Expanded Tables Mode Missing

Where did Expanded Tables Mode go? This is a necessary feature for those of us that are required to support older versions of email programs that don't properly support div tags. Also, when I need to analyze older websites or emails I use the Expanded Tables mode as an analytical tool.

Yes, feature deprecation is inevitable as the web and software evolves. I've always accepted that. I was thinking more about the timing. Sometimes Adobe gets it wrong. 12.1 is a prime example.
Equally unfortunate is the fact that the first ever Cloud-only update for DW has included the removal of features with no prior warning.
We're scratching our heads and left to our own devices to explore the post-update feature set via trial-and-error in the forums.
David_Powers wrote:
However, it does raise a question for CC subscribers. Let's say a feature that's important to you is removed from a major release (CS7 or CS8). Copies of the previous version are removed from the Adobe store as soon as a new one is released. It seems a reasonable assumption that the same will happen with the Creative Cloud. As a subscriber, you don't have a perpetual licence of the old version to roll back to.
Agreed.
I'd like to think that Adobe thought this scenario through when they were putting together the business model and policies for the Cloud.
It's becoming increasingly clear that that is not the case. It's policy on the run in some cases, this one included.
The only thing I've read online anywhere close to addressing this is that they give you up to 12 months to upgrade to the next version before you're "forced" to. But I think most people will upgrade the same day that the upgrade is released so I don't see this working in practice to address the scenario you've described.
Without prior warning, everyone will assume that an upgrade means new or enhanced features - not removal.

