Existing instances while publising new version in ALBPM server

We are facing some problem with existing instances, when publshing a newer version of project.
Please explain when we loose the instance?
For example we project of version 1.0.0. we have one instance running on it. we published a newer version 1.0.1.
Now, how does the instance with the old version executes. will that still be availabe ?

Hi,
in this manual (valid for 6.0) explains how you assume the changes between versions
[url http://edocs.bea.com/albsi/docs55/pdfs/ALBPM55_57ProjectVersioningRules.pdf]http://edocs.bea.com/albsi/docs55/pdfs/ALBPM55_57ProjectVersioningRules.pdf
Regards

Similar Messages

HT4906 If I update iPhoto, will it transfer all my existing photos to the new version? Please advise, thank you,

If I update iPhoto, will it transfer all my existing photos to the new version? Please advise, thank you, BKSunshine

Yes - if nothing goes wrong - which is why you must always have a good current bacup prior to any update/upgrade
LN

Error while saving new Version

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

While updating new version of software internet stoped working and now it will not reconise my ipod and it stays on one screen with the apple sign and a bar running horrizontle underneath

while downloading a new version of software the internet dropped out and now itunes Wont reconise my ipod and on the ipods screen their is the apple sign and a load bar running horizontaly can someone help me

- First try resetting your iPod. Than may make the iPod visible in iTunes o you can restore it.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if placing the iPod in recovery mode will make it visable. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Lastly see if DFU mode will make it visible.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Left airport on while updating new version

I forgot my phone was in airport mode and I hooked it up to my computer and tried to download the new version. Unfortunately, it now has me completely locked out with a screen showing the itunes logo and a usb plug. I can see the airplane at the top so I'm sure this is my problem. The error I got in itunes was "The iPhone "iPhone" cannot be used with iTunes because the information required for activation could not be obtained from the iPhone. Check that the SIM card is inserted in your iPhone and that it is not PIN-locked." Unfortunately, I can't unlock it or do anything. Help!
Thanks.

- First try resetting your iPod. Than may make the iPod visible in iTunes o you can restore it.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if placing the iPod in recovery mode will make it visable. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Lastly see if DFU mode will make it visible.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Pointers for upgrading to new version of SQL Server?

We're running SAP Business One 2007 A (8.00.181) SP:00 PL:49
At the moment we have a dedicated server computer to host the SQL databases for this product. The server computer is 32-bit Windows Server 2003. The database server is SQL Server 2005 32-bit. This server was purchased in fall 2006 and had a fast disk subsystem for its day: 5x 15K UltraSCSI hard drives in RAID5.
We have several company databases, some of which are in the 12 - 13GB range in size. There are occasions where two or more of these large-ish databases may be in use simultaneously. Since SQL Server on the current server limits itself to 2GB RAM usage, I suspect there is a lot of paging to disk when multiple company databases are open, with a major hit on performance.
Windows Server 2003 goes end-of-life on July 15, 2015. SQL Server 2005 end-of-life is April 14, 2016. As part of a refresh of company IT infrastructure, we're considering replacing various physical servers with virtual servers. Ideally, we'd like to migrate the backend to a current version of SQL Server on a current Windows server OS, and also move to a 64-bit platform so we can allocate more RAM to SQL Server. We may also host virtual hard drive file(s) on SSD if/where that makes sense.
What I've found so far:
All the current SAP databases are Compatibility Level 90 (native SQL Server 2005)
The latest version of SQL Server that supports Compatibility Level 90 is SQL Server 2012. SQL Server 2014 drops support for 90. I assume it's a bad idea to change the database compatibility level?
If for any reason we have to stick with SQL Server 2005, the latest version of Windows that supports that is Server 2008 R2. That's not ideal, since in a perfect world we would want all virtual machines running Server 2012 R2
Moving to a 64-bit version of SQL Server requires a so-called "side-by-side" upgrade, it's not possible to use a SQL Server upgrade wizard
The VAR we used to install and configure the product in 2006 is no longer in business so we'd like (if possible) to do this ourselves. I'm a software developer familiar with client-server development, SSMS etc. so I feel reasonably confident in undertaking a side-by-side upgrade.
So, assuming we'd like to migrate the backend to 64-bit SQL Server 2012, can anyone offer any pointers, experiences, or things to watch out for?
There are also some services running on the current server computer, which I'm assuming will also need to be migrated:
SAP Business One Integration Service
SAP Business One License Manager 2007
SAP Business One Messaging Service
I get the feeling other people may have asked similar questions before, but I couldn't find any relevant posts.
Thanks in advance for any help.

