Expand all not working for me

I have no clue on this and it sucks. Can anybody tell me why
my expandAll() call does not work. It does not expand the nodes.
Here is my code. The ADG is created in actionscript and then
grouping is applied to create hierarchical data. The last three
lines of the following code are where I call expandAll... after
validateNow too.
[CODE]var oneColumn:AdvancedDataGridColumn = new
AdvancedDataGridColumn("FRONTS: ("+firstsFronts.length+")");
var twoColumn:AdvancedDataGridColumn = new
AdvancedDataGridColumn("#");
var threeColumn:AdvancedDataGridColumn = new
AdvancedDataGridColumn("%");
oneColumn.width = 120;
twoColumn.width = 35;
threeColumn.width = 45;
oneColumn.sortable = false;
twoColumn.sortable = false;
threeColumn.sortable = false;
oneColumn.dataField = "FRONT";
twoColumn.dataField = "theCount";
threeColumn.dataField = "thePercentage";
//twoColumn.width = 20;
indPersonnelDataGridFronts.columns =
[oneColumn,twoColumn,threeColumn];
var groupingColl:GroupingCollection = new
GroupingCollection();
var groupingGroup:Grouping = new Grouping();
groupingColl.source = firstsFronts;
var myFieldGroup:GroupingField = new GroupingField("FRONT");
groupingGroup.fields = [myFieldGroup];
groupingColl.grouping = groupingGroup;
var sr:SummaryRow = new SummaryRow();
var sf:SummaryField = new SummaryField();
sf.dataField = "FRONT";
sf.operation = "COUNT";
sf.label = "theCount";
sr.fields = [sf];
sr.summaryPlacement = "group";
//myFieldGroup.summaries = [sr];
var srP:SummaryRow = new SummaryRow();
var sfP:SummaryField = new SummaryField();
sfP.dataField = "FRONT";
sfP.summaryFunction = calcPercentage;
sfP.operation = "COUNT";
sfP.label = "thePercentage";
srP.fields = [sfP];
srP.summaryPlacement = "group";
myFieldGroup.summaries = [sr, srP];
groupingColl.refresh();
indPersonnelDataGridFronts.dataProvider = groupingColl;
indPersonnelDataGridFronts.validateNow();
indPersonnelDataGridFronts.expandAll();[/CODE]

Thank You Barbara. I knew it was operator error.
David
On Fri, Oct 10, 2014 at 6:10 PM, Barbara B. <[email protected]>

Similar Messages

'Select ALL' not working for WD ABAP ALV

Hi all,
I have a web dynpro application with a tab strip with 9 tabs. Each tab has an ALV embedded in it. Each ALV is mapped to the same node in component controller. When the application is executed 'Select ALL' works for first ALV on the first tab. However if i select a different tab i get the select all option on the left hand corner but it does nothing when chosen.
I also tried creating custom button on ALV toolbar for this functinality. Here i am looping over all elements of the node (bound to ALV) and using method set_selected( abap_true ) ( method of if_wd_context_element ). This also works for first ALV on the
first tab. However again get the same issue if i choose any other tab.
Node cardinality : 0.... n
Node selection : 0.....n
ALV selection mode set to MULTI using method SET_SELECTION_MODE( CL_WD_TABLE=>E_SELECTION_MODE-MULTI ) of cofig class cl_salv_wd_config_table.
All your inputs/suggestions to resolve this issue will be greatly appreciated.
Thanks,
Vivek Priyadarshi

Hi Aditya,
Thanks for your reply. I am using 9 comp. usage of SALV_WD_TABLE to display 9 alv and all are mapped to the same comp. controller context node. The context node has the master structure with all fields, based on the chosen tab i am populating this context node with records and setting config model for ALV accordingly.
I tried your trick, clicked on select all on first ALV (all records chosen, works correctly here) then chose the second tab on tabstrip, however records in the new (second) ALV were not selected. When i clicked 'Select all' it did nothing, no records were chosen ( original issue ).
Did you invalidate the common node when you navigate between tabs?In my case i am populating this node with new data every time i navigate between tabs.
One new thing i noticed. On the first tab i am able to select individual rows by clicking on the row selection buttons on the left edge of every row. However when i go the second tab clicking on row selection button it does not get selected, only way to select a row in this case is by doing CLTR+click, something doesn't feel right about this application.
I am going to create a new context node to check if sharing a common context node is causin this issue.
-Vivek

Jtree expand all not working

I have a very large jtree, that at it second level gets loaded from a JDOm file.
The problem is I am having a problem expanding all the nodes under a
particular node. I need an expandAll method. Nothing I have tried has
expanded beyond the child level.
After a few permutations my code right now is
public void expandAll(DefaultMutableTreeNode node)
Enumeration list = node.breadthFirstenumeraion();
while (list.hasMoreElements())
TreePath treePath = new
TreePath(((DefaultMutableTreeNode)list.nextElement()).getPath()))
tree_m.expandPath(treePath);
Am i missing something about expandPath?
I even use the code from JTree example to the reload the model.
But it still only shows the nodes children, not the children's children....etc.

Hi!
You can try these methods where treeRoot is the root node of the tree:
* Collapses the function group tree.
public void collapseAll() {
for (int i = treeRoot.getChildCount(); i > 0; i--) {
tree.collapseRow(i);
* Collapses the function group tree.
public void expandAll() {
for (int i = treeRoot.getChildCount(); i > 0; i--) {
tree.expandRow(i);
/Malin

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

OS X 10.6.6-gestures for pinch to zoom or expand do not work.

Just installed Firefox 4 RC 1 and noticed that the pinch to open or close (zoom/expand) do not work. I can use other gestures (like swiping three fingers to move back or forward, but no luck with the pinch to zoom or expand. Keyboard shortcuts for this function work fine (command +/-).

Funcionó para mi
It worked for me

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

TS3219 I have an ipad 3 that has wifi and for some reason my youtube, facebook, and app store app are all not working. How do i fix this?!!!

I have an ipad 3 that has wifi and for some reason my youtube, facebook, and app store app are all not working. How do i fix this?!!!

Hey there FlamingTurd!
If you are having issues connecting to the App Store on your phone, there is an article here that can help you troubleshoot this issue a little further:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
We also have an article that deals with troubleshooting apps you have downloaded from the App Store and installed on your computer. That article can be found here:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Finally, if neither of those articles resolve the issue, you may need to restore your iPad:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Export to powerpoint not working for certain views

Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. Thomas

Hi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

Expand all not working for me

Similar Messages

Maybe you are looking for