Explain ABAP program

Hi guys,
Is there any document avalable which explains the ABAP program which the extractor 2LIS_03_BF uses so as to extract material movements.
The program name is RMCBNEUA.
Regards
Ankit Harish

HI,
Refer to the link.
Using 2LIS_03_S196
This might help.
Regards
Sumit Agarwal

Similar Messages

Unable to resolve the exception READ_REPORT_LINE_TOO_LONG in Abap program.

Hi,
I am getting the exception READ_REPORT_LINE_TOO_LONG in my abap program.Given below is the full analysis of the exception and then the program code :-
Error Analysis :-
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZANI_TEST_INTERACTIVE_ALV" from the
database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
91 characters wide.
Program Code :-
*& Report ZANI_TEST_INTERACTIVE_ALV
REPORT ZANI_TEST_INTERACTIVE_ALV.
TABLES: LFA1.
TYPE-POOLS: slis.
DATA: it_lfa1 TYPE TABLE OF lfa1,
      wa_lfa1 TYPE lfa1,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE input.
SELECT-OPTIONS: acc_no FOR LFA1-LIFNR.
SELECTION-SCREEN END OF BLOCK input.
START-OF-SELECTION.
IF NOT acc_no IS INITIAL.
    SELECT * FROM LFA1
      INTO CORRESPONDING FIELDS OF TABLE it_lfa1
      WHERE LIFNR IN acc_no.
ELSE.
    SELECT * FROM LFA1
      INTO CORRESPONDING FIELDS OF TABLE it_lfa1.
ENDIF.
PERFORM form_build_fieldcatalog USING 'IT_LFA1' CHANGING it_fieldcat.
PERFORM form_display_alv USING it_lfa1 it_fieldcat.
*&      Form form_build_fieldcatalog
      text
     -->P_0058   text
     <--P_IT_FIELDCAT text
form form_build_fieldcatalog using    p_it_tabname TYPE slis_tabname
                              changing p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME               = sy-repid
      I_INTERNAL_TABNAME           = p_it_tabname
    I_STRUCTURE_NAME             =
    I_CLIENT_NEVER_DISPLAY       = 'X'
      I_INCLNAME                   = sy-repid
    I_BYPASSING_BUFFER           =
    I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = p_it_fieldcat
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
      OTHERS                       = 3
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " form_build_fieldcatalog
*&      Form form_display_alv
      text
     -->P_IT_LFA1 text
form form_display_alv using p_it_lfa1 LIKE it_lfa1 p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = sy-repid
    I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    I_CALLBACK_TOP_OF_PAGE            = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    I_CALLBACK_HTML_END_OF_LIST       = ' '
    I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      =
    I_GRID_SETTINGS                   =
    IS_LAYOUT                         =
      IT_FIELDCAT                       = P_it_fieldcat
    IT_EXCLUDING                      =
    IT_SPECIAL_GROUPS                 =
    IT_SORT                           =
    IT_FILTER                         =
    IS_SEL_HIDE                       =
    I_DEFAULT                         = 'X'
    I_SAVE                            = ' '
    IS_VARIANT                        =
    IT_EVENTS                         =
    IT_EVENT_EXIT                     =
    IS_PRINT                          =
    IS_REPREP_ID                      =
    I_SCREEN_START_COLUMN             = 0
    I_SCREEN_START_LINE               = 0
    I_SCREEN_END_COLUMN               = 0
    I_SCREEN_END_LINE                 = 0
    I_HTML_HEIGHT_TOP                 = 0
    I_HTML_HEIGHT_END                 = 0
    IT_ALV_GRAPHICS                   =
    IT_HYPERLINK                      =
    IT_ADD_FIELDCAT                   =
    IT_EXCEPT_QINFO                   =
    IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
    E_EXIT_CAUSED_BY_CALLER           =
    ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = p_it_lfa1
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " form_display_alv
Please suggest a solution for this problem.. Thanks in advance.

hi,
it is getting because of fieldcat hear ur internal table is having all fields in lfa1, lfa1 is having more fileds alv cont display that much fields at a time . for that u are getting that messgae . u can solve this problem by filling fieldcat table manuvally insted of by FM 'fieldcat_merge'. fill filedcat table some fields which are need to display by manuvally.
thanq,
rajesh.k

ABAP program to Cancel messages in Scheduled/Recorded status?

Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
Mark

Messages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK

How to find the start condition of a ABAP program?

Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
Dinakar

Hi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK

RRi for query using ABAP program

For a report, we are using RRI (jump to target) functionality to see invoices in R/3 system using an ABAP program. I do not have much idea on R/3 systems how invoices are setup in R/3 Dev, test and prod. The ABAP report is done by a backend person. I need to place that in RSBBS. Here, my doubt is that do we need to follow the same procedure for this to move it to production system i.e, first create that RRI and ABAP in respective dev systems and transport both to test and then to Prod? Could anyone please explain me the steps on how this will work in real-time?
Points will be assigned.
Thanks

Hi,
I am not able to find how the two reports are conncted.
You can check in RSBBS t-code. RRI will be defined here to jump from One Query yo another and many more options.
My work is to copy the parent query a nd do some modification to it. Please let me know how to check and achieve that.
You can do this BEx Query Designer itself.
Regards,
Suman

CONVT_NO_NUMBER Dump error in Process Chain Abap Program

Hi Experts,
The daily running process chain is failed at ABAP program with the error CONVT_NO_NUMBER.
The reason for the exception is:
The program attempted to interpret the value "40-799" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
I am not familiar with ABAP.
Please suggest me how to proceed..
Thanks
<BMP>

Hi,
In ST22
Short text
    Unable to interpret "40-799" as a number.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
     caught in
    procedure "FM_DIR_LIST" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program attempted to interpret the value "40-799" as a number, but
    since the value contravenes the rules for correct number formats,
    this was not possible.
I am trying post the code but SDN is not accepting more than 15000Char's
So can i get ur (mail) details
So that i can send u the exact code...
Thanks,
BMP

Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

Call an ABAP program or a function module from command prompt/python script

Dear All,
I want to call a function module/ABAP program from command prompt or a python script.
Let me explain with an example.
There is a function module "z_add" that takes two integers as input parameters and generates their sum.
the sum is the output parameter.
Now i want to call this function module from command prompt / python script and pass parameters to this function module.
In return i must get the sum(i.e. the output of function module).
I tried using STARTRFC ,was able to call the FM but could not get the return value(output) from FM.
Can you please provide me the code of such a function module and the method to call it thereby passing parameters and getting the sum.
Thanks and regards,
Gaurav
Edited by: gauravkec2005 on Mar 4, 2010 7:41 AM

thank you both! helpful answers! :o)
anyway!
i have written the program which is called from the SAPScript:
    /:       PERFORM GET_VATNUMBER IN PROGRAM ZFI_F140_OPERATIONS
    /:       USING &BKPF-BUKRS&
    /:       CHANGING &VATNUMBER&
    CE       VAT Registration No : &VATNUMBER&
    REPORT zfi_f140_operations.
    FORM get_vatnumber TABLES in_par STRUCTURE itcsy
                              out_par STRUCTURE itcsy.
      DATA: lv_co_code TYPE bukrs,
            lv_vat_no TYPE stceg.
      READ TABLE in_par WITH KEY name = 'BKPF-BUKRS'.
      MOVE in_par-value TO lv_co_code.
      SELECT SINGLE stceg FROM t001
        INTO lv_vat_no WHERE bukrs = lv_co_code.
      out_par-name = 'VATNUMBER'.
      WRITE lv_vat_no TO out_par-value.
      CONDENSE out_par-value.
      MODIFY out_par INDEX 1.
    ENDFORM.
it is not working and i cannot work out why...
i have not been ABAPing for very long but have had a go....
any thoughts as to what i have done wrong?
or point me where i should be looking? thank you!

Client export for ABAP programs, repository objects cross client objects

Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank you

You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael

Settings in Process maintenance :ABAP program

Hello Xperts,
I have added ABAP program to one of the process chains in RSPC.
I want to know what are the settings I have to check...I want the call mode ASYNCHRONOUS..
Can any one explain what are CALLED FROM and PROGRAM TO CALL tabs.(what I have to give there?)
I already added RSPC_ABAP_FINISH in my ABAP program(written in SE38)to make the events trigger one after other.
Any answers are always appreciated
Thank You,
JB

Hi
Use Local for 'Call From'.
Program to call:
if u want to call directly to the program use 'Program'
if you want to triger a batch job use 'Scheduled Program' by stating the event, that u put in the job in SM37.
Reg's
Edan

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

Hi , friends pls explain abap mapping and message mapping

1) pls explain abap mapping and message mapping
send me screen shorts also.

