Export dump directory is 100% full in TDSHL

When exporting the final package, the dump directory (mount point) is 100% therefore the final package aborted.
I only have power outage or network disconnection experience during export. This is the first time get
directory full issue.
A re-start of export_monitor.sh is enough ONCE more disk is added to there?
I remember I have to do something extra but cannot find the doc.
Would you please help share your experience on this?
Thanks!

this can be helpful : Newbie: How To find Core Dump files on Unix?! URGENT!

Similar Messages

Can I export using a single dump directory to multiple locations in oracle

I'm trying to do a full database export using expdp utility in oracle 10g. I have a single dump directory that is mapped to a particular file location say /export/dump. I don't want the entire dump file to be stored in the above path. Instead I want the dump to be distributed among multiple files. I know that this can be done using FILESIZE parameter which will distribute the contents to multiple files according to the size we have specified.
My problems comes here, I want to export my data to multiple locations, the path is different than what I mentioned above, say /first/dump. Now my question is should I create multiple dump directories for each location before exporting or can I omit directory attribute in expdp and specify the complete path in the FILE parameter itself.

No. EXPDP needs the server component LOGICAL DIRECTORY. If you don't specify the directory, it will go to the default EXPDP path which will be mostly /rdbms/log. It's defined by the parameters DATA_PUMP_DIR.
You will have to specify directory attribute if you want to point your dumpfile to go to any specific location and you cannot give the directory path in the file name in EXPDP (unlike conventional exp)

Full export dump to import schema

Hi,
I have an exp dump(datapump) of database, the command use for this:
+/******* directory=expdump DUMPFILE=HYRT.dmp logfile=HYRT_exp.log FULL=y+*
Now, I have imported the dump with the below command:
T24OWNER/******** directory=dor dumpfile=HYRT.dmp logfile=DGFRdmp.impdp.log REMAP_SCHEMA=USER:OWNER REMAP_TABLESPACE=DATAL:BDATA,INDEL:INDEX*
I have got several errors.
Is this errors occured because of the import command where I used imported a schema alone?
If I use full =y parfile in the import command, will these errors can be avoided.
Thanks in advance,
nonuday
Edited by: Nonuday on Apr 29, 2012 10:56 PM
Edited by: Nonuday on Apr 29, 2012 10:57 PM

Hi Vishwanath,
The import got completed.
I have got sum of 16164 errors and I have posted each of its kind below.
1
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
9
bf d6
0cfc6e4Sm6mfaMYwsbW2JygBepcwg/BKmJ4VZy/pO06UXsVUMejsissTcGWYR4qeK4TPqfDK
q7UPH+SmKP6nW9zmxMZnuK1VDzM0Iv9O4E4SvvsnHWn+EPF9hR+oBFe3fEro6RQ5R5Ejd1nr
e+fAK010dExf76gg/c6ZB3YxGPHDOqkGI4lV6HNsd57gKLwTd0bxan5UwJriIpt7Vjc=
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
ORA-31685: Object type FUNCTION:"SYSTEM"."WM$_CHECK_INSTALL" failed due to insufficient privileges. Failing sql is:
CREATE FUNCTION "SYSTEM"."WM$_CHECK_INSTALL" return boolean is begin return false ; end;
Processing object type DATABASE_EXPORT/SCHEMA/PROCEDURE/PROCEDURE
ORA-31685: Object type PROCEDURE:"OUTLN"."ORA$GRANT_SYS_SELECT" failed due to insufficient privileges. Failing sql is:
CREATE PROCEDURE "OUTLN"."ORA$GRANT_SYS_SELECT" as
begin
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$ TO SELECT_CATALOG_ROLE';
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$HINTS TO SELECT_CATALOG_ROLE';
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$NODES TO SELECT_CATALOG_ROLE';
end;
ORA-31685: Object type PROCEDURE:"SYSTEM"."ORA$_SYS_REP_AUTH" failed due to insufficient privileges. Failing sql is:
CREATE PROCEDURE "SYSTEM"."ORA$_SYS_REP_AUTH" as
begin
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.repcat$_repschema TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.repcat$_repprop TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.def$_aqcall TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/ALTER_FUNCTION
ORA-31685: Object type ALTER_FUNCTION:"SYSTEM"."WM$_CHECK_INSTALL" failed due to insufficient privileges. Failing sql is:
ALTER FUNCTION "SYSTEM"."WM$_CHECK_INSTALL" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
Processing object type DATABASE_EXPORT/SCHEMA/PROCEDURE/ALTER_PROCEDURE
ORA-31685: Object type ALTER_PROCEDURE:"OUTLN"."ORA$GRANT_SYS_SELECT" failed due to insufficient privileges. Failing sql is:
ALTER PROCEDURE "OUTLN"."ORA$GRANT_SYS_SELECT" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
ORA-31685: Object type ALTER_PROCEDURE:"SYSTEM"."ORA$_SYS_REP_AUTH" failed due to insufficient privileges. Failing sql is:
ALTER PROCEDURE "SYSTEM"."ORA$_SYS_REP_AUTH" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
Processing object type DATABASE_EXPORT/SCHEMA/VIEW/VIEW
ORA-31685: Object type VIEW:"SYSTEM"."MVIEW_WORKLOAD" failed due to insufficient privileges. Failing sql is:
CREATE FORCE VIEW "SYSTEM"."MVIEW_WORKLOAD" ("WORKLOADID", "IMPORT_TIME", "QUERYID", "APPLICATION", "CARDINALITY", "RESULTSIZE", "LASTUSE", "FREQUENCY", "OWNER", "PRIORITY", "QUERY", "RESPONSETIME") AS select
a.collectionid# as workloadid,
a.collecttime as import_time,
a.queryid# as queryid,
a.application,
a.cardinality,
a.resultsize,
a.qdate as lastuse,
a.frequency,
a.uname as o
Processing object type DATABASE_EXPORT/SCHEMA/VIEW/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39112: Dependent object type OBJECT_GRANT:"SYSTEM" skipped, base object type VIEW:"SYSTEM"."MVIEW_WORKLOAD" creation failed
Processing object type DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/PASSWORD_HISTORY
ORA-39083: Object type PASSWORD_HISTORY failed to create with error:
ORA-06550: line 1, column 33:
PLS-00201: identifier 'SYS.DBMS_PSWMG_IMPORT' must be declared
ORA-06550: line 1, column 10:
PL/SQL: Item ignored
These are the errors in the log..
I have done import from many client export dump before but they are schema level export only.
This one is full database export where I have imported only the schema from the full exp dump. Is this the reason why am getting so many errors or anything else can you throw some light.
Thanks in advance.
nonuday
Edited by: Nonuday on Apr 29, 2012 11:03 PM

