Exit/BADI needed for updating the PERNR data in infotype 0105

Hi team,
We are getting the external system data through IDocs and we need to process the data in our systems,
But the PERNR in external system is different than in our system.How we can handle this .
is there any USerexits/Badi's available for this to handle.
Please let me know the solution if anybody encounter this problem earlier.
Thanks for your help
Regards
Murali

Hello Murali,
If you are using HRMD_A message type the function module IDOC_INPUT_HRMD contains lot of exits and badi's
here are few
EXIT_SAPLRHA0_003 - Include ZXHALU07
EXIT_SAPLRHA0_002 - Include  ZXHALU06
you may do more research in the function module  IDOC_INPUT_HRMD

Similar Messages

  • User exit/ badi needed for planned order create/change,collective ATP check

    Dear All,
    I'm looking for a user exit/ badi which can be used for planned orders at the stage of
    mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
    I need after collective availability check to perform the following:
    1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
    then
    2) to start a scheduling.
    Very appreciate your help.
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
    Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

    Dear,
    Use the BAPI : BAPI_PLANNEDORDER_CHANGE
    Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
    and the transaction MDAC Execute action for planned order
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Please refer this thread,
    Re: MDVP for collective orders
    Regards,
    R.Brahmankar

  • User-exit/BADI needed for SD related FI documents

    Hi ,
    does anyone know of a function-exit/BADI that is executed in FI document creation (SD related) at a point in the logic after EXIT_SAPLV60B_008?  I need to be able to manipulate internal table XACCIT after the standard FI item aggregation has occured but this exit is excuted prior to the aggregation.
    Many thanks,
    Annie

    thanks Brad - I decided to stick with the one I had and use alternative logic within it - seems to be working ok.
    thanks again, annie

  • Hi all, i need to create a one method in assistance class for updating the custom table.

    Req as follows : 
    1. i need to create one method in a assistance calss  for updating custom table .
    2. now i  have to pass the multiple entries to that table then inside the method based need to update the Ztable. based on this entries
    3. My internal table is having 2 fields ( Customernumber (key field) , Shiftloc ).(Multiple entries ex : 500)
       based on customernumber need to update the new shiftloc in my custom table.
    Can any one give some inputs please. i have doubt can we pass mupltiple entries (internal) as a importing parameter to the method?
    Cheers,
    Venu

    Hi rama,
    thank you for your promt reply.
    i have one more query. Here i need to update the only Shipt to adress for particular customer number.
    i have written the code as below. Please clarify this code will work for my requirement.
       method UPDATE_SHIPTO.
      data : Lt_contract type ty_update_shipto_t.
      data : ls_contract like line of  Lt_contract .
      REFRESH : Lt_contract.
      lt_contract[] = LT_DATA[].
      loop at lt_contract into ls_contract.
    *    update  Zcustom  SET ship_to_adress  = ls_contract-new_bp
                                 WHERE  cust_no = ls_contract-custnum
        CLEAR : ls_contract.
      ENDLOOP.
    COMMIT WORK.
    endmethod.

  • Need to update the actual start date & time of a operation in workorder

    Hi Experts,
                   I need to update the Actual Start date and Actual start time of a Operation of  a WorkOrder through a Function Module.
    I was looking into the BAPI_ALM_ORDER_MAINTAIN FM, but i couldn't find any field relating to the actual start date and start time of a operation.
    Kindly Suggest me which Function module i can use to complete my task.
    Thanks in Advance
    bye

    Hi,
    It is system's standard behavior and no other MRP type will help you in moving the start date outside the planning time fence. With MRP type P3 new requirements are covered at the end of the fixing period, the end date is set and planed order is scheduled backword. Hence the start date will lie within the planning time fence.
    Rgds,

  • In OWB I need to update the target table with same field for match/update

    In OWb I am trying to update the target table with the match and the update on the same field can this be done. I am getting a error match merge error saying you cannot update and match on the same field. But in SQl my select is
    Update table
    set irf = 0
    where irf = 1
    and process_id = 'TEST'
    Hwo do i do this in OWB.

    table name is temp
    fields in the table
    field1 number
    field2 varchar2(10)
    field3 date
    values in the table are example
    0,'TEST',05/29/2009
    9,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009
    In the above example I need to update the first row field1 to 1.
    Update temp
    set field1 = 1
    where field1 = 0
    and field2 = 'TEST'
    when I run this I just need one row to be updated and it should look like this below
    1,'TEST',05/29/2009
    9,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009
    But when I run my mapping I am getting the rows like below the second row with 9 also is getting updated to 1.
    1,'TEST',05/29/2009
    1,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009

