Expdp failed job disappear

Hi all,
I am testing the expdp on attach job in 10.2R3
1. expdp job and ^C to stop it
C:\TEMP>expdp system/oracle directory=testdir dumpfile=test5.dmp logfile=test5.log full=y job_name=expjob
. . exported "SCOTT"."DEPT" 5.656 KB 4 rows
. . exported "SCOTT"."EMP" 7.820 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.585 KB 5 rows
. . exported "SYSMAN"."AQ$_MGMT_NOTIFY_QTABLE_S" 7.734 KB 1 rows
^C
2. in sqlplus check job
select * from dba_datapump_jobs;
OWNER_NAME JOB_NAME OPERATION JOB_MODE
STATE DEGREE ATTACHED_SESSIONS DATAPUMP_SESSIONS
SYSTEM EXPJOB EXPORT FULL
EXECUTING 1 1 3
3. then after 1-2 mins, check the job status again, it disappears????
select * from dba_datapump_jobs;
no rows selected
Please advise what is happening.....
thanks
andrew

^C doesn't stop the job it should take you to a prompt that looks like
Export>
then you can stop the job using
Export>STOP_JOB
the job is finished that's why your not seeing it when you do a
select * from dba_datapump_jobs

Similar Messages

Problem with EXPDP failed job

Hi,
I started one job name expschema for expdp
I break that job and remove .dmp files.
i used STOP_JOB command.
when i tried to run job with same name it throws error.
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYSTEM.EXPSCHEMA"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 871
ORA-00955: name is already used by an existing objectany one suggest me how to clear old job name
i can't use kill_job as i removed files from server
Thanks

ChetanS wrote:
Hi,
I started one job name expschema for expdp
I break that job and remove .dmp files.
i used STOP_JOB command.
when i tried to run job with same name it throws error.
ORA-31626: job does not exist
it seems like you encountered this error due to the next ora which is
ORA-31633: unable to create master table "SYSTEM.EXPSCHEMA"so check if you valid usage settings for that table, if table exists , etc
also
what's with the following lines, did you check that
ORA-06512: at line 95
ORA-06512: at line 871any one suggest me how to clear old job nameok
i can't use kill_job as i removed files from server
Thankscheers

DPM 2010 Scheduled Jobs Disappear rather than Run

I have a situation where I have a DPM server that appears to be functioning fine, but none of the scheduled jobs run. No errors are given, there are no Alerts, and there is nothing in the Event log (Application and System) which indicates a failure.
All my Protection Groups show a green tick to indicate that they are fine, but the last successful backup for all of them is Friday the 8th of February.
If I go to Monitoring and Jobs I see the jobs scheduled, but when the time comes for the job to run, it does not go into the "All jobs in progress", it just merely disappears, like thus:
And a few minutes later,
As you can see, the jobs disappear from the queue, and the total number of jobs decreases accordingly. These jobs do not go into any of the other 3 Statusses (Completed, Failed or In Progress), they just disappear without a trace.
There is some unallocated space, albeit not much (Used space: 21 155,05 GB Unallocated space: 469,16 GB). If space was an issue I would expect to see errors to indicate this.
DPM 2010 running version 3.0.8193.0 (hotfix rollup package 6) using remote instance of SQL 2008 which is functioning fine. I have tried stopping/starting the services, and even rebooted the server twice. The remote instance of SQL server is using
a domain account as its service account. There are no pending Windows updates, i.e. it is fully up-to-date.
The System Center Data Protection Manager 2010 Troubleshooting Guide (July 2010) does not show how to troubleshoot this particular probelm.
Does anybody know how to resolve this issue or which logs might help me troubleshoot it?

OK,
Did you change the SQL Agent user account ?
If so, DPM enters the SQL Agent account name into the registry and later we check that account each time the DPM engine launches. The internal interfaces to DPM are secured using this account so the account name needs to match the account the SQL Agent
is using.
Step 1
In the registry HKLM\Software\Microsoft\Microsoft Data Protection Manager\Setup alter both
SqlAgentAccountName and SchedulerJobOwnerName keys to reflect the SQL Agent user account being used.
Step 2
Update DCOM launch and access permissions to match what was granted to the Microsoft$DPM$Acct account.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Expdp fail and create table SYS_EXPORT_SCHEMA_20