Similar Messages

SQL Developer hangs when expanding table node

Hello All,
One of my schemas has 3035 tables. When I expand the "Other Users" node, then the schema owner, then expand "Tables", SQL Developer hangs. I have allowed it to run (as it indicates it is working) for 45 minutes, but it never returns.
I have one user with nearly the same behavior, but theirs returns after waiting 5 minutes.
Any ideas?
About
Oracle SQL Developer 1.5.1
Version 1.5.1
Build MAIN-5440
Copyright © 2005,2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.22.49.35
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.54.40
Version
Component     Version
=========     =======
Java(TM) Platform     1.5.0_06
Oracle IDE     1.5.1.54.40
Versioning Support     1.5.1.54.40
Properties
Name     Value
====     =====
apple.laf.useScreenMenuBar     true
awt.toolkit     sun.awt.windows.WToolkit
class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level     CONFIG
class.transfer     delegate
com.apple.macos.smallTabs     true
com.apple.mrj.application.apple.menu.about.name     "SQL_Developer"
com.apple.mrj.application.growbox.intrudes     false
file.encoding     Cp1252
file.encoding.pkg     sun.io
file.separator     \
http.agent     Mozilla/5.0 (Java 1.5.0_06; Windows XP 5.1 x86; en_US) ICEbrowser/v6_1_3
ice.browser.forcegc     false
ice.pilots.html4.ignoreNonGenericFonts     true
ice.pilots.html4.tileOptThreshold     0
ide.AssertTracingDisabled     true
ide.bootstrap.start     624463503772965
ide.build     MAIN-5440
ide.conf     C:\oracle\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname     C:\oracle\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild     false
ide.devbuild     false
ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun     false
ide.java.minversion     1.5.0
ide.launcherProcessId     66660
ide.main.class     oracle.ide.boot.IdeLauncher
ide.patches.dir     ide/lib/patches
ide.pref.dir     C:\Documents and Settings\ckell\Application Data\SQL Developer
ide.pref.dir.base     C:\Documents and Settings\ckell\Application Data
ide.product     oracle.sqldeveloper
ide.shell.enableFileTypeAssociation     C:\oracle\sqldeveloper\sqldeveloper.exe
ide.splash.screen     splash.gif
ide.startingArg0     C:\oracle\sqldeveloper\sqldeveloper.exe
ide.startingcwd     C:\Oracle\sqlDeveloper
ide.user.dir     C:\Documents and Settings\ckell\Application Data\SQL Developer
ide.user.dir.var     IDE_USER_DIR
ide.work.dir     q:\\SQL Developer
ide.work.dir.base     q:\
java.awt.graphicsenv     sun.awt.Win32GraphicsEnvironment
java.awt.printerjob     sun.awt.windows.WPrinterJob
java.class.path     ..\..\ide\lib\ide-boot.jar
java.class.version     49.0
java.endorsed.dirs     C:\oracle\sqldeveloper\jdk\jre\lib\endorsed
java.ext.dirs     C:\oracle\sqldeveloper\jdk\jre\lib\ext
java.home     C:\oracle\sqldeveloper\jdk\jre
java.io.tmpdir     c:\temp\
java.library.path     C:\oracle\sqldeveloper;.;C:\WINDOWS\system32;C:\WINDOWS;C:\oracle\DevSuite\bin;C:\oracle\DevSuite\jdk\jre\bin\classic;C:\oracle\DevSuite\jdk\jre\bin;C:\oracle\DevSuite\jdk\jre\bin\client;C:\oracle\DevSuite\jlib;C:\oracle\DevSuite\jre\1.4.2\bin\client;C:\oracle\DevSuite\jre\1.4.2\bin;C:\Program Files\Java\jre1.6.0_03;C:\oracle\Client10g\bin;c:\oracle\10g\jdk\jre\bin\classic;c:\oracle\10g\jdk\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\Novell\ZENworks\;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Diskeeper Corporation\Diskeeper\;C:\Program Files\IDM Computer Solutions\UltraEdit-32;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\IDM Computer Solutions\UltraEdit-32\;C:\Program Files\CollabNet Subversion Server