  • CRM-ISU: Need to change the END date and Start Date for contract items

    Hi,
    There is an old contract item for which  I need to change the end date
    and there is a new contract item for which I need to change the start date.
    I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
    I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
    but how to change the start date of a new contract item?
    Please let me know if any body is aware of this?
    Thanks

    Hi,
    Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
    Regards,
    Surjith

  • Need to update the business place and section code for the advances

    Hi,
    I need to update the business place and section code for already posted advance payment requests (f-47), advance payments (f-48) and clearing documents (F-54).
    I can able to update the business place and section code for only invoices those are coming from MM route in J1INPP.
    guide me
    sateesh

    Hi ,
    Please follow the below point as per note no 640231
    2.  Path : Transaction SM31 . Enter the table name as TRWPR and press
                                                                      Page 2
        maintain .
        a) Delete all entries linked to component ZIND if they are present.
        b) Check that, entries as specified below exist for Component IND.
           Business
           Tran.    Time     No    Component        Function Module
           DOCUMENT CLOSE    043   IND              J_1I6_UPDATE_BA
           DOCUMENT CLOSE    044   IND              J_1IEWT_UPDATE_SECCO
           DOCUMENT PREREV   810   IND              J_1I6_CIN_DOC_PREREV
           DOCUMENT CLOSE    810   IND              J_1I2_COPY_TO_LOCAL
           RABELEG  ERGAENZE 810   IND              J_1IEWT_COPY_BUPLA_FBZ
           BELEG    POST     810   IND              J_1ITDS_TABLE_UPDATE
           DOCUMENT CHECK    810   IND              J_1I6_VALIDATE_GR
           DOCUMENT POST     811   IND              J_1IEWT_UPDATE_PROVISION
           BELEG    POST     811   IND              J_1IEWT_UPDATE_PROVISION
           BELEG    CLOSE    820   IND              J_1I2_COPY_TO_LOCAL
           DOCUMENT CHECK    820   IND
           J_1I6_VERIFY_GR_EIC_QUANTITY
           DOCUMENT CLOSE    820   IND              J_1I6_COPY_TO_LOCAL
           DOCUMENT CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL
           DOCUMENT POST     821   IND              J_1ITDS_TABLE_UPDATE
           BELEG    CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL.
        For the first two entries which are marked with sequence number 43
        and 44 for the Business Transaction 'DOCUMENT' and Time 'CLOSE' ,
        ensure that the sequence number is below the number for function
        module FI_DOCUMENT_CLOSE. This is to ensure that these two functions
        are processed in time for other checks in Financial Accounting.
    MIRO documents also will update the Business place section code.
    Reg
    Madhu M

  • Hi anyone. Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB. I've never needed one previously but I now need to update the firmware on my camera. Can I get one, if so which one's best? Many thanks.

    Hi anyone.
    Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB.
    I've never needed one previously but I now need to update the firmware on my camera.
    Can I get one, if so which one's best? Many thanks.

    Hello,
    If it is a PowerBook G4 with a PC Card slot, you have two possibilities. You could buy a USB card reader for SD, or a PC Card adapter (such as SanDisk's 6-in-1adapter). Please note that you are or may be limited to plain SD (that is, not SDHC) unless otherwise noted. For a USB reader, make sure that it has Mac support. BTW, is an SD card absolutely necessary for the firmware update; is there not a way of updating via cable? If you post back with the camera model, someone may be able to provide additional information.
    Jan

  • Custome Process for update the date

    Hello Every one,
    I have a page with the check-box where the user can select a record and update the record by pressing on the button.
    I have three processes, and each of these process update one field ( which is a date field) of the page by pressing on the specific button. here are the three processes:
    declare
    begin
    for i in 1..apex_application.g_f01.count loop
    UPDATE  REC_RET_ADD_RECORD
    SET DATE_ADMIN_APPROVED=:P8_DATE_ADMIN_APPROVED
    WHERE REC_RET_ID = APEX_APPLICATION.G_F01(I);
    end loop;
    commit;
    end;
    Condition: When Admin button pressed (submit)
    The second process:
    declare
    begin
    for i in 1..apex_application.g_f01.count loop
    UPDATE REC_RET_ADD_RECORD
    SET DATE_COMMITTEE_APPROVED=:P8_DATE_COMMITTEE_APPROVED
    WHERE  REC_RET_ID = APEX_APPLICATION.G_F01(I);
    end loop;
    commit;
    end;
    Condition: When Committee button pressed (submit)
    The third process:
    declare
    begin
    for i in 1..apex_application.g_f01.count loop
    UPDATE REC_RET_ADD_RECORD
    SET DATE_OHS_APPROVED=:P8_DATE_OHS_APPROVED
    WHERE  REC_RET_ID = APEX_APPLICATION.G_F01(I);
    end loop;
    commit;
    end;
    Condition: When OHS button pressed (submit)
    Now the problem is, when the user selects the row and selects the date for Admin field and presses the Admin button, the system inserts the date but after that if the user wants to selects the same row and update the OHS date, the system will remove the date for Admin field and inserts the OHS date in OHS field and visa verse.
    I don't know why this is happening. Could you please help me. I appreciate it.