Import of Table data only from Full export Dump

I want to import data inot specified tables of a databse only. Is it possible to do this from a dump file which is the full export of the another database. The database i want to import into is the mirror of the database whose export dump i want to use. Let me know if this is possible and if yes then how i could do this.
Thanking in advance.

Please check the following link for full instructions:
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/part1.htm#435787
If on another release, the same documentation is available for it on OTN as well.
Thanks!

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

Error while Exporting dump using Expdp

Hi Guru's
When i started to export schema by giving the following command
staging/********@XXXXX schemas=abcdirectory=DUMPDIR dumpfile=tnfhc_291210.dmp logfile=exp_tnfhc_291210.log schema is not exported successfully. it started to give the following error.
ORA-31694: master table "STAGING"."SYS_EXPORT_SCHEMA_10" failed to load/unload
ORA-19502: write error on file "/home/oracle/dumpdir/tnfhc_291210.dmp", blockno 263773 (blocksize=4096)
ORA-27072: File I/O error
Additional information: 4
Additional information: 263773
Additional information: 131072
Job "STAGING"."SYS_EXPORT_SCH
{code}
Kindly help to take backup..
Thanks & Regards
Sami.

ORA-19502: write error on file "/home/oracle/dumpdir/tnfhc_291210.dmp", blockno 263773 (blocksize=4096)
ORA-27072: File I/O error
Additional information: 4some sort of Operating System error; like volume is 100% full
what clues exist in OS log files?

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

Export dump(logical backup) runing since yesterday

Hi to All,
We are taking full export dump(logical backup) of database.till last week its fine on sunday we change the password of administrator and we forgot to change to password in this scheduled scripts.and yesterday i run this backup manullay in morning and i saw its affecting our performance I cancel this task in middle only I haven't deleted that files from backup location and I had given the password in that scirpts and that scripts runing and that scripts started runing at there aproprite time but the incomplete backup is existed at backup location and the backup which started at scheduled time is runing since yesterday before its fininsh in 2 or 3 hours but know its runing since yesterday.Please give me some solution.
Thanks and Regards
Mohd Khaja

On windows it gets a bit hairy as there really is no clean and nice way of doing it.There are a couple of options.
1. If you can rely on dateformat not changing, you can use a static substring expression. For example, the following might work w/ finnish locale echo %date:~3,2%%date:~6,2%%date:~9,4%Similarly, when you know the dateformat you can tokenize the output of 'date /t' and discard the tokens you don't want.
2. You can set dateformat to your liking and then just use %date% in your script
3. You can run a "SELECT to_char(sysdate,..." into a file and then read that file in your script.
4. Simon Sheppard also has a solution you could use as a basis. I have a slight issue with the approach, but that could just be me.
5. Use gnuwin32 or similar ;)
Also note that %date% env var is set automatically from w2k onwards, so some of the solutions might not work w/ older versions.

Getting Datapump Export Dump file to the local machine

I apologize to everyone as this is a duplicate post.
Re: Getting Datapump Export Dump file to the local machine
My initial thread(started yesterday)was in 'Database General' and didn't get much response today. Where do i post questions on EXPORT/IMPORT utilities?
Anyway, here is my problem:
I want to take the export dump of itemrep schema in orcl database (in a remote machine). I have an Oracle server (10G Rel2) running in my local Windows machine. I have created a user john with necessary EXPORT/IMPORT privileges in my local db. Then i created a Directory object,ie a folder named datapump in my local hard drive and granted READ WRITE privileges to john.
So john, who is a user in my local machine's oracle db is going to run the expdp utility.
expdp john/jhendrix@my_local_db_alias SCHEMAS=itemrep directory=datapump logfile=itemrepexp.log
The above command will fail because it will look for itemrep schema inside my local db, not the remote db where the itemprep is actually located. And you can't qualify the schemaname with its db in the SCHEMAS parameter (like SCHEMAS=itemrep@orcl).
Can anyone provide me a solution for this?

