Exit message for air?
Can I exit with an error message instead of an integer? like nativeapplication.exit("some tests failed") or something like that?
what about passing a string to an ant script? like an ant script calls adl.exe and it runs the swf, could you output a string to an ant variable/property?
Similar Messages
-
User-Exit message for Purchase Order
Hello,
I've implemented a specific type of message (ZNEU) for purchase order.
With some specifics conditions (not managed in SPRO), I'd like that the ouput message of a purchase order is either the standard one NEU or my specific ZNEU..but noth both as actually.
Is there any user-exit where I can code and change the ouput message determination ?
Thanks a lot in advance.
Best regards
Fanny PONEL ( GROUX).No user exit for this but this can be control by MN04.
Here you can control the ouyput type trigger
youmay need to configure the access seq and maintian that for your ZNEU conditon. -
Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5
imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
Adobe Air
the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
Tried several times to uninstall and reinstall from fresh download to no avail.
I'm finding the instructions in the trouble shooting area a tad esoteric.
Will there be an update to the installer released soon?Hi,
I'm assuming your having troubles installing the 2.0.3 runtime? If so, can you please try the instructions in this post?
Thanks,
Chris -
Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?
Hey ronniefai,
Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
Viewing the Print Summary
You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
Note: Print Center is available only while printing is in progress.
via AirPrint Basics
http://support.apple.com/kb/HT4356
If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
Thanks,
Matt M. -
I love the feature in Outlook that lets me flag a message for follow-up and automatically adds a default reminder at the end of the day. Is this something I can configure my Blackberry 9900 to do (running 7.1)?
As far as I can tell, when I flag something for follow-up, it adds a flag but does NOT add any reminder alerts. If I want to do that, I then need to manually add the reminder and set it (which is a little cumbersome).I guess timed message is on the wish list
However in all my forms I use following scenario to validate all data entry at one time and then submit...
I use regular button and add code in Click event
JS example.....
var errorFlag = 0;
var errorMsg = "";
if (validation expression 1) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message1" + "\n"; //\n for new line with in the message
if (validation expression 2) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message2" + "\n"; //\n for new line with in the message
//finally
if (errorFlag > 0) {
//>0 indicates there are one or more errors
xfa.host.message(""+errorMsg);//display all messages at one time
exit; //now since there are validation errors you can stop processing further and exit the event
//add submit code......here.... -
Error Message for the cancellation of paid billing document
Hi,
Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
Overview:
Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
Thank you and best regards.
RachelleHi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai -
Exit/badi for Material group validation on service POs
Hi Gurus,
The requirement is to put validation on 'MATERIAL GROUP' at item level as well as service sub line item level.I have used EXIT_SAPMM06E_017 for line level validation.
For service sub line level 'MATERIAL GROUP' i tried using EXIT_SAPLMLSP_030 but validation is not working properly as
EXIT_SAPLMLSP_030 is triggered before EXIT_SAPMM06E_017.
Kindly suggest any alternatives.
Thanks in advance
DeepikaHi,
I had finally used BADI ME_PROCESS_PO_CUST method CHECK and PROCESS_ITEM for enjoy transactions i.e ME21N ME22N ME23N and written code in EXIT EXIT_SAPLMLSP_030 for service item validations.
IF sy-tcode = 'ME21N' OR sy-tcode = 'ME22N' OR sy-tcode = 'ME23N' OR sy-tcode = 'MASS' OR sy-tcode = 'ME29N'.
DATA: wa_zmm_mat_grp TYPE zmm_mat_grp.
EXPORT header_data-aedat FROM header_data-aedat TO MEMORY ID 'ZDAT24933'.
EXPORT header_data-bsart FROM header_data-bsart TO MEMORY ID 'ZBRT24933'.
IF header_data-aedat GE '20090810'. " Material group mandatory appplicable date.
IF ( header_data-bsart = 'SRV' OR header_data-bsart = 'SRVF' OR header_data-bsart = 'SRVI') AND ( header_data-bsart NE ' ') AND
( re_data-loekz EQ 'S' OR re_data-loekz EQ ' ' ).
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = re_data-matkl AND
bsart = header_data-bsart.
IF sy-subrc NE 0.
MESSAGE e005(ze1).
ENDIF.
ENDIF.
IF header_data-bsart IS NOT INITIAL.
IF ( header_data-bsart NE 'SRV') AND ( header_data-bsart NE 'SRVF') AND ( header_data-bsart NE 'SRVI') AND
( re_data-loekz EQ 'S' OR re_data-loekz EQ ' ' ).