    Here is the report query:
    SELECT  apex_item.checkbox (1,
                               REC_RET_ID,
                               'onchange="spCheckChange(this);"',
                               :f_REC_RET_ID_list,
                              ) checkbox,
    "REC_RET_ID",
    "RET_SCHEDULE_NUM",
    "RET_COST_CENTER",
    "RET_TITLE",
    "RET_TITLE_DESC",
    "RET_PERIOD",
    "DATE_USER_INSERTED",
    "DATE_ADMIN_APPROVED",
    "DATE_COMMITTEE_APPROVED",
    "RC3_FORM_REQUIRE",
    "DATE_OHS_APPROVED",
    "DESTRUCTION_SUSPENDED",
    "DESTRUCTION_SUSPENDED_NOTE",
    "INACTIVE_DATE",
    "INACTIVE_DATE_APPROVED",
    "CREATION_DATE",
    "CREATED_BY",
    "LAST_UPDATE_DATE",
    "LAST_UPDATE_BY"
    from REC_RET_ADD_RECORD

  • Need a PLSQL API for update the oe_order_headers_all table

    Hi all,
    I need a PLSQL API for update the oe_order_headers_all table.
    Anyone know please help me.
    Regards,
    M.Soundrapandian.

    Use the Process Order API to update this table.
    Note: 746787.1 - Process Order API In Order Management
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=746787.1
    Oracle Order Management Open Interfaces, API, & Electronic Messaging Guide
    http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115omapi.zip
    Oracle Integration Repository
    http://irep.oracle.com

  • On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating.  They just flash on the screen but don't stay displayed.  What is going on?

    On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work.  They would just flash when I tapped the screen to bring them up but will stay displayed.  What is the problem?

    I Also have this problem!!
    In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason.  At first I thought the screen was dead, but discovered the heat solution by accident.  Now I turn it on and keep it from going to sleep until I go to bed.  Thank goodness the battery is still awesome on this thing.
    I bought it new and still has the original screen, I keep it at home (never below 62 degrees).  Coincidentally, this happened a day or two after the expiration of the warranty!!  Any help figuring this one out would be eternally appreciated.
    iPad mini retina Wi-Fi, iOS 8.1.3

  • BAdI needed for transfer order split with the maxi.of 5 item level

    Hi,
    BAdI needed for transfer order split with the maximum of 5 item level.
    If a transfer order contains 12 item level, three separate transfer order should be created with item level 5,5 and 2.
    This transfer order is for the material which bound to flow to production from warehouse.
    Can anyone explain the step by step procedure to implement this BAdI?
    It would be great if the procedure is for New BAdI.
    Thanks.

    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    The specified item was not found.
    http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
    http://support.sas.com/rnd/papers/sugi30/SAP.ppt
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://members.aol.com/_ht_a/skarkada/sap/
    http://www.ct-software.com/reportpool_frame.htm
    http://www.saphelp.com/SAP_Technical.htm
    http://www.kabai.com/abaps/q.htm
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.planetsap.com/download_abap_programs.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    http://www.allsaplinks.com/badi.html
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3430https [original link is broken] [original link is broken] [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

  • How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

    Hi Experts,
    Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
    Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
    I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
    Please help urgently.
    Advance Thanks,
    BW USA

    If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
    For example, you want to download 0EMPLOYEE
    1-In PRD, transaction RSD1
    2-Enter 0EMPLOYEE
    3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
    4-transaction SE16
    5-Enter the table name /BI0/MEMPLOYEE
    6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
    7-Execute
    8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
    9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
    Asigns points if useful.
    Regards

  • Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

    Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

    Apps are permanently tied to the ID used to purchase them.
    Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
    Then, log into the app store with it and update the apps purchased with that ID.

Maybe you are looking for