Exiting from app pressing enter from keyboard

hi
i have this app where i use a class that extends FocusTraversalPolicy in order to have tabbed focus; so far so good, but what i want now is to implement what i said earlier: how to have the app closed getting the focus on my exit button but instead of clicking it just pressing enter?
thanks in advance

@camickr
thanks for the link!
i read it and tried (inside the constructor)
                KeyStroke enterKeyStroke = KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0, false);
                Action sair = new AbstractAction()
                    public void actionPerformed(ActionEvent e)
                        setVisible( false );
                getRootPane().getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW).put(enterKeyStroke, "Sair");
                getRootPane().getActionMap().put("Sair", sair);and works (with diferent LaF)
But that's not exactly what i intended, because if i press enter, the app exits (that's ok so far) but what i wanted was that the enter press would perform the action of each button.
In another words:
imagine i've a clear , a save and an exit button.
Where the focus is i want the enter key press to perform the respective action: cancel, save or exit.
In my actual case, independent of the position of focus, if i press enter the app exits.
I also tried this code here:
void cmdSair_actionPerformed(ActionEvent e) {but without success

Similar Messages

  • Every time i press enter, my keyboard keeps typing backslash even though i am not holding the backslash key

    Every time i press enter, my keyboard keeps typing backslash even though i am not holding the backslash key. Help.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Editable ALV - handling Enter key  when pressing enter on keyboard

    Hi folks.
    Now I have searched - and found a lot of threads - in this forum about my little problem.
    I'm using the <b>Function Module: REUSE_ALV_GRID_DISPLAY - NOT THE OO-version</b>!!!!!
    I have a editable list as result of finding some data. My problem is.
    When I change the value in one of the cells, and press the Enter key (not a click with the mouse on the Green button with the checkmark!) nothing happens!
    I have
        i_callback_pf_status_set  = 'SET_PF_STATUS'
        i_callback_user_command   = 'USER_COMMAND'
    And when I put a breakpoint in the USER_COMMAND form nothing happens - <b>ONLY IF I CLIKS WITH MY MOUSE ON THE Green button with the checkmark</b>!!
    Hope U have some idea!
    Best regards
    Carsten :o)

