GR check  box in Item detail Tab in PO to beset as default .

hello Gurus ,
Need a help !!
How can a GR check box made default selected / deselected  ....
PO ---> Item details -
> Delivery  Tab -
> Goods Receipt check or uncheck ...(should be set as default )
Any idea pl. let me know ...
Regards,
Anamal Kumar
H`bad

Hello,
Goods receipt depends on your material type. E.g. for ROH  GR tick will be there so that you can do good recept for the same.and if there is no material master only description then it will come from account assignment category and item cateogry.
For blanket PO, item category will be B so Gr tick will be deselected. Since for item category B invetory managment is not possible.
Check the cutomizing setting for account assignment category and item category.
Regards,
Shailesh

Similar Messages

  • PO/ S.Location and GR msg check box in 'delivery/invoice' tab of header dat

    Hi all,
    Under which case the below 2 fields are required to b filled while creating a PO apart from making them mandatory fieds in document type settings.
    1. GR msg check box in 'delivery/invoice' tab of header data
    2. Storage Location data in item details
    in me59n, system unable process p.req to PO becoz it is mandatory to fill these two fields.

    Hi,
    1. GR message check box issues message to the buyer after every the goods receipt against the PO.
    Message type has to be configured for this functionality.
    2. If you are managing stock of material at storage location level , then you will need to maintain this at PO item level.
    Regards,
    Maheshwari

  • "GR Non-Valuated" check box in Goods Recipt tab

    How "GR Non-Valuated" check box in Goods Recipt tab of production order gets activated.
    I have a ticket wherein the customer does not want this check mark to be checked but it is checked automatically
    Please help understand the logic behind it and advice to stop this from happenning.
    Thanks,
    Ganesh

    Dear,
    Production order settlement in case of sales order is derived based on the sales order account assignment defination, In this case it appears they have gone for Non-Valuated Sales order stock. Are you using the Make to Order production with Strategy 20 or 25 then it comes under the non-valuated customer order stock.
    Please refer this link,
    GR done as Non Valuated Goods Receipt
    Regards,
    R.Brahmankar

  • Transaction ME21N Screen layout Item Details TAB settings

    Hi,
    ME21N transaction some of item details TABS are invicible. Like "Delivery address tab" is invicible. I want to make it visible/changeble to enter address for ship to.
    Right now I am looking into SPRO on screen layout settings and transaction SHD0 for screen layout variant.
    But I could not able to activate/visible of this particular tab.
    Help needed to make "Item detail delivery address tab" visible/change.
    Thanks,
    Deepak.
    Edited by: KDeepak on Apr 12, 2010 2:29 PM

    Hi Deepak,
    The path is SPRO -- Materials Management- PurchasingPurchase order- Define screen layout at Document level-field selection -ME21N-Reference item data
    In field selection screen for ME21N i.e.maintain table T162 -Field selection groups .Under this on the tab of Reference data ,item you have to mainatin as an optional entry for Delivery Address.With this delivery address tab will be visible for you under ME21N trancsction.
    Regards,
    Nitin Amritkar

  • Info req -- in sales order, item detail tab

    hi all,
    In sales order (VA01), Item detail tab,
    1. what is the purpose of business transaction type field?
    2. if click on the field, it will show list. so, where to create the list?

    Hi
    The purpose of that you have to go thro F1 and understand
    The possible entries for that filed is defined in IMG activity T code OVE5
    IMG--->MATERIALS MANAGEMENT->PURCHASING>FOREIGN TRADE AND CUSTOMS>BASIC DATA FOR FOREIGN TRADE-->DEFINE BUSINESS TRANSACTION TYPES AND DEFAULT VALUES
    Regards
    Raja

  • Customer subscreen on the PO item detail tab ( ME_GUI_PO_CUST)

    I use the BADI  ME_GUI_PO_CUST added customer subscreen ( new TAB) on the PO item detail.  if PO order type is NB ,  the TAB can show both me23n and me22n . if  PO order type is UB  , the TAB can show ME23N , but can't show ME22N .    Please Help, thanks.