I think you can initiate the datapump exp utility from your client machine to export a schema in a remote database.But, Upon execution,oracle looks for the directory in the remote database and not on your local machine.
You're inovoking expdp from a client (local DB) to export data from a remote DB.
So, With this method, you can create the dumpfiles only on the Remote server and not on the local Machine.
You can perform a direct import instead of export using the NETWORK_LINK option.
Create a DBlink from your local and Remote DB and verify the connection.
Then,Initiate the Impdp from Your local machine DB using the parameter network_link=<db_link of the Remote DB> to import the schema.
The advantage of this option eliminates the Dumpfile creation at the Server side.
There are no dumpfiles during the import process. the Data is imported directly to the target schema.

Database Restore Using Export Dump File

I have searched a lot of books and web sites, but cannot find the exact procedure as to how to restore full oracle database using the export dump file and the import utility.
Does anyone have any ideas.
Paltform: W2K AD Svr, Oracle 9.2.0.6.
Please advice

Hi, I was able to create the db using dbca, and then import.
When I first imported, I got messages all over that user or objects did not exist. So I commented the line which would invoke the CreateDBCatalog.sql script.
And now I get this,
C:\>imp '/ as sysdba' file=z:\export\tuethusat\dbname_full_export.dmp full=y
Import: Release 9.2.0.1.0 - Production on Tue Oct 24 15:30:03 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00023: Import views not installed, please notify your DBA
IMP-00000: Import terminated unsuccessfully
C:\>
Any suggestions?

Oracle is 100% full

I am using ECC6.0.Here I wanted to make path from Production to development.but there is problem regarding client export. in UNIX command it shows Oracle space is 100% full.So what are the steps are to be taken?
please give me a suggesation

Hi,
When the oracle 100% try to delete unwanted files or move some where.
or check if you can delete 'core' files:
find /oracle -name core -exec rm {} \;
Please check SAP note 16513 will help you.
With Regards,
Krishna.

Is there a way to take export dump with only selected objects

Hi,
I want to take a partial export dump containing only few objects of a particular schema in Oracle 10g DB.
I am trying to use "exp" utility for this.
The parfile used for this is as follows:
FILE=CSG_Objects.dmp
FULL=n
ROWS=y
COMPRESS=y
INDEXES=y
TRIGGERS=y
CONSTRAINTS=y
LOG=export_CSG_Objects.log
TABLES=table1,table2,table3...
With this I can only export tables but not other objects like views, procedures, sequences etc.
If I try to use other object name in TABLES list, I get errors.
Is there any way I could export other "selected" objects also?
Thanks & Regards,
Ullhas

There are 4 modes in exp and expdp. You can specify
full=y which will get all objects in the database
schemas = list which will get alll of the objects in these schemas
tables = list which get all of the tables in your list plus all of the objects dependent
on these tables
tablespaces=list which finds all fo the tables in those tablespaces and then does a table mode
export for the table list, including dependent objects.
Other than excluding/included a few objects, original exp does not have a way to specifically include certain objects. This was one of the enhancements to datapump expdp/impdp.
If you are running 10.1 or later, you can use datapump export/import. Now, you can do a table mode export and put in an include/exclude list.
include=tables,grants,table_statistics
or
exclude grants, index_statistics
If you let us know what you are trying to include or exclude, it would be easier to come up with a solution.
Dean

Finding create user statement using the export dump

I have an Oracle export dump and it is a schema level export only.
Is there any way that I can get the create user statement from that dump using import full=y show=y ?
How do I identify the create user statement once I did the show=y

Yes with full export this is possible because full export will create all schemas but this is not possible with schema level export because schema level import does not recreate schema.

Why export dump shows less than the actual size?

why export dump shows less than the actual size?

i tried to find to find out the logical size using the following command
select sum(bytes/1024/1024) from dba_segments;
SUM(BYTES/1024/1024)
739when i tried the following query removing index segement:
select sum(bytes/1024/1024) from dba_segments where SEGMENT_TYPE \<\> 'INDEX' ;
SUM(BYTES/1024/1024)
535What other type of information is not exported in a full database export?

Avoiding BLOB in export dump

Hi All,
I am taking export of entire database. Since this database contains tables with BLOB datatype, my export dump's size is 4GB where as usually it would be around 100-200MB. I want to exclude these tables in my export. Is there a way to do so. My database contains around 2000 tables.
Any help on this would be deeply appreciated.

this is one way i can think.
user user_tab_columns to identify tables with BLOB datatype.
add these list in the EXCLUDE parameter in expdp.

Export dump directory is 100% full in TDSHL

Similar Messages

Maybe you are looking for