Expand all areas in item details as default

We open the item details and have to make changes in nearly every area (basic data, cost assignment, ship-to-address, source of supply). So we have to open each area one by one and every time the screen is refreshing. So we spend a long time for waiting! Is there a possibility to open all areas as default, a parameter or something like this?
Regards
Hubert

Hi,
There is no straight solution for it. but try this implementaion in BADI BBP_UI_CONTROL_BADI
Enable the necessary frames/subscreens Basic data.... SOS (whichever applicable) in BADI.
Make sure it is enabled.
or
Change the BHML page with necessary ok codes.
SAPLBBP_SC_UI_ITS 120
Scroll down to the service page to check the OK codes.
Just worth a try.
Good luck on this challenging requirement
Cheers, Renga
***Award points for usefull answers***

Similar Messages

  • Expand all folders in the detailed navigation by default on click of Role

    Hi All,
    I have a requirement on expand all the folders in the detailed navigation by defalut when we click a Role in the Fist level navigation.
    Please have a look about our requirement as mentioned below.
    ->Role1(First Level Navigation)
       ->Wokset1(Second Level)
           -> Folder1(Detailed Navigation entry Folder)
                  -> Folder2
                       Page1
                       Page2
                  ->Folder3
                       Page3
                       Page4
                  -> Folder4
                       Page5
                       Page6
    When the user clicks on Role1 then automatically all the folders in the detailed navigation should be expanded by default then user could see all the pages displayed in all folders. currently the functionality is collapsed all the folders by default in the detailed navigation then user has to expand the folders manually.
    Regading this issue, i had seen couple of threads on the same but getting confusion what is the exact solution for the solution.
    in those existing threads some people has mentioned that need to change code in the lightdetailnavigation.par or some other mentioned that it is not worked out even do the required changes in the code of light detail navigation part file. there is no clarity in the existing threads for getting  the exact solution . please let me know what are the properties needs to be changed at folder level or workset level to make sure all the folders should be expanded by default in the detailed navigation??
    Currently we are using portal 7.0 version.
    Any pointers in this regard would be the great help to us??
    Thanks in advance.
    Regards,
    PortalUser
    Edited by: PortalUser100 on Jan 22, 2011 10:15 AM

    Hi,
    To expand all the folder by default, we need to set the property of the detailed navigation tree.
    Open your framework page in the content administration.
    Check on the detailed navigation check box and click on the properties button.
    In the properties, set the value of initial state= OPEN .
    This will expand all the folders by default.
    Hope you understood.
    Regards
    Nishant

  • Is it possible to remove collapse all and expand all links in HGrid.

    Hi All,
    Is there any way to remove collapse all and expand all links which HGrid shows by default, the reason is when the user clicks on collapse all it will collapse to root node but my requirement is it should collapse untill 2 node level.
    Thanks
    Babu

    From the javadoc of OAHGridBean
    ======================
    void setExpandAllEnabled(boolean expandAllEnabled)
    Indicate whether the "Expand All" (and "Collapse All") links should be rendered for the HGridBean.
    Cheers,
    Ganesh

  • All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

    Hi All,
    On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
    below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
    What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
    Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
    I hope you can help
    Colin

    Hi Colin,
    As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
    Check things below:
    1. Go to site content and structure logs in site setting to check if there is correct information.
    2. Create a new site collection to check if there are items in Site Content and Structure.
    3. Switch another computer to check if it can work.
    If the issue still exists, I recommend you to post it in the O365 forum.
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SRM4 - Shopping Cart - Item Details - Expand Area title change

    Hello gurus
    could you point me in the right direction to change the title of the expand area in Shopping Cart  - Item Details: - Vendor Text and Internal Note ?
    Thank you very much
    Imrich

    found it on the screen
    SAPLBBP_SC_UI_ITS                       0120

  • Report Painter - Totals are different on face of report & line item details

    Hello,
    We have a report designed in report painter. Thye lIbrary table is GLPCT.
    When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
    Please can you suggest what coule be the probable reason for this anamoly.
    Thaks & Regards
    Shreenath

    Hi Sreenath,
    when you double-click on a line you are jumping to another report.
    The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
    The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
    For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
    Example:
    line 1: selection on account X and profit center A
    line 2: selection on account Y and profit center B
    line 3: sum of line 1 and line 2
    Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
    accounts: X, Y
    profit center: A, B
    the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
    It does not take into account the combined selections in my original report.

  • Fields in iView Item Details -create mode- are disabled

    Hello,
    we are using SAP MDM Standard iViews (Item Details) to create new data records.
    In some iViews on specific tables - I coudn't find any logic - the fields are grey and disabled instead of white and ready for data entry after pressing button "create". Does anyone has an idea for this? All parameters are set to enable=yes. The tabels are stadnard flat tables. The Roles in MDM are allowing read/write on the fields.
    Thanks a lot!
    Marc

    Hi Volker,
    I create(d) an iview of type Item Details on this table once -and it works! Then I created a similar iView and it didnt work - the fields are grey
    From what i understood from your problem statement is that you are creating two item details iView refering to the same table say Products.
    It means you are are trying to give provision to edit or create the same record through two separeate item detail iview.Or in other words when you select a single record from the result set iview it should display the details in both the item detail iview and also allow you to edit it.
    I am not sure whether this requirement as you are using the same fields in two independent iviews and expect them to work concurrently.
    I may be wrong but this could be one of the reason why when selecting the fields for modification in one item detail view it is showing greyed out in the other.
    Hope It Helped,
    Thanks & Regards
    Simona Pinto

  • How to set 'Expand All Conversations' as default in Mail.app

    Can anyone suggest a way that 'Expand All Conversations' can be set as the default layout. I realize how it can be implemented from the menubar command or via the message's triangle icon, but each time I close Mail, the app reverts to the closed layout. I would prefer to retain the expanded layout at all times (in the same way the user can tick off 'Organize All Conversations' and retain it across restarts).