    Hi,
    In PBO Logic of whicehver screen is called we can check if sy-tcode = ME22N/23N and hide all the fields/make it display only as per requirement so that user sees an empty screen/display only fields in customer tab ....using
    loop at screen..
    if screen-name = 'XXX' .
    screen-invisible = 1.  for hiding
    screen-input = 0.    for display only
    modify screen .
    endloop.
    Hope it helps
    Regards
    Byju

  • Return Check Box in Item Category

    Dear Friends
    In Item Category Example REN and G2N Return check box is activated what is use and what it affects to sales document.
    Thanking You All
    Arun

    Dear Amitesh,
    Whatever you explained me that I know that so why I am asking this question My question is what it affect to sales document and Item Line of sales document. Without this any problem to system?
    Kindly Understand my need and give me solutions.
    Thanking You for effort
    Arun

  • Check box and items help

    if zero or one check box is checked then item (NO S)is shown
    if more than one check box is checked then items will show (show S)
    <cfparam name="variables.morethanone" default="0">
    <cfset count.morethanone= 0>
    <cfloop index="checkField"
    list="#form.1#,#form.2#,#form.3#,#form.4#,#form.5#">
    <cfif checkField EQ "on">
    <cfset count.morethanone= count.morethanone + 1 >
    </cfif>
    </cfloop>
    <cfif count.morethanone GT 1>
    <cfset variables.morethanone = "1">
    </cfif>
    item<cfif variables.morethanone>s</cfif>
    i wish to have the item show items:
    in a page before submit.
    when a ((no,0) or one ) checkbox is checked and submit then
    items will become item (s disapears)
    if more than one check box is checked then s will appear/show
    after submit button.
    the code i have does not show the s on the initial page
    (before submit)
    it show as
    please click one of the following item instead i need it to
    show: please click one of the following items
    then the logic i have just explained above.
    what do i do thanks.

    I'm not exactly sure what you want to do, but here's the code
    that shows "items" when more than 1 checkboxes are checked on the
    previous form page; otherwise, it shows "item":
    <html>
    <head>
    <title>Untitled</title>
    </head>
    <body>
    Target Page:
    <br><br>
    <cfparam name="Form.Checkbox_1" default="">
    <cfparam name="Form.Checkbox_2" default="">
    <cfparam name="Form.Checkbox_3" default="">
    <cfparam name="Form.Checkbox_4" default="">
    <cfparam name="Form.Checkbox_5" default="">
    <cfset count = 0>
    <cfloop index="checkField"
    list="#Form.Checkbox_1#,#Form.Checkbox_2#,#Form.Checkbox_3#,#Form.Checkbox_4#,#Form.Check box_5#">
    <cfif checkField EQ "on">
    <cfset count = count + 1 >
    </cfif>
    <cfif count GT 1>
    <cfbreak>
    </cfif>
    </cfloop>
    item<cfif count GT 1>s</cfif>
    </body>
    </html>

  • Issue in MIGO item detail tab Enhancement

    Hi,
    I have enhanced MIGO by adding a text tab in the item detail section which shows the PO texts as in ME23N
    'texts' tab.
    Now when the user executes tcode MIGO and enters the PO number for doing goods receipt
    the the text tab screen flashes before the material tab is displayed at the item level.
    The text tab screen is designed like the ME23N text tab with a tree control and editor.
    I searched SDN but could not find any related link for this issue.If there are any such issues answered
    please give me the link for the same.
    Thanks,
    R.Paul

    Hi,
    Did you use MB_MIGO_BADI?
    Regards,
    Arpan

  • CRMD_ORDER Item Details TAB one of line item setting date as 12/31/1899

    Hi Experts,
    We have 3 line item for order, we call it as main line, return line and replacement line item. When we select Return line item and go to Dates Tab it shows all the dates related to that.  Here Depot send the date via XML File and it is getting set as "Depot Received Date", But when some orders get cancelled as depot dosent received that order they send blank date in XML File, but it save the date as "12/31/1899 16:00" . I am not able to get how it is getting set.
    Please help me regarding this, Where should i check for this?
    Regards,
    Poonam

    Hi,
    This is unfortunately not possible with standards but you may try using Badi ME_PROCESS_PO_CUST => PROCESS_ACCOUNT.
    Regards

  • Why is it when I select my personal preferences/user/login items, that when i select the check box for items to NOT pop up on my dock when i restart and start my macbook air 11 inch that they still continue to?

    why is it that every time i start up my macbook air and when i restart it, that the new office with word and those three other apps constantly pop up? even though i went to personal preferences/users/login items, and selected the box that clearly says "items to NOT be brought up when logging in" ?

