Expert Advice Needed on SSO and 9iAS

Hi All,
At work we are thinking of using Single-Sign-On
for authentication of all our intranet Applications.
We have used Oracle Portal which has SSO, but we don't really need Portal.
What I need to know is:
Does Oracle 9iAS contain SSO?
Do I need a Oracle Database e.g. Oracle 8 or oracle 9 to use SSO?
Can I implement SSO using just Oracle 9iAS and use it in my Java code e.g. JSP/Beans etc..
Thanks in advance for ANY help,
Barry.

Hi Barry,
Does this help you?
http://otn.oracle.com/ultrasearch/wwws_otn/searchotn.jsp?p_Action=Search&p_Query=single+sign+on&p_Group=4&p_Group=5&Search.x=11&Search.y=10
Good Luck,
Avi.

Similar Messages

Expert advice needed on Remodeling and line item Dimension

Hi All,
Scenario:
I have a cube 0FIAP_C03 for line Item. Now in this cube one of the dimensions u201CC036 -Document Detailsu201D is reaching the size of the Fact table. We are planning to use Re-Modelling and shift some of the characteristics like 0DOC_NUMBER - Sales Document, 0AC_DOC_NO - Accounting document number etc from this Dimension to another Dimension to reduce the size of this Dimension Table.
I have the following Questions:
1Will it be possible to add a new dimension and shift some characteristics from old Dimension to this new Dimension using remodeling( we donu2019t want to delete data from the cube)
2.what are the other feasible options to overcome the problem I have mentioned in my scenario( like Line Dimensions)
3.In case we can make this dimension as Line Dimension what other changes need to be made.
I am looking for a detailed explanation with all prou2019s and conu2019s, So kindly help me with your expert inputs.
Thanks,
Prafull.

Hi Prafulla,
Answers to your questions
1Will it be possible to add a new dimension and shift some characteristics from old Dimension to this new Dimension using remodeling( we donu2019t want to delete data from the cube)
No, remodelling wont work as per my understanding. ie You will have to delete and reload data
However, this also depends on the data in your dimension.....................................................
Consider the following example
Index(Dim-id).....Sales document............Sales Item............Accounting document
1......................1233456........................10.......................A123 .......end of record
2......................1233456........................20.......................A123.......end of record
3......................1233456........................30.......................A123.......end of record
Now suppose if you had to remodel the above dimension to move sales item to other dimension, then the dimension would appear as below................................................................................................
Index(Dim-id).....Sales document............Accounting document
1......................1233456.......................A123.......end of record
2......................1233456.......................A123.......end of record
3......................1233456.......................A123.......end of record
Now the problem is for the same combination of sales document and accounting document you should have had 1 row in the dimension, but you are having 3 rows(indexes) hence you are flouting the uniqueness for read and write operations to the dimension.. So logically this shouldnt be allowed...
However if your data in the dimensions is such that the uniquness of each row in the dimension is not disturbed, you could use remodelling.
You can try this in quality.
2.what are the other feasible options to overcome the problem I have mentioned in my scenario( like Line Dimensions)
I am not sure if I have understood your question. But I will still try to answer. If the dimension table has reached the size of the fact table then it is appropriate to consider remodelling.
Also you should consider embedding sales document and accounting document in the same dimension. Since there would be generally only one accounting document each sales document.
Use line item dimensioin as far as possible(restricted by number of characteristics). It reduces one step whie query since SIDs are directly present in fact table.. so you don't have to scan through dimension table.
Also have you considered archiving old dat not reported... It will reduce your dimension as well and improve performance...
3.In case we can make this dimension as Line Dimension what other changes need to be made.
-No other changes.
A safer option is to delete and reload data. Anyway remodelling also recommends a back up...
Its better to create a copy cube and use the copy cube/original cube for reporting until the other cube is getting processed to have minimal time of unreportable data.
Apologies .. Looks like the text in the post is loosing the format in which I typed hence the allignment is not correct..
Hope this helps,
Best regards,
Sunmit.

Expert advice needed: Why could I not connect to my own server after deletion of SSL certificate?

