Explosion after 1 month of use...(USB Charger + Lighting Cable

Hello
I had a BIG luck today for my new iPhone...
I have connnected and plugged to the USB charger the Lighting Cable, and put it to the mains, after 3 seconds heard and seen explosion and all became black at the connecting point...by luck i did not connect iPhone itself..
Use my original ONLY accessories since the date of purchase of IP5...19 Jan. 2013.
My MacBook Pro is connected to the same point...all is safe, but this...
Need to go to the shope to exchange the cable and USB charger...called them already...: "Apple Products are never get to this..., we will give you a replacement...as we do not have original ones..."

Can you try eBay for the docking cables, since you sound like a cable destroyer.
I think on eBay, the cables are less than €9 or if from some Oriental countries less €1 which maybe where your fragile cable comes from.

Similar Messages

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

Want to return my iPad mini after 3 month of use

I want to return my iPad mini after 3 month of use. Is it possible to sell it back to apple store and get something else?

Your only option is to sell the iPad and buy a new one.
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
 Cheers, Tom

15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

15"Macbook Pro shuts off after 5 minutes when using full-charged battery. If not touched, computer stays on. But start typing, it shuts off. Was told this was a fan problem. Had fan replaced last spring. But problem has begun again. Is this a battery issue or somethig else?

Charge Information:
Charge remaining (mAh):          3747
Fully charged:          Yes
Charging:          No
Full charge capacity (mAh):          3899
Health Information:
Cycle count:          90
Condition:          Good
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          12382
It says it looks fine....

After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a messag

After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED. After some months of use my MBP died. I got it checked in Apple verfied Service centre and was told that logic board was to blame

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED.
After some months of use my MBP died outside USA. I got it checked in Apple verfied Service centre and was told that logic board was faulty.
After I came back to US I took my MBP to Apple store and was told that there is liquid damage in the system. My question is that if there was liquid damage why did my MBP stop displaying the battery status right after the battery was changed secondly why didnt the apple verified Service centre tell me that there was liquid damage afterall I paid them the money for diagnosing the problem.
Is there a process i can followup on this problem

These are question you would need to ask that service center.
This is a User to User forum. No Apple employees here.

Start-up problem disappears after several months non-use? Real?

Old Satellite laptop suddenly would not complete start-up when turned on ---- this was more than 18 months ago. So I stopped using it, charged the battery and left it for 18 months. NO usage for 18 months; maybe the battery drained during this time, maybe not.
When I then took laptop to a diagnostic technicianafter those months of non-use, the computer started-up with NO PROBLEM. (I actually do not remember if I recharged the battery just before taking to the diagnostic servicer or not).
Was the nonusage for several months and battery drainage meaninful or not? Would this be just a temporary unknowable problem which disappeared? Since starting the computer several times to try, the computer still starts normally and the only problem I can observe is a stress in the CD drive upon trying to use certain CD's; otherwise, the computer still seems to be working normally, and shows no trouble in start-up.
I do not understand.

Dbrown and others interested,
Here are the basic details:
Laptop Satellite 1415-s115, purchased new in year 2003, Windows XP Home Ed., S.P. 1.
In use a few times per month for about 2 to 2 and a half years. Used for dial-up internet, transferring and copying files, putting onto CD's, and some use for software development. Then, almost daily use from 2006 to mid 2008 for wireless internet use and sometimes transferring and storing files, putting files onto CD.
Suddenly in late spring, 2008 Start-Up would not finish when I turned on computer. After each and every attempt, 15, 20, more minutes, startup was still not finished. In this process, the computer was useless.
Retail technician began an initial try to startup in the retail shop and gave, after various aimless discussions, that testing would take a few hours to do thoroughly and the cost for diagnosis would be ~140 dollars - before any repair attempt. So, at that, the computer was still useless, and our decision was to just store the apparantly dead computer at home, and buy a new laptop computer.
Early summer 2008 through late autumn 2009, I used the new laptop computer, now at Windows Vista on a different model Satellite laptop.
A day in late autumn 2009 --- Let me find what an authorized Toshiba service technician can tell me from his diagnosis! I explained the problem to him. After a couple of minutes, he showed me the old laptop was fully started-up, showing no problem. He said "play around with it a little"; so I did play around with it a little and found no problem. Then, remembering the difficulty from 18 months earlier, I said, do a diagnosis to be sure. He ran tests overnight for several hours. I then was able to pick up my old laptop the next day and he found NO problem during the diagnostic tests. He turned on the computer again and let me play around with some of the programs to see for myself.
Since bringing the old laptop back from the authorized toshiba technician, NO REPAIR NEEDED, I have started it up about two or three times per week and have done a few things and find NO problem with startup and nearly no problem with anything...... just one difficulty with the optical disc CD drive when I put in certain CD's; either something about the paper labels which I used, or something about a CD-R being recorded as "Open" instead of "Closed", ... I'm not yet sure. Those certain CD's seem to suddenly cause a motor noise and the machine becomes extrreeeeeeeemmely slow responding --- only with certain CD's, since most do not seem to cause this particular problem. (These same certain CD's seem to cause some difficulties when I try to read them in another old, desktop machine).
(In case readers in this thread are interested, just two days ago, I updated to XP S.P. 3 on the old laptop)
Well, so tell me what you can think is most meaningful