Hi Gurus
I am using Oracle 10.2.0.3 in AIX env
My database size is around 1600 GB. Sometime my expdp fail and create table like SYS_EXPORT_SCHEMA_20, SYS_EXPORT_SCHEMA_05. As I run expdp from system user , I notice that it create this type of table into system tablespace. It time it consume around 5gb space. Now my system tablespace size is 68 GB.
Can I drop those table? If I drop these table then it create any problem? This is my production database.
Regards
Rabi

user13134974 wrote:
Hi Gurus
I am using Oracle 10.2.0.3 in AIX env
Regards
RabiThose tables you were mentioning, SYS_EXPORT_SCHEMA_nn , are the data pump master tables used for data pump jobs;their purpose is to
hold the info about the job details.
Once the job has finished table should be droped, but in case of a job failure table remains so every new dp job must create new SYS_EXPORT_SCHEMA_nn table
with the +1 nn iteration depending on the name of the last master table that was left due to the dp job failure.
Cleaning those tables can be done with the dbms_datapump STOP_JOB Procedure, check the docs about the details :
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm
You can also go visit youroracle support to see examples and instructions for cleaning your db from those dismised master tables,
How To Cleanup Orphaned DataPump Jobs In DBA_DATAPUMP_JOBS ? [ID 336014.1]

EXPDP fails with ORA-39125: Worker unexpected fatal error in KUPW $

Hi Friends,
Oracle 10.2.0.4.0 on Sun OS
Im trying to do metadata_only export using EXPDP
Facing the below error
ORA-39125: Worker unexpected fatal error in KUPW $ WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB []
ORA-31642: The following SQL statement fails:
BEGIN "SYS". "DBMS_RULE_EXP_RULES." SCHEMA_CALLOUT (1,1,1, '10 .02.00.04.00 ') END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 907
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW $ WORKER", line 6307
PL / SQL Call Stack
object line object
handle number name
51bf5dc20 15032 package body SYS.KUPW $ WORKER
51bf5dc20 6372 package body SYS.KUPW $ WORKER
51bf5dc20 2396 package body SYS.KUPW $ WORKER
51bf5dc20 6944 package body SYS.KUPW $ WORKER
51bf5dc20 1314 package body SYS.KUPW $ WORKER
51c7e8650 2 anonymous block
====================================
Findings:
I check the status of DBMS_RULE_EXP_RULES
OWNER OBJECT_NAME OBJECT_TYPE STATUS
SYS DBMS_RULE_EXP_RULES PACKAGE BODY VALID
SYS DBMS_RULE_EXP_RULES PACKAGE VALID
PUBLIC DBMS_RULE_EXP_RULES SYNONYM VALID
DBMS_METADATA & DBMS_SYS_ERROR packages are valid.
======================================================
Error in the alert:
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=25, OS id=6506
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS', 'KUPC$C_1_20120908075037', 'KUPC$S_1_20120908075037', 0);
kupprdp: worker process DW01 started with worker id=1, pid=26, OS id=6633
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS');
when i check the trace file, find the below error
ORA-04063: package body "SCH.COLLECTION" has errors
But when I check the status of the package, it's valid.
Thanks for your help
KSG

Hi;
Is it full exp? Of yes please review:
DataPump Export Fails With Errors ORA-39125 ORA-31642 ORA-1422 [ID 790988.1]
Full And Schema DataPump Exports Fail With Errors ORA-39125 ORA-31642 During DBMS_SCHED_EXPORT_CALLOUTS.SCHEMA_CALLOUT [ID 1109045.1]
EXPDP FAILS WITH ORA-39125 ORA-31642 DBMS_SCHED_EXPORT_CALLOUTS [ID 445291.1]
Full Database DataPump Export (EXPDP) Fails With Errors ORA-39125 ORA-4045 ORA-1031 On XDB.XDB_PI_TRIG [ID 1102434.1]
Errors ORA-39125 ORA-1801 When Running DataPump Export (EXPDP) [ID 815683.1]
Regard
Helios

Failed Job Query on Central Management Registered Servers - Host Server is not included in results