    Hi,
    Following the sample program for EDITABLE BLOCK ALV report.
    REPORT  YMS_EDITBLOCKALV.
    TABLES : rmmg1,MCHB, mkpf.
    DATA: BEGIN OF t_mseg OCCURS 0,
            zeile LIKE mseg-zeile,
            menge LIKE mseg-menge,
            meins LIKE mseg-meins,
            matnr LIKE mseg-matnr,
            werks LIKE mseg-werks,
            charg LIKE mseg-charg,
            bwart LIKE mseg-bwart,
    END OF t_mseg.
    DATA:BEGIN OF t_mchb OCCURS 0.
    INCLUDE STRUCTURE mchb.
    data flag type c.
    matnr LIKE mchb-matnr,
    charg LIKE mchb-charg,
    werks LIKE mchb-werks,
    clabs LIKE mchb-clabs,
    DATA END OF t_mchb.
    TYPE-POOLS slis.
    data: progname like sy-repid,
    fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    data tabindex type i.
    data wa_matnr LIKE mchb-matnr.
    progname = sy-repid.
    SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS s_docno FOR mkpf-mblnr OBLIGATORY.
    PARAMETERS p_docyr LIKE mkpf-mjahr OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b_b1.
    START-OF-SELECTION.
    SELECT zeile
    menge
    meins
    matnr
    werks
    charg
    bwart
    FROM mseg
    INTO TABLE t_mseg
    WHERE mblnr IN s_docno AND mjahr = p_docyr.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 1.
    fieldcattab-fieldname = 'ZEILE'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Item'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 2.
    fieldcattab-fieldname = 'MENGE'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Quantity'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 3.
    fieldcattab-fieldname = 'MEINS'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Unit'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 4.
    fieldcattab-fieldname = 'MATNR'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Material'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 5.
    fieldcattab-fieldname = 'WERKS'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Plant'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 6.
    fieldcattab-fieldname = 'CHARG'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Batch No'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 7.
    fieldcattab-fieldname = 'BWART'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Inventory'.
    fieldcattab-hotspot = 'X'.
    APPEND fieldcattab.
    end-of-selection.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = PROGNAME
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = fieldcattab[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS =
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT = fieldcattab
    IT_HYPERLINK =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    t_outtab = t_mseg
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
    slis_selfield.
    CASE r_ucomm.
    WHEN '&IC1'.
    tabindex = rs_selfield-tabindex.
    read table t_mseg INDEX tabindex.
    select * from mchb into table t_mchb where matnr = t_mseg-matnr.
    clear fieldcattab.
    CLEAR fieldcattab[].
    fieldcattab-col_pos = 1.
    fieldcattab-fieldname = 'FLAG'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Check Box'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    fieldcattab-checkbox = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 2.
    fieldcattab-fieldname = 'MATNR'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Material'.
    fieldcattab-emphasize = 'C1'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    fieldcattab-checkbox = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 3.
    fieldcattab-fieldname = 'CHARG'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Batch No'.
    fieldcattab-emphasize = 'C2'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 4.
    fieldcattab-fieldname = 'WERKS'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Plant'.
    fieldcattab-emphasize = 'C30'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 5.
    fieldcattab-fieldname = 'CLABS'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Stock'.
    fieldcattab-emphasize = 'C601'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = PROGNAME
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = FIELDCATTAB[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS =
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT =
    IT_HYPERLINK =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    t_outtab = t_mchb
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endcase.
    endform.
    FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
    slis_selfield.
    CASE r_ucomm.
    WHEN '&IC1'.
    IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
    CALL FUNCTION 'ZALV2'
    EXPORTING
    CTU = 'X'
    MODE = 'E'
    UPDATE = 'A'
    GROUP =
    USER =
    KEEP =
    HOLDDATE =
    NODATA = '/'
    MATNR_001 = '200-200'
    KZSEL_01_002 = 'X'
    IMPORTING
    SUBRC =
    TABLES
    MESSTAB =
    SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
    CALL TRANSACTION 'MM03' and skip first screen.
    ENDIF.
    ENDCASE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = progname
    i_callback_user_command = 'USERCOMMAND3'
    it_fieldcat = fieldcattab[]
    TABLES
    t_outtab = t_mchb
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    endcase.
    ENDFORM.
    Thanks,
    Sankar M

  • In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

    In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • Can`t exit from the app corner mode in windows phone 10 technical preview at Nokia Lumia 520

    After upgrading to windows phone 10, I just face several bugs as expected, including screen unlock bug. I just try app corner feature on my phone. That`s led to a big mistake. I can`t exit from the app corner mode. While pressing the power off
    button and swap right, nothing happens. (In lock screen, it doesn`t show that swap right to exist. I think this problem also related to locks screen bug.  Even I try  to remove the battery. But, still I struck at app corner. Please
    help me come out this problem!!!
    Thanks in advance
    Mohamed Usman
    www.neotech4u.weebly.com

    Very very disappointed. Sorry about windows phone. I have argued quit a lot with friends. Trying to convince them that WP are extremely good and nice to work with. Unfortunately they keep telling me about the poor apps of WP. Unfortunately I can now start seeing the problem. Guess what, I wasconsidering of buying my father a WP. Guess what. I will probably stick to android. Badly played about that. Farewell. Disappointed 7.8 WP customer from Athens Greece.

  • Carbage collection && Exiting from app

    Hi!
    I have done an app. I�m asking how can I quit from this app:
    public class RecordMidlet extends MIDlet {
        public void startApp() {
            Display.getDisplay(this).setCurrent(new RecordForm());
        public void pauseApp() {
        public void destroyApp(boolean unconditional) {
                  notifyDestroyed();
    }The recordform implements all the functionality etc. :
    else if(comm == exitCommand) {
      } What do I write when the exit button is pressed? I�ll have to call the notifydestroyed method etc? But How? The upper code part is from the form class.
    The other question is carbage collection? I call couple times in the Form -class System.gc() -method, but I think it doesn�t collect carbages and the app hangs because the lack of memory.
    I think right way is to call the System.gc() -method in my Midlet -class (RecordMidlet), but how?
    The RecordForm -class records video and sends some data to the server. after 10 video recording and sending some data to the server it hangs, because the lack of memory.
    I set all the arrays etc. used to null, and call the System.gc() -method, but it won�t work.
    Any hints or ideas anyone? The phone I�m using is Nokia 6630.