java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name     Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version     1.5.0_06-b05
java.specification.name     Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.5
java.util.logging.config.file     logging.conf
java.vendor     Sun Microsystems Inc.
java.vendor.url     http://java.sun.com/
java.vendor.url.bug     http://java.sun.com/cgi-bin/bugreport.cgi
java.version     1.5.0_06
java.vm.info     mixed mode
java.vm.name     Java HotSpot(TM) Client VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor     Sun Microsystems Inc.
java.vm.version     1.5.0_06-b05
jdbc.library     /C:/oracle/sqldeveloper/jdbc/lib/ojdbc5.jar
line.separator     \r\n
oracle.home     C:\oracle\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version     9.0.4
orai18n.library     /C:/oracle/sqldeveloper/jlib/orai18n.jar
os.arch     x86
os.name     Windows XP
os.version     5.1
path.separator     ;
reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model     32
sun.boot.class.path     C:\oracle\sqldeveloper\jdk\jre\lib\rt.jar;C:\oracle\sqldeveloper\jdk\jre\lib\i18n.jar;C:\oracle\sqldeveloper\jdk\jre\lib\sunrsasign.jar;C:\oracle\sqldeveloper\jdk\jre\lib\jsse.jar;C:\oracle\sqldeveloper\jdk\jre\lib\jce.jar;C:\oracle\sqldeveloper\jdk\jre\lib\charsets.jar;C:\oracle\sqldeveloper\jdk\jre\classes
sun.boot.library.path     C:\oracle\sqldeveloper\jdk\jre\bin
sun.cpu.endian     little
sun.cpu.isalist
sun.desktop     windows
sun.io.unicode.encoding     UnicodeLittle
sun.java2d.ddoffscreen     false
sun.jnu.encoding     Cp1252
sun.management.compiler     HotSpot Client Compiler
sun.os.patch.level     Service Pack 2
user.country     US
user.dir     C:\oracle\sqldeveloper\sqldeveloper\bin
user.home     C:\Documents and Settings\ckell
user.language     en
user.name     ckell
user.timezone     America/New_York
user.variant
windows.shell.font.languages
Extensions
Name     Identifier     Version     Status
====     ==========     =======     ======
Check For Updates     oracle.ide.webupdate     11.1.1.0.22.49.35     Loaded
Code Editor     oracle.ide.ceditor     11.1.1.0.22.49.35     Loaded
Database Connection Support     oracle.jdeveloper.db.connection     11.1.1.0.22.49.35     Loaded
Database Object Explorers     oracle.ide.db.explorer     11.1.1.0.22.49.35     Loaded
Database UI     oracle.ide.db     11.1.1.0.22.49.35     Loaded
Diff/Merge     oracle.ide.diffmerge     11.1.1.0.22.49.35     Loaded
Extended IDE Platform     oracle.javacore     11.1.1.0.22.49.35     Loaded
External Tools     oracle.ide.externaltools     11.1.1.0.22.49.35     Loaded
Feedback     oracle.ide.feedback     11.1.1.0.22.49.35     Loaded
File Support     oracle.ide.files     11.1.1.0.22.49.35     Loaded
File System Navigator     oracle.sqldeveloper.filenavigator     11.1.1.53.38     Loaded
Help System     oracle.ide.help     11.1.1.0.22.49.35     Loaded
History Support     oracle.jdeveloper.history     11.1.1.0.22.49.35     Loaded
Import/Export Support     oracle.ide.importexport     11.1.1.0.22.49.35     Loaded
Log Window     oracle.ide.log     11.1.1.0.22.49.35     Loaded
Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.0.22.49.35     Loaded
Navigator     oracle.ide.navigator     11.1.1.0.22.49.35     Loaded
Object Gallery     oracle.ide.gallery     11.1.1.0.22.49.35     Loaded