Hi
Mapping Techniques
XI provides 3 standard ways of interface mapping between source and target.
Graphical mapping
Java Mapping
XSLT Mapping
Two more additional mapping types can be activated in XI by making changes to the exchange profile. Those two mappings are
ABAP mapping
XSLT mapping with ABAP Extensions
Graphical Mapping
Graphical mapping is a common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It hardly involves coding. (Exception - User defined functions). But sometimes with graphical mapping it is difficult to produce required output. For example ... text/html output, namespace change, sorting or grouping of records etc.
ABAP Mapping
A person comfortable with Object Oriented ABAP can go for ABAP mapping instead.
Java Mapping
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
XSLT Mapping
One can also think of Java mapping as another option but it is a bit complex and required knowledge of Java. In such cases, XSLT mapping can be the best approach to meet the requirements.
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)\
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
Different types of Mappings
MAPPING SUPPORTED BY XI
Message Mapping -> Graphical Design and testing environment. Default Provided By XI. Queue based modelling allow handling or large documents. Extensible via user defined functions
XSLT Mapping - > Based on openstandard, Portable across application platform, Extensible using user defined functions kewl but disadvantage is Memory overload while handling large documents.
SAX -> Simple Api For XML. -> Allows you to parse through a XML document. Doesn't consume any memory. But the message can be parsed only once from top to bottom. It Has evolved by contributions made by group of ppl itz a open architecture.
DOM -> Document Object Model -> Itz designed by W3C. Consumes Memory as the message will be loaded. Allows parsing of document in both way top down and bottom up.
Send me your email id.Shall send you very good docs for both ABAP Mapping and message mapping.
Thanks

Triggering a background job of class 'A' from within the ABAP program

Dear All,
We are implementing SAP ECC 6.0 on IBM System i, i5/OS V5R4, SAP kernel 7.00, kernel patch level 173.
Is there a way to control that when a background job is triggered from within an ABAP program using the : CALL FUNCTION 'JOB_OPEN' statement, the background job is of class A ?
I know that through transaction SM37, the job class for a background job can be changed manually, but the situation is an outsource company did for us some changes in the native SAP ABAP programs related to some SAP native transactions, and those programs trigger at their end some background jobs, each job running with the name of user running the transaction.
Through SM37, I can't find a template background job, to be changed to have class 'A'
The following is an excerpt from the ABAP code, bearing the CALL FUNCTION 'JOB_OPEN' statement :
FUNCTION z_cs_technical_completion.
""Local Interface:
*" IMPORTING
*"     VALUE(AUFNR) TYPE VBRP-AUFNR
DATA jobcount TYPE tbtcjob-jobcount.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname                = 'CS_TECH_COMPLETE'
SDLSTRTDT              = NO_DATE
SDLSTRTTM              = NO_TIME
JOBCLASS               =
   IMPORTING
     jobcount               = jobcount
CHANGING
RET                    =
   EXCEPTIONS
     cant_create_job        = 1
     invalid_job_data       = 2
     jobname_missing        = 3
     OTHERS                 = 4
SUBMIT zcs_technical_completion
          WITH p_aufnr EQ aufnr
            AND RETURN
          VIA JOB 'CS_TECH_COMPLETE'
          NUMBER jobcount.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = jobcount
      jobname              = 'CS_TECH_COMPLETE'
      strtimmed            = 'X'
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      invalid_target       = 8
      OTHERS               = 9.
ENDFUNCTION.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Dear Darren,
Thank you very much for your cooperation and for your prompt reply.
Could you please explain to me how to find out the template background job that was first used, or in other words, how things were set up in the first place, i.e. when first the ABAP program was written and executed, there had to be at least one background job created through transaction SM36 ?
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

PHYSICAL FILES FOR ABAP PROGRAM

hi friends
i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
we have ECC 5.0 on AIX & use oracle 9i.
thanks in advance.
regards.

imran mohd wrote:
> hi friends
>
> i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
>
>
> we have ECC 5.0 on AIX & use oracle 9i.
>
> thanks in advance.
>
> regards.
The code you write in ABAP is not stored on OS-level (at least not in an ABAP-stack system) - it's contained in the database. As for the 'copies' your management wishes (for some ambigous reason) to have - there's no need. The code you write is versionised, so that every change made to the code is automatically documented when you press 'Save'.
That was answering a 'basic' question - but you have made me very curious now: would you mind to explain why you would want a 'copy' of your custom code on OS-level? Any special reason??
Edited by: Mylène Dorias on Jun 9, 2010 1:37 PM typo

About: how to abap index in abap program.

Dear expert,
I find a question that what's the meaing of these declaration "%_hints oracle 'INDEX(RESB"Z01")" in abap program.
Can you explain it to me?
Best wishes.
George shi

Hi,
this forces the oracle database to use index Z01 of table RESB when processing the select statement. If you do not add the hint, the optimizer of the database decides which index to pick. In some cases, the automatically chosen index is not the best one.
Please also refer to http://www.hotcoding.com/dbs/oracle/35430.html for a more detailed explanation.
Kind regards,
Thomas Langen

Explain ABAP program

Similar Messages

Maybe you are looking for