    I know I�ll have to call the destroyApp()-method, but how it can be done in RecordForm -class, where is defined the commandlistener and the exitCommand. In the RecordMidlet -class it would be easy just calling the destroyApp()-method.
    I just tried on my editor, and in the RecordMidlet -class, I wasn�t able to call the destroyApp() -method. I tried this.destroyApp(), super.destroyApp() etc. but wasn�t able to call the destroyApp() -method.
    The RecordForm extends form and implements commandListener.

  • After upgrade from 34 to 35, control click still opens new tab but new tab won't load upon selection. i have to click address and press enter or click go

    I've used Firefox for many years, I really like it and have been readily recommending it to others.
    However after finally upgrading to 35.0.1 from 34.x I now have a very annoying and time-consuming issue.
    So much so that I'm thinking of attempting a downgrade!
    I didn't really want to upgrade but Firefox kept bothering me and I inadvertently accepted. Is there a way to switch this upgrade reminder off?
    Anyway, previously I would Ctrl-click a link and it would open a new tab but not jump to it. It would remain unloaded until I clicked it. Then it would load as normal.
    After the upgrade, I Ctrl-click a link and it still opens a new unloaded tab. So far, so good. Now however, when I click the new unloaded tab, it just sits there and does nothing. I have to click the URL in the address bar and either press <Enter> or click the 'Go' arrow.
    I use this feature sometimes 100s of times a day so this is extremely annoying as it adds considerable time and extra clicks to each new link I click.
    I'm wondering if it could be a problem with one of my plugins. Can I temporarily disable them all at once to see if that's it?
    I will try disabling the tab related plugins.
    I've tried toggling 'Don't load tabs until selected' on the Tabs page from Tools menu, Options.
    Any help would be thoroughly appreciated as I would like to return to being a Firefox Fan

    It is unlikely this issue is to do with Firefox upgrading. Firefox 36 will come out any day soon you should then be on that rather than considering an outdated Firefox 34 which is now not secure, and not supported.
    * See don't [[Install an older version of Firefox]]
    You have not listed your plugins, and Yes you could try using Firefox's add-on manager to make sure they are all set as click to activate or even temporarily set as never activate.
    I am not familiar with the add-on
    * UnloadTab 0.24.7 https://addons.mozilla.org/en-US/firefox/addon/unloadtab/
    That certainly may be part of the problem try deactivating that with Firefox's addon manager. For all I know this may be the intended behaviour of that addon.
    Also troubleshoot the issue with Firefox's safe mode, remembering that does NOT disable plugins you will still need to do that manually.
    * [[Troubleshoot Firefox issues using Safe Mode]]
    Please post back with how you get on and what you have tried, Including upgrading to Firefox 36 when that is available.
    [https://www.mozilla.org/en-US/firefox/releases/ Release notes]
    * [https://www.mozilla.org/en-US/firefox/35.0.1/releasenotes/ Fx35.0.1 release notes]
    ** The pre release notes for Fx 36 [https://www.mozilla.org/en-US/firefox/36.0beta/releasenotes/ (beta)]
    ** Likely link to new version fx36 release notes https://www.mozilla.org/en-US/firefox/36.0/releasenotes/

  • Problem with entering integer numbers from keyboard

    I have written this simple code:
    import java.io.*;
    public class Simple{
         public static void main(String[] args)throws Exception{
              System.out.println("Enter two integer numbers: ");
              BufferedReader enter=new BufferedReader(new InputStreamReader(System.in));
                   int first=Integer.parseInt(enter.readLine());
                   int second=Integer.parseInt(enter.readLine());
              System.out.println("Result is: "+(first+second));
    and it works fine if I type first number, press Enter, then type
    second number and press Enter.
    But if I type in one line: 2 3 (with space between) I get run-time error:
    Exception in thread "main"...bla...bla at java.lang.Integer.parseInt(Integer.java)...
    I know that error is coming from Integer.parseInt(string) in my code, but I
    don't know how can I avoid it.
    In C that is rather simple scanf("%d %d",&first,&second), but in Java it's much more
    complicated.
    Do you have any suggestions how to solve this problem?