Object Viewer     oracle.sqldeveloper.oviewer     11.1.1.54.40     Loaded
Oracle IDE     oracle.ide     11.1.1.0.22.49.35     Loaded
Oracle Microsoft Access Browser     oracle.sqldeveloper.thirdparty.access     11.1.1.54.40     Loaded
Oracle Migration Workbench     oracle.sqldeveloper.migration     11.1.1.54.40     Loaded
Oracle Migration Workbench - MS Access     oracle.sqldeveloper.migration.msaccess     11.1.1.53.38     Loaded
Oracle Migration Workbench - MySQL     oracle.sqldeveloper.migration.mysql5     11.1.1.53.38     Loaded
Oracle Migration Workbench - SQLServer     oracle.sqldeveloper.migration.sqlserver2005     11.1.1.53.38     Loaded
Oracle Migration Workbench - Translation Core     oracle.sqldeveloper.migration.translation.core     11.1.1.54.44     Loaded
Oracle Migration Workbench - Translation MS Access     oracle.sqldeveloper.migration.translation.msaccess     11.1.1.54.40     Loaded
Oracle Migration Workbench - Translation MS SQL Server     oracle.sqldeveloper.migration.translation.sqlserver     11.1.1.54.40     Loaded
Oracle Migration Workbench - Translation MySQL     oracle.sqldeveloper.migration.translation.mysql     11.1.1.54.40     Loaded
Oracle Migration Workbench - Translation Sybase     oracle.sqldeveloper.migration.translation.sybase     11.1.1.54.44     Loaded
Oracle Migration Workbench - Translation UI     oracle.sqldeveloper.migration.translation.gui     11.1.1.54.40     Loaded
Oracle MySQL Browser     oracle.sqldeveloper.thirdparty.mysql     11.1.1.54.40     Loaded
Oracle SQL Developer     oracle.sqldeveloper     11.1.1.54.40     Loaded
Oracle SQL Developer Extras     oracle.sqldeveloper.extras     11.1.1.54.40     Loaded
Oracle SQL Developer Reports     oracle.sqldeveloper.report     11.1.1.54.40     Loaded
Oracle SQL Developer SearchBar     oracle.sqldeveloper.searchbar     11.1.1.54.40     Loaded
Oracle SQL Developer TimesTen     oracle.sqldeveloper.timesten     1.5.1.1.2     Loaded
Oracle SQL Server Browser     oracle.sqldeveloper.thirdparty.sqlserver     11.1.1.54.40     Loaded
Oracle Sybase Browser     oracle.sqldeveloper.thirdparty.sybase     1.2.1.54.40     Loaded
Oracle XML Schema Support     oracle.sqldeveloper.xmlschema     11.1.1.54.40     Loaded
PROBE Debugger     oracle.jdeveloper.db.debug.probe     11.1.1.0.22.49.35     Loaded
Peek     oracle.ide.peek     1.0     Loaded
Replace With     oracle.ide.replace     11.1.1.0.22.49.35     Loaded
Runner     oracle.ide.runner     11.1.1.0.22.49.35     Loaded
SQL Worksheet Window     oracle.sqldeveloper.sqlworksheet     11.1.1.54.40     Loaded
Search Bar     oracle.ide.searchbar     11.1.1.0.0     Loaded
Snippet Window     oracle.sqldeveloper.snippet     11.1.1.54.40     Loaded
Sybase 12     oracle.sqldeveloper.migration.sybase12     11.1.1.53.38     Loaded
Sybase 15     oracle.sqldeveloper.migration.sybase15     11.1.1.53.38     Loaded
Tuning     oracle.sqldeveloper.tuning     11.1.1.54.40     Loaded
VHV     oracle.ide.vhv     11.1.1.0.22.49.35     Loaded
Versioning Support     oracle.jdeveloper.vcs     11.1.1.0.22.49.35     Loaded
Versioning Support for CVS     oracle.jdeveloper.cvs     11.1.1.0.22.49.35     Disabled by user
Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.0.22.49.35     Loaded
Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.0.22.49.35     Loaded
oracle.ide.dependency     oracle.ide.dependency     11.1.1.0.22.49.35     Loaded
oracle.ide.indexing     oracle.ide.indexing     11.1.1.0.22.49.35     Loaded