The following standard query works great for showing failed jobs on servers. Executing this in Central Management Registered Servers works as expected, but the Host Server results are not listed, and the same query needs to be executed against the host server
too.
e.g.
Registered Servers are defined on Server A
Results are displayed from servers B, C, D & E - but results are not displayed for Server A.
How do we receive results from Server A without having to execute a separate query ?
DECLARE @PreviousDate datetime
DECLARE @Year VARCHAR(4)
DECLARE @Month VARCHAR(2)
DECLARE @MonthPre VARCHAR(2)
DECLARE @Day VARCHAR(2)
DECLARE @DayPre VARCHAR(2)
DECLARE @FinalDate INT
-- Initialize Variables
SET @PreviousDate = DATEADD(dd, -7, GETDATE()) -- Last 7 days
SET @Year = DATEPART(yyyy, @PreviousDate)
SELECT @MonthPre = CONVERT(VARCHAR(2), DATEPART(mm, @PreviousDate))
SELECT @Month = RIGHT(CONVERT(VARCHAR, (@MonthPre + 1000000000)),2)
SELECT @DayPre = CONVERT(VARCHAR(2), DATEPART(dd, @PreviousDate))
SELECT @Day = RIGHT(CONVERT(VARCHAR, (@DayPre + 1000000000)),2)
SET @FinalDate = CAST(@Year + @Month + @Day AS INT)
-- Final Logic
SELECT j.[name],
s.step_name,
h.step_id,
h.step_name,
h.run_date,
h.run_time,
h.sql_severity,
h.message,
h.server
FROM msdb.dbo.sysjobhistory h
INNER JOIN msdb.dbo.sysjobs j
ON h.job_id = j.job_id
INNER JOIN msdb.dbo.sysjobsteps s
ON j.job_id = s.job_id
AND h.step_id = s.step_id
WHERE h.run_status = 0 -- Failure
AND h.run_date > @FinalDate
ORDER BY h.instance_id DESC
John

Hi vsla,
According to your description, I do a test. When I designate a Central Management Servers and create server groups, then execute statements against
multiple configuration targets simultaneously, it
indeed only contains the results of server groups, you need to execute again on the host server (Central Management Servers) then display the results of Central Management Servers, because the Central Management Server cannot be a member
of a group that it maintains.
If you want to get all servers results by executing the statement one time. I recommend you use Local Server Groups, create new register server and add all servers to the Local Server Groups, then right click “new query
“, execute the statements, it will display all results about all servers. There are more details about administering multiple servers using Central Management Servers, you can review the following article.http://technet.microsoft.com/en-us/library/bb895144
http://technet.microsoft.com/en-us/library/bb964743
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Restart of failed jobs while export of a SAP instance

Hi,
I am performing export of a source system for unicode conversion. 8 parallel processes have been configured. 40 jobs completed and 3 jobs failed in export with an error "Unable to extend tempfile".
Now that tempfile has been added. My questions is how to restart a failed job while the export of SAP instance is in progress?
Thanks

If I stop sapinst and restart it, will it cause loss of data? (The 2 jobs failed when 24 job completed. How 200 jobs have already completed)
Based on the above, I have the following questions.
1- If I restart sapinst, will it process the 2 failed jobs and the proceed from 201 job, since already 200 have completed.
2- In sapinst, there is no stop button. Do I have to logoff and restart sapinst -> continue old installation?
Thanks,
Haleem

CCMS alert emails for failed jobs

Hello All
What are the steps to set a ccms alert for failed jobs? Also is it possible to set ccms to warn us of long running jobs. I would like to set the sysem so that we get a email notification on any failed jobs or long running jobs.
I appreciate any input or leads.
Thanks

Hi,
You can get the alerts for failed jobs, Just maintain the realted setting in the ccms_onalert_email
maintain the address and then assign this as auto reaction method in your ccms template for background jobs.
Also i request to search SDN there are many threads related to auto reaction mails.
Regards,
Vamshi.

Unable to view failed jobs

i am using oracle application server 10.1.2.3.
when i deploy and run the report i m getting unable to run report error but when i want to see the reason for the error in enterprise manager failed jobs link of the report server where i have deployed,then it is blank.
infront of failed jobs it is 100 but when i click the link nothing appears in the next screen where it supposed to show all failed jobs.
i m using one and only default report server.
so any body knows how it can be achieved, if i am not knowing the reason for the failure of report i am unable to solve.
thanks...

HI, you may wanna read this, to enable trace.
Link:[http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_tune.htm] 20.1.2 Report Trace
Hope this helps.
Greetings.

Query failed jobs in a BLT?