Issue: Could not connect to my own server after deletion of SSL certificate despite having SSL disabled
Hello,
I admit I am lay user with rudimentary SSL knowledge and I therefore messed up my certificates and I could no longer access my own server (Wikis, WebDav, Device Manager) with Safari. (error: Safari can't connect to server)
Eventually, I could resolve the problem but I do not understand why there was problem in the first place.
Maybe someone can explain that to me ?
OK, here is what I did:
I created a Certificate Authority because I wanted to use a free SSL Server certificate for our private server.
(I followed http://www.techrepublic.com/blog/mac/create-your-own-ssl-ca-with-the-os-x-keycha in/388 )
Despite several attempts I never got the server to accept the certificate for web services, the certificate was accepted for iCal, Mail and iChat but not for Web services. I tested an older certificate that was created when I set up the server and that that worked for all services incl. Web. So the problem was with my certificate only.
Out of desperation and lack of concentration I deleted the "original" certificate.
Now, I soon noticed that I could no longer log in to my server. I solved the problem by restoring the original certificate.
My question:
I had SSL disabled in the Server app settings. Why does Safari still look for a proper certicate ? (the server logfile had an entry that a .pem file could not be found which makes sense if the cert has been deleted)
I would be very grateful for an expert advice.
Regards,
Twistan

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Frame rates, judder, PAL and NTSC - expert advice needed please!

I have an NTSC high def camcorder. Because I live in England, I would prefer to make PAL DVDs from my home movies, if possible. My camera (Canon HF100) is AVCHD, and I thought this meant that once imported into iMovie, it was not 'true' NTSC. Have I misunderstood this? The reason I ask is that my recent iMovie 08 edits view perfectly on my Mac, but are slightly juddery when burned to a PAL DVD.
I have read on this forum about framerates, but I'm hoping the problem is still surmountable somehow. When I imported my footage into my Mac, I selected PAL even at that early stage, and all seemed to be well throughout the edit. The pictures and sound are perfectly synchronised, which I had heard could be a problem when moving between NTSC and PAL.
Do I really just have to go with NTSC all the way? Quite apart from its reputation for being Never Twice the Same Colour, it's not ideal if you're living in Europe because most TVs and DVD players are PAL.

the video standard conversion is no trivial task, a lot more than 'just' down-cascading 29.97 fps to 25fps (aside the 'unround' math, you have to convert resolution, color-schemes, etc) ... so, by any route it is IS a lossy process in terms of quality, or you use some 50k$ hardware
If your TV/DVD player supports it - stay NTSC ...
another route, I suggest when using iMHD6, is an export as dv-stream (NTSC) and using teh free app JES Deinterlacer for converting into dv-stream (PAL) ... JESDI does a better job, imho.
but...
the export as dv from within iM08 is again a lossy process, as we discussed early here at the boards.. so, you double the lossy process = no good idea.
stay NTSC...

Please Help Experts Advice Needed

I just bought ram memory, specifications (1024mb pc3200 400mhz ddr ram). When I installed the memory and powered up all I got was a beep sound and nothing else. Before I complain to the seller I need advice from any experts in this subject to tell me what could be wrong and how to fix it. I replaced the memory that came with the mac mini which is 256mb of ram but had to place it back in to work with my computer to find a solution to this problem. I read in mac addict that anything above pc2700 ram would be compatible with the mac mini. I have a mac mini 1.42ghz powerpc g4 any help will be appreciated.
thank u in advance for any help

Sadly, just because it's in spec, doesn't mean it will work.
Macs are EXTREMELY picky on RAM. The RAM itself may be good, but not compatible.

Advice Needed for Audio and MIDI Controller Software

I am hoping someone may be able to give me advice on how I should approach my problem.
I am currently running a live show with audio backing tracks and a small 12 par lighting system. The light system can be controlled via standard MIDI. I am using iTunes to play back sets of backing tracks, and manually controlling the lighting system using a dedicated foot controller.
What I would like to do, is be able to use software to simultaneously play audio files and perfectly sync the lighting (fades, shots, etc. via midi) with the audio track. Ideally, I would be able to have the audio/lighting paired as discreet entities that could be grouped into sets.
i.e.
Audio-MIDI_1 = Audiotrack1 would always be paired with Lightcontroller_MIDI_events1
Audio-MIDI_2 = Audiotrack2 would always be paired with Lightcontroller_MIDI_events2
Audio-MIDI_3 = Audiotrack3 would always be paired with Lightcontroller_MIDI_events3
I could the create a set of Audio-MIDI_x tracks which could be triggered in any order.
I would like to have to option to be able to activate a single track, or have a complete group of tracks activated sequentially (but be able to stop the and start the group as needed - you never know what will happen in a live situation). It would be nice to have a time-line UI as well.
Now the final requirement: it should be able to run on a PISMO PowerBook. <cringe>
I hope I am not too confusing.
I am thinking MainStage would not be the software for this task as Leo is not an option for the Powerbook.
I have looked at QLab and showcontrolpro, but I don't think theses are right for me either.
Any help or suggestions would be greatly appreciated.
TIA