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = re_data-matkl.
IF sy-subrc EQ 0.
MESSAGE e006(ze1).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
For service subline item following code:
DATA: wa_zmm_mat_grp TYPE zmm_mat_grp,
v_bsart TYPE ekko-bsart,
v_packno TYPE esll-packno,
v_ebeln TYPE ekpo-ebeln,
v_aedat TYPE ekko-aedat.
IF sy-tcode = 'ME21N' OR sy-tcode = 'ME22N' OR sy-tcode = 'ME23N' OR sy-tcode = 'MASS' OR sy-tcode = 'ME29N'.
IF srv_esll-matkl IS NOT INITIAL.
IMPORT header_data-bsart TO v_bsart FROM MEMORY ID 'ZBRT24933'.
IMPORT header_data-aedat TO v_aedat FROM MEMORY ID 'ZDAT24933'.
IMPORT re_data-bsart TO v_bsart FROM MEMORY ID 'ZBRT24933'.
IMPORT re_data-aedat TO v_aedat FROM MEMORY ID 'ZDAT24933'.
IF v_bsart IS INITIAL OR v_aedat IS INITIAL.
SELECT SINGLE packno FROM esll INTO v_packno WHERE sub_packno = srv_esll-packno.
IF sy-subrc EQ 0.
SELECT SINGLE ebeln FROM ekpo INTO v_ebeln WHERE packno = v_packno.
IF sy-subrc EQ 0.
SELECT SINGLE bsart aedat FROM ekko INTO (v_bsart, v_aedat) WHERE ebeln = v_ebeln.
ENDIF.
ENDIF.
ENDIF.
IF v_aedat GE '20090810'. " Material group mandatory appplicable date.
IF ( v_bsart EQ 'SRV' ) OR ( v_bsart EQ 'SRVI' ) OR ( v_bsart EQ 'SRVF' ) AND ( v_bsart NE ' ' )
AND srv_esll-del = ' '.
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = srv_esll-matkl AND
bsart = v_bsart.
IF sy-subrc NE 0.
MESSAGE e005(ze1).
ENDIF.
ENDIF.
IF ( v_bsart NE 'SRV' ) AND ( v_bsart NE 'SRVI' ) AND ( v_bsart NE 'SRVF' ) AND ( v_bsart NE ' ' )
AND ( srv_esll-del = ' ').
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = srv_esll-matkl .
IF sy-subrc EQ 0.
MESSAGE e006(ze1).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ELSEIF sy-tcode = 'ME21' OR sy-tcode = 'ME22' OR sy-tcode = 'ME23'.
IF srv_esll-matkl IS NOT INITIAL.
IMPORT i_ekko-bsart TO v_bsart FROM MEMORY ID 'ZPOT24933'.
IMPORT i_ekko-aedat TO v_aedat FROM MEMORY ID 'ZDTA24933'.
IF v_bsart IS INITIAL OR v_aedat IS INITIAL.
SELECT SINGLE packno FROM esll INTO v_packno WHERE sub_packno = srv_esll-packno.
IF sy-subrc EQ 0.
SELECT SINGLE ebeln FROM ekpo INTO v_ebeln WHERE packno = v_packno.
IF sy-subrc EQ 0.
SELECT SINGLE bsart aedat FROM ekko INTO (v_bsart, v_aedat) WHERE ebeln = v_ebeln.
ENDIF.
ENDIF.
ENDIF.
IF v_aedat GE '20090810'. " Material group mandatory appplicable date.
IF ( v_bsart EQ 'SRV' ) OR ( v_bsart EQ 'SRVI' ) OR ( v_bsart EQ 'SRVF' ) AND ( v_bsart NE ' ' )
AND srv_esll-del = ' '.
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = srv_esll-matkl AND
bsart = v_bsart.
IF sy-subrc NE 0.
MESSAGE e005(ze1).
ENDIF.
ENDIF.
IF ( v_bsart NE 'SRV' ) AND ( v_bsart NE 'SRVI' ) AND ( v_bsart NE 'SRVF' ) AND ( v_bsart NE ' ' )
AND ( srv_esll-del = ' ').
SELECT SINGLE * FROM zmm_mat_grp INTO wa_zmm_mat_grp WHERE matkl = srv_esll-matkl .
IF sy-subrc EQ 0.
MESSAGE e006(ze1).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
hope this will help u. -
User-Exit/Badi For Vendor Down Payment Request
hi All,
Is there any user-exit or badi available for vendor down payment request?
tcode:f-47.
please let me know.