You probably need to do an installer file clean up for Apple Software Update with the Microsoft Installer Cleanup Utility.
Here is a method for removal and clean up of iTunes and related programs. You might get away with just doing the Apple Software Update part rather than the whole thing. I would try just removing and cleaning ASU first.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Error message while downloading new version of iTunes

I've tried downloading an updated version of iTunes several times, but I continue to get this error message:
An error occured during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800736B3.
Any suggestions on what to do?

i'm assuming the Error code HRESULT: 0x800763b3 means something and is the solution but where can i find the answer or am i going about this all wrong?
Yeah, this 0x800763b3 is a slightly unusual one. Normally with these, the iTunes install error code matches the error codes that people get on their Windows Update failures. But for the last two 0x800763b3s I've been involved in on an iTunes install (Liv and someone else), the 0x800763b3 on the iTunes install has been associated with an 0x8007000b on the Windows Update failures. (Liv's 643s were pretty much "generic" error message codes for Windows Update failures, which could mean anything. So that's why I/we went after the 0x8007000b, which has some Microsoft documentation on fixes.)
Doublechecking on other symptoms of your situation ... is your Windows Update not opening at all when you try to launch it?
If so, when you click "Turn Windows features on or off" in the "Programs and Features Control Panel" item, is the Windows Features dialog box empty? (No features are shown?)
(If we can't get the codes from the windows update failures, we might be able to make some progress if we can identify other symptoms that you're getting. I know some documentation for some of these codes that mentions the Windows Features thing as a possible additional symptom.)

I lost my playlists while downloading new version

I was downloading the newest version of itunes that contained icloud. Somehow I lost all of my music that was on my ipod. I erased 3/4 of all of my music from hard drive. How can I get my music back or can I?

iPhone Data Recovery - Easily Restore Lost Data from iPhone

Downloading new tunes without wiping out all of my current music on my iPod. How do I keep my existing tunes while loading new tunes?

I read that I can make a playlist & maually download that, but what if I am downloading numerous (many) whole CDs?

Your iPod is designed to mirror your iTunes library. So if you remove content that was originally stored in your iTunes library, it will be removed from the iPod as well the next time you sync it.
If you want to avoid this from happening, you'll want to set up the device for manual management.
Managing content manually on iPhone, iPad, and iPod
B-rock

Instances not displaying in the workspace with new version

Platform: ALBPM 6.0.4 Enterprise StandAlone on AIX.
We had a project deployed and set up with users assigned to two different roles: analyst and support.
There were views that were associated with both roles that allowed them to see all completed instances or In process instances no matter who the instances were assigned to.
This version was 1.1.1 and everthing was working fine.
When a new project version was deployed the version number changed to 1.2.0.
People with the support role can not see the new instances created in the new version - even if they do a search.
People with only the analyst role can see all instances - old and new versions.
People with both roles can only see the old version, even if they do a search.
Any ideas?

We may have found the problem. The participant who was assgined to the Support role did not have the same organization as what was associated with the new version of the project when it was deployed. Also, the previous version of the project was not associated with any organizational unit. We added the organization unit to the participant and now it works.

The installer thinks a newer version of QuickTime exists.