hi...
Same problem, but as many tables as Chris.
Pat
CVS Version     Internal to Oracle SQL Developer (client-only)
Java(TM) Platform     1.5.0_06
Oracle IDE     1.5.1.54.40
Versioning Support     1.5.1.54.40
here is the dump
Full thread dump Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode):
"ProgressBarThread" prio=6 tid=0x04665e20 nid=0x2ac8 runnable [0x079af000..0x079
af9e8]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Packet.java:239)
at oracle.net.ns.DataPacket.receive(DataPacket.java:92)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:172)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:117)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:92)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:77)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1023)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:999)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:584)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.
java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForDescribe(T4CCallabl
eStatement.java:782)
at oracle.jdbc.driver.T4CCallableStatement.executeMaybeDescribe(T4CCalla
bleStatement.java:857)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:1186)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePrep
aredStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePrepare
dStatement.java:3425)
- locked <0x11eaa750> (a oracle.jdbc.driver.T4CConnection)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(Oracle
PreparedStatementWrapper.java:1202)
at oracle.dbtools.db.DBUtil.executeOracleQuery(DBUtil.java:512)
at oracle.dbtools.db.DBUtil.executeQuery(DBUtil.java:540)
at oracle.dbtools.raptor.navigator.ObjectQueryInstance.executeQuery(Obje
ctQueryInstance.java:76)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.getChildren(Xml
FolderInstance.java:122)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.listChildren(Xm
lFolderInstance.java:67)
at oracle.dbtools.raptor.navigator.ObjectFilter$1Loader.doWork(ObjectFil
ter.java:147)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:161)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:615)
at java.lang.Thread.run(Thread.java:595)
"TextBufferScavenger" prio=6 tid=0x03a86620 nid=0x2ac4 in Object.wait() [0x078af
000..0x078afa68]
at java.lang.Object.wait(Native Method)
- waiting on <0x11f73798> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x11f73798> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(Tex
tNode.java:1886)
"pool-1-thread-1" prio=6 tid=0x04a1eee8 nid=0x29f8 waiting on condition [0x071af
000..0x071afa68]
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:118)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject
.await(AbstractQueuedSynchronizer.java:1767)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.jav
a:359)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.ja
va:470)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:674)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=6 tid=0x039b5878 nid=0x29f4 in Object.wait() [0x
070af000..0x070afae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x11971f98> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x11971f98> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-2" prio=6 tid=0x04a21540 nid=0x29f0 in Object.wait() [0x06faf000..0x06faf
b68]
at java.lang.Object.wait(Native Method)
- waiting on <0x11972010> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x11972010> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Native Directory Watcher" prio=2 tid=0x047c64c8 nid=0x29d4 runnable [0x05a8f000
..0x05a8fd68]
at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
at oracle.ide.natives.NativeHandler$2.run(NativeHandler.java:252)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=6 tid=0x048b01d8 nid=0x29cc in Object.wait() [0x
0528f000..0x0528f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1105d9f0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1105d9f0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"IconOverlayTracker Timer" prio=6 tid=0x03876cc8 nid=0x29c8 in Object.wait() [0x
04fbf000..0x04fbfa68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1105da68> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1105da68> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TimerQueue" daemon prio=6 tid=0x03b23470 nid=0x2954 in Object.wait() [0x0436f00
0..0x0436fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x10733728> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x10733728> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=6 tid=0x03b047a0 nid=0x2950 in Object.wait() [0x041ff000
..0x041ffbe8]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.getNextEvent(EventQueue.java:345)
- locked <0x106c2968> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:189)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:153)
at java.awt.Dialog$1.run(Dialog.java:515)
at java.awt.Dialog.show(Dialog.java:536)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:361)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:208)
at oracle.ide.dialogs.ProgressRunnable.start(ProgressRunnable.java:116)
at oracle.dbtools.raptor.navigator.ObjectFilter.getChildren(ObjectFilter
.java:192)
at oracle.ideimpl.explorer.BaseTreeExplorer.addChildren(BaseTreeExplorer
.java:358)
at oracle.ideimpl.explorer.BaseTreeExplorer.open(BaseTreeExplorer.java:1
016)
at oracle.ideimpl.explorer.BaseTreeExplorer$4.run(BaseTreeExplorer.java:
2003)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Windows" daemon prio=6 tid=0x03ad7188 nid=0x2948 runnable [0x03fff000..0x03
fffce8]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=6 tid=0x03ad6cb0 nid=0x2944 in Object.wait() [0x03eff000..0x
03effd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x106c2a60> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x106c2a60> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=6 tid=0x03acf268 nid=0x2940 in Object.wait() [0x03
dff000..0x03dff9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x106c2ae8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x106c2ae8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=6 tid=0x00c64a48 nid=0x2934 runnable [0x000000
00..0x00000000]
"CompilerThread0" daemon prio=6 tid=0x00865008 nid=0x2930 waiting on condition [
0x00000000..0x034df84c]
"Signal Dispatcher" daemon prio=6 tid=0x00c612b0 nid=0x292c waiting on condition
[0x00000000..0x00000000]
"Finalizer" daemon prio=8 tid=0x00c58e58 nid=0x2928 in Object.wait() [0x032df000
..0x032dfce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x106601f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x106601f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=6 tid=0x00c583b8 nid=0x2924 in Object.wait() [0x
031df000..0x031dfc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x10660270> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x10660270> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00868828 nid=0x2914 waiting on condition [0x00000000..0x0012
fb70]
"VM Thread" prio=6 tid=0x00c188f0 nid=0x2920 runnable
"VM Periodic Task Thread" prio=6 tid=0x00c60fb8 nid=0x2938 waiting on condition