    You can create a custom keyboard shortcut to expand all conversations easily.
    - Go to System Prefs
    - Select the Keyboard icon
    - Select the Keyboard Shortcuts tab
    - Click Application Shortcuts
    - Click +
    - Select Mail from the Applications drop down
    - Enter exact Menu item " Expand All Conversations" without quotes of course
    - then choose a shortcut you prefer
         - Suggest testing out the shortcut you prefer on Mail to make sure it is not currently used
    - Click Add
    - When you get back to your Apple Mail, you can now use the shortcut everytime you want to expand all conversations...
    Unfortunately, I couldn't find any other solution so far...

  • Expand All Mail Conversations by Default

    There are quite a few threads out there on this topic but none with any suitable response.  Has anyone figured out a terminal command that might force this, sort of like we do for forcing font size?  Its frustrating to have to keep going to view and selecting "Expand All Conversations" manually evertime you switch views. 
    Looking forward to a response. 

    That checkbox is checked, I have to go to View/Expand All Conversations about 20-30 times a day to expand all messages because it continues to collapse whenever I "switch views" meaning, going from one folder, to a keyword search, to a smart folder, etc.  It would be great to have some command line "defaults...xxxxx" that sets the "Expand All Conversations" default to on rather than persistent off - even if selected from the menu. 
    It would appear that I'm not the only one frustrated by this, many others seem to have the same thoughts so I'm hoping that someone in this community have figured out that simply setting a command line in Terminal sets the default to on with a bit flip. 
    leroydouglas wrote:
    Mail>preferences>Viewing
    This doesn't work for you?
    JimN wrote:
    evertime you switch views. 
    What does this mean?

  • Purchasing Groups not defaulting to all new line items

    Hi,
    We are on SRM 4.0. currently, we can only assign a user to one purchasing group.Now my problem is Purchasing Groups not defaulting to all new line items (when changed in default settings).If any one faced this problem help me out.
    regards,
    sobhan

    Sobhan,
    Depending on your material group, the purchaing group will be defaulted. According to the responsibility tab and SPRO Config define objects in the backend system, the purchaing group will default in your basic data of the shopping cart screen.
    Even though in your default settings you will assign a Purchaing group, the purchasing group will be defaulyed on the basis of the above two crietrias mentioned.
    Please assigbn points for usefull answer !!
    Sundeep

  • Ipadmini inbox maintains there are 907 items in inbox, but I have deleted all items. How do I get rid of the numbers?

    ipadmini inbox maintains there are 907 items in inbox, but I have deleted all items. How do I get rid of the numbers?

    You can't delete the All On My Mac as it is an automatic group to display all of the contacts that are stored "On My Mac." You can delete all of the contacts that are in the ON MY MAC section by selecting All ON My Mac and then selecting all contacts. Press delete and approve the deletion. Then, select each group under ON My Mac and delete those individually.
    Then, Make sure iCloud is set as the default account in the General Address Book Preferences.

  • How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them.

    How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them before updating.

    Thanks. This seems to have worked easily.

  • How to change the default text "There are no items to show in this view" in the visual webpart

    Hi,
    I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text. 
    I checked the forums here there are multiple ways are shown but no one is working for me.
    Kindly help me to change this text.
    Thanks in advanced.

    It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
    the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
    http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
    But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.  
    Mohamed Derhalli
    SharePoint Consultant
    Blog: SharePoint Thoughts
       Twitter:
    LinkedIn:
      

  • GR check  box in Item detail Tab in PO to beset as default .

    hello Gurus ,
    Need a help !!
    How can a GR check box made default selected / deselected  ....
    PO ---> Item details -
    > Delivery  Tab -
    > Goods Receipt check or uncheck ...(should be set as default )
    Any idea pl. let me know ...
    Regards,
    Anamal Kumar
    H`bad

    Hello,
    Goods receipt depends on your material type. E.g. for ROH  GR tick will be there so that you can do good recept for the same.and if there is no material master only description then it will come from account assignment category and item cateogry.
    For blanket PO, item category will be B so Gr tick will be deselected. Since for item category B invetory managment is not possible.
    Check the cutomizing setting for account assignment category and item category.
    Regards,
    Shailesh

  • Defaulting the Sotrage location for all the line items in my sales order

    Hi,
    I have a scenario to default the storage location automatically in my sales order for all the line items. It is not going to change for a particular sales org. Dist. channel & Division combination. Can you pls. suggest me a solution for this.
    Thanks
    Ghanesh.

    Hi,
       You can default the storage location by using the below user exit
    Storage location
    Auto determination of storage location as u2018XXXXu2019 for sales order
    Include - MV45AFZB
    Form - USEREXIT_SOURCE_DETERMINATION
    IF (VBAK-AUART = 'XXXX' and VBAK-VKORG = 'XXXX' and VBAK-VTWEG = 'XX').
    VBAP-LGORT   = 'ABCD'.
    Regards,
    Gopal.
    Edited by: Gopalakrishnan S on Feb 25, 2010 7:35 AM

Maybe you are looking for