Expense Report Expense Program errors in R12.1.2

Hi gurus,
I am trying to run the Expesne Report Export Program and it is erroring out the Reject code is (INCONSISTENT SUPPL SITE).Here we have to Sources
1:XpenseXpress
2: EXTAMEX
and when i run the export program for source 2 the invoices are getting created and when i run the export program for the source 1 the records are getting rejected with the error (INCONSISTENT SUPPL SITE).
The interesting thing is the vendor_id(12759) and vendor_site_id(462101) for both the sources is Same.The data for which I am running is the data from the 11i Production Instace for the previous day.The error I am getting is in R12.1.2 Instance.
I searched the tables ap_suppliers,ap_supplier_sites_all,hz_parties and hz_party_sites_all the supplier is active it has site's defined every where only thing i Observed is for the same vendor we have Vendor_site_codes as [M5H 1T1(site_id :424663,M5H1T1:462101).This is what i could research and found out.I am struck Here
                 Help would be highly appreciated.
   Thanks & Regards
        Krishna

Hi Krishna,
please check the vendor type should be "Employee".
Try to create a expense report for the same vendor site manually you will get the exact issue.
If still getting issue please send the exact error code/desc and vendor site screen shot.
Regards,
Ajit
[email protected]

Similar Messages

Expense Report Export Program keeps on running normally for hours

Hi and assalam o alay kum Gurus
I am facing a problem in creating of invoice through expense report export program, I create expense report and run the program "Expense Report Export" but the issue is the program keeps on running for several hours we also raised SR for this issue but no solution provided after 6 months.
We are currently on R 12.1.2 can any one please guide me what to do, maybe any some one faced the same issue before, I really need your help just to check whether I missed any setup part or this is some kind of bug.
Best Regards
Danish.

Did you ever find a solution to this question? My internet expense templates are set to receipts are required for CASH and CREDIT CARD over a certain amount. Also, internet expense setup and admin is set to place the report on hold if receipt has not been received. I ran the Expense Report Export and they imported even though receipts were not received. Thank you.

Create Expense Report ended with error

Hello Experts,
We are facing problem in Create Expense Report under Employee Self Service page.
But when we check this iview directly from Content Administration -> Portal Content -> Content Provided by SAP -> End User Content -> Employe Self Service -> iviews -> Travel & Expense -> Create Expense Report    -->>>>>>>>>>> it works fine.
As part of ESS/MSS post installation, we have done following activities ->
1. Created System in Portal pointing to backend.
2. Created Aliases -> SAP_R3 (set to default), SAP_ECC_TRAVEL and DV1CLNT311 (which is logical name of backend system).
3. Maintained Portal System -> ITS parameters
4. Maintained Portal System -> WAS Connection Parameters.
Connection test for Connector, ITS and WAS is working fine.
But accessing Create Expense Report from Employee Self Servcie page dumps, here is the error from defaulttrace file ->
#1.5 #005056BF4C8A007A0000001D000006FC000465017F230EE8#1236957009345#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#ALTOBELLM#19361##n/a##f99954c00fe011de8d8d005056bf4c8a#SAPEngine_Application_Thread[impl:3]_22##0#0#Error#1#/System/Server#Java###Exception ID:03:10_13/03/09_0019_4020550
[EXCEPTION]
{0}#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.12.allmytrips/com.sap.pct.erp.ess.12.allmytrips
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : ALTOBELLM
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>&\#39;; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System:    &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;client&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 29 more
#1.5 #005056BF4C8A007A0000001F000006FC000465017F231514#1236957009345#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#ALTOBELLM#19361##n/a##f99954c00fe011de8d8d005056bf4c8a#SAPEngine_Application_Thread[impl:3]_22##0#0#Error##Java###03:10_13/03/09_0019_4020550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>&\#39;; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System:    &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;client&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
Looking forward to get ideas on how to resolve this issue.
Thanks
Davinderpal Singh