Hi all,
is there a chance to query failed jobs from a BLT (MII 12.0)? I know that I can use a xml query to read the job history:
/XMII/Illuminator?service=Scheduler&Mode=History&RowCount=1000&id=1001&StartDate=06/10/2010%2000:00:00&EndDate=06/10/2010%2023:00:00
Now for monitoring reasons I would like to have a query that checks if there have been failed jobs in a time range. Adding something like "&Status=FAILED" is ignored.
Michael

Hello Michael,
I think we can perform this using BLS,
1) Using XML Loader Action load the URL
2) Use Repeator then in links use XPath Expression to Filter out Relevant messages based on the Status Field.
I believe the loader works with content-type being "text/xml"
Hope this helps!!
Regards,
Edited by: Adarsh Sidnoor on Jun 15, 2010 4:38 PM

Area Career&Job disappeared (ESS implementation)

Hi All,
I'm Setting up ESS/MSS on EP 6.0 SP12 with ERP2004 on the backend.
Quick link for area Career&Job disappeared from ESS main page after portal restart, bookmark for page Career&Job still persists, but when I try to see services on this page I get the error:
"com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER does not exist
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:232)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:398)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:255)
and so on. Iviews, role, pages for ESS persist in content
But from the SPRO point of view in the backend system everything looks fine and nothing was changed previously.
Any help will be appreciated
Best regards, Elena

As Mentioned by Wenshan, Please refer to not 797174.
You might need to import the table entries from T7XSSSERSTRING and T7XSSSERSTRLAN from the base client to the upper client(s)
Regards
PR

Jobs disappear from job list

Hello experts,
i post this thread because there is a new problem with a reports server running in Oracle Application Server 10.1.2.3.0
We configured a reports server like this:
Engine-ID: rwEng
Classpath:
initEngine: 1
maxEngine: 3
minEngine: 1
engLife: 50
maxIdle (minutes): 30
Cache Size (MB): 30
Timeout (minutes): 15
max Connections: 20
max Queue-size: 1000
trace-option: none
We queued 15 daily executive jobs.
But these jobs disappear after a while. So the queue list is empty!
sometimes after a week and sometimes after a few days this jobs disappear from queue.
May you can help me solving this problem?
Thanks a lot.
Best regards
Florian

Hello, I to have had this problem with a brand new Mac Pro and new install. I did note that, whilst I didn't use the migration assistant I did copy over my preferences from an old system though and may have corrupted something.
My buddies loaded, presumably from AOL system as they appear no matter where i log in from. But a new buddy that i tried to add simply appeared, pulsed for a few seconds and disappeared. I was able to chat with the friend and screen share, audio chat and video chat with them but could only make a connection if I was quick to do so from adding them again to my buddy list.
To resolve the issue I deleted all iChat preference files:
com.apple.iChat.AIM.plist
com.apple.iChat.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
that were stored in my ~/Library/Preferences folder.
I did have to re-sign in to iChat but that is only a user name and password which gets re-stores in my Keychain so no bother.
Hope this helps as it worked for me!
Just

Broken jobs and failed jobs

hi all..
please tell me difference between broken jobs and failed jobs
thanks

Please refer documentation .
Failed Jobs
If a job has the status of FAILED in the job table, it was scheduled to run once but the execution has failed. If the job was specified as restartable, all retries have failed.
If a job fails in the middle of execution, only the last transaction of that job is rolled back. If your job executes multiple transactions, you need to be careful about setting restartable to TRUE. You can query failed jobs by querying the SCHEDULERJOB_RUN_DETAILS views.
Broken Jobs
A broken job is one that has exceeded a certain number of failures. This number is set in max_failures, and can be altered. In the case of a broken job, the entire job is broken, and it will not be run until it has been fixed. For debugging and testing, you can use the RUN_JOB procedure.
You can query broken jobs by querying the SCHEDULERJOBS and SCHEDULERJOB_LOG views.
Regards
Renjith Madhavan

Request response code 503 when try to view failed jobs on report server

I have application server 11. From enterprise manager I get a list of completed jobs and failed jobs for the report server. When I try to click on failed jobs I get
Error in request response code 503.
I am new to weblogic server and I don't know where to look for this problem.

Mike,
how do you access Reports from Forms and can you run a stand-alone Reports from the browser URL (using the Reports Services and the Reports Services servlet rwservlet).
if you can't run a Reports directly then the problem is in teh confoguration itself and you should contact customer support via metalink.oracle.com
Frank

DBMS_SCHEDULER failed jobs status

Hi
how to check DBMS_SCHEDULER failed jobs status ?

Don't duplicate thread.Please close one of the threads
oracle failed DBMS_SCHEDULER jobs status?

Expdp failed job disappear

Similar Messages

Maybe you are looking for