Gary,
With a Pismo you really are confined. I've been using some software from Alien Apparatus called Solo Performer Show Controller (www.alienapparatus.com) and it has a timeline to sequence lights where you can run 32 channels of midi or dmx lighting. The only setback is it needs at least a 1 GHZ processor. There may be a company like Sonnet that has an upgrade for your processor.
The software is able to run backing tracks, send midi controls to effects units or other software, send hotkeys for apps, synchronize lyrics in a window or on an external monitor, controls a dmx fog machine, and also has a six button usb foot controller which can be configured for many things such as scrolling your songlist to select the next song, change volume of tracks, change a light scene, send a hotkey, trigger samples, etc. It is a bit pricey at just under 600 dollars but the foot control is durable, the company has excellent support and they listen to users to add features to the software.
Hope this helps
Thor

Advice needed on suitability and hardware requirements...

Hiya folks...
I'm after a bit of advice...regarding whether or not Aperture will be suitable for me, considering my current Apple hardware and my current "workflow".
I'm fairly new to digital SLR photography (hobbyist only)...but have had a variety of non-SLR digital cameras over the years.
I shoot in raw and jpeg, maybe about 100 shots when I go out (landscape and general outdoor shots mainly, some wildlife). After I have deleted the stinkers, I'm usually left with 30-50 decent shots that I keep...my iPhoto library has about 1000 images that I like, and I'm assuming that Aperture wouldn't have performance issues with a library of that size, on my hardware.
From the library, I create web galleries, print out to A3 (max...usually 8"x6", some A4) and create photo slideshows on DVD/CD media.
I've been using a mixture of iPhoto, Photoshop Elements 3, and Photoshop CS.
iPhoto for photo import and organisation ; Photoshop Elements 3 for raw image manipulation, and minor tweaks ; Photoshop CS for the bulk of image processing. (The raw images produced by my camera, a Nikon D50, are not supported with the Camera raw plugin for Photoshop CS.)
Having to utilise 3 separate programs does grate after a while...and ideally, I would like to use a single program.
Aperture sounded ideal, but the £350 price is a little steep for a program that I may end up using as "iPhoto-on-steroids".
An alternative would be to upgrade to Adobe Photoshop CS2...although I'm not sure whether my software would meet the upgrade criteria...my copy of Photoshop CS was purchased via eBay (authentic CD, box and manuals), but the serial number, I later found out after purchase, has been distributed on P2P networks.
The combination of Adobe Bridge, the raw manipulation and editing features would mean, similar to Aperture, potentially a single program to cover all my needs.
So my options are...
1.Purchase Aperture for £350, which may be unsuitable (overkill) for my use (although I'm sure that over time I would use its features more and more)
2. Risk paying £150 for a Photoshop CS2 upgrade that may baulk at my dubious serial number for the "original" Photoshop CS.
3. Keep with my current software workflow...but dropping Photoshop CS, as my conscience is shouting fairly loudly. I'd miss the curves feature, and be out of pocket to the tune of £125...but that's my fault for not assuming the eBay offer was too good to be true...
4. Any other alternatives...?
So...knowing my "workflow", usage and requirements...can anyone offer any advice?
Thanks for your time.
iMac G5 (20" Rev B) Mac OS X (10.4.3) 2GB RAM