Hello Sriram,
Thanks for your time.
When i have checked PA0105 table for user ALTOBELLM, i am able to see following entry maintained for the user.
                                                                                MANDT PERNR      SUBTY OBJPS SPRPS ENDDA      BEGDA      SEQNR AEDTM      UNAME        HISTO ITXEX REFEX ORDEX ITBLD PREAS FLAG1 FLAG2 FLAG3 FLAG4 RESE1 RESE2 GRPVL USRTY USRID
311   02000267   0001              31.12.9999 01.01.2009 000   02.03.2009 ALTOBELLM                                                                                0001   ALTOBELLM
Please let me know how can i check whether Travel Privelages IT0017 is maintained for this employee in the date range.
Thanks
Davinderpal Singh

Crystal Reports 10 Program Error

Post Author: mattweinstein
CA Forum: General
I created a simple report that displays pictures (image datatype length 16) from a SQL 2000 database. The reports has no problem accessing the data and generating the pages. However, when I navigate between specific pages (using prev and next), I receive the program error "crw32.exe has generated errors...". I thought that perhaps some of the pictures were corrupt. However, I created the same report in Crystal V8.5 and it is stable. The error log that was generated from this error does not help me to understand the problem. I tried the report from a different workstation and still received the error. I installed the latest service pack and hotfixes. No change. Can someone please give me some advice?
Thanks,
Matt

Are you using SAP Business One and Crystal Report add on? If not, please post is on the Crystal Report related forum and close this thread.
Thanks,
Gordon

Transaction audit report concurrent program error with signal 4

My EBS is 11.5.10.2 on AIX 5.3 with DB 10.2.0.4
When i run a customized transaction audit report in production getting " program completed with error signal 4"
can any one kindly provide a quick solution as iam facing this in my production
thanks in advance .
Ramesh

please see
Note: 215601.1 - Diagnosing and Troubleshooting Signal Errors
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=215601.1
Enable trace on this concurrent program, and submit it again. Let's see if you get more details about the error in the concurrent request log file.

Audit Expense Report Error in R12.1.3

Hi,
We encountered a workflow error after audit expense report. We are on R12.1.3 version.
Issue:
We set up a Audit Rule Sets and assign it to OU, and create an expense report. Manager can approve it and Auditor can approve it, also we can see confirmation message " The audit for this expense report is complete. The approved parts of this expense report are ready for Payables invoice import and payment." But can not create expense report invoice in AP.
We then check the expense report workflow status, it stuck in "AP Approval Process".
Another testing:
We end date the Audit Rule Set OU assignment, and run the same testing, this time, we can create expense report invoice successfully.
Please help!
Winston

Thanks, this note asks to have AP department to audit the expense report from Internet Expenses Auditor responsibility. We already have done this. Acutally, the issue happens after we audit the expense report.

Travel Expense Report - Error when changing expense type

Hi:
Our system: ESS SP7; NW2004S SP13; ECC 6.0
In the travel and expense system when the user is editing a rejected expense report - the following error is occuring.
While changing each line item in an expense report to a different category user is encountering an error. As a result all original info gets dropped out of the fields. This problem did not occur each time the expense type was changed; only twice out of the 6 or 7 lines that the user changed.
Please advice.

Hi Folks,
resolved.
It is because of posting run mgt - prrw not executed. The documents are virtually posted to FI.
Thanks,
Nandagopal C

Approval of Expense report invoice

I'm working in R12 (12.0.6) and I have requirement create approval logic for invoice of type expense report.
I'm using AME but I found AP invoice workflow (APINVAPR) doesn't support invoice approval for expense report imported by cocurrent program.
My question Is there any way to overide this and allow approval (to make Approval Required)for expense report invoice imported through the Payables Expense Report Export Program ?
Edited by: user13482304 on Jul 11, 2012 12:02 PM

Hi
Invoices imported from iexpenses do not fall under the invoice approval. The idea is that the Approval process is implemented within iexpenses itself. So whtever approval requirement is there, it can be incorporated within the expense report approval AME. The approved expense report will create an AP invoice which has already passed through the AP invoice approval process (through the iexp approval AME process).
Hope this clarifies.
Vinit

INVALID PAY METHOD in expense report

Hi,
While running expense report, i am getting an error INVALID PAY METHOD. I have updated the payment method as per the suggestions from metalink and it didn't help either. Could anybody please tell me the steps how to resolve the issue?
Regards,
BS.