Thanks & Regards,
RajI want to trigger an event for workflow when
a vendor down payment request is created in
*tcode f-47.*
Well if you are not able to find the correct enhamcement spot then you can approach as below
When ever you create a New Item In the Tcode F-47 the if you succesfully saves the data then it prompts you a message like below
*Document 1700000000 was posted in company code 2100*
So instead of searching for Exits or BAdi's try to Start workflow by using the message
for this all you need to bind the message and the Workflow , for this you have use the transaction SWUY it is a wizard where you need to specify the Message class and the message number -
Mail messages disappear - just a blank mail message for all emails
Mail messages disappear - just a blank mail message for all emails.
This happens sporadically since I upgraded to Yosemite 10.10.2.
It happens on all of my machines (Macbook Air, + iMacs) so it must be a software bug.
Is there an update coming through for Mail?Back up all data. Rebuild the mailbox.
-
Here is how to enable full screen mode for AIR Mac Desktop Apps
I just discovered that with a very simple native extension method, I can enable full screen mode for AIR Mac Desktop Applications.
This gets you the full screen icon in the top right, and it works perfectly with no changes to my code. (Obviously only works on Lion and above, since this is a Lion feature)
Enjoy.
Here's the code:
FREObject _EnableFullScreenMode(FREContext ctx, void* functionData, uint32_t argc, FREObject argv[])
//We should be okay to do this, even on 10.6, according to this post:
//http://www.cocoabuilder.com/archive/cocoa/311124-implementing-full-screen-for-10-7-but-app-should-also-run-on-10-6.html
//We can't use [NSApp mainWindow] - didn't appear to work
//This seems to though:
NSArray * allWindows = [NSApp windows];
if (allWindows.count > 0)
NSWindow *mainWindow = [allWindows objectAtIndex: 0];
NSWindowCollectionBehavior behavior = [mainWindow collectionBehavior];
behavior |= NSWindowCollectionBehaviorFullScreenPrimary;
[mainWindow setCollectionBehavior:behavior];
//TODO: Return a boolean instead depending on if we found the main window
return NULL;Press Control + Command + F on your keyboard to enter or exit full screen mode.
-
I found a exit CIFPUR02 for purchase order inbound process.is it suitable?
I found a exit CIFPUR02 for purchase order inbound process.is it suitable?
my idoc is PORDCR102 AND message type is PORDCR1. my requirement is this is EXIT should trigger before saving the data in me21n.
Edited by: rk.kolisetty on Jun 24, 2010 4:59 PMHi,
Following are the user exit relevant to T Code ME21n.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
Rgd,
Chetan -
I'm running v1 of TCS on a Dell Optiplex 755 w/4GB RAM. When
I run RoboHelp Packager for AIR on any output, repeat "any output,"
after I review the output and exit the packager, I get a BSoD. This
is dependable and replicable...10 times so far today trying to
diagnose it. Test has rulled out a RAM issue. Any advise?I may have found the issue:
When I spin an AIR application from WebHelp output and
preview the AIR application, or
when I Preview an application from the AIR Packager Generate
dialog,
if I Cancel the dialog before I close the AIR application,
the OS will BSoD every time;
if I Cancel the Generate dialog without first closing the AIR
application, the AIR Packager exits and returns control to me
without error, every time.
This sounds like a memory management bug of a garbage
collection bug.
When I close the fresh AIR application before I exit the AIR
Packager, apparently the AIR Packager attempts to clear memory,
finds that <some address> is already clear, and barfs with
"PAGE_FAULT_IN_NONPAGED_AREA" every time. -
Native Extension for AIR publishing error : framework not found
Hello,
I'm trying to build an iOS app using native extensions for AIR, but when I publish, I've an error message saying : framework not found
I tried with this ANE for GameCenter integration : https://github.com/StickSports/ANE-Game-Center
it says " ld: framework not found GameKit "
Same problem with GREE Platform SDK for AIR :
https://docs.developer.gree.net/en/globaltechnicalspecs/#sdkforair
it says " ld: framework not found CoreTelephony "
The thing is that these frameworks are already included, I guess.
I'm using flash cs6 on mac, and I've included the path to iOS SDK in the publishing settings.Are you using the ANE from there or are you recompiling the ANE at your end?
If you are recompiling, please make sure that you are using the platform.xml file they have provided.
