Expiration date and Price break date in blanket purchase agreement

Hi,
In Blanket purchase agreement i see expiration date and in price break i see the from date and to date, can some one tell me the difference between these two dates?
Issue
1.when i try to put an end date(expiration date) to one of the line i get this error message or when i try to cancel the po line by giving some reason it throws the same error.
The error
"You cannot cancel or finally close this agreement line because there are open purchase order lines referencing this document."
Regards
Sudharshan

Hi Sudarshan,
Expiration date under BPA is used to prevent ordering of the item after the date appearing in this expiration field. It will stop you to create new releases incase you are trying to create one after the expiry date of the BPA.
In short, If the item on the agreement has expired but already exists on an open release, you can still use the release. However, the expired line item will not be used for sourcing, and any future releases you create will not allow using the expired item.
Under Price Break, Effective from and to date indicates the validaity of Price break rule for a particular duration. This is restricted to Price break rule only.
Hope this will help.
Regards,
S.P DASH

Similar Messages

Purchased Item Data and Price list

Hi,
What are all the tables involved in retriving Purchased Item Master Data and Price List
What is the t-code ?
I need to get this data based on vendor.
Regards
Uday Kiran

Use tcode ME2L to fetch data based on Vendor.
Common Table used in Purchasing are EKPO-PO Item details
EKKO-PO Header details
EKBE-PO history
EKKN-PO account assignment details
Tcode to check SAP table SE11 / SE16
Regards
PK

Formatting by date and price

Hi I'm having a problem formatting a spreadsheet.
My spreadsheet has 10 columns and two of these are renewal date and price.
I need to format the spreadsheet so that any date before 30 September goes red; before 31 October - another colour; before 30 November - another colour and by 31 December - another colour.
Additionally, I need the spreadsheet to organise from the highest price.
Ideally it should end up that the earliest and highest price renewal should be at the top and the bottom should be the latest and lowest price (at the end of December).
Please can someone help (in simple terms as possible) as to how to do this!
Many thanks,
H.

Hi,
According to your description, we need to assign two different conditional formatting rules with column date and column price. Please see the below image:
===
Column Date Rule:
Format only cells that contain> Cell value less than 2014/9/1> Set format red
Format only cells that contain> Cell value between 2014/9/1 and 2014/10/1> Set format yellow
Create multiple rule based on your date.
===
Column Price Rule:
Format only top or bottom ranked values.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

What is Header level data and item level data? Please elaborate.

What is Header level data and item level data? Please elaborate.
Details:
EKKO is Purchasing Document Header; what is purchasing Document Header? who,what and where can i look for this data.
EKPO is Purchasing Document Item; what is Purchasing document item means?
what is item level data means?
When you take the Senario of SRM and ECC; where the purchase data is maintained primarily in SRM or ECC?
Thanks in advance. I will assign the points only to the valuable information.
York.

Hi York,
You are right in stating EKKO as header and EKPO as line item data. They are maintained in ECC.
Now for the details about the data:
In SAP every transaction is referred to as a document. In this case you are talking about a purchase document. Now what does purchaing document contain? I will contain information like: Who is the vendor? When was the transaction done? what was bought? What is the quantity of each item bought?
Whatever is applicable across the document is called header data... and what is applicable for each item is called line item data. In this case
1. Header data would be the vendor, date of transaction, purchaing organization ... etc.
2. Line item data would be the item details, the quantity of the item, the unit price of each item ...etc.
Hope this helps.
Best regards,
Kazmi

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

Month to Date and Year to Date Scenarios

<b>Dear SAP BI Gurus,
Can anyone please give me guidance how to create a Month to Date and Year To Date Scenarios (Variables perhaps?) for 0SRR_CF_C1? The date is in decimal and not DATE format Im assuming the reason for this is to get the Time variance. Nonetheless, Id like to create a MTD and YTD scenario for reporting.
Much Thanks
Philips Manalaysay</b>

Hi,
You should take a look at the blog and doc below.
/people/vikash.agrawal/blog/2006/10/17/enable-trend-reporting-150-by-manipulating-variable-value
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Regards,

I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad?

I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad? Can i change it without deleting it? Please help.

Delete the account on your phone. This will not delete any data on her phone or iPad, or data stored in iCloud.

PO creation Date and Invoice creation Date

Hi,
Can any one help me regarding which table I can look for PO creation date and Invoice creation date. I require these fields for my reporting requirement.
Thanks in advance,
Arvind.

Thanks for your response Bala.
I got the Table which I require. I have one more question on this.
Can you tell me Invoice Creation Date is RBKP-BLDAT(Document Date in Document) or RBKP-BUDAT(Posting Date in the Document) and PO creation Date is EKKO-AEDAT(Date on which the record was created) or EKKO-BEDAT(Document Date in Document).
Points already rewarded.

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

Goods issue date and goods receipt date

Hi Guys,
i was asked to display STO list.They asked me add goods issue date and goods Report date in the o/p columns.So any body can tell me what are the fields for goods issue and goods Receipt date's.?can u guys tell me the Tr code for these fields .?
Thanks,
Gopi.

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Process Order Basic Finish Date and Scheduled Finish Date

Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
Greg

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Difference between "Database Variant To Data" and "Variant To Data"

Can anyone tell me the differnce between the 2 VI's "Database Variant To Data" and "Variant To Data"?
I am using the database connectivity toolset and making a query.
I have tried using both, but the give me the same result.
Attachments:
Variant to Data.JPG ‏45 KB

You won't see a difference between these two functions with just a string or other simple data types. Where you'll see a difference is with clusters and more complex data types that come from the database. The variants returned by databases can be slightly different than the standard variant. That is where the Database Variant To Data is needed. Otherwise, if you are just reading string information, either function will work fine.
Crystal

Using attribute as a set of data and parsing this data

Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.

The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help.

How to stop scheduled ship date and scheduled arrival date from defaulting to sysdate

Hello,
We have a business scenario where we are deriving scheduled ship date and scheduled arrival date outside and then imported in the instance with the order. However we find that the scheduled ship date and scheduled arrival date are defaulting to sysdate. The atp flag is set to N for these items. I have checked the defaulting rules, there is no such defaulting rule set for scheduled ship date or arrival date ( screenshot attached) Please share your thoughts on how can I stop scheduled ship date and arrival date date from defaulting to sysdate ?
Thanks
Rajesh

Hi
Please visit following link. It may be useful.
How to prevent auto default of schedule ship date in sales order form
HTH
sd

Basic Start Date and Schedule Start date

Dear All,
In a Preventive Maintenance order generated through IP30, I am getting Basic Start Date and Schedule Start date as different dates. For all other orders those date as coming same. I am using forward Scheduling. Can any one of you please tell me what would be the problem?
Regards,
Babu R

[SAP Note on Scheduling - Note 45433|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=45433]
Regards,
Maheswaran.

Expiration date and Price break date in blanket purchase agreement

Similar Messages

Maybe you are looking for