BlackBerry Support Community Forums.
    Sorry to hear you are having issues with your BlackBerry Q10 smartphone navigational gestures. Please view the follow link as it takes you to a "BlackBerry Q10 Gestures Overview".
    The screen protector is some cases can effect the gesture input on the BlackBerry Q10 smartphone screen. This is simply due to the increased thickness of the scratch resistant liner on the touch screen.
    Goose947
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Syntax highlighting not working on PL/SQL developer tool

    Hello,
    Syntax highlighting is not working on PL/SQL developer tool using the beautifier. When I go set Syntax highlighting parameters (from  EDIT>PL/SQL Developer Beautifier Options > User Interface> Editor> Syntax Highlighting ) and click apply, the changes are not reflected in SQL code in the SQL window. Other feautures in the beautifier such as Fonts, Window types are working fine.
    Please help me with this issue.
    Thanks!!
    Shreejit

    As this is not an Oracle related question (let alone Oracle SQL or PL/SQL), and as you've been given a link to the relevant website... I'll now lock this thread.

  • Highlighting not working

    Hello, I am using Acrobat Pro V11.0.10 and highlighting is not working. When I select OCRed text the text does not get the overlaying color but it does get a note like icon. I have tried to adjust the highlighting color in the settings but still no success.
    If anyone can provide any guidance that would be much appreciated.

    Hello Jdbaba,
    Based on my research, your post is related to use fortran in Visual Studio:https://software.intel.com/en-us/articles/intel-math-kernel-library-intel-mkl-for-windows-build-intel-mkl-program-with-intel-fortran-in-microsoft-visual-studio This
    technology is provided by Intel. So the question should be consulted on Intel fortran related forum. Not Visual Studio Setup forum, setup forum is about install/uninstall Visual Studio.
    Best regards,  
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Highlight clipping does not work

    I have done exposure bias tests overexposing a sheet of white paper. Even my +5 overexposed files do not show clipping. LAB values read 100% even on +3 exp biased shots.

    Hey. Thank you for the answer but this was not the
    case. The report works fine and i get all the results
    no matter what the cap is. The problem is with
    higlighting words in report (this is this built in
    functionality in APEX when you choose report and then
    specific column to edit then there is a field
    "Highlight words". There I put &P70_F_NAME, which is
    my search field item name.
    The problem is that it does not highlight word if it
    has different caps used in it. But the word is still
    the same - only caps are different. I need a solution
    where the same search string is highlighted no matter
    what the caps are.I understand that your search word highlighting is not working the way you expect it to. I was trying to point out that the way mine are implemented, they highlight the search term regardless of case entered into the search field.
    >
    At the moment it works like that:
    Searh string: milk
    Highlighting: hilights word "milk" in report result
    but does not highlight words "milK", "Milk", "MILK"
    etc
    What I need is that all those words would be
    highlighted as well.I suspect that you might be overriding the highlighting with some other styling, either through your template definition or column specific formatting.
    Can you put an example of this on apex.oracle.com so we can look at it and try to see what's going on? If you do put it on the hosted site make sure to reply back here with the workspace, login and password, application and page number where the problem occurs.
    Earl

  • Cron tab not working --- exp not found message

    Hai All
    My database is Oracle 9i in AIX
    We have a export backup. It works fine by manual execution but it not works in crontab ..An error displayed in mail...Details below
    Script
    ====
    export ORACLE_SID=HIL
    exp system/2007 file=/arch/export/hilexpbacktest.dmp log=/arch/export/hilex
    pback.log full=Y
    Crontab -Sheduling as oracle user
    ==========================
    32 11 * * * /oracle/oracle9i/script/dailybackup
    Error in mail
    =========
    From daemon Tue Apr 10 11:33:00 2007
    Received: (from daemon@localhost)
    by HIL1 (AIX5.3/8.13.4/8.11.0) id l3A6X0Nb729150
    for oracle; Tue, 10 Apr 2007 11:33:00 +0500
    Date: Tue, 10 Apr 2007 11:33:00 +0500
    From: daemon
    Message-Id: <200704100633.l3A6X0Nb729150@HIL1>
    To: oracle
    Subject: Output from cron job /oracle/oracle9i/script/dailybackup, oracle@HIL1,
    exit status 127
    Cron Environment:
    SHELL =
    PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/u
    sr/java14/bin
    CRONDIR=/var/spool/cron/crontabs
    ATDIR=/var/spool/cron/atjobs
    LOGNAME=oracle
    HOME=/oracle/oracle9i
    Your "cron" job executed on HIL1 on Tue Apr 10 11:32:00 IST 2007
    /oracle/oracle9i/script/dailybackup
    produced the following output:
    /oracle/oracle9i/script/dailybackup[2]: exp: not found.
    /oracle/oracle9i/script/dailybackup[5]: exp: not found.
    =========
    Any Enviornment variable missing? Where this variable set?
    please give a solution...
    Please help..
    Shiju...

    I guess the path of exp is unable to find by unix. Also in path variable you did not set the bin folder of oracle.
    Suppose oracle is in file system /app/oracle/ora92
    try to use absolute path like below, or set the PATH variable.
    /app/oracle/ora92/bin/exp system/2007 file=/arch/export/hilexpbacktest.dmp log=/arch/export/hilex
    pback.log full=Y

Maybe you are looking for