Dreamweaver CS4 serial number invalidated after 8 months of use

In January 2nd 2014, I purchased an OEM version of Dreamweaver CS4 for Windows from a reseller called "Smart Shop" which looked like a serious outfit [emails from Jet Support were received with a link to "Access your order and customer support http://appscustomerscare.com"]. A serial number was obtained. I downloaded the program from their site and installed it without any problem: When I launched the application, the serial number was inserted and the Adobe server validated it: the application worked seamlessly for more than 8 months.
Yesterday, when I launched Dreamweaver CS4, a dialog box showed up stating the the serial number used was invalid! I used the serial number that I had been given to activate Dreamweaver but the form showed a red X at the end of the serial number meaning the the serial number was invalid.
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
Now, I'm back to the trial version (available for 29 more days)!
Is there a licensing problem link with buying an OEM version of Dreamweaver from resellers?
Why was the serial number considered valid on first run and all successive runs and then invalidated after 8 months?
How can I be sure that my next "bona fide" purchase of Dreamweaver won't run into the same problem?
Is there a way to recognize good from bad resellers?

Sorry you got nailed - Next time try this
http://www.adobe.com/cfusion/partnerportal/index.cfm
Some info about appscustomerscare
http://www.scamadviser.com/check-website/appscustomerscare.com

I charge my I shuffle using USB charger for my I pad, now it won't charge but it will charge a different I shuffle

i cannot charge I shuffle, I use USB Port from I pad , I can charge another I shuffle, but not this one any more

Start by reading through http://support.apple.com/kb/TS2634
Are the charger nd cable original Apple parts or third-party? There have been a lot of problems ith third party cables and chargers since iOS 7 - checks for compatibility with Apple specs.
Try another charger and cable to see if that makes a difference.

Does anyone have problems with the lightening to USB cable when charging from an outlet? After 6 months of use, it seems to wear out as a result of twisting caused by using the iPad while charging?

Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
If so, am I doing anything wrong?

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

E4200v2 bricked after 1 month of use.

I purchased an e4200v2 to replace my old WRT160n which I have been using for years with no issues. Last night the e4200 crashed on me when I went to reset the router I noticed the CISCO light was blinking very slowly and I had no network connection. I power cycled the router and still no connection so I hit factory reset button. Nothing happened. Did a 30/30/30 reset nothing happened. At this point I have a 34 day old plastic brick on my desk and I'm back to using my old WRT160N. Any advice on how to unbrick this router?

Hi. Try the steps below. I found this one online but I cannot remember anymore the link.
Reboot the router three (3)times to restore to its last known working firmware.
Step 1: Reboot the router by pulling the power cable.
Step 2: Power ON the router and observe the Cisco LED until the light becomes solid.
If the light is not stabilized after 60 seconds, repeat Steps 1 and 2.

Help Needed ASAP! Xcelsius demands Activation after 11 month of using it..

have been using Xcelsius4.5 for almost a year, for some reason, it asks me to Activate since 2 weeks. After using 5 times without Activation, XCelsius stopped allowing me to use it again. I reinstalled it, it still doesn't work.
My company paid for the licence, and it is not expired yet!! There is no reason that XCelsius asks me to reactivate..
Please call 614-854-5163 to help!
Wen

Hi Wen,
I responded to your other post, your license does not expire. Please respond to the email I sent you and I will assist you with this.

CS6 asking for serial key after 18 months of use

I purchased DW CS6 through the education scheme and have been merrily using it for 18 months. Yesterday tried to load it an it's asking for a Serial number of go to a free trial. I have read the forums and this is a common problem. How do I solve this? If not can I get a refund? I also do not have a serial number on the packaging, rather a Product Code.

Hello Belinda,
this sounds very strange and so you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account https://www.adobe.com/account.html >>> see My productsView all >>> These registered products are associated with your Adobe ID. >>> Name >>> Serial number. And to find your serial number have a look there http://helpx.adobe.com/x-productkb/global/find-serial-number.html >>> I lost my serial number >> see comment.
The last time Adobe suggests so too this https://helpx.adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing- activation.
If your problem persists, please click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for my part had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

My msi Z77A will not boot after several months of use

So I've had this pc build for about 7-8 months. The motherboard is the msi Z77A-GD65 and randomly this morning I went to turn on the pc and I didn't get a beep or anything. The pc just shut down and restarted up again but did the same thing over and over again. Everything seems to turn on but I'm not getting the post beep anymore and the code on the mother board says 55 (Early memory initialization). Does this mean that one of my sticks of ram might be dead? How do I find out which one? Any other help or suggestions? Thanks

Quote from: Froggy Gremlin on 30-April-13, 02:39:07
After providing specs as flobelix has requested will certainly help in the troubleshooting process. First thoughts are PSU has become faulty, RAM stick(s) gone bad, or a long term OC has taken it's toll.
Test each stick individually in the primary DIMM2 slot.
Specs are:
msi Z77A-GD65 motherboard
Intel i7 2600k
12gb Corsair Vengeance ram DDR3 (3x4)
AMD Radeon HD 7850 2gb
I'm not sure what the power supply is off the top of my head but I can check if needed. I've tried testing individual sticks and I've had no luck, still keep getting the 55 error. Also I haven't done any overclocking on my machine.

Explosion after 1 month of use...(USB Charger + Lighting Cable

Similar Messages

Maybe you are looking for