    store the user input in a string
    use a StringTokenizer st
    then
    while(st.hasNext())
    int first=Integer.parseInt(st.nextToken());
    but you should really catch a NumberFormatException
    walker

  • How to exit from Enter-Query mode

    Hi
    I am not being able to exit from the Enter-Query mode if the result set is not returned.
    I tried to exit using ABORT_QUERY, exit_form( as we used to do in earlier version) and CTRL+Q. Nothing seems to work and I have to kill the form
    This seems to be an easy topic, but I need your help.
    Thanks in advance
    Bijay

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bj ():
    Hi
    I am not being able to exit from the Enter-Query mode if the result set is not returned.
    I tried to exit using ABORT_QUERY, exit_form( as we used to do in earlier version) and CTRL+Q. Nothing seems to work and I have to kill the form
    This seems to be an easy topic, but I need your help.
    Thanks in advance
    Bijay<HR></BLOCKQUOTE>you maybe include a not null item,you can set the item's property
    not need .
    null

  • Invoking a command link's action from a javascript, on pressing enter key

    i have the foll java script function. on pressing enter within an input field i want a certain commandlink's action to be automatically performed:
    function checkKeycode() {
         alert("entered");
              var keycode;
              if (window.event) keycode = window.event.keyCode;
              //else if (e) keycode = e.which;
              if(keycode==13){               
                   alert("keycode: " + keycode);           
                   var x=document.getElementById("form10:link1");
                   alert("about to click");
                   x.click();
                   //document.forms[0].link1.click();               
                   //if(validate('form1:_system_username,form1:_system_password','form1:_id0,form1:_id1','2'))
                        //alert("about to submit page");
                        //submitPage();
         }This fn is being called from the input text as follows:
    <h:inputText styleClass="inputText" id="text1" size="32" onkeypress="checkKeycode();"></h:inputText>And the code containing the command link who's action i want to be called is:
    <h:commandLink styleClass="commandLink" id="link1"
                             action="#{pc_Test.doLink1Action1}">
                             <hx:graphicImageEx border="0" styleClass="graphicImageEx"
                                  id="imageEx1" url="../../images/search.gif"></hx:graphicImageEx>
                        </h:commandLink>
    The javascript is being entered as i get an alert saying that enter key was pressed. However it is not performing the action requried, saying that "null is null or not an object"
    could sumone please help????

    Hi
    From your javascript , it is known that this is only work in IE,
    And indeed it works fine, mybe there is another button which the default in your jsp
    Change your code like this:
    onkeypress="return checkKeycode();"
    and at end of your javascript return false when you call x.click
    Message was edited by:
    okoi80

  • I did this -- Windows 7 and Vista 1. Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. D

    When I sign out of FF and want to go back in, I have to go through Task Mgr each time by deleting FF and then signing back in. I followed these directions -- Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. Delete the file xpicleanup.dat. 6. Restart Firefox. --- but I could not find Mozilla Firefox under 'Program Files'.
    == This happened ==
    Every time Firefox opened
    == about a week ago

    Where did you find those instructions to delete the '''xpicleanup.dat''' file?

  • How to stop firefox from going to a URL your most is hovering over when you type in a URL and press enter.

    When you open a new tab and begin to type a url to visit, if your mouse is hovering over any of the suggested results when you press enter, instead of firefox going to the url you have typed, it goes to the url that the mouse was hovering over.
    Is there a way to disable this functionality as it is annoying when you are say, trying to access youtube or google, but then you goto a completely different page from your history because your mouse was hovering over a suggested result.

    @philipp:
    I restarted in safe mode with all add-ons disabled and the problem still persists. Apparently a friend also seems to have this problem.
    How to reproduce (to the best of my knowledge)
    1) click on url bar
    2) start typing part of a url which generates many results from history
    3) mouse over one of the results (usually the first as thats where the mouse is after clicking on the url bar)
    4) press enter with autofilled url in url bar
    What happens is say that i start typing "goo" for google.com, firefox will auto complete with http://google.com, but since my mouse is hovering over a historic google search result it opens what ever my mouse is hovering over even though the url bar says "http://google.com"

  • I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

    I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

    Try double clicking the Home button and then swipe the bottom row fully to to the right to get to the music control

  • Error when exiting from ANY JavaFX app. (any workaround?)