Rob, I'll take a quick shot at this for you.
I'm fairly new to digital SLR photography (hobbyist
only)...but have had a variety of non-SLR digital
cameras over the years.
First, welcome to digital SLR photography.
I shoot in raw and jpeg, maybe about 100 shots when I
go out (landscape and general outdoor shots mainly,
some wildlife). After I have deleted the stinkers,
I'm usually left with 30-50 decent shots that I
keep...my iPhoto library has about 1000 images that I
like, and I'm assuming that Aperture wouldn't have
performance issues with a library of that size, on my
hardware.
You shouldn't have any performance problems with a library this size.
From the library, I create web galleries, print out
to A3 (max...usually 8"x6", some A4) and create photo
slideshows on DVD/CD media.
I've been using a mixture of iPhoto, Photoshop
Elements 3, and Photoshop CS.
Sounds pretty standard so far (except for using both Elements and CS).
iPhoto for photo import and organisation ; Photoshop
Elements 3 for raw image manipulation, and minor
tweaks ; Photoshop CS for the bulk of image
processing. (The raw images produced by my camera, a
Nikon D50, are not supported with the Camera raw
plugin for Photoshop CS.)
Pretty much the same thing I have done (only I use PS CS2 for everything). One note. If you are considering Aperture, I would strongly suggest that you put some samples of your images on a flash card and take them down to somewhere that has Aperture loaded and available for evaluation. Judge for yourself how Aperture handles your images. This is what I did with my D2X images and was happy with the results.
Having to utilise 3 separate programs does grate
after a while...and ideally, I would like to use a
single program.
Keeping in mind that Aperture was never meant to be a replacement for either Elements or Photoshop. It does offer some correction capabilities, but more along the lines of Adobe Camera Raw (though not as full featured.) Also, there have been a number of posts here where people have noted that the adjustments that they are making in Aperture aren't as good as with ACR. I can't see any difference on my system using my D2X files.
Aperture sounded ideal, but the £350 price is a
little steep for a program that I may end up using as
"iPhoto-on-steroids".
Again, I HIGHLY recommend you go somewhere where Aperture is loaded and you have the chance to use it yourself to see if it is indeed "ideal", before you buy.
An alternative would be to upgrade to Adobe Photoshop
CS2...although I'm not sure whether my software would
meet the upgrade criteria...my copy of Photoshop CS
was purchased via eBay (authentic CD, box and
manuals), but the serial number, I later found out
after purchase, has been distributed on P2P
networks.
This, I can't help you with.
The combination of Adobe Bridge, the raw manipulation
and editing features would mean, similar to Aperture,
potentially a single program to cover all my needs.
As I noted, I have CS2. I still use Bridge and ACR. In fact, prior to getting Aperture, Bridge was the answer to my organizational prayers, letting me easily sort through shots from a shoot to get the few I really wanted to keep. To me, adding Bridge and upgrading ACR in CS2 was worth the upgrade cost of the program.
So my options are...
1.Purchase Aperture for £350, which may be unsuitable
(overkill) for my use (although I'm sure that over
time I would use its features more and more)
True. But, you need to determine if it is for you now.
2. Risk paying £150 for a Photoshop CS2 upgrade that
may baulk at my dubious serial number for the
"original" Photoshop CS.
Again, I can't help you here.
3. Keep with my current software workflow...but
dropping Photoshop CS, as my conscience is shouting
fairly loudly. I'd miss the curves feature, and be
out of pocket to the tune of £125...but that's my
fault for not assuming the eBay offer was too good to
be true...
Your call.
4. Any other alternatives...?
Maybe someone else has one to offer.
Good luck.
Jeff Weinberg

Quick advice needed on Observer and Observable...

Ok at the moment i have about 10 sorting algorithms in 10 classes. They all extend another class which includes methods like print, randomise, user input etc etc which all sorting classes use. So basically my sorting classes only sort and nothing more is done in those classes.
Now what i want to do is have some statistics on a GUI. This will include copy coperations, compare operations and total operations. I will obviously need to input where these operations occur for each sorting class. I want the GUI to be updated each time an operation happens. All my sorts run in a thread, i did this so i can choose the speed of the sort with a JSlider.
My question is, will i need to be using the Observer and Observable interface? If so, can i have some advice into how i would structure this. If not, then how else can i do a statistics class. I tried a way without this approach, but it didn't seem too OO friendly. Any help is appreciated.
Thanks in advance.

I'm not a GUI guy and this is definitely not the best way to do it - but you could probably call an update method after each calculation or whatever. Make a static method that has a reference to your GUI form.
This is definitely not an elegant solution - but I think it's explicit and readable, and that can be more valuable than elegance.