    If you don't want to start Office automatically when your Mac starts, see > http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/how-do-i-prev ent-microsoft-office-2011-word-from/dd5b8b17-8397-4e7c-b635-79b9c976c4ab?msgId=f 00ac42a-e4fe-43aa-83d7-16ccd35a0d8a
    Also, on System Preferences > Users & Groups > Login Items, select all items related to Office and press - button to delete them

  • Enabling Check boxes in Payment Porcessing tab

    Hi,
    We have a requirement to permanently check the options
    1) Stop Process for Review After Scheduled Payment Selection
    2) Stop Process for Review After Creation of Proposed Payments
    We have achived by extending the the controller of the page,
    But when we create the payment processing with the above changes they are not getting saved in the DB.
    If anyone has faced this issue earlier please share the resolution.
    Thanks,
    Jana

    Now comes the important part. I create actionhandlers for event "onToggle" of the checkboxes. i have eventhandler ONTOGGLE_CHECK1 for the 1st checkbox & eventhandler ONTOGGLE_CHECK2 for the 2nd checkbox.
    Its the coding within these eventhandlers that achieves your desired functionality.
    Coding in ONACTIONONTOGGLE_CHECK1:
    method ONACTIONONTOGGLE_CHECK1 .
      data: lr_element type ref to if_wd_context_element,
            wd_node type ref to if_wd_context_node,
            lv_value type abap_bool,
            lv_index type i value 0.
    *** Obtain the desired context element
      lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
    *** Fetch info about whether the checkbox is getting checked or unchecked
      lr_element->get_attribute( exporting name  = 'CHECK1'
                                 importing value = lv_value ).
    *** Fetch info about the row in which the checkbox has been toggled
      lv_index = lr_element->get_index( ).
    *** Use the index & context element reference obtained to toggle the editability of the 2nd checkbox
      wd_node = wd_context->get_child_node( name = 'SFLIGHT' ).
      if lv_value = ''.
        wd_node->set_attribute( exporting index = lv_index
                                          name  = 'READONLY2'
                                          value = '' ).
      else.
        wd_node->set_attribute( exporting index = lv_index
                                          name  = 'READONLY2'
                                          value = 'X' ).
      endif.
    endmethod.

  • To check the Free item check box in PO number

    Hi All,
    In the Purchase Order at line item level we have the check box Free item to make Material qty as 0.
    Here my requirement is, to check the check box automatically when the order is created from ME58 transaction for particular vendor. When i checked the fields its showing UMSON but no where its storing the value in the database.
    Please suggest me any user exit or BADI for checking this check box by defualt. Please let me know if any table which holds this value.
    Thanks in advance..
    Regards,
    Sreekala

    hi,
    you can find the chnages made by selecting the condition type and going for the header menu environment--->Header changes.
    this will show the changes made at the header level.
    Regards,
    velu

  • Can't remove known password (v11); no Protection option under Tools, no check boxes in Security tabs

    Hello,
    I am unable to remove a known password on a document (using version 11.0.3 currently, but also on older versions).  I have no "Protection" option under Tools and I see no "Remove Security" check boxes (or any check boxes) in the Security tabs.  Any help would be greatly appreciated...thank you!

    That's the reason, but it isn't new. No version of Reader has ever been able to change security settings. I'm guessing you used to have a copy of Adobe Acrobat (which looks similar but can do more).

  • SRM : Custom Tab in RFx Item Details

    Hi ,
    I have a requirement to add a custom tab to the Item Details Tab of the RFx which has some custom Input fields and Checkboxes.
    For this i have created a Custom Tab in component /sapsrm/wdc_dofc_rfq_i_d1 through enhancement and used a separate z component to display the fields in custom tab. (declared zcomponent as used component in  /sapsrm/wdc_dofc_rfq_i_d1).
    I have instantiated my component usage in different methods of main component where other standard tabs were instantiated.
    As per the settings I am able to display the custom tab when i run the application but when i toggle the tabs it is giving some errors.
    Can anybody pls let me know some of the key points which I need to take care while adding the custom tab. How can I handle the standard SAVE and Edit Buttons in my components and also the processes which occur when I navigate from one tab to another???

    Hi Kartic,
    My requirements was a little bit different from yours...
    For CTR my Z component is only for display data, so its not necessary to save any data.
    For SC I had a table with some data and when I select a line is necessary to push a button to assign some values to the fields price, quantity, etc (standard fields)
    The solution for the SC was a bit difficult. I haven't access to that system now and i don't remember all the details.
    I'll try to explain to you what I did:
    - Create an event as interface in your Z component, this event should be triggered when the user push somo button in your view.
    - Create a method as event handler for this event in the standard component
    - For update the standard fields you need to use the method:
          wd_this->MO_DODM_RFQ_I_D1->/SAPSRM/IF_CLL_MAPPER~UPDATE( ).
    - I needed to add an enhancement point in that method and pass the data with IMPORT/EXPORT TO/FROM MEMORY.
    - For save the data I used the methods get_item_detail and update_item for the class /SAPSRM/IF_PDO_BO_* and the method submit_update for the class /SAPSRM/IF_PDO_BASE.
    You need to investigate these classes, you can copy and use some standard code to do it.
    I don't know if this help you and if exits other easiest way to do it. sorry.
    Best Regards,

Maybe you are looking for