Hey Cheryl,
The script doesn't return any record.
I did the following setup before submitting expense report export program :
1. Navigate: Payables responsibility -> Setup -> Payment -> Payment Administrator -> Payments Setup -> Disbursement System Options -> Go To Task
2. Depending on your setup, choose the View Settings button for 'Enterprise Level' or 'Organization Level'
3. Choose Update button
4. For 'Default Payment Method', select 'Based Only on Payment Method Defaulting Rules Setup' or 'Override Defaulting Rules when Default Method Set for Payee'.
5. Choose Apply button.
6. Navigate: Payables responsibility -> Setup -> Payment -> Payment Administrator -> Payments Setup -> Payment Methods -> Payment Method Defaulting Rules -> Go To Task
7. For Oracle Payables, create a Payment Method Defaulting Rule for Employee Expense
a) Choose the appropriate Payment Method from the LOV
b) Give the Rule a Name
c) Payment Processing Transaction Type = Specify
d) Operator - Equal To
Type Name - Employee Expense
e) Leave all other fields as defaulted or change as required.
8. Choose Apply button
9. Retest the issue
10. Default the payment method at supplier level.
Regards,
Bharat.

Expense Report Export does not create Invoice in AP

Hello,
I have created several expense reports in AP (Running EBS R12, I am not using iExpenses), but when I use the Expense Report Export request, the invoices are not created. I have looked online and found some plausible solutions. None of them have worked: I've made sure the Employee payment method is set up; the Usage rules for payables are also set up for Employee Expenses in the payment processing transaction type. In the Payables Option screen, I have selected the Automatic Employee as a Supplier option.
Here's the Expense Report Export log:
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXEXPER module: Expense Report Export
Current system time is 29-APR-2013 11:09:53
**Starts**29-APR-2013 11:09:54
**Ends**29-APR-2013 11:09:55
Start of log messages from FND_FILE
Begin Receipts Management - Holds
Process Hold Each Scenario
Determine whether to place Holds
Process Hold All Scenario
Determine whether to place Holds
Process Hold BothPay Scenario
Determine whether to place Holds
Process Obsolete Holds
Obsolete Holds
Obsolete Both Pay Holds
Begin Processing Individual expense reports
Fetching expense report...
Expense Report Number : **110**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **REEMBOLSO 25ABR2013**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_ASTRID_EXPENSE**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_EXPENSE_AGSV**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **101**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Credit Card Expenses Fetched = 0
Credit Card Invoices Created = 0
Call Payables Open Interface
Expenses Fetched = 5
Invoices Created = 0
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 4105067
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-APR-2013 11:09:55
What else do I need to do? Am I missing something?
Thanks in advance,
Astrid

I found the answer and I am posting it here in case someone else needs it:
You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
Regards,
Astrid

Importing Expense Report from legacy to Oracle Payables??

All,
I need to import ER from legacy to payables. I used ap_expense_reports_headers_all & ap_expense_report_lines_all tables. But the "Expense Report Program" is not picking up the data from the tables though i populated all the required columns of the tables!!! When i open the "View Output" it says "The conc.request did not create an output file"!!!
Can anyone tell me what could be the reason behind the failure of the program?
Do I need to populate anyother column to resolve this issue?
Detailed response is highly appreciated.
thanks in advance,
Sen

Steps to import into AP
Navigate to the Accounts Payable Responsibility
Go to View -> Requests -> Submit a New Request -> Single Request -> OK
Submit the Expense Report Export Program, after specifying all the mandatory parameters
Source parameter should 'Oracle Internet Expenses'
To view the expense report created
Navigate to the Accounts Payable Responsibility attached to the User
Go to Invoices -> Entry -> Invoices
In the Invoice Workbench Window query the Invoice Num field with the Name of the Expense Report created in the previous step. The Invoice is displayed in the Invoice Workbench with the Type as Expense Report

Link Between AP Expense Reports and ap invoices tables

hi all
we create expense reports in AP then run the expense report import program to transfer them to the invoices
i know them through
the invoice number entered in the expense report and the invoice number in the invoices table
and the employee in the expense and the vendor in the invoices(through the employee table)
BUT,
some times we change the invoice number after the expense transfered to the invoice
i ask if exist relation columns between ap_expense_report_headers_all and ap_invoices_all directly?
thanks.