Expandable Table Need to Sum Different Cost Centers

I am trying to complete a mileage reimbursement form. I think I have a good design (?) but I am missing a critical efficiency within the form. I want the form to be able to calculate the cost centers across the expandable table within the subform. I have a dropdown that has different cost centers. How would I be able to sum like cost centers within the expandable table? Can I populate another table with just the totals for a particular cost center by calculation? I would need this for all cost centers This would help out the accounting department as the mulitple cost centers would be added.
My first page is expandable to accomodate multiple rows and has a page total and a grand total that floats if more rows are needed. My second page is more or less just for accounting I have a seperate table that right now is manually completed. The clerk has to printout the form and then manually add each cost center and then add it to the table on the second page.
I have tried to just use a numeric field on the second page attempting to get the calculations based of the test entry in the cost center of Edit. It only places the data of the first entry and does not cycle through and capture all cost centers in the expandable table that are Edit. Any help in the code and ideas on how to present the total in a new table would be greatly appreciated.I am a beginner at this and am trying to learn and complete this on my own but I am not sure what to do. Attached is my form.
http://aaa9.org/Updated%20Employee%20Mileage%20Expense%20Form.pdf

The following JavaScript will loop through the table and total up according to what is selected in the dropdown list. Put it on the Calculate event of a numeric field.
You'll need a separate field for each category and you'll need to update the rawValue test to the appropriate number for each field (I started with 2 because your first entry, which is 1 is blank). Depending where you put the fields you'll need to update the path to "Table1".
var nTotal = 0;
for (var i=0; i < Table1._Item.count; i++){
if (xfa.resolveNode("Table1.Item[" + i + "].DropDownList2").rawValue == 2){
nTotal ++;
this.rawValue = nTotal;
Couple of tips:
You've got an extra subform on your "page 3", you've wrapped one subform with another which isn't needed.
It's important to name your subforms, especially when scripting.

I am receiveing error while creating Z table: Entry in table TAORA missing

Hi Experts,
I am receiving "Entry in table TAORA missing" while creating Z table.
Please help
Edited by: N_niki on Jun 11, 2011 9:22 AM

Hi
1) Check for the DB System. The Table name in "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
Regards
Gopu

Some SAP R/3 Tables are Missing

Hi Friends,
I made a connection between SAP R/3 and Crystal Reports. When I am trying to see the tables of SAP R/3 I am not able to see all the tables only few tables are visible. For example in Standard table I am able to see only LIKP table, but VBAK, VBAP etc ... tables are missing in the list.
Can any one guide me to get the total list of SAP R/3 tables.
Regards
Sankar

See this posting for how to: Crystal Reports 10
You'll have to change the registry key to match your version but should work for you.
Thank you
Don

One table is missing in R/3 DDIC

Hi Experts,
While I am monitoring the db02 T-code, Under tables and indexes it is showing that one table is missing in R/3 DDIC.
Tables Indexes
Total number 68,514 82,026
Total size/kb 43,431,936 43,282,240
More than 1 extent 2,957 3,470
Missing in database 0 0
Missing in R/3 DDIC 1 0
Space-critical objects 0 0
Please let me know how can i find out this missing table in R/3 DDIC
Regards,
Reddy V

Hi Deepak,
I have done the same
In T-code DB02 Menu "Go TO" -> Table and Indices -> DB <-> ABAP Dic<->Display
It is showing the below details
Other checks
Tables 1
SCI_TEMPT Should not be created in DB
I have select the SCI_TEMPT table and clicked on create in DB.
After that again I have checked the db02 t-code again it is showing the same.
Please let me know how can fix this issue.
Regards,
Reddy V.

Need to send text string to new row in expandable table

I have a table that is a summary of other choices made throughout the document. For specific check boxes in the form, there is a defined phrase that needs to be sent to a new row in the summary table.
The general idea is that for checkbox:
form1.sfMain.sfContent.tableC2.Row1.cbC2b6
if (this.rawValue == "1") {
this.resolveNode('form1.sfApp6.tableApp6A._Row1').addInstance(1);
this.resolveNode("form1.sfApp6.tableApp6A.Row1[*].ddApp6A1c").rawValue = "Blue bottle";
This needs to be something I can specify for each applicable checkbox (each will have a different text string), but I don't know what the final count is going to be (depends on choices made by the user) so I can't delete rows in the table and start over every time. It needs to be additive.
Any suggestions?
Message was edited by: cyndilynnrose

For anyone needing the same thing, I found exactly what I needed:
http://www.truetechtroubleshooting.com/2012/02/advanced-expanding-tables-and-script.html
The hardest part of getting it working was figuring out how many parent levels I needed to add since I have a heavily layered form.

Xref table is missing when a pdf file is created with acrobat distiller 9.0.0

Hi
I created a pdf file with the new acrobat distiller 9.0.0 and i noticed that the xref table is missing in it.
Whereas the pdf files which created in older version (acrobat distiller 7.0.5) had the xref tables.
As i have written a perl script to open the pdf files (used a ready made module downloaded form cpan.org). The script works fine with all old pdf files but fails when it tries to open the pdf files created with distiller 9.0.0.
Could i know is any thing changed on acrobat distiller 9.0.0 ?
Thanks
Balaji.

PDF documents of version 1.5 and higher can contain cross-reference streams. Read the PDF Reference.

Subtract calculation in an expanding table?

