Process Order Basic Finish Date and Scheduled Finish Date

Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
Greg

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Similar Messages

Basic Start Date and Schedule Start date

Dear All,
In a Preventive Maintenance order generated through IP30, I am getting Basic Start Date and Schedule Start date as different dates. For all other orders those date as coming same. I am using forward Scheduling. Can any one of you please tell me what would be the problem?
Regards,
Babu R

[SAP Note on Scheduling - Note 45433|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=45433]
Regards,
Maheswaran.

How to stop scheduled ship date and scheduled arrival date from defaulting to sysdate

Hello,
We have a business scenario where we are deriving scheduled ship date and scheduled arrival date outside and then imported in the instance with the order. However we find that the scheduled ship date and scheduled arrival date are defaulting to sysdate. The atp flag is set to N for these items. I have checked the defaulting rules, there is no such defaulting rule set for scheduled ship date or arrival date ( screenshot attached) Please share your thoughts on how can I stop scheduled ship date and arrival date date from defaulting to sysdate ?
Thanks
Rajesh

Hi
Please visit following link. It may be useful.
How to prevent auto default of schedule ship date in sales order form
HTH
sd

Basic start date and scheduled finished date...can we have Planned date?

Is there any "Plan Start Date" in SAP, the date where scheduler must put manually in the system to determine the "committed" date for the work to be executed - based on earliest and latest start date which automatically calculated by SAP?
Our plant must keep the Basic Finish Date unchanged since it is the Required Date of the Work to finish. We found that the Plan Date does not change and I was wondering if there is any way we can have the Planned date on the order header or have the basic finish date unchanged?
Appreciate your advices

Hi
As per your query screen variant is the better option to be choose so that here you can go with user id based restriction
Attaching the complete the scenario
Transaction and Screen variants with an Example
http://scn.sap.com/docs/DOC-39667
Try these document & try to configure if you have any further please revert back.
Thanks & Regards
Sandeep Kumar Praharaj

Process Order Schedule Finish date before Schedule Start date

On rare occasions, the process order Schedule Finish date is before the Schedule Start date. This causes an error on the APO system when the process order is CIF to APO. Does anyone have any ideas how this occur?
Thanks.
Best regards,
Sandy

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

Early schedule start date, early schedule finish date

I want early schedule start date, early schedule finish date and project cost plan in my report. This is a PS requirement. In the standard cube (0PS_C02) I can find actual start date and actual finish date. Has anybody used early schedule start date and early schedule finish date in the reports? If yes then did you get it using standard cube/ODS or you went for enhancement?

HI,
He have to go for few tables in which u can find all the data.
Firstly u have to enhance the datasource .
First go to table AFKO here you insert AFUNR (Order Number) this table you will get AUFPL .
Then take AUFLP and go to AFVV table and insert AFUPL . you will get all the activites and all dates of each activity for example early start date ,early finish date, foirecost date etc.
Thanks and Regards
Dinesh

Is it possible to pre-order the iPhone 5 and schedule pick up at an Apple Store on 09.21.2012?

Is it possible to pre-order the iPhone 5 and schedule pick up at an Apple Store on 09.21.2012?

and by the two week shipment means delivery on October 5th.
I knew I should of stayed up and ordered my phone.

What are Header Level, Item Level and Schedule Level data?

Hi ,
Can anyone plz explain me what are Header Level, Item Level and Schedule Level Data in the R/3 system , means what actually is the data structure they contain. If is there any document or links available plz do send. Urgent.
Thanks
Prashant singhal

Hi Prashant,
check this link.
[Extractors;
Regards,
Harold.

Creating Process Orders Without a Material and Without a Master Recipe

Hi PP experts, anyone knows if it is possible and how to do create Process Orders Without a Material and Without a Master Recipe?
Thanks!!

Dear,
If you want to use a cleanout recipe
T code CORO
create a order w/o material for rework qty
Make the same entries as described under Creating a Process Order With a Material. Use OPJG config to have a default operation defined for the plant and order type combination.
Please find the required details and conditions for creating process orders without master recipe.
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
Regards,
R.Brahmankar
Edited by: R Brahmankar on Oct 13, 2008 5:12 PM

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

Diff bet invoice date and Invoices list date

Hello Experts.
Good Morning to all.
1) what is the difference between invoice date and invoicing list dates, please telltheir signigficance and why they needed in customer master billing tab.
2)what is the use of the field Payment guar proced field.what actully is its purpose.
3)Subsequent invoice processing:- It indicates if the invoices for manual
post processing should be printed out.If the business wants to post invoices manually(not
by system automatically) that invoice can be printed out.
In the above sentence what does manual posting means and what is automatic posting means?
And tell me is there will be any need for this field in the real time , if so , then in which case?
Thank you for all the replies..

Dear SD Beginner,
These fields will be used to assign the calendars that determines the schedule of billing dates and invoice list for the customer.
Invoice dates (calendar identification)
Identifies the calendar that determines the schedule of billing dates for the customer.
Use
If, for example, a customer wants to consolidate the invoices you send out, you can predefine the billing schedule in a calendar in the system. During billing, the system automatically proposes the appropriate billing date from the calendar.
Procedure
The system proposes the billing schedule from the customer master record of the payer. You can change the value manually in the sales document.
Invoice list Dates (calendar identification)
Identifies the customer's factory calendar that is used during the processing of invoice lists.
Use
An invoice list is a list of invoices (single or collective) that you create for the customer either periodically or on predefined dates. The periods and dates are defined in the customer's factory calendar. Typically, the recipient of an invoice list takes on the responsibility for collecting payments from numerous individual customers and receives a factoring or del credere discount for the service.
Procedure
If you want to create invoice lists for the customer, you must enter an identifier for a predefined factory calendar.
Requirements
You must first define a factory calendar for the customer either in Customizing for Sales or as part of the master data for Sales (Menu path: Logistics -> Sales & distribution -> Master data -> Others -> Billing schedules).
I hope this will help you,
Regards,
Murali.

Using attribute as a set of data and parsing this data

Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.

The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help.

Java.sql.Date and java.util.Date - class loaded first in the classpath

I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????

I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work.

Process Order Basic Finish Date and Scheduled Finish Date

Similar Messages

Maybe you are looking for