I tried to upgrade to iTunes 7.6, but I couldn't, so I tried installing it manually. I uninstalled iTunes and QuickTime, but when I went to install iTunes I got the following error message. "A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed." I am running Vista. Any help would be great. Just keep in mind that I am not very computer smart.

I now have the exact same issue. I have thoroughly cleaned any trace of Itunes or Quicktime including the Registry and still it thinks there is a version of quicktime on this pc. I was able to find an older Quicktime and Itunes 7.5 and they will install, but I didn't run it before trying to run the 7.6 version install. It continued to say a new version of Quicktime was there but its not. I don't know where they are looking to see if a version exists. They should have a way to force an install to overwrite no matter what is on a PC. Are you listening APPLE??????? Get with the rest of the software world. Guess I should go get a Zune...

Object link selection (Required) by user while new version creation

Hi All,
In ECC 6 While creating the new version of DIR ,SAP easy DMS is showing pop up to select the existing object link , how can we stop this and enable to copy the existing object link in new version which working fine in SAP R/3 4.7.
Regards
shiv

Dear Shiv,
you can change this behavior in the customizing of the document type in transaction DC10 for each object type.
Just go to DC10 and mark the affected document type. Then click on "Define object links" and double click on the object type. On the next screen you should see a field called "When New Version". Here you can use the F4 help to choose which behavior you want to have.
Best regards,
Christoph

How to use existing leaderboard in a new app version?

I have a live game in App Store, with a leaderboard.
Now I'm releasing a new version. I have a new version set up in iTunes Connect, but I'm not able to select the existing leaderboard for this new version.
How to do that? I assume it must be possible, as players should not lose any data or progress in the game when a new version is released.

Here's a screen shot of how iTunes Connect's UI looks like. As said, the existing leaderboard can not be selected from it. (Normally I see a small "Edit" button next to "Leaderboards" header from which the leaderboards can be selected.)

Can't install Quicktime - Error "A newer version of quicktime already..."

Hi, I have a Dell XPS running Windows Xp Media edition. Quicktime files would not play so I downloaded the newest version of Quicktime and an error comes up saying, "A newer version of quicktime is already installed. This installation of Quicktime can not proceed while the newer version is installed." I can't find a newer version on the computer and the application seems absent. Only suplimentary Quicktime files are found. Please help.
Thanks,
Eric
Dell XPS Windows XP

I'm having this exact same problem. I have a Gateway running Windows XP Media Edition.
I can't run quicktime, it says it's not there. I've tried uninstalling using add/remove and it says the uninstall.log file is missing. I tried uninstalling using the QT uninstaller option in its folder, it says the uninstall.log is not there. I tried 'repair' option on the iTunes+QT installer that I downloaded. Still the same issue.
I tried the stand alone QuickTime installer and it tells me "A newer version of quicktime already exists".
I tried deleting the residual quicktime folders from my c:\program files. I tried deleting the residual QT references from my regedit. I downloaded the MS Windows Install Clean Up and looked in there--found 2 more things that could possibly be quicktime related and removed those. I tried again -- same error message.
I'm not sure what else to do. I'd really like to get Quicktime and iTunes working by Christmas so I can sync my shiney new iPod.

Installing New version QuickTime and ITunes

I have exhausted all the standard installation help. Every time I try to install the latest version I get the following: Cannot open HKEYLOCALMACHINE|Software|Classes|QuickTime.QuickTime|CLSID
Verify you have access
I assume this is a registry problem - I am logged on as administrator and have run a registry cleanup programme. Any suggestions?

as installation begins it starts running the QuickTime install and says "A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed". Funny thing is....it won't let me uninstall QuickTime because it gives me the same error as mentioned before
Okay. Let's try removing your existing QuickTime by other means than the "Uninstall a program" control panel.
Download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue.
(5) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(6) Restart your computer.
Now try another iTunes install. Does it go through properly now?

Existing instances while publising new version in ALBPM server

Similar Messages

Maybe you are looking for