Hi
I am currently designing a form in Livecycle ES2 and am in need of calculation script.
I have an expanding table with add rows on it.
In the table i have a drop down list with 2 items that be can selected DR and CR, an Amount field and a total field.
Currently the Amount field and a totals field adds up correctly with this script Sum(Spersonaldetails2.Table1.Item[*].Amount)
However i now need the Totals field to calculate based on which item from the drop down is selected.
So if DR is selected i need it to add to the total and if CR is selected i need to subtract from the total.
One row could be a DR and the next row a CR.
I am unable to have the totals field subtract the Amount if CR is selected.
look forward to any help. i have been wrecking my brain over this.

Hi,
A sumif equivalent in FormCalc could look like;
var totalRows = LoanProposal.Table1._Item.count
var groupTotal = 0
var list = ref(LoanProposal.Table1.resolveNodes("Item.[ItemName == ""Lodging""]"))
for i=0 upto list.length - 1 step 1 do
    groupTotal = groupTotal + list.item(i).Total
endfor
Note the totalRows variable is not used but is required so the calculate event knows to fire when a row is added or removed.
This would have to be repeated for each category so you might want to have a calculate event code at a higher level (like the LoanProposal subform) with some JavaScript code like;
// Reset all fields
xfa.host.resetData([Mileage.somExpression, Lodging.somExpression].join(","));
var rows = Table1.resolveNodes("Item[*]");
for (var i = 0; i < Table1._Item.count ; i++)
    var row = rows.item(i);
    switch (row.ItemName.rawValue)
        case "Mileage":
      Mileage.rawValue += row.Total.rawValue;
            break;
        case "Lodging":
      Lodging.rawValue += row.Total.rawValue;
            break;
I've only done the first two categories but you can see the pattern
Regards
Bruce

Disappearing white lines in standard table mode

I always work in Standard Table Mode -- today I somehow lost
the white lines that help me make sense of it.
Screenshot:
http://www.clicksharpmarketing.com/beta/file_stash/Picture2.png
So it is supposed to look like what you see in the
screenshot, but in actuality there are none of those lines. Did I
accidentally toggle something off?
Thanks
PB

Hi PB!
It sounds like you might be disable CSS layout lines. Open
your visual aid that is in the document tool bar (the icon with an
eye) and see if it’s anabled.
Cheers!

Expanding table: Calculating difference to value from previous row

Hi there,
I am a complete newbie to LiveCycle Designer (ES2) and have created below document with an expanding table.
Shared Files - Acrobat.com
My aim is to make the form user friendly by adding a calculation in the field "Twist" which calculates the difference from the current row to the previous row.
I have no idea about Java Script, I am afraid, and also don't know if this is possible at all so it's probably a bad idea after all.
The reason for setting it up as an expanding table is so that the form can be used for all 32 instances the form would be used for (they would all require different amount of rows altogether).
The calculation would start in row 2 (Checklist.Table1), take the twist value entered in row 2 and calculate the difference to the twist value entered in row 1.
Then in row 3, it would calculate the difference between twist value in row 3 to row 2 etc.
So subtract value of field in rown with value in rown-1 or something in this direction.
Is there anyone at all who could help me with this at all?
I'd be very grateful for any advice you could give me.
Thanks a lot!
Mathilda

Not sure what happened with the formatting there, try this;
if (Row1.index > 0 && !Row1.resolveNode("NumericField4[0]").isNull)
    var prevTwist = Table1.resolveNode("Row1[" + (Row1.index - 1) + "].NumericField4[0]").rawValue
    var result = Math.abs(3000 / (Row1.resolveNode("NumericField4[0]").rawValue - prevTwist));
   this.rawValue = result;
else
    this.rawValue = "";

Need help referencing expanding table data in vBody.

