Exit button doesn't work

On .swf files, the Exit button in the skin doesn't close the
file (it works just fine if the file is .exe). All the other
buttons work fine. Any ideas?

Hi, I know this issue was a long time ago, but I am experiencing the same problem with a course that has been loaded into the LMS, the exit/close button on the playbar isn't working. I am using Captivate 5. I have published using AICC rather than SCORM, as there were some issues with the passing over of scores from the e-learning programme I'd built to the LMS which were resolved by using AICC. The close/exit button however did work when it was originally published using SCORM!
I'm considering just removing the exit/close button on the programme and putting a message at the start and at the end to say just close browser window to exit the programme.
I'd be very grateful if anyone could advise if there is anything else anyone could recommend trying?
Thank you
Sarah

Similar Messages

Windows exit button doesn't work

Hi,
Does anybody know why the windows' red exit button doesn't work for my program?
Thanks

Hamed_47 wrote:
The close button is set to be in the menu, so I it's not in tle list of this close control.
Sorry, I did not understand what you mean.
The ring control lists all the controls you have on the panel, and usually there is a QUIT ot EXIT button. You may want to select this one.
What this ring control does is equivalent to setting the ATTR_CLOSE_CTRL programmatically, i.e. you define the ID of the control for which a commit event is generated when you select the Close item in the Windows system menu.

Exit Customize doesn't work - other questions...

Firefox updated to Beta 29 (i didn't do it x_x) and everything is confusing me right now. Actually pissing me off to be honest. I was playing around this new, tried to customize it but didn't work. I followed this page and nothing. https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars the Exit Customize doesn't work at all. I have to quit firefox using Alt+F4 and start all over.
So, that doesn't work for me. How do I go back to the previous version of Firefox or how do I undo this Beta 29 thing? I really don't like it.

You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Exit Command doesn't work

Guys, I've put a few hours researching the web for code examples on how to program the Exit button on a J2ME app. It didn't help me finding out why my Exit simply doesn't work. It must be something trivial that I'm just not aware of. I would really appreciate your help analyzing the following code.
Regards,
Filipe
public class BiblioMIDlet extends MIDlet implements CommandListener {
     private Display display;
     private Form gui;
     private static Command renewCommand, exitCommand;
     public BiblioMIDlet() {
          renewCommand = new Command("Renew", Command.ITEM, 1);
          exitCommand = new Command("Exit", Command.EXIT, 1);
          gui = new Form("Biblio");
          display = Display.getDisplay(this);
     protected void startApp() throws MIDletStateChangeException {
          this.showLoginForm();
     private void showLoginForm() {
          TextField user = new TextField("User", null, 9, TextField.NUMERIC);
          TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
          gui.append(user);
          gui.append(password);
          gui.addCommand(renewCommand);
          gui.addCommand(exitCommand);
          display.setCurrent(gui);
     protected void pauseApp() {     }
     public void commandAction(Command c, Displayable s) {
          if (c == exitCommand) {
               destroyApp(false);
               notifyDestroyed();
     protected void destroyApp(boolean arg0) {      }
}

Hai
I think u missed to add the commandListener in your code "gui.setCommandListener(this)"
public class BiblioMIDlet extends MIDlet implements CommandListener {
     private Display display;
     private Form gui;
     Command renewCommand, exitCommand;
     public BiblioMIDlet() {
          renewCommand = new Command("Renew", Command.ITEM, 1);
          exitCommand = new Command("Exit", Command.EXIT, 1);
          gui = new Form("Biblio");
          display = Display.getDisplay(this);
     protected void startApp() throws MIDletStateChangeException {
          this.showLoginForm();
     private void showLoginForm() {
          TextField user = new TextField("User", null, 9, TextField.NUMERIC);
          TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
          gui.append(user);
          gui.append(password);
          gui.addCommand(renewCommand);
          gui.addCommand(exitCommand);
/* u missed this line of code in your program*/
          gui.setCommandListener(this);
/* End */
          display.setCurrent(gui);
     protected void pauseApp() {     }
     public void commandAction(Command c, Displayable s) {
          if (c == exitCommand) {
               destroyApp(false);
{ notifyDestroyed();
     protected void destroyApp(boolean arg0)      }
regards
jinesh

I'm trying to set up a new feed reader (Brief) using Live Bookmarks but the suscribe button doesn't work. Anyone got a solution to this?

I'm currently using Google reader for my feeds but Google is discontinuing it in July. So I need a new feed reader option. I am trying to set up the Brief add-on as my reader, using Live Bookmarks but when I attempt to subscribe to a feed, the subscribe button doesn't work.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

My iPod 5th generation won't turn on and my middle button doesn't work

My ipod 5th generation won't turn on and my middle button doesn't work! What will I do? It all starmed when I updated iOS 8. It would be fine but would shut down at random, now it won't turn on at all!!! when I press the lock button to turn it on the Apple sign would come up for about 5/10 minutes!! so what will I do???

Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty\

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem besides the button and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue?

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons

Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit

My Ipod has a blank white screen and my home button doesn't work

My Ipods screen just went totally blank white and my home button doesn't work anymore any #Advise ??
i've seen the other videos i can do it but my home button doesn't work ??

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Install of 9idatabase on Linux...NEXT button doesn't work...

Hello,
I'm fairly new to the linux world and I'm trying to install Oracle for my new Linux box running the latest Mandrake. I'm pretty sure I've followed all the preparatory steps before installing oracle9i. The problem is, when I start the runInstaller, it appears that the Initializer hangs or something, and the Welcome menu appears...but the NEXT button doesn't function to take me to the next screen. I tried last week to install an older 8.1.6 version for Linux and it did the same thing. The exit button won't work, but the close button on the top right functions. Some of the other buttons work as well, like the About button and the Installed components button, but never the NEXT button.
If anyone has any clue why this is happening, PLEASE help! It's rather frustrating to run through all those preperatory steps just for a simple next button to function improperly.
Thanks in advance!
Tom

Wow...pretty silly indeed. Unbelievable. I've never seen something like that actually, rather frustrating to sit on a problem all day and the problem turn out to be that your num lock key is depressed...duh! Joseph, thank you for the help, I actually have the documentation from your website installing 9i for Mandrake 8.1. So far it's been very helpful, if I have any troubles you may be hearing from me today. Thanks again!
Tom

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

Volume and Power button doesn't work..how do I fix?

My son's volume buttons or the power button doesn't work. Is there something I can do to fix these issues?

Try the following to rule out a software problem.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

"Submit to SAP" Button doesn't work

Hi to all,
I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url] seems not to work. Where can I find it?
Thank you very mich,
Enrico

Hi Enrico,
You can download it from the below link:
http://www.esnips.com/web/arafatfNewFolder/
Let me know once you are done so that I will delete the link.
Regards,
Arafat

Exit button doesn't work

Similar Messages

Maybe you are looking for