ap_expense_report_headers_all.VOUCHNO = ap_invoices_all.INVOICE_ID
Hope this answers your question,
Sandeep Gandhi
Omkar Technologies Inc,
Independent Techno-functional consultant

Unable to validate expense report invoice

Hello all,
Can some one please help me in resolving the below mentioned issues?
1) I am trying to validate an prepayment invoice for an employee expense report and its going on system hold with name No Rate and reason as "Invoice is not in functional currency and has no exchange rate"
Functional currency here is INR and the employee should get prepayment in US Dollar.
rates are defined in GL and also all the options looks good ion AP but not sure why iam unable to validate this invoice :(.
and the second issue is.
2) Have created expense report for an employee and have run the expense report export program but still the invoice did not get exported to invoice work bench.
Description of the report in view log is showing invoice fetched as 1 and invoice created as 0.
Can some one Kindly be of help and give the solution for the above mentioned issues?
Thanks in Advance.

Hi,
1.Please, follow these steps to solve the issue:
1) Be sure that an Exchange Rate Type and an Exchange Rate have been created between the invoice currency and the functional currency
2) Run the AutoRate concurrent program
3) Review the issue to know if it has been solved. Otherwise, please, provide the results for the APList diag script for the involved invoice to progress with the analysis.
2.please enable the payment method to your employee in supplier work bench.

Anyone have a refine edge/mask 'program error' failure?

Refine mask or edge constantly fails and reports a 'program error' dialog box after the OK button is pressed.
The file is small and my computer has the horsepower to handle it - Win7 64bit, I720, 12GB ram, and 100GB scratch disk space. Saphire ATI 4850 video 1GB ram. Tried disabling GUI acceleration no luck.
This has started after I did a reinstall of CS5 last week.
Searched Google and narry a mention of it.
And this was my most desired new feature in CS5. Everything else seems to be running fine with the exception of certain modified f keys (such a shift - f?) not working properly but this has been reported by others.
Larry

Chris,
My memory is a little fuzzy right now as to exactly what was causing the
problem. Anyway I don't encounter it much anymore.
If I remember correctly I had the mask attached to curves adjustment
layer and ran refine edges from there. Example I wanted to darken the
sky so I made a selection of the sky. The horizon had lots of trees
which needed the refine edge command to clean up. I ended up applying
the mask to the pixel based image and clipped the curves layer to it.
Same result as far as the adjustment goes but the refine edge command
worked with the mask attached to the pixel based image. So, if I
remember correctly, it was a non-pixel layer with the mask attached that
caused the problem. Maybe I was using Decontaminate colors which could
cause the problem on a non-pixel layer. Could be that it worked
sometimes because I did not use Decontaminate and failed when used.
Anyway, I avoid attaching mask to non-pixel layers if I am going to use
refine edge. Have not run into errors since, but then it could have been
fixed in 12.0.1 update. Or maybe the stars are aligned properly now. Who
knows?
Win 7 64 bit, 12GB ram, I720
Larry

PS6 - Program Errors under Win98 or WinME (and crashes with Magnetic Lasso)

Under Windows98 and WinME, many users are getting into a state where most commands report a program error and fail to function. This same problem can cause crashes in the magnetic lasso and magnetic pen tools.

Q: How do I stop the program errors?
A1: After they start, show the about box for any plug-in, then continue working.
A2: Select the Adobe PostScript printer driver as you default printer.
Details: many printer drivers on Win98 and WinME leave the CPU in a bad floating point state, and that bad state remains when Photoshop tries to use floating point code. Photoshop receives a floating point error from the CPU that it doesn't know how to deal with, so it reports a generic "program error". Showing the about box of a plug-in will reset the CPU to the correct floating point state. After that, everything should work -- until the next time you access anything about that printer....
Using the Adobe PostScript printer driver avoids the floating point state problem entirely.

Expense Report Expense Program errors in R12.1.2

Similar Messages

Maybe you are looking for