I have a form that I created in LiveCycle that has an expanding table with 7 columns of data. Once the form has been completed by the user they will click a button that will trigger a mailMsg event and will send form data as a plain text email. Everything works great except for the loop that is supposed to write the table data.
This is what the table data should look like in Outlook message.
Column1: rawValue
Column2 rawValue
and so on
Column1: rawValue
Column2 rawValue
and so on
script:
var i=0;
for (i=1;i<=vRowCount;i++)
vBody +="***********************************\r\n";
vBpdy += "Column1: " + xfa.resolveNode(form.form1.ReportFields.Table1.Row1[" + (i-1) + "].Column1").rawValue + "\r\n";
vBody +="***********************************\r\n";
That is all I have written for the loop right now until I figure out why it is not executing.

If you want insert and delete the same data you only have to use the same where
Sth like th
CTH@>create table demo
2 ( n number,
3 c varchar2(1),
4 d date );
Table created.
CTH@>insert into demo (n,c) values (1, 'a');
1 row created.
CTH@>insert into demo (n,c) values (2, 'e');
1 row created.
CTH@>insert into demo (n,c) values (3, 'i');
1 row created.
CTH@>insert into demo (n,c) values (4, 'o');
1 row created.
CTH@>insert into demo (n,c) values (5, 'u');
1 row created.
CTH@>create table demo1
2 ( n number,
3 c varchar2(1),
4 d date default sysdate);
Table created.
CTH@>begin
2 insert into demo1
3 select *
4 from demo
5 where d is null;
6
7 delete demo where d is null;
8
9 end;
10 /
PL/SQL procedure successfully completed.
CTH@>select * from demo1;
N C D
1 a
2 e
3 i
4 o
5 u
5 rows selected.
CTH@>select * from demo;
no rows selected
CTH@>insert into demo (n,c) values (1, 'a');
1 row created.
CTH@>insert into demo (n,c) values (2, 'e');
1 row created.
CTH@>insert into demo (n,c) values (3, 'i');
1 row created.
CTH@>insert into demo (n,c) values (4, 'o');
1 row created.
CTH@>insert into demo (n,c) values (5, 'u');
1 row created.
CTH@>
CTH@>begin
2 insert into demo1 (n,c,d)
3 select n,c, sysdate d
4 from demo
5 where d is null;
6
7 delete demo where d is null;
8
9 end;
10 /
PL/SQL procedure successfully completed.
CTH@>select * from demo1;
N C D
1 a
2 e
3 i
4 o
5 u
1 a 19-09-2007 13:38:07
2 e 19-09-2007 13:38:07
3 i 19-09-2007 13:38:07
4 o 19-09-2007 13:38:07
5 u 19-09-2007 13:38:07
10 rows selected.
CTH@>select * from demo;
no rows selected

Entry in table TAORA missing! Please help with this error!

I am moving a Z table from QAS to PRD and in PRD the table gets moved in inactive state. When I try to activate it I get an error "Entry in table TAORA missing". Could someone please give me any information how to fix this?
Thanks.
Mithun

Hi Mithun Dada,
when u created this Z table may u have not maintained the
Data class and some setting correctly.Check for it and move it.
<REMOVED BY MODERATOR>
Thanks and regards,
Rajeshwar.
Edited by: Alvaro Tejada Galindo on Apr 23, 2008 5:14 PM

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote on table mod

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote in table mode inpages '09?

Footnotes can only be inserted in the main text area between the margins on a Word Processing document.
Peter

Lexmark all-in-one printer error: Color table is missing

I've got this "Color table is missing." only after I accepted the automatic update 2.2 of 24.2 MB coming from Lexmark.
To solve the problem I had to remove ALL traces of Lexmark drivers and software, then reinstall the correct driver, the one for Mac Os 10.6 (snow leopard).
Now I must remember NOT to accept any automatic update and I can use again my X3550.
So please DO NOT INSTALL that update 2.2 of 24.2 MB!!!
Message was edited by: Daniele P.

Color table is missing: solved.
I've got this "Color table is missing." only after I accepted the automatic update 2.2 of 24.2 MB coming from Lexmark.
To solve the problem I had to remove ALL traces of Lexmark drivers and software, then reinstall the correct driver, the one for Mac Os 10.6 (snow leopard).
Now I must remember NOT to accept any automatic update and I can use again my X3550.
So please DO NOT INSTALL that update 2.2 of 24.2 MB!!!

Expanded Tables Mode Missing

Similar Messages

Maybe you are looking for