Advice needed on Waits and Timeouts - 8i on HPUnix

I need some straight advice...We are running 8i on HPUnix. We have been tuning this thing for 6 weeks now and have most things under control (disk I/O, various cache hit ratios, etc.)...but...we still see a large number of waits...at least I think its a large number.
Question 1. If the instance has been up for 72 hours and I see a count of io done waits for DBW0 of 2,966,179 with 78041 timeouts (as an example), is this a large number? Nothing I have seen in the Oracle documentation gives me a sense of scale.
Question 2. What events do we have the ability to tune?
Question 3. For those that we can tune...how do you tune them?
Kurt
813 483 2153

I need some straight advice...We are running 8i on HPUnix. We have been tuning this thing for 6 weeks now and have most things under control (disk I/O, various cache hit ratios, etc.)...but...we still see a large number of waits...at least I think its a large number.
Question 1. If the instance has been up for 72 hours and I see a count of io done waits for DBW0 of 2,966,179 with 78041 timeouts (as an example), is this a large number? Nothing I have seen in the Oracle documentation gives me a sense of scale.
Question 2. What events do we have the ability to tune?
Question 3. For those that we can tune...how do you tune them?
Kurt
813 483 2153

ADVICE NEEDED Apple TV and Airport Express vs Cable company modem

In process of buying Apple TV and need some advice. I have a cable moodem and am wondering if I should use that for Apple TV or should I also purchase airport express to use with Cable modem. I currently do not have any airplay devices but might in future. Recomendations about setup would be great.

I suppose you could connect the Apple TV to your home network with a LAN cable...then have your PC wired to the same network...this would allow you to download movies, Netflix and YouTube from the internet to the Apple TV and also to play music from iTunes on your PC....but one of the things I really like about my new Apple TV is the interaction with iOS devices...it is great to mirror the desktop from an iPad 2, it is great to show pictures etc. from the same iPad...I think you'd miss a lot if you didn't enable wi-fi...it seems like you could setup a wi-fi access point in your home for a very modest cost, and just connect the downlink from the wi-fi network to the hub of your cable modem...or your ISP might have an integrated wi-fi system you can purchase...when you setup wi-fi on Apple TV, you just need to know the name(SSID) of the wi-fi network and any password you might have..it works great. The instruction book, though tiny, does a pretty good job of explaining stuff

Lenovo Z710 - Major Performance Problems - Expert Advice Needed

Three months ago I bought Lenovo Z710 laptop.
Here are some system properties:
Intel Core i7 4700MQ CPU @ 2.40 GHz,
8GB RAM
Hybrid 1TB + SSHD(8G),
NVIDIA GeForce GT 740M / 2 GB,
DVD-R,
Win 8.1
After using the device for 3 months I can't describe with words how dissapointed I am.
It is unbelievably slow. The device with this configuration should do very easily hard things.
However, I have troubles doning even simple things.
For example, currently I am only browsing web and listening music from youtube.
Opening a new web page in Chrome takes 30-40 seconds. Opening a new tab takes aprox. 10 seconds.
Selecting a text and copying it, takes 15 seconds. It is even very frustrating to type even a web address because of the obvious delay in typing. Furthermore, when I listen to music there is also a delay - that makes even listening to music unbelievably frustrating. Just to mention one more time - I only have chrome running!
I have 2 Partitions - C disk (442 GB) and disk D (488 GB).
On disk C I installed Win 8.1. and at the moment on disk C 391 GB are free.
I use disk D is mostly intended for storing images, movies, and music. On this disk 258 GB are free.
Regarding the programs I installed on top of Windows, here is the list: micro Torrent, Adobe Photoshop, Android SDK Tools, Android studio, Avast Internet Security, Brackets, Corona SDK, Dropbox, Foxit Cloud, Foxit Reader, Chrome, Greenshot, MS Office, Mozilla, Skype, Notepad, VLC Player, WinRAR, XAMPP.
When I open Task Manager I see that used CPU resources are aprox. 10%, Memory aprox 35%, Disk 2%, Network 5%.
I am the only user of the device.
In Task manager I read that only Chrome takes the most of the resources taking 130 MB memory.
So why is the device with 4 physical i7 Intel processory and 8 GB SSD so slow, that I can't even type without disturbance with delays?
I don't understand how the device with mentioned hardware can be so slow.
And regarding the software, I don't understand whtat could slow the device - I mentiond what programs were installed and to what extent are resorurces being used.
Please give me your advice on what else can I check and what shoudl I do.