If you are using their precompiled ANEs, probably, the path to iOS SDK is not correct. It should be upto the folder iPhoneOSx.y.sdk. -
Is there any mechanism for broadcast messages for every client?
Hi, all
I just wanna to develop such a kind of chatting program. So I just build the communication structure for that. I want to use UDP protocol to send and recieve messages. As we know about that protocol, it does not need connection between server and client, so some packages will be lost. I just used only one DatagramSocket to recieve and send any messages back and forth. And I implemented the client using multithread technique. The problem is that when multiple client sent messages to server, how could server broadcast the specific message to all clients. I am very headache about that. I just used Vector to store diffrent address and port. And when a meesage arrived, I will firstly make ajustment about whether the address and port had been stored, if not, I will add, otherwise I will ignore it. So I think it will be terrible that if thousands of clients connected to the server, how big Vector will be. So I want to know whether the Net package or DatagramSocket provided some kind of mechanism about broadcast messages for every interested client. Thanks. Here is my code below:
ChattingServer.java
* Created on 2005-4-16
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
// A server that echoes datagrams
import java.net.*;
import java.io.*;
import java.util.*;
* @author Kevin
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class ChattingServer {
static final int INPUT = 1066;
private byte[] buf = new byte[1000];
private DatagramPacket dp = new DatagramPacket(buf, buf.length);
private DatagramSocket socket;
private Vector addrVector, portVector;
public ChattingServer() {
try {
System.out.println("Chatting Server Started......");
socket = new DatagramSocket(INPUT);
System.out.println("The status is: " + socket.getBroadcast());
addrVector = new Vector();
portVector = new Vector();
socket.receive(dp);
addrVector.addElement(dp.getAddress());
portVector.addElement(new Integer(dp.getPort()));
System.out.println("The original size of addrVector: " + addrVector.size());
System.out.println("The original size of portVector: " + portVector.size());
String first = Transfer.toString(dp);
System.out.println(first);
System.out.println("The info: " + dp.getAddress() + ": " + dp.getPort());
DatagramPacket echo = Transfer.toDatagram(first, dp.getAddress(), dp.getPort());
socket.send(echo);
while(true) {
socket.receive(dp);
System.out.println("A message recieved and prepare for broadcasting.....");
for(int i = 0; i < addrVector.size(); i++){
if(!((((InetAddress)(addrVector.elementAt(i))).toString() == (dp.getAddress()).toString()) && (((Integer)portVector.elementAt(i)).toString() == (new Integer(dp.getPort())).toString()))) {
System.out.println("Before adding element");
System.out.println("(InetAddress)(addrVector.elementAt(i)).toString(): " + ((InetAddress)(addrVector.elementAt(i))).toString() + ", dp.getAddress().toString(): " + (dp.getAddress()).toString());
System.out.println("(Integer)portVector.elementAt(i).toString(): " + ((Integer)portVector.elementAt(i)).toString() + ", (new Integer(dp.getPort())).toString()" + (new Integer(dp.getPort())).toString());
addrVector.addElement(dp.getAddress());
portVector.addElement(new Integer(dp.getPort()));
String info = dp.getAddress() + ": " + dp.getPort();
String rcvd = info + ": " + Transfer.toString(dp);
System.out.println(rcvd);
System.out.println("The size of addrVector is: " + addrVector.size());
System.out.println("The size of portVector is: " + portVector.size());
String echoString = Transfer.toString(dp);
for(int i = 0; i < addrVector.size(); i++) {
InetAddress tempAddr = (InetAddress)addrVector.elementAt(i);
int tempPort = Integer.parseInt(portVector.elementAt(i).toString());
System.out.println("The port is: " + tempPort);
echo = Transfer.toDatagram(echoString, tempAddr, tempPort);
socket.send(echo);
} catch(SocketException e) {
System.err.println("Can't open socket");
System.exit(1);
} catch(IOException e) {
System.err.println("Communication error");
e.printStackTrace();
public static void main(String[] args) {
new ChattingServer();
ChattingClient.java
* Created on 2005-4-16
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
// Tests the ChattingServer by starting multiple clients, each of which sends datagrams.