    I've had an ongoing problem when working with JavaFX, and even using applications created with it like SceneBuilder and FXExperience tools. As I reported in this bug: http://javafx-jira.kenai.com/browse/RT-27458 , any time I exit from any application that uses JavaFX, I get an error. My bug turned out to be a duplicate, and looking at the other report, it seems to be a result of the combination of the ATI-Radeon graphics card, Ubuntu, and JavaFX. It doesn't seem to matter whether the app is solely JavaFX, or embedded in Swing, whether it is installed as a native bundle or run directly from class files, or an executable jar. If it uses JavaFX and I run it, when I close it I get this error. It also doesn't matter whether I use jdk7 or an early-access build of jdk8.
    This is becoming increasingly irritating as I further explore the technology and begin trying to work with it, going beyond simply following tutorials and whatnot, because it means I frequently run my programs to see if they actually work, and am much more frequently using tools like SceneBuilder. It doesn't seem to matter whether I run things from the command line, start them from an IDE, or in the case of installed applications, run them through Ubuntu's Launcher or Dash, when I exit I get an error message and an error log shows up somewhere. Especially when testing an application I'm working on, these logs quickly clutter up my directories and become an annoyance.
    Does anyone have any suggestions or workarounds which might help avoid some of the annoyances from the problem? I have the ability to dual-boot Windows 7, and as the problem becomes increasingly annoying, have given some thought to doing my development there. However, I'm really not very comfortable in Windows, and it would involve making some pretty big changes to my workflow, so this isn't my favorite option.
    I imagine that using another distro like Linux Mint would probably continue to have the same issues, since I think it would be using the same drivers for the graphics.
    Changing computers is not currently an option for me. I'd love a Mac to develop on, but that's just not possible currently.
    If anyone has any ideas, suggestions, workaround or tips I would greatly appreciate them. Thanks in advance for your help.

    Okay. Do you have any third-party iTunes plug-ins/add-ons installed?
    (They can sometimes produce similar symptoms if they were written for an earlier version of iTunes, and they aren't liking a new version ... last time I can think of a major outbreak of add-on-related crashes-when-quitting was with the transition from iTunes versions 6.0.x to 7.0.x, though.)
    If so, the following document might be of some assistance:
    Troubleshooting issues with 3rd-party iTunes add-ons

  • Execute Data by Enter Query from keyboard

    Dear all seniors
    I want to execute data in my Froms with enter key query by pressing from key board
    when i press enter key it execute query

    El-Salamu Alikum We Rahmatu Allah We barakatu... ya Ghulam Yassen
    i think it's a good approach to mention ur forms version always cause the solution almost depends on that...
    Pls check...
    Oracle Terminal for Forms 10g
    Hope this helps...
    Regards,
    Amatu Allah

Maybe you are looking for

  • Lock error when starting wl70

    Hello, Sometimes when starting wl, we receive the following error: Starting WebLogic Server... <Jun 9, 2003 6:54:44 AM EDT> <Notice> <Management> <140005> <Loading configuration /d001/DEV/app/bea/user_projects/devdomain/./config.xml> <Jun 9, 2003 6:5

  • Data mapping in pdf forms

    I've created a simple PDF form and an interface for it. I've binded the context to a few text fields and everything seems to work as intended. The problem I'm having at the moment is that I would be requiring the short description of the data value,

  • Image from database blob column

    Hi all, Is it possible to show the image stored in data base column(blob type) in image component without using servlet.? ( I mean in a declarative way.) I saw lot of samples which all using servlet. I needed to know whether it is possible to show im

  • Sometimes when I scroll up and down, the screen font gets funky.

    Sometimes when I scroll down a page on a website, the screen font goes from being clear to blurry and kind of funky looking, like when you don't use Clear Type. Is there some setting I can change to prevent this from happening? With very small fonts,

  • I tried to install Firesheep and got an error stating Firesheep is not compatable with Firefox 7.0.1, is that true?

    is there anyway Firesheep will work with Firefox 7.0.1? The exact error message I recieved is below in quotes. "Firesheep could not be installed because it is not compatable with Firefox 7.0.1."