Can you run a system health check once and see if anything is flagged? To do so,
1. Press the + R keys to open the Run dialog, type perfmon, and click/tap on OK.
2. If prompted by UAC, click/tap on Yes.
3. In the left pane of Performance Monitor, click/tap on Data Collector Sets to expand it, click/tap on System to expand it, right click on System Diagnostics, and click on Start. (see screenshot below)
4. It will collect data for 60 seconds before the system diagnostics report will be ready to view instep 3 of OPTION TWO below.
More information here
http://www.eightforums.com/tutorials/52013-system-health-report-generate-view-windows-8-1-a.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Advice needed about JFrame and JDialog (moved from java programming)

My main class in my application is a page where the user can choose to register or login. This class is a JFrame. If the user chooses to register, my register dialog is called up and the parent JFrame passed to the dialog:
private void btnRegister_actionPerformed()
new Register(this);
}Same happens for login. If the user chooses to login, my login dialog comes up and my main class JFrame is set as its parent. This is all fine because all the calling up is done in my main class, so i can just use 'this' to pass the JFrame.
Now here is my problem. If the user successfully logs in, they should have access to control some events. Now i am not sure if it will be ok to make this new events class another JFrame, as it is practically the start of a new section in my application.
Thats my first question. My second question is if i do make this events class a JDialog, is it bad coding not to give it a parent frame? Or would this be acceptable? My worries is passing the main class JFrame to a class which is only accessable by going through two other classes.
Cheers for the advice

It's Simple dude,
Advice: Use JIternalFrame, for your purpose.
And if u want to go with JDialog than u can do that in main method. Like when u call JDialog
Register dialog = new Register(this);Check for login in Register class or what ever u want. Create new method like success
private boolean isSuccess() {
return success;
} at Register Class. After Registeration change the variable boolean success value to true or false as per logic
And add
Register dialog = new Register(this);
if(dialog.isSuccess()) {
// Show loginDialg(this) or else
}Regards,

Help on 6337LE5..! expert advice needed

Hi,
i have a unit of 6337LE5 mobo . this afternoon, lighting strike my house and the power went off. However at that time my pc was not turn one. when i turn it on, after the memory count, it shows a error message ( your keyboard has been locked- please unlock the key)
i can't enter BIOS setting or windows it just freeze there. my keyboard is not functioning at all. i try anohter keyboard but it is still the same. I try to reset the BIOS by using the jumper, but nothing happen, the BIOS was not reset. The i try taking out the battery for 45 minutes, same thing no BIOS reset also.
i need help here....thankz alot. ;(

hi,
thankz for reply.
nope it doesn't get any further...the same message will be display but the mobo will detect that there is no key board present. means if i don plug in any keyboard, 2 error message will occur.

HTML forms Expert advice needed

How do I enable html forms to save and remember input data,
even if the browser is closed or if the user mover forward or
backwards through pages

Put the data into a database when the form is submitted - or
is that not
what you are asking?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mrharvey987" <[email protected]> wrote in
message
news:eks1d4$448$[email protected]..
> How do I enable html forms to save and remember input
data, even if the
> browser is closed or if the user mover forward or
backwards through pages

Expert Advice needed please.

Ok, so i have had over 30 phone calls to BT and after 6 weeks and a new contract i have exactly the same speed on my broadband as i had with my Old 20CN even now im on a new 21CN line.
For 3 years ive had about 6.5-7.0 MB download and 448 upoload.
I have now the same download and the upload is alot more near 1mb.
The only reason i need an explanation is i have had 2 engineer visits, on both occasions they stated that after a new contract and being put on the new 21CN network i should expect to get approx double my old speed , eg about 12 mb.
I had them check all my equipment etc, im connected directly into my master socket.
Ethernet cable etc.
I have had a stable connection at 6.5 mb for the last 11 days and i have just reset the Homehub(homehub 3) to see if it improved, it did go up to about 7mb.
I will list my details from the homehub below. I need someone to please explain why i cannot get speeds near my neighbours? I feel im being capped or is there another reason ??
Bear in mind i have just reset the hub after 11 days, i have had stable connections for sometimes 3 months without connection loss prior to this 21cn thingy.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:24:58
Downstream:
7.055 Mbps
Upstream:
1.125 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.1 dB / 6.1 dB
Line attenuation (Down/Up):
34.5 dB / 19.1 dB
Output power (Down/Up):
20.2 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
25 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
17 / 7
Error Seconds (Local/Remote):
20 / 0

You are only responsible from the master socket. When it enters your house, does it go via any intermediate connection blocks before it reaches your master socket?
The attenuation figure for 21CN equipment (ADSL2+) is calculated at a slightly higher frequency, so the loss tends to be slightly greater. Nothing to worry about, as ADSL2+ uses a much larger frequency range (up to 2MHz).
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Expert Advice Needed on SSO and 9iAS

Similar Messages

Maybe you are looking for