import java.lang.Thread;
import java.net.*;
import java.io.*;
* @author Kevin
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
class Sender extends Thread {
private DatagramSocket s;
private InetAddress hostAddress;
public Sender(DatagramSocket s) {
this.s = s;
try {
hostAddress = InetAddress.getByName(null);
} catch(UnknownHostException e) {
System.err.println("Can not find host");
System.exit(1);
System.out.println(" Welcome ChattingDemo..........");
System.out.println("Please input your name: ");
public void run() {
try {
String strSent;
BufferedReader rd = new BufferedReader(new InputStreamReader(System.in));
String name = rd.readLine();
while(true) {
System.out.print(name + ": ");
strSent = rd.readLine();
if(strSent == "END") break;
s.send(Transfer.toDatagram(strSent, hostAddress, ChattingServer.INPUT));
sleep(100);
System.exit(1);
} catch(IOException e) {
} catch(InterruptedException e) {
public class ChattingClient extends Thread {
private static DatagramSocket s, srv;
private byte[] buf = new byte[1000];
private DatagramPacket dp = new DatagramPacket(buf, buf.length);
public ChattingClient(DatagramSocket s) {
this.s = s;
public void run() {
try {
while(true) {
s.receive(dp);
String rcvd = Transfer.toString(dp);
System.out.println(rcvd);
sleep(100);
} catch(IOException e) {
e.printStackTrace();
System.exit(1);
}catch(InterruptedException e) {
public static void main(String[] args) {
try {
srv = new DatagramSocket();
} catch(SocketException e) {
System.err.println("Can not open socket");
e.printStackTrace();
System.exit(1);
new ChattingClient(srv).start();
new Sender(srv).start();
}Hello Amir,
ACS used to tie the license to the MAC address of the machine but I believe Cisco removed that in version 5.1 or 5.2 as users were facing with issues if the MAC changed on a virtual machine.
Other Cisco products, such as the ASA, Call Manger, and even ISE are a lot more restrictive when it comes to licensing. However, Cisco in general has many products that are licensed on the "honor system" where you are responsible for reporting and paying for everything that you are using.
Also, I suppose Cisco could audit any companies out there and figure out what the company is using vs what it actually paid for :)
I hope this helps!
Thank you for rating helpful posts! -
Revision: 14727
Revision: 14727
Author: [email protected]
Date: 2010-03-12 06:36:58 -0800 (Fri, 12 Mar 2010)
Log Message:
Add missing selectors for air in MXFTEText.css. layoutDirection=rtl didn?\226?\128?\153t work in WindowedApplication if the width wasn?\226?\128?\153t explicitly set. WindowedApplication was using the internal _width variable in UIComponent rather than the setter so the mirroring transformation was being applied with a width of 0 ?\226?\128?\147 hence a blank screen.
QE notes:
Doc notes: None
Bugs: SDK-25829, SDK-25735
Reviewed By: Jason
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-25829
http://bugs.adobe.com/jira/browse/SDK-25735
Modified Paths:
flex/sdk/branches/4.x/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
flex/sdk/branches/4.x/frameworks/projects/spark/MXFTEText.cssSorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
<p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
<ul class="nav">
<li><a href="#">Green News</a></li>
<li><a href="#">Green Products</a></li>
<li><a href="#">Green Events</a></li>
<li><a href="#">Green Travel</a></li>
<li><a href="#">Green Tips</a></li>
</ul>
Maybe you are looking for
-
Why is there a problem with Itunes freezing up at least 1-2 times when using it?
It is kind of getting old but my Itunes player (does not matter which one as I update to the latest version) has this nasty habit of freezing whether I am trying to listen to the radio or my own library. It is now happening almost every time I use It
-
Help using repository variable in dashboard text
Hi, we have a dashboard section that shows current announcements regarding data issues, etc. This is just using a plain text object on the dashboard. I need to add the following to the top of the text: "Data loaded on xx/xx/xxxx". I've created a stat
-
FI-AA and the Automatic Creation of Equipment Master Records
Our client is currently on SAP R/3 4.7E and per SAP Notes 176056, 370884, 361520, releases above 4.6B should be able to automatically create an equipment resord master record from within FI-AA. Configuration shows that undaer FI-AA Master Data the i
-
Using BAPI_MATERIAL_AVAILABILITY for storage-location-level
Hello experts, To determine the ATP quantity Iu2019m using the function module BAPI_MATERIAL_AVAILABILITY. I need to get the ATP quantity on storage-location-level; for this the following parameters are set: - PLANT - MATERIAL - UNIT - CHECK_RULE - S
-
Camera profiles and Untwisted Adobe Camera Profiles
If memory serves me correctly, mention was made a while ago about the Recovery slider within LR - basically how bad it was. Um? At this time, again if memory serves me correctly, someone mentioned something about 'Untwisted Profiles'. Anyway, followi